Search NASA⌕ Search

SEARCH · Search NASA

Results for “input device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Multiparameter laser performance characterization of liquid crystals for polarization control devices in the nanosecond regime

Abstract Interactions of liquid crystals (LC’s) with polarized light have been studied widely and have spawned numerous device applications, including the fabrication of optical elements for high-power and large-aperture laser systems. Currently, little is known about both the effect of incident polarization state on laser-induced–damage threshold (LIDT) and laser-induced functional threshold (LIFT) behavior at sub-LIDT fluences under multipulse irradiation conditions. This work reports on the first study of the nanosecond-pulsed LIDT’s dependence on incident polarization for several optical devices employing oriented nematic and chiral-nematic LC’s oriented by surface alignment layers. Accelerated lifetime testing was also performed to characterize the ability of these devices to maintain their functional performance under multipulse irradiation as a function of the laser fluence at both 1053 nm and 351 nm. Results show that the LIDT varies as a function of input polarization by 30–80% within the same device, while the multipulse LIFT (which can differ from the nominal LIDT) depends on irradiation conditions such as laser fluence and wavelength.

47 OTHER INSTRUMENTATION↗

An anomaly detection framework for dynamic systems using a Bayesian hierarchical framework

Complex systems are susceptible to many types of anomalies, faults, and abnormal behavior caused by a variety of off-nominal conditions that may ultimately result in major failures or catastrophic events. Early and accurate detection of these anomalies using system inputs and outputs collected from sensors and smart devices has become a challenging problem and an active area of research in many application domains. In this article, we present a new Bayesian hierarchical framework that is able to model the relationship between system inputs (sensor measurements) and outputs (response variables) without imposing strong distributional/parametric assumptions while using only a subset of training samples and sensor attributes. Then, an optimal cost-sensitive anomaly detection framework is proposed to determine whether a sample is an anomalous one taking into consideration the trade-off between misclassification errors and detection rates. The model can be used for both supervised and unsupervised settings depending on the availability of data regarding the behavior of the system under anomaly conditions. The unsupervised model is particularly useful when it is prohibitive to identify in advance the anomalies that a system may present and where no data are available regarding the behavior of the system under anomaly conditions. A Bayesian hierarchical setting is used to structure the proposed framework and help with accommodating uncertainty, imposing interpretability, and controlling the sparsity and complexity of the proposed anomaly detection framework. A Markov chain Monte Carlo algorithm is also developed for model training using past data. Furthermore, the numerical experiments conducted using a simulated data set and a wind turbine data set demonstrate the successful application of the proposed work for system response modeling and anomaly detection.

17 WIND ENERGY↗

Timescale Separation of Positive and Negative Signaling Creates History-Dependent Responses to IgE Receptor Stimulation

The high-affinity receptor for IgE expressed on the surface of mast cells and basophils interacts with antigens, via bound IgE antibody, and triggers secretion of inflammatory mediators that contribute to allergic reactions. To understand how past inputs (memory) influence future inflammatory responses in mast cells, a microfluidic device was used to precisely control exposure of cells to alternating stimulatory and non-stimulatory inputs. We determined that the response to subsequent stimulation depends on the interval of signaling quiescence. For shorter intervals of signaling quiescence, the second response is blunted relative to the first response, whereas longer intervals of quiescence induce an enhanced second response. Through an iterative process of computational modeling and experimental tests, we found that these memory-like phenomena arise from a confluence of rapid, short-lived positive signals driven by the protein tyrosine kinase Syk; slow, long-lived negative signals driven by the lipid phosphatase Ship1; and slower degradation of Ship1 co-factors. This work advances our understanding of mast cell signaling and represents a generalizable approach for investigating the dynamics of signaling systems.

59 BASIC BIOLOGICAL SCIENCES↗

A study on the neutron monitoring system of LHD based on Monte Carlo simulations

Neutron monitoring is quite important because fusion neutrons are a direct evidence of fusion reactions. In calibration experiments of a neutron monitoring system, Monte Carlo calculations play an important role to correct various effects. To perform Monte Carlo calculations for a helical type fusion device, we make a program that can automatically generate an input file of a helical coil geometry for the MCNP code. The neutron spatial distributions and spectra for the helical devices are calculated in the geometries automatically generated by this program. We also discuss in calibration experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multichannel Doppler transmission grating spectrometer at the Alcator C-Mod tokamak

Upgrades to an existing transmission grating spectrometer for visible light used for Doppler velocity and temperature measurements at the Alcator C-Mod tokamak are given. These include a new Princeton Instruments Photonmax 512B charge-coupled device and a four channel fiber optic input. These together allow improvements to the signal level, time resolution, and the number of spatial channels. The fiber optic input allows four simultaneous spatial channels each of which offers a larger percentage of input light flux when compared to the standard fiber slit combination. The ''on chip'' amplification combined with versatile pixel binning further increases the signal to noise ratio allowing a continuous acquisition of spectra every 8 ms. The error bars for extracted velocity and temperature values are potentially smaller owing to the smaller pixel size and increased light flux which allow a more detailed line shape and simplifies line fitting. Examples of time and space resolved spectra are shown and further improvements are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Suppression of the asymmetric competition mode in the relativistic Ku-band coaxial transit-time oscillator

A relativistic Ku-band coaxial transit-time oscillator has been proposed in our previous work. In the experiments, we find that the asymmetric competition mode in the device limits the microwave power with the increase of the input electric power. For solving such a problem, the methods for analysis and suppression of the asymmetric competition mode in the device are investigated theoretically and experimentally. It is shown that the structure and the material of the collector, the concentricity, and the electron emission uniformity play an important part in the suppression of the asymmetric competition mode in the relativistic Ku-band transit-time oscillator. In the subsequent experiments, the asymmetric mode was suppressed effectively. At a low guiding magnetic field of 0.7 T, a microwave pulse with power of 1 GW, frequency of 14.3 GHz close to the simulation one, and efficiency of 20% was generated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impedance Based Fixture Neutralization (FINE) Method to Replicate Field Environments in Laboratory Settings

Test article vibration test responses will vary from one test laboratory to another due to differences in shaker and fixture dynamic characteristics. This is also seen between the field and laboratory due to the differing dynamic characteristics between field assembly loading and boundary conditions compared to the laboratory configuration. This work introduces a technique called Impedance Fixture Neutralization which customizes input forces to cause consistent responses for the Device Under Test across different vibration testing conditions. The customized force neutralizes the dynamic variations between configurations for the Device Under Test. The device responses can be replicated in several situations: when using a different fixture with the same attachment points, when the test article mounting location on the fixture changes, when the force location changes, or any combination of these situations. Impedance Fixture Neutralization uses the uncoupled dynamic characteristics of the test article and excitation fixtures to customize the input thereby causing the same test article responses between two mounting configurations (either field to laboratory or two different laboratory configurations). The application of the technique is shown using an analytical model of a two-beam system and analytically using experimental FRFs from plate and frame component hardware characterization tests. In both cases a device under test is attached to two test fixtures wherein the dynamic differences in the configurations are neutralized.

Laboratory↗

Extremely reduced dielectric confinement in two-dimensional hybrid perovskites with large polar organics

Two dimensional inorganic–organic hybrid perovskites (2D perovskites) suffer from not only quantum confinement, but also dielectric confinement, hindering their application perspective in devices involving the conversion of an optical input into current. In this report, we theoretically predict that an extremely low exciton binding energy can be achieved in 2D perovskites by using high dielectric-constant organic components. We demonstrate that in (HOCH 2 CH 2 NH 3 ) 2 PbI 4 , whose organic material has a high dielectric constant of 37, the dielectric confinement is largely reduced, and the exciton binding energy is 20-times smaller than that in conventional 2D perovskites. As a result, the photo-induced excitons can be thermally dissociated efficiently at room temperature, as clearly indicated from femtosecond transient absorption measurements. In addition, the mobility is largely improved due to the strong screening effect on charge impurities. Such low dielectric-confined 2D perovskites show excellent carrier extraction efficiency, and outstanding humidity resistance compared to conventional 2D perovskites.

42 ENGINEERING↗

Automated Auditing Tool for Retrofit Building Projects [SWR-11-07]

Building energy auditors regularly use notepads, physical forms, or simple spreadsheets to inventory energy consuming devices in buildings and audit overall performance. Mobile computing devices such as smart phones or tablet computers with camera inputs may be used to automatically capture relevant information and format audit input in a way that streamlines work flows and reduces the likelihood of error. As an example. an auditor could walk through a space holding a mobile device, which automatically identifies and appliances, windows, etc. This information would automatically be added to a mobile database associated with the building for later integration with a larger building audit database. The user experience would require little or no manual input, and could integrate with tools to automate used to automate data collection for building energy modeling.

Parker, Andrew↗

Dielectric Properties of Organic Solvents in an Electric Field

The effect of an external electric field ( E ) on the dielectric constant (ε) of several pure solvents [propylene carbonate (PC), ethylene carbonate (EC), acetonitrile (MeCN), and dimethyl carbonate (DMC)] and for several EC/DMC mixtures is explored using classical molecular dynamics simulation. Force fields were chosen that accurately predict the density and zero-field dielectric constant with respect to experiment. The simulation results for ε( E ) for field strengths up to 0.4 V/Å are calculated and fit to the Booth model, which is a standard functional form for the dependence of the dielectric constant on electric field. For PC and DMC, the Booth model gives an excellent representation of the data at all electric fields studied. For EC and MeCN, the Booth model works well at lower field strengths (up to 0.15 and 0.2 V/Å, respectively), but at the higher electric fields, these systems are observed to crystallize, a phenomenon referred to as electrofreezing . In conclusion, this work will provide useful input data for the continuum modeling of devices, such as electric double-layer capacitors, that utilize organic electrolyte solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A red-light-powered silicon nanowire biophotochemical diode for simultaneous CO 2 reduction and glycerol valorization

A bias-free photochemical diode, in which a p-type photocathode is connected to an n-type photoanode to harness light for driving photoelectrochemical reduction and oxidation pairs, serves as a platform for realizing light-driven fuel generation from CO 2 . However, the conventional design, in which cathodic CO 2 reduction is coupled with the anodic oxygen evolution reaction (OER), requires substantial energy input. Here we present a photochemical diode device that harnesses red light (740 nm) to simultaneously drive biophotocathodic CO 2 -to-multicarbon conversion and photoanodic glycerol oxidation as an alternative to the OER to overcome the above thermodynamic limitation. The device consists of an efficient CO 2 -fixing microorganism, Sporomusa ovata, interfaced with a silicon nanowire photocathode and a Pt–Au-loaded silicon nanowire photoanode. This photochemical diode operates bias-free under low-intensity (20 mW cm –2 ) red light irradiation with ~80% Faradaic efficiency for both the cathodic and anodic products. Finally, this work provides an alternative photosynthetic route to mitigate excessive CO 2 emissions and efficiently generate value-added chemicals from CO 2 and glycerol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conservation equations and calculation of mean flows in gyrokinetics

Conservation equations are derived for the gyrocenter toroidal momentum density and the polarization field. These equations are derived from the gyrokinetic model as it is implemented in simulation codes. In view of predicting the toroidal rotation in future fusion devices such as ITER, where external momentum input will be small, accurate simulations of momentum transport are crucial. The evolution equation for gyrocenter toroidal momentum density involves the divergence of the off-diagonal components of the Reynolds and generalized Maxwell stress, while the source term is the radial current of gyrocenters. The time evolution of the polarization field is the opposite of the gyrocenter current. Hence, an evolution equation for the total momentum density, i.e., the sum of gyrocenter and polarization field toroidal momentum density can be written. The force balance equation and the toroidal momentum conservation equations have been numerically tested with the gysela code. They are satisfied with a high level of accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnonic interferometric switch for multi-valued logic circuits

We investigated a possible use of the magnonic interferometric switches in multi-valued logic circuits. The switch is a three-terminal device consisting of two spin channels where input, control, and output signals are spin waves. Signal modulation is achieved via the interference between the source and gate spin waves. We report experimental data on a micrometer scale prototype based on the Y 3 Fe 2 (FeO 4 ) 3 structure. The output characteristics are measured at different angles of the bias magnetic field. The On/Off ratio of the prototype exceeds 13 dB at room temperature. Experimental data are complemented by the theoretical analysis and the results of micro magnetic simulations showing spin wave propagation in a micrometer size magnetic junction. Here, we also present the results of numerical modeling illustrating the operation of a nanometer-size switch consisting of just 20 spins in the source-drain channel. The utilization of spin wave interference as a switching mechanism makes it possible to build nanometer-scale logic gates, and minimize energy per operation, which is limited only by the noise margin. The utilization of phase in addition to amplitude for information encoding offers an innovative route towards multi-state logic circuits. We describe possible implementation of the three-value logic circuits based on the magnonic interferometric switches. The advantages and shortcomings inherent in interferometric switches are also discussed.

42 ENGINEERING↗

Pumped Thermal Electricity Storage with Supercritical CO2 Cycles and Solar Heat Input

Pumped Thermal Electricity Storage (PTES) is an energy storage device that uses grid electricity to drive a heat pump that generates hot and cold storage reservoirs. This thermal potential is later used to power a heat engine and return electricity to the grid. In this article, a PTES variant that uses supercritical carbon dioxide (sCO2) as the working fluid is introduced. sCO2-PTES cycles have higher work ratios and power densities than the systems based on ideal gases that have been investigated to date. Furthermore, sCO2- PTES cycles may achieve higher round-trip efficiencies for a given hot storage temperature (up to 78% at 560°C). The sensitivity of PTES cycles to loss factors such as isentropic efficiencies and temperature differences between the power cycle and storage fluid is investigated. A second concept whereby an sCO2- PTES cycle is integrated with concentrating solar power (CSP) is introduced. This concept ‘time-shifts’ the recompression of an sCO2 recompression cycle to a period of lower electricity prices and stores the heat. When solar heat is dispatched, the recompressor may be avoided as the required heat is obtained from storage, thereby leading to increased heat engine efficiencies. The net work output of this integrated system is 10-18% greater than the conventional recompression cycle. Combining PTES with a CSP power cycle is therefore shown to improve the dispatch of solar heat as well as providing electricity storage services.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Closing the loop between microstructure and charge transport in conjugated polymers by combining microscopy and simulation

A grand challenge in materials science is to identify the impact of molecular composition and structure across a range of length scales on macroscopic properties. We demonstrate a unified experimental–theoretical framework that coordinates experimental measurements of mesoscale structure with molecular-level physical modeling to bridge multiple scales of physical behavior. Here we apply this framework to understand charge transport in a semiconducting polymer. Spatially-resolved nanodiffraction in a transmission electron microscope is combined with a self-consistent framework of the polymer chain statistics to yield a detailed picture of the polymer microstructure ranging from the molecular to device relevant scale. Using these data as inputs for charge transport calculations, the combined multiscale approach highlights the underrepresented role of defects in existing transport models. Short-range transport is shown to be more chaotic than is often pictured, with the drift velocity accounting for a small portion of overall charge motion. Local transport is sensitive to the alignment and geometry of polymer chains. At longer length scales, large domains and gradual grain boundaries funnel charges preferentially to certain regions, creating inhomogeneous charge distributions. While alignment generally improves mobility, these funneling effects negatively impact mobility. The microstructure is modified in silico to explore possible design rules, showing chain stiffness and alignment to be beneficial while local homogeneity has no positive effect. This combined approach creates a flexible and extensible pipeline for analyzing multiscale functional properties and a general strategy for extending the accesible length scales of experimental and theoretical probes by harnessing their combined strengths.

42 ENGINEERING↗

Optimized pulsed write schemes improve linearity and write speed for low-power organic neuromorphic devices

Neuromorphic devices are becoming increasingly appealing as efficient emulators of neural networks used to model real world problems. However, no hardware to date has demonstrated the necessary high accuracy and energy efficiency gain over CMOS in both training via backpropagation and in read via vector matrix multiplication. Such shortcomings are due to device non-idealities, particularly asymmetric conductance tuning in response to uniform voltage pulse inputs. Here, by formulating a general circuit model for capacitive ion-exchange neuromorphic devices, we show that asymmetric nonlinearity in organic electrochemical neuromorphic devices (ENODes) can be suppressed by an appropriately chosen write scheme. Simulations based upon our model suggest that a nonlinear write-selector could reduce the switching voltage and energy, enabling analog tuning via a continuous set of resistance states (100 states) with extremely low switching energy (~170 fJ • µm –2 ). Furthermore, this work clarifies the pathway to neural algorithm accelerators capable of parallelism during both read and write operations.

97 MATHEMATICS AND COMPUTING↗

Quantum computer-enabled receivers for optical communication

Abstract Optical communication is the standard for high-bandwidth information transfer in today’s digital age. The increasing demand for bandwidth has led to the maturation of coherent transceivers that use phase- and amplitude-modulated optical signals to encode more bits of information per transmitted pulse. Such encoding schemes achieve higher information density, but also require more complicated receivers to discriminate the signaling states. In fact, achieving the ultimate limit of optical communication capacity, especially in the low light regime, requires coherent joint detection of multiple pulses. Despite their superiority, such joint detection receivers are not in widespread use because of the difficulty of constructing them in the optical domain. In this work we describe how optomechanical transduction of phase information from coherent optical pulses to superconducting qubit states followed by the execution of trained short-depth variational quantum circuits can perform joint detection of communication codewords with error probabilities that surpass all classical, individual pulse detection receivers. Importantly, we utilize a model of optomechanical transduction that captures non-idealities such as thermal noise and loss in order to understand the transduction performance necessary to achieve a quantum advantage with such a scheme. We also execute the trained variational circuits on an IBM-Q device with the modeled transduced states as input to demonstrate that a quantum advantage is possible even with current levels of quantum computing hardware noise.

97 MATHEMATICS AND COMPUTING↗

Nearly optimal state preparation for quantum simulations of lattice gauge theories

Here, we present several improvements to the recently developed ground-state preparation algorithm based on the quantum eigenvalue transformation for unitary matrices (QETU), apply this algorithm to a lattice formulation of U(1) gauge theory in (2+1) dimensions, as well as propose an alternative application of QETU, a highly efficient preparation of Gaussian distributions. The QETU technique was originally proposed as an algorithm for nearly optimal ground-state preparation and ground-state energy estimation on early fault-tolerant devices. It uses the time-evolution input model, which can potentially overcome the large overall prefactor in the asymptotic gate cost arising in similar algorithms based on the Hamiltonian input model. We present modifications to the original QETU algorithm that significantly reduce the cost for the cases of both exact and Trotterized implementation of the time evolution circuit. We use QETU to prepare the ground state of a U(1) lattice gauge theory in two spatial dimensions, explore the dependence of computational resources on the desired precision and system parameters, and discuss the applicability of our results to general lattice gauge theories. We also demonstrate how the QETU technique can be utilized for preparing Gaussian distributions and wave packets in a way which outperforms existing algorithms for as little as n q ≳ 2–5 qubits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗