Search NASA⌕ Search

SEARCH · Search NASA

Results for “hard disks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

X-ray spectra of solar flares obtained with a high-resolution bent crystal spectrometer

Preliminary results obtained for three solar flares with the bent crystal spectrometer on the SMM are presented. Resonance and satellite lines of Ca XIX and XVIII and Fe XXV and XXIV are observed together with the Fe XXVI Lyman-alpha line. Plasma properties are deduced from line ratios and evidence is presented for changes of line widths coincident with the occurrence of a hard X-ray impulsive burst. Fe K-alpha spectra from a disk center and a limb flare agree with the predictions of a fluorescence excitation model. However, a transient Fe K-alpha burst observed in a third flare may be explained by the collisional ionization of cool iron by energetic electrons.

Culhane, J. L.↗

Compact Packaging of Photonic Millimeter-Wave Receiver

A carrier structure made from a single silicon substrate is the basis of a compact, lightweight, relatively inexpensive package that holds the main optical/electronic coupling components of a photonic millimeter-wave receiver based on a lithium niobate resonator disk. The design of the package is simple and provides for precise relative placement of optical components, eliminating the need for complex, bulky positioning mechanisms like those commonly used to align optical components to optimize focus and coupling. Although a prototype of the package was fabricated as a discrete unit, the design is amenable to integration of the package into a larger photonic and/or electronic receiver system. The components (see figure) include a lithium niobate optical resonator disk of 5-mm diameter and .200- m thickness, positioned adjacent to a millimeter- wave resonator electrode. Other components include input and output coupling prisms and input and output optical fibers tipped with ball lenses for focusing and collimation, respectively. Laser light is introduced via the input optical fiber and focused into the input coupling prism. The input coupling prism is positioned near (but not in contact with) the resonator disk so that by means of evanescent-wave coupling, the input laser light in the prism gives rise to laser light propagating circumferentially in guided modes in the resonator disk. Similarly, a portion of the circumferentially propagating optical power is extracted from the disk by evanescent-wave coupling from the disk to the output coupling prism, from whence the light passes through the collimating ball lens into the output optical fiber. The lens-tipped optical fibers must be positioned at a specified focal distance from the prisms. The optical fibers and the prisms must be correctly positioned relative to the resonator disk and must be oriented to obtain the angle of incidence (55 in the prototype) required for evanescent-wave coupling of light into and out of the desired guided modes in the resonator disk. To satisfy all these requirements, precise alignment features are formed in the silicon substrate by use of a conventional wet-etching process. These features include a 5-mm-diameter, 50- m-deep cavity that holds the disk; two trapezoidal-cross-section recesses for the prisms; and two grooves that hold the optical fibers at the correct positions and angles relative to the prisms and disk. The fiber grooves contain abrupt tapers, near the prisms, that serve as hard stops for positioning the lenses at the focal distance from the prisms. There are also two grooves for prismadjusting rods. The design provides a little slack in the prism recesses for adjusting the positions of the prisms by means of these rods to optimize the optical coupling.

Nguyen, Hung↗

Can a variable alpha induce limit cycle behavior and exponential luminosity decay in transient soft x ray sources?

There has been, recently, a revival of the stability problem of accretion disks. Much of this renewed interest is due to recent observational data on transient soft X-ray novae, which are low-mass X-ray binaries. It is widely believed that nonsteady mass transfer from the secondary onto the compact primary, through an accretion disk, is the reason for the observed spectacular events in the form of often repetitive outbursts, with recurrence times ranging from 1 to 60 yr and duration time on the scale of months. Though not having reached yet a consensus about the nature of the mechanism that regulates the mass transfer, the disk thermal instability model seems to be favored by the fact that the rise in the hard X-ray luminosity is prior to the rise in the soft X-ray luminosity, while the mass transfer instability model seems to be hindered by the fact that the luminosity during quiescence is unable to trigger the thermal instability. However, it should be stressed that, remarkably, the X-ray light curves of these X-ray novae all show overall exponential decays, a feature quite difficult to reproduce in the framework of the viscous disk model, which yields powerlike luminosity decay. Taking into account this observational constraint, we have studied the temporal evolution of perturbations in the accretion rate, under the assumption that alpha is radial and parameter dependent. The chosen dependence is such that the model can reproduce limit cycle behavior (the system is locally unstable but globally stable). However, the kind of dependence we are looking for in alpha does not allow us to use the usual Shakura and Sunyaev procedure in the sense that we no longer can obtain a linearized continuity equation without explicit dependence on the accretion rate. This is so because now we cannot eliminate the accretion rate by using the angular momentum conservation equation.

Meirellesfilho, C.↗

Discovery of Rapidly Moving Partial X-Ray Absorbers Within Cassiopeiae

Gamma Cassiopeiae is an enigmatic Be star with unusually strong hard X-ray emission. The Suzaku observatory detected six rapid X-ray spectral hardening events called "softness dips" in a approx.100 ks observation in 2011. All the softness dip events show symmetric softness-ratio variations, and some of them have flat bottoms apparently due to saturation. The softness dip spectra are best described by either approx.40% or approx.70% partial covering absorption to kT approx.12 keV plasma emission by matter with a neutral hydrogen column density of approx.(2−8) ×10(exp 21)/sq cm, while the spectrum outside these dips is almost free of absorption. This result suggests the presence of two distinct X-ray-emitting spots in the gamma Cas system, perhaps on a white dwarf (WD) companion with dipole mass accretion. The partial covering absorbers may be blobs in the Be stellar wind, the Be disk, or rotating around the WD companion. Weak correlations of the softness ratios to the hard X-ray flux suggest the presence of stable plasmas at kT approx 0.9 and 5 keV, which may originate from the Be or WD winds. The formation of a Be star and WD binary system requires mass transfer between two stars; gamma Cas may have experienced such activity in the past.

tars: emission-line↗

The Kuiper Belt, Exozodiacal Dust, Debris Disks: It's All About Collisions

Debris disks around other stars, like the disks around Fomalhaut, Vega, and Epsilon Eridani, are often described as more massive versions of the Kuiper Belt. But for a long time, it's been hard to test this notion, because grain-grain collisions dominate the grain lifetimes and we lacked the tools to model the effect of collisions on the appearance of the disks. I'll describe a new breakthrough that has allowed us to make 3-D models of collisions in debris disks and exozodiacal clouds for the first time, and I'll show the latest supercomputer simulations of these systems, illustrating the effects of planets and collisions in sculpting these disks. These models will be the key to interpreting debris disk images from HST, Herschel, SOFIA, JWST, and ALMA, as well as understanding the exozodiacal dust backgrounds for direct imaging of exo-Earths.

Kuchner, Marc↗

Higher order diffractions from a circular disk

The backscattering from a circular disk is analyzed using the geometrical theory of diffraction. First-, second-, and third-order diffractions are included in the hard polarization analysis, while first-, second-, and third-order slope diffractions are included for soft polarization. Improvements in the prediction of the monostatic radar cross section over previous works are noted. For hard polarization, an excellent agreement is exhibited between experimental and theoretical results, while a very good agreement is noted for soft polarization. To further improve the soft polarization results for wide angles, a model for the creeping wave or circulating current on the edge of the disk is obtained and used to find an additional component of the backscattered field. The addition of this component significantly improves the results for wide angles, leading to excellent agreement for soft polarization also. An axial-caustic correction method using equivalent currents is also included in the analysis.

Marsland, Diane P.↗

Co1lisional Grooming Models of the Kuiper Belt Dust Cloud

Debris disks around other stars, like the disks around Fomalhaut, Vega, and Epsilon Eridani, are often described as more massive versions of the Kuiper Belt. But for a long time, it's been hard to test this notion, because grain-grain collisions limit the grain lifetimes and we lacked the tools to model the effects of these collisions on the appearance of the disks. I'll describe a new breakthrough that has allowed us to make 3-D models of grain-grain collisions in debris disks for the first time, and I'll show the latest supercomputer simulations of these systems, illustrating how planets and collisions together sculpt the TNO dust.

Kuchner, Marc↗

K alpha line emission during solar X-ray bursts

The expected flux of K alpha line emission from sulfur, argon, calcium, and iron is calculated during both thermal and nonthermal solar X-ray events. Such emission is shown to be weak during the course of most of the nonthermal hard X-ray bursts that Kane and Anderson (1970) have observed. If Compton backscattering is significant at high energies, the flux is reduced still further for disk flares, but it is noted that the strong, near-limb burst of June 26 would have produced about 100 photons /sq cm/sec of sulfur and iron K alpha emission. The impulsive hard X-ray bursts may in general be too short-lived for much K alpha emission. It may be noted that sulfur K alpha emission in particular depends sensitively on the lower-energy limit of the nonthermal electron spectrum, assuming such a sharply defined boundary exists. During soft X-ray bursts, when temperatures of a few 10 to the 7th power K are obtained, K alpha emission from certain iron ions, specifically Fe XVIII-XXIII, may be important.

Phillips, K. J. H.↗

Multiwavelength monitoring of the BL Lacertae object PKS 2155-304. 4: Multiwavelength analysis

Simultaneous X-ray, ultraviolet, optical, infrared, and radio monitoring data were used to test and constrain models of continuum emission from the BL Lacertae object PKS 2155-304. Intensively sampled ultraviolet and soft X-ray light curves showed a clear temporal correlation with the X-rays leading the ultraviolet by 2-3 hr. This lag was found to be significantly different from zero after an exhaustive comparison of four different techniques for measuring temporal correlations. Variations in the ultraviolet trough optical wave bands were also strongly correlated, with no measurable lag down to limiting timescales of approximately less than 1-2 hr. This strong correlation extends to the near-infrared, but the less intensive sampling precludes measurement of any lag beyomnd an upper limit of approximately less than 1 day. These lags and limits of the order of hours are much shorter than most rapid observed single-band variations. Because of the very sparse radio sampling, it was not possible to measure quantitatively the correlation and lag with shorter wavelengths, but the data do suggest that the radio may lag the optical/ultraviolet by approximately 1 week, with longer delays and weaker variations to longer radio wavelengths. The epoch-folding Q(exp 2) statistic was used to test for periodicity, and no evidence for strict or quasi-periodicity was found in any of the light curves. Because they lead the lower frequencies, the soft X-rays (approximately less than 1 keV) cannot arise from synchrotron self-Compton scattering. These results also rule out the accretion disk model, which predicts a measurable lag between ultraviolet/optical wavelength bands and a correlation between hardness and brightness, neither of which were seen. They are consistent with the entire radio through X-ray continuum arising from direct synchrotron emission from a relativistic jet. However, the tapered jet model, in which the X-ray emission is produced closer in, has problems explaining the magnitude of the ultraviolet/X-ray lag, because the X-ray-emitting electrons have very short lifetimes (t(sub 1/2) much less than 1 s). The result that the lag is much smaller than the variability timescale suggests instead that the radiation may be produced in a flattened region such as a shock front.

Edelson, R.↗

Long Duration Exposure Facility experiment M0003 deintegration observation data base

The four trays (2 leading edge and 2 trailing edge) of the M0003 materials experiment on the Long Duration Exposure Facility (LDEF) contained 1274 samples from 20 subexperiments. The complete sample complement represented a broad range of materials, including thin film optical coatings, paints, polymer sheets and tapes, adhesives, and composites, for use in various spacecraft applications, including thermal control, structures, optics, and solar power. Most subexperiments contained sets of samples exposed on both the leading and trailing edge trays of LDEF. Each individual sample was examined by high resolution optical microscope during the deintegration of the subexperiments from the M0003 trays. Observations of the post-flight condition of the samples made during this examination were recorded in a computer data base. The deintegration observation data base is available to requesters on floppy disk in 4th Dimension for the Macintosh format. Over 3,000 color macrographs and photomicrographs were shot to complement the observation records and to document the condition of the individual samples and of the M0003 trays. The photographs provide a visual comparison of the response of materials in leading and trailing edge LDEF environments. The Aerospace Corporate Archives is distributing photographs of the samples and hard copies of the database records to the general public upon request. Information on obtaining copies of the data base disks and for ordering photographs and records of specific samples or materials are given.

Gyetvay, S. R.↗

Simultaneous X-ray and optical observations of GX 339-4 in an X-ray high state

Optical emission, soft X-rays, and hard X-rays have been observed simultaneously from the black hole candidate GX 3339-4 in a typical high state. Each of these components is interpreted as arising from a characteristic region of the accretion disk. Considered as a black hole, GX 339-4 lacks the variable 2 keV blackbody component that would be emitted from the 'solid' surface of a neutron star in the low-mass neutron star binaries. The X-ray emission in the high state is therefore extremely soft and stable in time. The intermediate disk region is optically thick and geometrically thin. The observed soft X-ray component with a 'disk blackbody' spectrum comes from this region. The innermost disk region is dynamically unstable due to the effect of general relativity and possibly due to radiation pressure. This region is responsible for the generation of the hard X-ray tail through Comptonization.

Makishima, K.↗

Observational evidence for thin AGN disks

AGN spectrum and spectral features, polarization, inclination, and X-ray line and continuum reflection features are discussed in a critical way in order to determine the ones that are the least model-dependent. The sign and strength of absorption and emission edges are found to be model-dependent, and relativistic broadening and shifting makes them hard to detect. The presence or absence of the predicted Lyman edge polarization feature may be used as a decisive test for thin, bare AGN disks. Other good model-independent tests are several inclination-related line and continuum correlations in big AGN samples. It is shown that electron temperature near the surface of the disk can greatly exceed the disk equilibrium temperature, which causes deviations from LTE. This effect must be incorporated into realistic disk models.

Netzer, Hagai↗

X-ray Observations of the Black Hole Transient 4U 1630-47 During 2 Years of X-ray Activity

The black hole candidate (BHC) X-ray transient 4U 1630-47 continuously produced strong X-ray emission for more than 2 years during its 2002-2004 outburst, which is one of the brightest and longest outbursts ever seen from this source. We use more than 300 observations made with the Rossi X-Ray Timing Explorer (RM E) to study the source throughout the outburst, along with hard X-ray images from the International Gamma-Ray Astrophysics Laboratory (INTEGRAL), which are critical for interpreting the RXTE data in this crowded field. The source exhibits extreme behaviors, which can be interpreted as an indication that the system luminosity approaches the Eddington limit. For 15 observations, fitting the spectral continuum with a disk-blackbody plus power-law model results in measured inner disk temperatures between 2.7 and 3.8 key and such temperatures are only rivaled by the brightest BHC systems, such as GRS 1915+105 and XTE 51550-564. If the high temperatures are caused by the dominance of electron scattering opacity in the inner regions of the accretion disk, it is theoretically required that the source luminosity be considerably higher than 20% of the Eddington limit. We detect a variety of high-amplitude variability, including hard 10-100 s flares, which peak at levels as much as 2-3 times higher than nonflare levels. This flaring occurs at the highest disk luminosities in a regime in which the source deviates from the L(sub disk) infinity T(sup 4)(sub in) relationship that is seen at lower luminosities, possibly suggesting that we are seeing transitions between a Shakura & Sunyaev disk and a "slim" disk, which is predicted to occur at very high mass accretion rates. The X-ray properties in 2002-2004 are significantly different from those seen during the 1998 outburst, which is the only outburst with detected radio jet emission. Our results support the "jet line" concept recently advanced by Fender and coworkers. Our study allows for a test of the quantitative McClintock & Remillard spectral state definitions, and we find that these definitions alone do not provide a complete description of the outburst. Finally, for several of the observations, the high-energy emission is dominated by the nearby sources IGR 516320-4751 and IGR 516358-4726, and we provide information on when these sources were bright and on the nature of their energy spectra

Tomsick, John A.↗

The radiative deceleration of ultrarelativistic jets in active galactic nuclei

A detailed study of the dynamical interaction between a highly relativistic jet and the thermal radiation field from an AGN accretion disk is reported, and the Comptonized spectrum arising from this interaction is self-consistently determined. A simple model that captures the essential radiative and geometrical features of realistic disk configurations is presented, and the disk radiation field is calculated. The results confirm Phinney's (1987) suggestion that the thermal radiation field produced by accretion in an AGN could be very effective in decelerating ultrarelativistic jets that are accreted by electromagnetic or hydromagnetic forces closer to the central black hole. Terminal Lorentz factors are consistent with the values inferred in superluminal radio sources are readily produced in this model for plausible disk and jet parameters without additional acceleration in the interaction zone. A new interpretation of the hard X-ray component detected in BL Lac spectra is proposed.

Melia, Fulvio↗

Asymmetric 511 keV Positron Annihilation Line Emission from the Inner Galactic Disk

A recently reported asymmetry in the 511 keV gamma-ray line emission from the inner galactic disk is unexpected and mimics an equally unexpected one in the distribution of LMXBs seen at hard X-ray energies. A possible conclusion is that LMXBs are an important source of the positrons whose annihilation gives rise to the line. We will discuss these results, their statistical significance and that of any link between the two. The implication of any association between LMXBs and positrons for the strong annihilation radiation from the galactic bulge will be reviewed.

Skinner, Gerry↗

The correlated X-ray and optical time variability of TT Arietis

The results of Einstein X-ray observation and simultaneous optical observations of the cataclysmic variable TT Arietis extending over several binary orbits are reported. Evidence is found for correlations between the X-ray and optical variability of TT Ari on three distinct time scales: the 3.3 hour variability that has been associated with the orbital period of the star, the about 1000 s time scale of the irregular flickering activity, and the time scale of quasi-coherent oscillations which have periods of order 10 s. There is a modulation of the X-ray flux with a period consistent with the orbital period of approximately 200 minutes, but there is no apparent modulation of the X-ray spectrum. The optical flux is modulated with a similar period and may lag the X-ray modulation by about 0.1 in phase. The X-ray spectrum is well fitted by a thermal bremsstrahlung plus Gaunt factor model. The results suggest that the hard X-ray emission may be produced in a corona above and below the inner accretion disk.

Jensen, K. A.↗

Friction behavior of 304 stainless steel of varying hardness lubricated with benzene and some benzyl structures

The lubricating properties of some benzyl and benzene structures were determined by using 304 stainless steel surfaces strained to various hardness. Friction coefficients and wear track widths were measured with a Bowden-Leben type friction apparatus by using a pin-on-disk specimen configuration. Results obtained indicate that benzyl monosulfide, dibenzyl disulfide, and benzyl alcohol resulted in the lowest friction coefficients for 304 stainless steel, while benzyl ether provided the least surface protection and gave the highest friction. Strainhardening of the 304 stainless steel prior to sliding resulted in reduced friction in dry sliding. With benzyl monosulfide, dibenzyl disulfide, and benzyl alcohol changes in 304 stainless steel hardness had no effect upon friction behavior.

Buckley, D. H.↗

Discovery of Photon Index Saturation in the Black Hole Binary GRS 1915+105

We present a study of the correlations between spectral, timing properties and mass accretion rate observed in X-rays from the Galactic Black Hole (BH) binary GRS 1915+105 during the transition between hard and soft states. We analyze all transition episodes from this source observed with Rossi X-ray Timing Explorer (RXTE), coordinated with Ryle Radio Telescope (RT) observations. We show that broad-band energy spectra of GRS 1915+105 during all these spectral states can be adequately presented by two Bulk Motion Comptonization (BMC) components: a hard component (BMC1, photon index Gamma(sub 1) = 1.7 -- 3.0) with turnover at high energies and soft thermal component (BMC2, Gamma(sub 2) = 2.7 -- 4.2) with characteristic color temperature < or = 1 keV, and the red-skewed iron line (LAOR) component. We also present observable correlations between the index and the normalization of the disk "seed" component. The use of "seed" disk normalization, which is presumably proportional to mass accretion rate in the disk, is crucial to establish the index saturation effect during the transition to the soft state. We discovered the photon index saturation of the soft and hard spectral components at values of < or approximately equal 4.2 and 3 respectively. We present a physical model which explains the index-seed photon normalization correlations. We argue that the index saturation effect of the hard component (BMC1) is due to the soft photon Comptonization in the converging inflow close to 1311 and that of soft component is due to matter accumulation in the transition layer when mass accretion rate increases. Furthermore we demonstrate a strong correlation between equivalent width of the iron line and radio flux in GRS 1915+105. In addition to our spectral model components we also find a strong feature of "blackbody-like" bump which color temperature is about 4.5 keV in eight observations of the intermediate and soft states. We discuss a possible origin of this "blackbody-like" emission.

Titarchuk, Lev↗