Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogen permeability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Ammonia Permeation Through Inorganic Membranes

Moisture probes are used in the tritium facility to measure the moisture content of the gas stream. When tritium reacts with nitrogen to form ammonia, the ammonia gas damages the sensitive moisture probe. The gas stream tested during this experiment for moisture probe protection is composed of nitrogen and argon gas in conjunction with ammonia and water vapor. The gas stream is filtered through an inorganic membrane due to the high reactivity of tritium and a residual gas analyzer (RGA) is used to measure the ammonia and water vapor in the gas stream, as well as the permeability of nitrogen and argon through the inorganic membranes. The membranes tested were boron nitride and silver. The permeability was compared for each membrane at different pressures and flow rates. Fourier-transformed infrared spectroscopy (FT-IR) was used to compare the membranes before and after ammonia permeation. Ammonia gas is a byproduct formed from tritium gas reacting with nitrogen in the gas stream, similar to the Haber Process which occurs when hydrogen reacts with nitrogen [2]. The corrosive nature of ammonia damages metals and sensitive instruments such as moisture probes. Moisture probes are essential in various gas and liquid processes for measuring the moisture content of a gas. Membrane research has found that graphene oxide membranes successfully uptake ammonia from the gas stream at a humidity of approximately 30% at which point the pores pin closed, preventing gas permeation. Further research is being conducted to find an inorganic membrane that will prevent ammonia permeation thus circumventing damage to the sensitive moisture probe. The permeation measurements for argon and nitrogen gas and water and ammonia vapor were measured at various pressures of 800, 1000, 1200, 1500, 1800, and 2000 torr. The permeability average (PA) was calculated for each filter using a Barrer calculation. The average permeations for each filter were then compared. The gas composition was measured using the RGA Nitrogen was permeated through the membranes after ammonia permeation and a FT-IR spectrum was obtained. Boron Nitride: As the nitrogen pressure increased, the permeability of the membrane decreased from 800-1200 torr and remained relatively unchanged from 1200-2000 torr. The membrane exhibited a slight decrease in argon permeability from 800-1200 torr and a slight increase from 1500-2000 torr. The boron nitride membrane when permeated with ammonia and nitrogen prevented less ammonia permeation compared to the blank filter. The boron nitride filter demonstrated a decrease in permeability after ammonia permeation. Silver Membrane: When permeated with nitrogen alone, the membrane permeability decreased from 800 torr to 1200 torr. The permeability of the membrane showed little difference as pressure increased from 1200 torr. When permeated with argon, the same phenomenon occurred but on a much smaller scale. When compared to the blank and the boron nitride membranes the silver membrane exhibited significantly lower permeability. This may be in part due to the coating on the silver membrane and differences in pore size of the membranes. During permeation with ammonium hydroxide vapor and nitrogen, the partial pressure of the ammonia increased as compared to the blank membrane. The permeability before and after permeation with ammonia and nitrogen were compared. Permeability values suggested that after being permeated with the ammonia that the permeability for lower pressures increased slightly. There was no significant change in the FT-IR spectrums before and after permeation. Future work: Continue testing various inorganic membranes for ammonia permeation. Further research chemical separation of ammonia from the gas stream, which may prove difficult due to the high reactivity of tritium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multilayer Chitin–Chitosan–Cellulose Barrier Coatings on Poly(ethylene terephthalate)

Currently, effective barrier properties over a wide range of humidity are achieved by layering multiple plastics, resulting in structures that are nearly impossible to recycle through current systems. There is strong interest in developing barriers that are recyclable, biodegradable, or compostable. Chitin and cellulose nanomaterials are promising alternatives because of their high crystallinity, renewable sourcing, strong electrostatic interactions, and potential for biodegradation or composting. In this paper, we explore the potential to create multilayer materials with effective oxygen and water vapor barrier properties at elevated humidity by combining recyclable poly(ethylene terephthalate) (PET) films with single-layer and bilayer coatings of chitin nanowhiskers (ChNWs), chitosan (CS), and cellulose nanocrystals (CNCs). The addition of CS to the ChNW suspension improved the gas barrier properties of ChNW coatings, likely by filling voids, and short ChNWs (SChNW, 114 nm) performed better than long ChNWs (LChNW, 230 nm). At the optimal mass ratio of 1:1 SChNW/CS, the oxygen permeability (OP) of SChNW/CS-coated PET films was 5.1 cm 3 μm m –2 day –1 kPa –1 versus 15.9 cm 3 μm m –2 day –1 kPa –1 for neat PET. To take advantage of electrostatic attraction and hydrogen bonding, CNC was first coated on the PET, followed by coating with ChNW/CS, resulting in an OP as low as 3.6 cm 3 μm m –2 day –1 kPa –1 at 50% relative humidity (RH), and 6.4 cm 3 μm m –2 day –1 kPa –1 at 80% RH. Furthermore, after thermal treatment (120 °C, 2.5 h), the OP dropped to 2.2 cm 3 μm m –2 day –1 kPa –1 (50% RH) and 4.8 cm 3 μm m –2 day –1 kPa –1 (80% RH). The ChNW/CS and CNC coating can be efficiently removed with alkali treatment enabling possible recycling of the coated PET films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Titanium Nitride as an Intermetallic Diffusion Barrier for Hydrogen Permeation in Palladium–Vanadium Composite Membranes

Hydrogen purification is a critical industrial process, and there are ongoing efforts to develop low-cost alternatives to palladium foil membranes. Titanium nitride (TiN) is studied as an interdiffusion barrier to enable hydrogen permeation in composite palladium–vanadium membranes. TiN was deposited via reactive sputtering, and films with the desired (200) orientation were obtained in the metallic regime at 400 °C under a 200 V bias to the substrate. The permeability of thin-film TiN was determined with palladium-based sandwich structures. TiN layers up to 10 nm resulted in a minimal decrease in flux (~20%) relative to a freestanding PdCu foil, which was attributed to the interfacial resistance. At greater thicknesses, the TiN layer was rate-limiting, and it was found that the effective permeability of the sputtered TiN thin films was ~6 × 10−12 mol s−1 m−1 Pa−0.5. Composite Pd|TiN|V|TiN|Pd membranes exhibited permeability values up to three times greater than pure palladium, exhibiting stability at 450 °C for over 100 h, with the lack of intermetallic diffusion and alloy formation being confirmed with XRD. The membranes were unstable at 500 °C, which was attributed to the instability of the thin Pd layer and loss of catalytic activity.

Biochemistry & Molecular Biology↗
DOE OSTI2022

Quantifying the Influence of Defects on Selectivity of Electrodes Encapsulated by Nanoscopic Silicon Oxide Overlayers

Encapsulation of electrocatalysts and photocatalysts with semipermeable nanoscopic oxide overlayers that exhibit selective transport properties is an attractive approach to achieve high redox selectivity. However, defects within the overlayers-such as pinholes, cracks, or particle inclusions-may facilitate local high rates of parasitic reactions by creating pathways for facile transport of undesired reactants to exposed active sites. Scanning electrochemical microscopy (SECM) is an attractive method to determine the influence of defects on macroscopic performance metrics thanks to its ability to measure the relative rates of competing electrochemical reactions with high spatial resolution over the electrode. Here, we report the use of SECM to determine the influence of overlayer defects on the selectivity of silicon oxide (SiOx) encapsulated platinum thin-film electrocatalysts operated under conditions where two competing reactions-the hydrogen evolution and Fe(III) reduction reactions-can occur. After an SECM methodology is described to determine spatially resolved selectivity, representative selectivity maps are correlated with the location of defects that are characterized by optical, electron, and atomic force microscopies. This analysis reveals that certain types of defects in the oxide overlayer are responsible for ∼60-90% of the partial current density toward the undesired Fe(III) reduction reaction. By correcting for defect contributions to Fe(III) reduction rates, true Fe(III) permeability values for the SiOxoverlayers were determined to be over an order of magnitude lower than permeabilities determined from analyses that ignore the presence of defects. Lastly, different types of defects were studied revealing that defect morphology can have varying influence on both redox selectivity and calculated permeability. This work highlights the need for spatially resolved measurements to evaluate the performance of oxide-encapsulated catalysts and understand their performance limits.

25 ENERGY STORAGE↗
DOE OSTI2025

Micro-Mechanically Guided High-Throughput Alloy Design Exploration Towards Metastability-Induced H Embrittlement Resistance

We develop a high-throughput approach for studying H embrittlement (HE)-resistance in alloys, which is based on combinatorial compositional screening of metastability effects by in situ scanning electron microscopy H-analyses. The project objective included: (i) technique development of high-throughput screening (HTS) for HE-resistance, (ii) discovery of new metallic materials with superior HE-resistance, (iii) Multiscale verification of HE-resistance of the new alloys and H-barrier layers, from atomic scale to an engineering scale. The investigation focused on a model system that enables exploration of different metastable states in Fe-based complex-concentrated alloys. Composition spread islands with hundreds of varying compositions are fabricated on a single substrate using a combinatorial co-sputtering technique. To screen these alloys, we developed and employed a home-built SEM-based integrated analysis system capable of characterizing H-permeability, H-trapping, H-influence on mechanical properties, and other material properties, as well as atomistic to continuum simulations to study the underlying physics.

08 HYDROGEN↗
DOE OSTI2023

Hydrogen and Deuterium Reactivity with Carbon Surface Impurities on the TPBAR Getter Ni Plate Studied in situ with Environmental XPS

Tritium for the U.S. Department of Energy’s Tritium Readiness Program is produced in tritium-producing burnable absorber rods (TPBARs) inserted into light-water nuclear reactors. The rods are stainless-steel-clad tubes with a permeation barrier coating and internal components. The internal components have been designed and selected to produce and retain tritium. The TPBAR incorporates a Ni-plated Zircaloy-4 getter tube to capture tritium and prevent it from reaching the rod cladding and permeating into the environment. The role of the Ni coating is to protect the Zircaloy-4 getter from oxidation while allowing for maximum tritium permeability. Ubiquitous surface impurities on the Ni, such as carbon, could limit its protective functionality and permeability if they exist in relatively large concentrations. The reactivity of impurity carbon with permeating tritium can also result in tritiated hydrocarbon impurities on the gas phase. The goal of this work is to determine quantitatively the chemical state and reactivity of potential Ni coating impurities in actual TPBAR getter samples. Using Environmental X-ray Photoelectron Spectroscopy (eXPS), a very sensitive gas/surface chemistry diagnostic, we reveal in situ the source and evolution of carbon on the Ni surface at different hydrogen and deuterium pressure conditions, and how carbon reactivity may result in hydrocarbon gas-evolution at application-relevant temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Simulation Studies of Electromagnetic Energy Absorption by Hydride Materials

This paper investigates the key parameters that contribute to electromagnetic (EM) energy absorption and heating of hydride materials which could be used to release hydrogen for use as a fuel. Our simulation study using COMSOL focuses on EM energy absorption and resulting temperature rise in a thin circular slab of hydride material using resonant dipole and loop antennas. Presented results delineate the effects of conductivity, relative permeability, antenna type and slab size on temperature rise when the distance and amount of RF power are kept fixed.

Brown, Michael A.↗
DOE OSTI2026

Stimulated geologic hydrogen: from mechanistic control to engineered rock transformation

Geologic hydrogen (GeoH 2 ) generated from subsurface iron-rich rock–water reaction (i.e., serpentinization) is emerging as a promising candidate for the next primary energy source. Yet, accelerating GeoH 2 production from geological to human timescales via enhanced serpentinization remains a formidable scientific and technical challenge. Here, in this Review, we decipher the mechanistic control and explore strategies for accelerating in situ, engineered iron-rich rock transformation into carbon-free GeoH 2 by orders of magnitude. Serpentinization rate is hindered by low porosity and permeability of source rocks, suboptimal temperatures, unfavorable water chemistry, inefficient Fe 2+ -to-Fe 3+ conversion, thermodynamic constraints, and low reactive surface area. While closed-system experiments provide valuable mechanistic insights, open-system conditions with fluid circulation are more crucial for economically viable GeoH 2 production. We assess stimulation techniques from enhanced hydrocarbon and geothermal recovery as tools to be adopted or adapted for increasing reactive surface areas for stimulated GeoH2 production. We estimate that 7.40 × 10 5 to 1.73 × 10 6 million metric tons (Mt) of hydrogen could be engineered over 20 to 50 years from about 10% iron-rich rocks within 10 km depth of continental crust. Enabling GeoH 2 as a viable energy source requires not only advancing scientific frontiers but also forming a global GeoH 2 research network and innovation ecosystem to address the critical scientific, technical, societal, economic, and policy challenges.

08 HYDROGEN↗
DOE OSTI2025

Sequential Infiltration Synthesis of Cadmium Sulfide Discrete Atom Clusters

Abstract Exposure of soft material templates to alternating volatile chemical precursors can produce inorganic deposition within the permeable template (e.g. a polymer thin film) in a process akin to atomic layer deposition (ALD). While such sequential infiltration synthesis (SIS) processes have now been demonstrated for many metal oxides, we report an SIS process for a transition metal sulfide – CdS. Gas phase dimethyl cadmium and hydrogen sulfide precursors infiltrated into poly(4‐vinylpyridine) thin films result in the 3D‐nucleation of clusters consistent with a cubane‐type Cd 4 S 4 core that are variably terminated with methyl, thiol and hydroxy capping ligands. First principles models and simulation of few‐atom Cd‐based clusters are consistent with electronic and vibrational spectroscopy and grazing‐incidence total X‐ray scattering measurements of 3D‐cluster‐arrays synthesized at 80 °C. The direct synthesis of few‐atom transition metal sulfide clusters within polymer thin films will provide a versatile new route to precision architectures for light‐absorbing materials including solar energy harvesting and conversion applications.

Jayaweera, Nuwanthaka P. [Material Science Divisio↗
DOE OSTI2025

Sequential Infiltration Synthesis of Cadmium Sulfide Discrete Atom Clusters

Exposure of soft material templates to alternating volatile chemical precursors can produce inorganic deposition within the permeable template (e.g. a polymer thin film) in a process akin to atomic layer deposition (ALD). While such sequential infiltration synthesis (SIS) processes have now been demonstrated for many metal oxides, we report an SIS process for a transition metal sulfide – CdS. Gas phase dimethyl cadmium and hydrogen sulfide precursors infiltrated into poly(4-vinylpyridine) thin films result in the 3D-nucleation of clusters consistent with a cubane-type Cd 4 S 4 core that are variably terminated with methyl, thiol and hydroxy capping ligands. First principles models and simulation of few-atom Cd-based clusters are consistent with electronic and vibrational spectroscopy and grazing-incidence total X-ray scattering measurements of 3D-cluster-arrays synthesized at 80 °C. The direct synthesis of few-atom transition metal sulfide clusters within polymer thin films will provide a versatile new route to precision architectures for light-absorbing materials including solar energy harvesting and conversion applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Deuterium permeation and retention in 316L Stainless Steel Manufactured by Laser Powder Bed Fusion

Deployment of additively manufactured materials into nuclear energy systems requires investigation of the full range of the unique environmental effects on these materials. Hydrogen isotopes are common gaseous species in nuclear reactors and exhibit ample high mobility in most materials. While hydrogen isotopes mobility in wrought stainless steel is well understood, this property is not thoroughly studied for its additively manufactured variants. In this study, we investigated the deuterium permeation and retention in 316L stainless steel manufactured by laser powder bed fusion. The results showed that the deuterium permeability in the as-built additively manufactured 316L stainless steel (AM SS316L) is greater than that of the reference wrought 316L stainless steel by a factor of 2.8. However, the stress-relieved and solution-annealed AM SS316L samples exhibit lower deuterium permeability in comparison with the as-built condition. Following the solution annealing, the deuterium permeability of AM SS316L is comparable with that of the reference wrought SS316L. Deuterium retention in the as-built AM SS316L is 45% higher than that of the wrought 316L stainless steel and slightly higher than that of the two thermally annealed AM SS316L materials. Finally, transmission electron microscopy and positron annihilation lifetime spectroscopy were used to obtain microstructural information used to determine deuterium permeation and retention behavior in the studied materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Parametric Study of the Vacuum Permeator for the Tritium Extraction eXperiment

Tritium breeding is a critical component of any self-sustaining future fusion reactor. The liquid metal eutectic, PbLi, is of particular interest as a tritium breeder material due to its favorable thermophysical and neutronic properties. One of the several remaining challenges facing PbLi breeder blankets is the need to design and validate a highly efficient tritium extraction system. The vacuum permeator is a promising extraction concept that utilizes tritium permeation through a highly permeable metal membrane. The Tritium Extraction eXperiment (TEX) is a forced-convection PbLi loop constructed to investigate tritium extraction from PbLi with vacuum permeators. Accurate thermal-hydraulic and tritium transport models are required to establish appropriate test matrices, predict experiment outcomes, and analyze data. However, the hydrogen transport properties of PbLi and permeator materials have large uncertainties. A database is collected, and a parametric analysis is conducted on the effect of hydrogen transport material properties: diffusivity of H in PbLi and permeator, solubility of H in PbLi and permeator, and permeator surface recombination constant on the expected tritium extraction efficiency for a vacuum permeator installed in TEX. As a result, we observe solubility of H in PbLi and the permeator and the recombination constant of the permeator have the largest effect on the extraction efficiency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Biological upgrading of biogas assisted with membrane supplied hydrogen gas in a three-phase upflow reactor

Biogas upgrading via CO 2 conversion to CH 4 is an emerging technology for renewable natural gas production and carbon management, but its development is limited by the low H 2 gas to liquid phase transfer. Herein, an innovative biogas upgrading system employing a three-phase design was studied for CO 2 conversion with H 2 supply via gas-permeable membrane. The system produced biogas consisted of 74.1 ± 7.1 % CH 4 and 25.9 ± 7.1 % CO 2 with intermittent injection of H 2 . When H 2 supply was continuous, the CH 4 content increased to 91.6 ± 2.2 % at a H 2 :CO 2 ratio of 4.4. Although a higher ratio of 5.5 could result in a higher CH 4 percentage of 95.2 ± 2.5 %, biogas production rate started to decrease. The removal efficiency of organic contents remained above 90 % throughout the experiment. Microbial community analysis corroborated the findings, showing that hydrogenotrophic Methanobacteriaceae was more prevalent in the biofilm (71.9 %) compared to that in anaerobic digestion (15.8 %) and effluent (14.1 %).

Agriculture↗
NASA NTRS1986

Combustion engine system

A flow through catalytic reactor which selectively catalytically decomposes methanol into a soot free hydrogen rich product gas utilizing engine exhaust at temperatures of 200 to 650 C to provide the heat for vaporizing and decomposing the methanol is described. The reactor is combined with either a spark ignited or compression ignited internal combustion engine or a gas turbine to provide a combustion engine system. The system may be fueled entirely by the hydrogen rich gas produced in the methanol decomposition reactor or the system may be operated on mixed fuels for transient power gain and for cold start of the engine system. The reactor includes a decomposition zone formed by a plurality of elongated cylinders which contain a body of vapor permeable, methanol decomposition catalyst preferably a shift catalyst such as copper-zinc.

Houseman, John↗
DOE OSTI2024

Thin, Highly Selective Polymer Membrane Separators for Advanced Liquid Alkaline Water Electrolysis

Our team will develop novel, dense, polymer electrolyte separators based on polybenzimidazole (PBI) derivatives that will enable tuning of water/KOH uptake in mechanically robust films for advanced liquid alkaline water electrolysis (LAWE). These material advances will enable thinner separators with increased selectivity (hydroxide conductivity/hydrogen permeability), thereby enabling higher operating currents, increased dynamic operating high-temperature stability, and catalyst-coated membranes (zero-gap design advantages) in direct alignment with stated lab call goals.

HYDROGEN↗
DOE OSTI2022

Developing reactors for electrifying bio-methanation: a perspective from bio-electrochemistry

The integration of microbial synthesis with renewable electricity is an emerging route for both CO 2 utilization and seasonal energy storage in the form of stored bio-electrofuels. The major benefits of electrifying bioreactors include: using highly selective bio-catalysts for CO 2 conversion under mild reaction conditions; decoupling the production of more facile electrochemical intermediates, such as hydrogen, at the electrode from the production of bio-catalyzed multi-electron and/or carbon products, such as methane or acetate; using microbes as robust and self-regenerating catalysts enabling higher efficiency and durability in CO 2 conversion systems compared to inorganic catalysis. In this Perspective, we propose research aimed at developing electro-bioreactor components that will increase the productivity of the reactor while maintaining high energy efficiency and biocompatible reaction conditions to fully realize the benefits of electrified bioreactors. Furthermore, these developments include: flow reactors with tailored 3D electrodes to optimally use the reactor volume, electrocatalysts designed for peak performance in neutral pH electrolytes, high conductivity microbial media, and new membrane separator materials with high ion conductivity and low gas permeability. Production of methane via a hybrid electrical-biological approach is taken as a case study to motivate these developments. Finally, an iterative design–manufacture–test cycle, enabled by additive manufacturing and 3D printing technologies, is proposed to rapidly prototype components prior to large-scale manufacturing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Rational design of semi-interpenetrating network based on hyperbranched polyglycerol grafted MXene/polyurethane–epoxy for compressed hydrogen storage

Here, hydrogen (H 2 ) energy has emerged as a promising alternative in the automotive sector to replace fossil fuel; however, its storage with volumetric efficiency remains a challenge. The latest type IV storage vessel featuring a polymeric liner with composite overwrap incurs hydrogen saturation, which eventually causes failure. To prevent the H 2 dissolution in the liner, we have developed a barrier coating comprised of polyurethane/epoxy semi-interpenetrating network (S-IPN) combined with hyperbranched polyglycerol grafted MXene (h-MXene). The hyperbranched structure facilitated the dispersion of MXene in the coating solution by enhancing the exfoliation and improved the polymer filler interaction by forming covalent and H-bonding through end-terminal hydroxyl groups. Leveraging the dense network of S-IPN combined with the dispersed layer structured h-MXene significantly increased the tortuosity of the spray-coated barrier film applied to the nylon 6 liner. The coating exhibited a 90 % reduction in the H 2 gas permeability at only 2 wt% h-MXene concentration, which further improved to above 98 % at 10 wt% loading. Additionally, the h-MXene considerably improved the adhesion with the liner even in a highly stretched condition, signifying the durability of the coating under cyclic pressurization and depressurization of the storage vessel.

08 HYDROGEN↗
DOE OSTI2022

Performance Advantaged ..beta..-Ketone Containing Polymers - Benefits in Manufacturing, Performance, and End-of-Life

Biomass derived chemicals can possess extended functionality, often in the form of heteroatoms like oxygen and nitrogen, that can enable performance advantaged properties in emergent materials. These performance advantages can manifest in multiple ways such as reduced manufacturing intensity, better performance, or enhanced end-of-life options. One illustrative example of this concept is ..beta..-ketoadipic acid (..beta..KA), a C6 dicarboxylic acid with a ketone in its backbone. ..beta..KA can be obtained via biological cultivation from aromatic compounds, sugars, and even waste plastics. When ..beta..KA is implemented into polymers, namely nylons, in place of adipic acid the overall material properties are increased. Specifically, the glass transition temperature (which is the measurement at which temperature a plastic softens) is increased by 69 degrees C and the water permeability is reduced by 20%. Molecular dynamic (MD) simulations reveal that the ..beta..-ketone in ..beta..KA leads to restricted movement across multiple backbone carbons when compared to adipic acid. Furthermore, MD simulations reveal that the ..beta..-ketone, when compared to no-ketone or an a-ketone, can lead to an increase in hydrogen bonding between neighboring chains. Both phenomena may help explain the molecular origin of the increases in polymer performance. When implemented into polyesters, namely PET, ..beta..KA can maintain the requisite performance while enabling enhanced degradation. Aside from performance advantages in thermomechanical performance, the production of ..beta..KA also is advantaged in its manufacturing. Although estimates for the minimum selling price (MSP) of ..beta..KA exceed adipic acid the manufacture of ..beta..KAwould reduce supply chain energy and GHG emissions by >50% and >30% respectively. Further TEA analysis reveals that the MSP of ..beta..KA is primarily driven by the feedstock cost while the capital expenditures are driven largely by fermentation costs. Overall, the work presented within will be illustrative of how biomass derived molecules, namely ..beta..KA, can manifest performance advantages across multiple benchmarks and may enable a path to market for biomass-derived materials.

ADVANCED PROPULSION SYSTEMS,BIOMASS FUELS↗