Search NASA⌕ Search

SEARCH · Search NASA

Results for “high explosive experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Inductive Measurement of Plasma Jet Electrical Conductivity

An inductive probing scheme, originally developed for shock tube studies, has been adapted to measure explosive plasma jet conductivities. In this method, the perturbation of an applied magnetic field by a plasma jet induces a voltage in a search coil, which, in turn, can be used to infer electrical conductivity through the inversion of a Fredholm integral equation of the first kind. A 1-inch diameter probe was designed and constructed, and calibration was accomplished by firing an aluminum slug through the probe using a light-gas gun. Exploratory laboratory experiments were carried out using plasma jets expelled from 15-gram high explosive shaped charges. Measured conductivities were in the range of 3 kS/m for unseeded octol charges and 20 kS/m for seeded octol charges containing 2% potassium carbonate by mass.

Turner, Matthew W.↗

Moderate Velocity Ball Impact of a Mock High-Explosive

Modeling of thermal and mechanical events in high-explosive materials is complicated by the composite nature of the material, which experiences viscoelastic and plastic deformations and sustains damage in the form of microcracks that can dominate its overall behavior. A mechanical event of interest is projectile interaction with the material, which leads to extreme local deformation and adiabatic heating, which can potentially lead to adverse outcomes in an energetic material. Simulations of such an event predicted large local temperature rises near the path of a spherical projectile, but these were experimentally unconfirmed and hence potentially non-physical. This work concerns the experimental verification of local temperatures both at the surface and in the wake of a spherical projectile penetrating a mock (unreactive) high-explosive at {approx}700 m/s. Fast response thermocouples were embedded radially in a mid-plane of a cylindrical target, which was bonded around the thermocouples with epoxy and recorded by an oscilloscope through a low-pass filter with a bandwidth of 500 Hz. A peak temperature rise of 70 K was measured both at the equator of the projectile and in its wake, in good agreement with the temperature predicted in the minimally distorted elements at those locations by a finite element model in ABAQUS employing the ViscoSCRAM constitutive model. Further work is needed to elucidate the extreme temperature rises in material undergoing crushing or fragmentation, which is difficult to predict with meshed finite element methods due to element distortion, and also challenging to quantify experimentally.

36 MATERIALS SCIENCE↗

ALT-3 Target & CMU Version 4

The third Advance Liner Technology (ALT-3) experiment is the next in a long tradition of collaborations between LANL and RFNC/VNIIEF in high-explosive pulsed-power. Here a VNIIEF provided Disk Explosive Magnetic Generator (DEMG) will drive a LANL provided experimental load and diagnostic package. The objective of the experiment is to explore the use of a cylindrical liner-ontarget in tera-Pascal equation of state measurement. This presentation will discuss version 4 of the experimental target and central measuring unit (CMU) along with R & D already performed in fabrication of the target.

36 MATERIALS SCIENCE↗

The Origins of Blast-Loaded Vessels

As the Manhattan Project shifted to the theory of implosion assembly in 1944, plutonium was extremely rare and large uncertainties surrounded the function of the Gadget. For these reasons, a team within the Manhattan Project began another ambitious experiment: to confine the effects of detonating two tons of high explosives and enable the recovery of precious plutonium! No data existed on the subject, and the team faced numerous challenges as they engineered what is believed to be the world’s first blast-loaded confinement vessel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

xRage: HE Initiation Models

The xRage code contains three HE ignition models: Forest Fire, Cerro Grande and Ignition and Growth. After describing these models we present results of verification and validation (V and V) tests. These include simulations to determine the Pop-plot for each model and comparision with embedded velocity gauge data for shock-to-detonation transition (SDT) experiments. The data for the SDT experiments on PBX 9502 is taken from the recently developed high explosive database (HED). The HED data files contains additional meta-data with the key experimental parameters. This enables the use of scripts to automate testing: generating xRage input file, running simulation and generating comparison plots with experimental and simulated data. The simulations show that the models are robust. But there is a mesh dependence with the time for transition-to-detonation varying by several tenths of microseconds. After the transition to a detonation wave, the detonation speed and pressure may vary by a few per cent.

36 MATERIALS SCIENCE↗

Low-gravity impact experiments: Progress toward a facility definition

Innumerable efforts were made to understand the cratering process and its ramifications in terms of planetary observations, during which the role of gravity has often come into question. Well known facilities and experiments both were devoted in many cases to unraveling the contribution of gravitational acceleration to cratering mechanisms. Included among these are the explosion experiments in low gravity aircraft, the drop platform experiments, and the high gravity centrifuge experiments. Considerable insight into the effects of gravity was gained. Most investigations were confined to terrestrial laboratories. It is in this light that the Space Station is being examined as a vehicle with the potential to support otherwise impractical impact experiments. The results of studies performed by members of the planetary cratering community are summarized.

Cintala, M. J.↗

Combined curing as a novel approach to improve resistance of ultra-high performance concrete to explosive spalling under high temperature and its mechanical properties

Highlights: • The combined curing can significantly enhance the resistance of UHPC to explosive spalling under high temperature. • The combined curing can improve the mechanical properties of UHPC remarkably. • Both further hydration of residual cement and pozzolanic reaction are activated under a high temperature steam condition. - Abstract: The influence of a combined curing composed of precuring in hot water and heating in dry air on mechanical properties and explosive spalling of ultra-high performance concrete (UHPC) subjected to high temperature was investigated in this experiment. Meanwhile, the microstructure of UHPC was determined by means of X-ray diffraction (XRD) with Rietveld method, thermogravimetric analysis (TGA), scanning electron microscope (SEM) and mercury intrusion porosimetry (MIP). The results indicate that the combined curing improves the mechanical properties of UHPC remarkably. More importantly, it is quite efficient to enhance the resistance of UHPC to explosive spalling under high temperature, which should be a novel approach to prohibit spalling occurrence, different from adding polypropylene fiber. During dry air heating in the combined curing, a high temperature steam environment is established in the dense structure framework of UHPC formed in the preceding hot water curing. Both further hydration of residual cement and pozzolanic reaction of mineral admixtures can be activated during the dry air heating, leading to not only the formation of a large amount of dense hydrates (such as C-S-H gels, katoite, tobermorite and xonotlite, etc.), which accumulate in the aforementioned existing framework, but also the consumption of most of internal free water. Therefore, both mechanical properties of UHPC and its resistance to explosive spalling under high temperature can be enhanced significantly.

36 MATERIALS SCIENCE↗

Systematic approach to verification and validation: High explosive burn models

Most material models used in numerical simulations are based on heuristics and empirically calibrated to experimental data. For a specific model, key questions are determining its domain of applicability and assessing its relative merits compared to other models. Answering these questions should be a part of model verification and validation (V and V). Here, we focus on V and V of high explosive models. Typically, model developers implemented their model in their own hydro code and use different sets of experiments to calibrate model parameters. Rarely can one find in the literature simulation results for different models of the same experiment. Consequently, it is difficult to assess objectively the relative merits of different models. This situation results in part from the fact that experimental data is scattered through the literature (articles in journals and conference proceedings) and that the printed literature does not allow the reader to obtain data from a figure in electronic form needed to make detailed comparisons among experiments and simulations. In addition, it is very time consuming to set up and run simulations to compare different models over sufficiently many experiments to cover the range of phenomena of interest. The first difficulty could be overcome if the research community were to support an online web based database. The second difficulty can be greatly reduced by automating procedures to set up and run simulations of similar types of experiments. Moreover, automated testing would be greatly facilitated if the data files obtained from a database were in a standard format that contained key experimental parameters as meta-data in a header to the data file. To illustrate our approach to V and V, we have developed a high explosive database (HED) at LANL. It now contains a large number of shock initiation experiments. Utilizing the header information in a data file from HED, we have written scripts to generate an input file for a hydro code, run a simulation, and generate a comparison plot showing simulated and experimental velocity gauge data. These scripts are then applied to several series of experiments and to several HE burn models. The same systematic approach is applicable to other types of material models; for example, equations of state models and material strength models.

36 MATERIALS SCIENCE↗

Isentropic compression studies using the NHMFL single turn

Magnetic isentropic compression experiments (ICE) provide the most accurate shock free compression data for materials at megabar stresses. Recent ICE experiments performed on the Sandia Z-machine (Asay, 1999) and at the Los Alamos High Explosive Pulsed Power facility (Tasker, 2006) are providing our nation with data on material properties in extreme dynamic high stress environments. The LANL National High Magnetic Field Laboratory (NHMFL) can offer a less complex ICE experiment at high stresses (up to {approx}1Mbar) with a high sample throughput and relatively low cost. This is not to say that the NHMFL technique will replace the other methods but rather complement them. For example, NHMFL-ICE is ideal for the development of advanced diagnostics, e.g., to detect phase changes. We will discuss the physics of the NHMFL-ICE experiments and present data from the first proof-of-principle experiments that were performed in September 2010.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of Forming of Magnesium Alloy by Explosive Energy

Magnesium alloy is an attractive next generation material due to its high specific strength with low weight. However, magnesium alloys has few slip lines with close-packed hexagonal lattice, and generally poor ductility at room temperature, therefore it is difficult to form this material by cold forging. It is well known that the speed of deformation of metallic materials rapidly changes at the high strain rate. For some metallic materials, it is reported that the ductility also increases at the high strain rate with this speed effect. In this study, a series of high speed impulsive compressive tests were carried. By using explosives for shock wave loading, the velocity in this experiment reached 100 m/s that can't be easily obtained in normal experiment. In this paper, the possibility of forming the AZ31 extrusion magnesium alloy using explosive-impulsive pressure is investigated. And improved ductility by the effect of high-rate deformation is observed with this alloy.

36 MATERIALS SCIENCE↗

Remediating explosive-contaminated groundwater by in situ redox manipulation (ISRM) of aquifer sediments

In situ chemical reduction of clays and iron oxides in subsurface environments is an emerging technology for treatment of contaminated groundwater. Our objective was to determine the efficacy of dithionite-reduced sediments from the perched Pantex Aquifer (Amarillo, TX) to abiotically degrade the explosives RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine), HMX (octahydro-1,3,5,7-tetranitro- 1,3,5,7-tetrazocine), and TNT (2,4,6-trinitrotoluene). The effects of dithionite/buffer concentrations, sediments-solution ratios, and the contribution of Fe(II) were evaluated in batch experiments. Results showed that reduced Pantex sediments were highly effective in degrading all three high explosives. Degradation rates increased with increasing dithionite/buffer concentrations and soil to solution ratios (1:80–1:10 w/v). When Fe(II) was partially removed from the reduced sediments by washing (citrate-bicarbonate buffer), RDX degradation slowed, but degradation efficiency could be restored by adding Fe(II) back to the treated sediments and maintaining an alkaline pH. These data support in situ redox manipulation as a remedial option for treating explosive-contaminated groundwater at the Pantex site.

54 ENVIRONMENTAL SCIENCES↗

Corrective Action Decision Document/Corrective Action Plan for Corrective Action Unit 547: Miscellaneous Contaminated Waste Sites, Nevada National Security Site, Nevada, Revision 0

The purpose of this CADD/CAP is to present the corrective action alternatives (CAAs) evaluated for CAU 547, provide justification for selection of the recommended alternative, and describe the plan for implementing the selected alternative. Corrective Action Unit 547 consists of the following three corrective action sites (CASs): (1) CAS 02-37-02, Gas Sampling Assembly; (2) CAS 03-99-19, Gas Sampling Assembly; and(3) CAS 09-99-06, Gas Sampling Assembly. The gas sampling assemblies consist of inactive process piping, equipment, and instrumentation that were left in place after completion of underground safety experiments. The purpose of these safety experiments was to confirm that a nuclear explosion would not occur in the case of an accidental detonation of the high-explosive component of the device. The gas sampling assemblies allowed for the direct sampling of the gases and particulates produced by the safety experiments. Corrective Action Site 02-37-02 is located in Area 2 of the Nevada National Security Site (NNSS) and is associated with the Mullet safety experiment conducted in emplacement borehole U2ag on October 17, 1963. Corrective Action Site 03-99-19 is located in Area 3 of the NNSS and is associated with the Tejon safety experiment conducted in emplacement borehole U3cg on May 17, 1963. Corrective Action Site 09-99-06 is located in Area 9 of the NNSS and is associated with the Player safety experiment conducted in emplacement borehole U9cc on August 27, 1964. The CAU 547 CASs were investigated in accordance with the data quality objectives (DQOs) developed by representatives of the Nevada Division of Environmental Protection (NDEP) and the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office. The DQO process was used to identify and define the type, amount, and quality of data needed to determine and implement appropriate corrective actions for CAU 547. Existing radiological survey data and historical knowledge of the CASs were sufficient to meet the DQOs and evaluate CAAs without additional investigation. As a result, further investigation of the CAU 547 CASs was not required. The following CAAs were identified for the gas sampling assemblies: (1) clean closure, (2) closure in place, (3) modified closure in place, (4) no further action (with administrative controls), and (5) no further action. Based on the CAAs evaluation, the recommended corrective action for the three CASs in CAU 547 is closure in place. This corrective action will involve construction of a soil cover on top of the gas sampling assembly components and establishment of use restrictions at each site. The closure in place alternative was selected as the best and most appropriate corrective action for the CASs at CAU 547 based on the following factors: (1) Provides long-term protection of human health and the environment; (2) Minimizes short-term risk to site workers in implementing corrective action; (3) Is easily implemented using existing technology; (4) Complies with regulatory requirements; (5) Fulfills FFACO requirements for site closure; (6) Does not generate transuranic waste requiring offsite disposal; (7) Is consistent with anticipated future land use of the areas (i.e., testing and support activities); and (8) Is consistent with other NNSS site closures where contamination was left in place.

54 ENVIRONMENTAL SCIENCES↗

Spall strength and ejecta production of gold under explosively driven shock wave compression

Explosively driven shock wave experiments were conducted to characterize the spall strength and ejecta production of high-purity cast gold samples. The samples were from 0.75 to 1.84 mm thick and 30 mm in diameter. Peak stresses up to 44 GPa in gold were generated using PBX-9501 high explosive. Sample free surface and ejecta velocities were recorded using photonic Doppler velocimetry techniques. Lithium niobate pins were used to quantify the time dependence of the ejecta density and the total ejected mass. An optical framing camera for time-resolved imaging and a single-image x-ray radiograph were used for additional characterization. Free surface velocities exhibited a range of spall strengths from 1.7 to 2.4 GPa (mean: 2.0 ±0.3 GPa). The pullback signals were faint, minimal ringing was observed in the velocity records, and the spall layer continued to decelerate after first pull back. These results suggest finite tensile strength was present for some time after the initial void formation. Ejecta were observed for every sample with a roughened free surface, and the ejecta density increased with increased surface roughness, which was different in every experiment. The total ejected mass is consistent with the missing mass model.

36 MATERIALS SCIENCE↗

Experimental and theoretical investigation into the high pressure deflagration products of 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105)

Diamond anvil cell (DAC) laser ignition experiments and reactive ab initio molecular dynamics (AIMD) simulations were performed on the high explosive (HE) LLM-105 to investigate its high pressure (HP) deflagration chemistry. Raman and optical spectroscopy measurements reveal LLM-105 reacts into an opaque carbonaceous product at 4–25 GPa. At pressures >~ 27 GPa, the reaction product consists of an amorphous optically transparent solid and nitrogen (N 2 ) in the solid phase. While not a one-to-one comparison due to the small time and length scales, the HP AIMD simulations show that some of the product is molecular N 2 , in qualitative agreement with experiment, while above 20 GPa most of the product consists of large amorphous C x H y N z O k clusters. Clustering is enhanced with pressure and reduces with temperature. In the experiments with initial sample pressure >~ 25 GPa, the pressure within the DAC decreases with minimal change in DAC cavity area. At initial sample pressures of 43.9 GPa, when quenched to 0 K, simulations predict a product experiencing a lower pressure consistent with the experimental measurement at lower load pressures. In conclusion, the results are important for understanding the HP deflagration chemistry of LLM-105.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pinwheel Experiment Tantalum Shot 1 Pre-Shot Report

The purpose of this experimental series is to validate the reactive burn model in the PAGOSA hydrodynamic code. It will also help validate the EOS and Strength models for the aluminum and tantalum cylinders. C4 high explosive (HE) is used to drive an aluminum cylinder into a tantalum sandwiched PBX‐9501. The experiment will provide time of arrival (TOA) data for the burn front in the HE through the metal cylinders using Fiber Bragg Gratings (FBG). Photon Doppler Velocimetry (PDV) will provide shock wave TOA and the velocity of the inward moving cylinder. The PAGOSA code will be used to predict TOA and cylinder wall velocity using PDV and tracers.

36 MATERIALS SCIENCE↗

Active Experiments in Space: Past, Present, and Future

Between 1958 and 1962 the United States and the Soviet Union performed several nuclear detonation tests in the atmosphere, including the Starfish Prime event which involved a 1.4 Mt explosion at 400 km altitude over Johnston island on July 9, 1962 (Gombosi et al., 2017). These tests can be considered as the beginning of active experiments in space (i.e., experiments that deliberately perturb the local environment). They demonstrated the potential destructive power of high-altitude nuclear explosions, both in terms of the resulting electromagnetic pulse as well as for the creation of a potentially long-lasting artificial radiation belt from the radioactive fission debris. For instance,one of the unintended consequences of Starfish Prime was to cripple at least seven spacecraft in low-Earth orbit (LEO), about a third of the LEO spacecraft of the time (Gombosi et al., 2017).

79 ASTRONOMY AND ASTROPHYSICS↗

Detonation Soot: A New Class of Ice Nucleating Particle

Abstract Temperatures and pressures from high explosive detonations far exceed atmospheric conditions in typical combustion reactions, and consequently, detonation soot forms with physiochemical properties distinct from soot formed by combustion. In this study, samples of detonation soot from two high explosives, PBX 9502 and Composition B‐3, were analyzed. Ice nucleation experiments on soot collected after controlled detonations were conducted in the laboratory to probe immersion and contact mode freezing. Samples nucleated ice at temperatures warmer than commercially available nanodiamonds, which has a mean nucleation temperature of −20.7°C. Ice nucleation rate coefficients increase rapidly by two to three orders of magnitude below −20°C for every sample. Size‐selected 137 μm diameter particles produced during detonation in an ambient air atmosphere yield bimodal distributions of freezing temperature with primary and secondary nucleation modes centered at −20°C and −13°C, respectively. The presence of a secondary mode allows for enhanced ice nucleation rate coefficients (one to two orders of magnitude greater than samples without a secondary mode) at temperatures outside the influence of the primary mode (>−17°C). Given the observed onset nucleation temperatures of −9.2°C, our results imply that detonation soot of the type studied here would only need to reach an altitude of approximately 4 km to facilitate ice formation.

54 ENVIRONMENTAL SCIENCES↗