Search NASA⌕ Search

SEARCH · Search NASA

Results for “ion adsorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Cation Selectivity in Capacitive Deionization: Elucidating the Role of Pore Size, Electrode Potential, and Ion Dehydration

Capacitive deionization (CDI) is a promising water desalination technology that is applicable to the treatment of low-salinity brackish waters and the selective removal of ionic contaminants. In this work, we show that by making a small change in the synthetic procedure of hierarchical carbon aerogel monolith (HCAM) electrodes, we can adjust the pore-size distribution and tailor the selectivity, effectively switching between selective adsorption of calcium or sodium ions. Ion selectivity was measured for a mixture of 5 mM NaCl and 2.5 mM CaCl 2 . For the low activated flow-through CDI (fteCDI) cell, we observed extremely high sodium selectivity over calcium (S Na/Ca $\gg$ 10, no Ca 2+ adsorbed) at all of the applied potentials, while for the highly activated fteCDI cell, we observed a selectivity value of 6.6 ± 0.8 at 0.6 V for calcium over sodium that decreased to 2.2 ± 0.03 at 1.2 V. Molecular dynamics simulations indicated that the loss in Ca 2+ selectivity over Na+ at high applied voltages could be due to a competition between ion-pore electrostatic interactions and volume exclusion (“crowding”) effects. Interestingly, we also find with these simulations that the relative sizes of the ions change due to changes in hydration at a higher voltage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Adsorption Equilibrium, Kinetics, and Column Breakthrough Data of Acetic Acid, Butyric Acid, and Lactic Acid on IRN-78 Ion-exchange Resin at Initial pH ~3 – 7 and Temperature 25 – 55 °C

This work presents systematic aqueous-phase adsorption equilibrium, kinetics, and column breakthrough measurements with three key biointermediates that are common compounds in many bioprocesses. Adsorption equilibrium experiments were carried out with acetic acid, butyric acid, and lactic acid on a commercial ion-exchange resin, Amberlite IRN-78, at wide ranges of acid concentration (8-500 mmol/L), initial pH (similar to 3-7), and temperature (25-55 degrees C), simulating the effluent characteristics from different fermenter operations. The kinetics and column breakthrough experiments were conducted at an initial pH of 6 and a concentration of 200 mmol/L. The equilibrium study shows a higher loading at the initial pH < pK(a) and a lower loading at the initial pH > pK(a). Overall removal varies between 16 and 99% depending on the initial pH, temperature, and organic acid concentration and type. The study further indicates monolayer adsorption at the equilibrium pH > 10 and multilayer adsorption at the equilibrium pH < 6. The thermodynamic modeling of adsorption isotherm data was carried out using Langmuir and Freundlich isotherms. IRN-78 presents fast adsorption kinetics as the maximum loading was attained in <= 10 min and nearly the same breakthrough time for all three organic acids involved in this study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Revealing Structural Evolution of Nickel Phosphide-Iron Oxide Core–Shell Nanocatalysts in Alkaline Medium for the Oxygen Evolution Reaction

Metal phosphide-containing materials have emerged as a potential candidate of non-precious metal-based catalysts for alkaline oxygen evolution reaction (OER). While it is known that metal phosphide undergoes structural evolution, considerable debate persists regarding the effects of dynamics on the surface activation and morphological stability of the catalysts. In this study, we synthesize NiP x -FeO x core-shell nanocatalysts with an amorphous NiP x core designed for enhanced OER activity. Using ex-situ X-ray absorption spectroscopy, we elucidate the local structural changes as a function of cyclic voltammetry cycles. Our studies suggest that the presence of corner-sharing octahedra in the FeO x shell improves structural rigidity through interlayer cross-linking, thereby inhibiting the diffusion of OH - /H 2 O. Thus, the FeO x shell preserves the amorphous NiP x core from rapid oxidation to Ni 3 (PO 4 ) 2 and Ni(OH) 2 . On the other hand, the incorporation of Ni from the core into the FeO x shell facilitates absorption of hydroxide ions for OER. As a result, the Ni/Fe(OH) x at the surface oxidizes to the active γ-(oxy)hydroxide phase under the applied potentials, promoting OER. This intriguing synergistic behavior holds significance as such synthetic route involving the FeO x shell can be extended to other systems, enabling manipulation of surface adsorption and diffusion of hydroxide ions. These findings also demonstrate that nanomaterials with core-shell morphology can be tuned to leverage the strength of each metallic component for improved electrochemical activities.

25 ENERGY STORAGE↗
DOE OSTI2024

Local Coordination Environment of Lanthanides Adsorbed onto Cr- and Zr-based Metal–Organic Frameworks

Separating individual lanthanide (Ln) elements in aqueous mixtures is challenging. Ion-selective capture by porous materials, such as metal–organic frameworks (MOFs), is a promising approach. To design ion-selective MOFs, molecular details of the Ln adsorption complexes within the MOFs must be understood. We determine the local coordination environment of lanthanides Nd(III), Gd(III), and Lu(III) adsorbed onto Cr(III)-based terephthalate MOF (Cr-MIL-101) and Zr(IV)-based Universitet in Oslo MOFs (UiO-66 and UiO-68) and their derivatives. In the Cr(III)- and Zr(IV)-based MOFs, Ln adsorb as inner-sphere complexes at the metal oxo clusters, regardless of whether the organic linkers are decorated with amino groups. Missing linkers result in favorable Ln binding sites at oxo clusters; however, Ln can coordinate to metal sites even with linkers in place. Further, MOF functionalization with phosphonate groups led to Ln chemisorption onto these groups, which out-compete metal cluster sites. Ln form monodentate and bidentate and mononuclear and binuclear surface complexes. We conclude that MOFs for ion-selective Ln capture can be designed by a combination of (1) maximizing metal-lanthanide interactions via shared O atoms at the metal oxo cluster sites, where mixed oxo clusters can lead to ion-selective Ln adsorption, and (2) functionalizing MOFs with Ln-selective groups capable of out-completing the metal oxo cluster sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Metal-organic-framework and walnut shell biochar composites for lead and hexavalent chromium removal from aqueous environments

Extensive research in recent years has explored the realm of porous carbon composites for various applications, including electrochemistry, structural materials, environmental remediation, and more. In particular, the fabrication of porous carbon composites using a metal-organic framework (MOF) and biochar (BC) for aqueous remediation is a fairly new avenue of research. In this study, a MOF-BC composite was synthesized with unmodified and chemically modified BCs using solvothermal synthesis. The composites were used as adsorbents to remediate heavy metals, such as lead (II) and chromium (VI), from aqueous environments. Here, it was verified that the MOF was homogeneously deposited onto the BC's surface using various material characterization techniques. Lead and chromium adsorption studies revealed a high adsorption capacity with greater than 99% removal for lead and ∼65% for chromium, respectively. Impressively, for lead, the highest observed experimental adsorption capacity of the MOF-chemically modified BC composite was 535 mg/g, compared to 240 mg/g for pristine BC. Meanwhile, the adsorption capacity of the same MOF-BC composite for chromium ions was low at 18 mg/g, compared to 80 mg/g for the chemically modified BC. The MOF-BC had a rapid adsorption rate, achieving equilibrium at only 150 min of reaction time for lead ions. MOF-BCs have higher adsorption for cationic lead through physisorption and ion-exchange mechanisms, whereas, for anionic chromium, removal is dominated only by physisorption mechanisms. The outcomes and methodological developments attained in this study offer a novel and compelling approach for synthesizing MOF-BC composites for aqueous remediation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Size-Dependent Energy of Ni Nanoparticles on Graphene Films on Ni(111) and Adhesion Energetics by Adsorption Calorimetry

The use of carbon supports for late transition-metal nanoparticle catalysts has grown substantially in recent years due to efforts to develop electrocatalysts for clean energy applications and catalysts for new aqueous-phase biomass-related conversions and due to the evolution of new carbon materials with unique properties (e.g., graphene, carbon nanotubes, and so forth). However, much less is known about the bonding energetics of catalytic metal nanoparticles on carbon supports in comparison with oxide supports, which are more common for thermal catalysis. Here, we report the growth morphology and heats of adsorption of Ni vapor deposited onto graphene/Ni(111) at 300 K and 100 K using metal vapor single-crystal adsorption calorimetry and He + low-energy ion scattering (LEIS). These results provide the Ni chemical potential versus particle size, and the Ni/graphene adhesion energy. LEIS intensities suggest that Ni grows as flat-topped face-centered cubic islands with a nearly constant thickness of ~1.5 nm when deposited at 300 K. At 100 K, Ni grows as smaller nanoparticles, well modeled as hemispherical hexagonal close-packed nanoparticles with a density of ~2 × 10 16 particles/m 2 . The Ni chemical potential as a function of average particle diameter in the 0.5 to 4 nm range at 100 K was determined from the heats of Ni gas adsorption. Further, by fitting the measured chemical potential as a function of diameter, we determined an adhesion energy of 3.6 J/m 2 for large Ni particles on graphene/Ni(111). This adhesion energy is in good agreement with previous scanning tunneling microscopy and density functional theory investigations of Ni/graphene/Ni(111).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanistic Insights on the Low-Temperature Oxidation of CO Catalyzed by Isolated Co Ions in N-Doped Carbon

Isolated cobalt ions on nitrogen-doped carbon (Co-N-C) catalyze CO oxidation at temperatures as low as 196 K, but the active site and mechanism for this reaction remain elusive. In this work, steady-state CO oxidation around 273 K over Co-N-C revealed nearly first order behavior in both CO and O 2 as well as a negative apparent activation energy. Isotopic transient analysis of the reaction confirmed a rapid turnover frequency and low surface coverage of adsorbed intermediates leading to CO 2 (< 10% of the Co). Results from kinetics experiments combined with quantum chemical calculations and molecular dynamics simulations are consistent with a reaction path involving weak adsorption of CO onto Co ions followed by a low barrier for the CO-assisted activation of weakly adsorbed O 2 . Furthermore, this proposed mechanism for dioxygen activation does not involve a redox cycle with the transition metal ion and may be important in other low temperature catalytic reactions involving O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ni Nanoparticles on CeO 2 (111): Energetics, Electron Transfer, and Structure by Ni Adsorption Calorimetry, Spectroscopies, and Density Functional Theory

The morphology, interfacial bonding energetics and charge transfer of Ni clusters and nanoparticles on slightly-reduced CeO 2-x (111) surfaces at 100 to 300 K have been studied using single crystal adsorption calorimetry (SCAC), low-energy ion scattering spectroscopy (LEIS), Xray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED) and density functional theory (DFT). The initial heat of adsorption of Ni vapor decreased with the extent of pre-reduction (x) of the CeO 2-x (111), showing that stoichiometric ceria adsorbs Ni more strongly than oxygen vacancies. On CeO 1.95 (111) at 300 K, the heat dropped quickly with coverage in the first 0.1 ML, attributed to nucleation of Ni clusters on stoichiometric steps, followed by the Ni particles spreading onto less favorable terrace sites. At 100 K, the clusters nucleate on terraces due to slower diffusion. Adsorbed Ni monomers are in the +2 oxidation state, and they bind by ~45 kJ/mol more strongly to step sites than terraces. The measured heat of adsorption versus average particle size on terraces is favorably compared to DFT calculations. The Ce 3d XPS lineshape showed an increase in Ce 3+ /Ce 4+ ratio with Ni coverage, providing the number of electrons donated to the ceria per Ni atom. The charge transferred per Ni is initially large but strongly decreases with increasing cluster size for both experiments and DFT, and shows large differences between clusters at steps versus terraces. This charge is localized on the interfacial Ni and Ce atoms in their atomic layers closest to the interface. This knowledge is crucial to understanding the nature of the active sites on the surface of Ni-CeO 2 catalysts for which metal-oxide interactions play a very important role in the activation of O-H and C-H bonds. In conclusion, the changes in these interactions with Ni particle size (metal loading) and the extent of reduction of the ceria help to explain how previously reported catalytic activity and selectivity change with these same structural details.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Unusual water-assisted NO adsorption over Pd/FER calcined at high temperatures: The effect of cation migration

Moisture contained in vehicle exhaust gas normally degrades the capacity and efficiency of Pd ion-exchanged zeolites as NO x adsorbents by competitive adsorption on active sites. Here, we report a counterexample to this general proposition, in which moisture facilitates the storage of NO as a nitrosyl complex on hydrated Pd ions in high temperature calcined FER-type zeolites. The divalent Pd 2+ cations upon elevated temperature (>800 °C) calcination occupy cationic position that render them fully coordinated by oxygen ions of the zeolite framework, and become inactive for the adsorption of probe molecules such as NO or CO. These ‘hidden’ Pd ions, however, are accessible by NO when the zeolite is hydrated, but readily release NO at around 200°C as dehydration proceeds. Herein, by combining systematic in situ infra-red data with X-ray diffraction Rietveld analyses, we revealed that the high temperature-induced relocation of Pd ions to more stable cationic positions located near 6-membered ring of the ferrierite cage is responsible for this anomalous behavior. This discovery constitutes a notable advance in understanding coordination chemistry of cations in zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

DRIFT: Diffusivity Regulation of Isotopes by nanoconFinementT

Spontaneous isotope fractionation has been reported under nanoconfinement conditions in naturally occurring systems, but the origin of this phenomena is currently unknown. Two existing hypotheses have been proposed, one based on changes in the solvation environment of the isotopes that reduces the non-mass dependent hydrodynamics contribution to diffusion. The other is that isotopes have mass-dependent surface adsorption, varying their total diffusion through nanoconfined channels. To investigate these hypotheses, benchtop experiments, nuclear magnetic resonance (NMR) spectroscopy, and molecule scale modeling were applied. Classical molecular dynamics simulations identified that the Na + and Cl - hydration shells across the three different salt solutions ( 22 Na 35 Cl, 23 Na 35 Cl, 24 Na 35 Cl) did not vary as a function of the Na + isotope, but that there was a significant pore size effect, with larger hydration shells at larger pore sizes. Additionally, while total adsorption times did not vary as a function of the Na + isotope or pore size, the free ion concentration, or those adsorbed on the surface for <5% of the simulation time did exhibit isotope dependence. Experimentally, challenges occurred developing a repeatable experiment, but NMR characterization of water diffusion rates through ordered alumina membranes was able to identify the existence of two distinct water environments associated with water inside and outside the pore. Further NMR studies could be used to confirm variation in hydration shells and diffusion rates of dissolved ions in water. Ultimately, mass-dependence adsorption is a primary driver of variations in isotope diffusion rates, rather than variation in hydration shells that occur under nanoconfinement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

A practical guide to quartz crystal microbalance with dissipation monitoring of thin polymer films

Quartz crystal microbalance with dissipation (QCM-D) monitoring is a powerful tool used to sensitively examine the real-time responses of polymer films to external responses. For example, the technique is commonly used to monitor film growth, material adsorption, thin film swelling, and ion exchange. With its rapidly expanding use, this review is intended to introduce new users to the basic principles of QCM-D, along with practical challenges and remedies specific to polymer thin films. For both new and experienced users, specific case studies are highlighted including layer-by-layer assembly, electrochemical QCM-D, swelling, sensing, and biological application. Finally, the review recommends future directions for research and areas of growth.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Active Palladium Structures on Ceria Obtained by Tuning Pd–Pd Distance for Efficient Methane Combustion

Efficiently removing/converting methane via methane combustion imposes challenges on catalyst design: how to design local structures of a catalytic site so that it has both high intrinsic activity and atomic efficiency? By manipulating the atomic distance of isolated Pd atoms, herein we show that the intrinsic activity of Pd catalysts can be significantly improved for methane combustion via a stable Pd 2 structure on a ceria nanorod support. Guided by theory and confirmed by experiment, we find that the turnover frequency (TOF) of the Pd 2 structure with the Pd–Pd distance of 2.99 Å is higher than that of the Pd 2 structure with the Pd–Pd distance of 2.75 Å; at least 26 times that of ceria supported Pd single atoms and 4 times that of ceria supported PdO nanoparticles. The high intrinsic activity of the 2.99 Å Pd–Pd structure is attributed to the conductive local redox environment from the two O atoms bridging the two Pd 2+ ions, which facilitates both methane adsorption and activation as well as the production of water and carbon dioxide during the methane oxidation process. In conclusion, this work highlights the sensitivity of catalytic behavior on the local structure of active sites and the fine-tuning of the metal–metal distance enabled by a support local environment for guiding the design of efficient catalysts for reactions that highly rely on Pt-group metals.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Probing Heterogeneous Charge Distributions at the α-Al 2 O 3 (0001)/H 2 O Interface

Unlike metal or semiconductor electrodes, the surface charge resulting from the protonation or deprotonation of insulating mineral oxides is highly localized and heterogeneous in nature. In this work the Stark active C≡N stretch of potassium thiocyanate is used as a molecular probe of the heterogeneity of the interfacial electrostatic potential at the α-Al 2 O 3 (0001)/H 2 O interface. Vibrational sum frequency generation (vSFG) measurements performed in the OH stretching region suggest that thiocyanate species organize interfacial water similarly to halide ions. Changes in the electrostatic potential are then tracked via Stark shifts of the vibrational frequency of the thiocyanate stretch. Our vSFG measurements show that we can simultaneously measure the vSFG response of SCN – ions experiencing charged and neutral surface sites. We assign local potentials of +308 and -154 mV to positively and negatively charged aluminol groups that are present at pH = 4 and pH = 10, respectively. Thiocyanate anions at positively charged surface sites and negatively charged surface sites and those participating in contact ion pairing adopt similar orientations and are oppositely oriented relative to thiocyanate ions near neutral surface sites. All four species followed Langmuir adsorption isotherms. Density functional theory–molecular dynamics (DFT-MD) simulations of SCN – near the neutral α-Al 2 O 3 (0001)/H 2 O interface show that the vSFG response in the C≡N stretch region originates from a SCN–H–O–Al complex, suggesting the surface site specificity of these experiments. To our knowledge this is the first spectroscopic measurement of local potentials associated with a heterogeneously charged surface. The ability to probe the evolution of local charges in situ could provide vital insight into many industrial, electrochemical, and geochemically relevant interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Boosting the Oxygen Evolution Reaction by Tuning the Interfacial Iron Adsorption on Layered Double Hydroxide

Understanding the interaction between ions in the electrolyte and electrode materials plays an important role in optimizing the water electrolysis performance for hydrogen production. Herein, the synergistic effect of iron (Fe) in the electrolyte and interlayer anions within the layered structure on the oxygen evolution reaction (OER) has been investigated by combining material synthesis with controlled structure, multiple characterization techniques, and first-principles calculations. Nickel aluminum layered double hydroxides (NiAl-LDHs) with different interlayer anions (CO 3 2– , Cl – , and Br – ) show similar oxygen evolution activity in the absence of Fe species in the electrolyte. The addition of Fe into the electrolyte results in improved performance for all of the NiAl-LDHs, following the rank LDH-Br > LDH-Cl > LDH-CO 3 , under all of the conditions with varied concentration of Fe. X-ray absorption spectroscopy and identical location electron microscopy analyses show that the LDH structure remains unchanged after the OER activity test, while in situ stationary probe rotating disk electrode inductively coupled plasma mass spectrometry (SPRDE-ICP-MS) measurements show partial dissolution of the intercalating halide ions during cycling, with less dissolution for Br-intercalated materials. Insights from theoretical calculations demonstrate the thermodynamic preference of Br – to remain intercalated in the presence of Fe, while the stronger adsorption of Fe(OH) 3 species on the LDH-Br sample promotes the OER activity. In conclusion, these results provide mechanistic insights into the rational design of active layered materials with an enhanced OER performance for efficient water electrolysis.

58 GEOSCIENCES↗
DOE OSTI2026

Solar-powered self-descaling seesaw extractor for lithium production from seawater

The low Li + concentration and the abundance of competing ions limit the efficiency of lithium extraction from seawater. Here, in this work, we report a solar-powered seesaw extractor (SPSE) to boost Li + adsorption while minimizing scaling caused by competing ions during photothermal evaporation. The SPSE features a sandwich architecture, with a hydrophilic adsorbent layer placed between two hydrophobic photothermal layers. The seesaw configuration enables Li + to be elevated and concentrated through evaporation to overcome sluggish adsorption kinetics, while the associated salt scaling is removed by the seesawing motion. As a demonstration, we assembled 60 SPSEs into a 3 × 20 array that achieved a 15.5-fold increase in local Li + concentration and a 69.1% improvement in Li + uptake over 120 h, with a Li + /Na + separation factor exceeding 370,000.

localized enrichment↗
DOE OSTI2021

Uptake of aqueous heavy metal ions (Co2+, Cu2+ and Zn2+) by calcium-aluminium-silicate-hydrate gels

Highlights: • C-A-S-H gels containing metal ions (Co{sup 2+}, Cu{sup 2+} or Zn{sup 2+}) were precipitated by a sol-gel technique. • Uptake mechanism and immobilization capacity of divalent metal ions by C-A-S-H are elucidated. • Up to ~55–60 mol% of Zn can be incorporated in defective tobermorite-type C-A-S-H. • Metal uptake by C-A-S-H is controlled mainly by isomorphous substitution for Ca ions. • Crystal-chemical features of C-A-S-H gels and implications for practical application are discussed. Calcium-aluminium-silicate-hydrate (C-A-S-H) gels containing heavy metal ions (Me: Co{sup 2+}, Cu{sup 2+} or Zn{sup 2+}) were precipitated at different Me/Si molar ratios to study the uptake mechanism and immobilization capacity. Aqueous solution chemistry and solid-phase characterization using XRD, FTIR, ESEM-EDX, TEM-HAADF and TG-DSC methods reveal threshold values for ion substitution of ~55–60 mol% for Zn, ~30–40 mol% for Co and ~25–30 mol% for Cu in defective tobermorite-type C-A-S-H with (Ca + Me)/(Si + Al) molar ratios from 0.86 to 1.04. At higher aqueous Me concentrations, Me (chloride) hydroxides start to co-precipitate. The uptake mechanism of Me ions by C-A-S-H is based on (i) isomorphous substitution of Me for Ca in the CaO layer, (ii) ion exchange in the interlayer, (iii) tetrahedral substitution (Zn) within the dreierketten chains and (iv) surface adsorption onto the C-A-S-H gel structure. Systematics in crystal-chemistry of Me-bearing C-A-S-H and implications for application and performance in natural and man-made settings are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A comparative study of silver- and palladium-exchanged zeolites in propylene and nitrogen oxide adsorption and desorption for cold-start applications

Here, silver and palladium ion-exchanged BEA zeolites (Si/Al = 12.5) and silver ion-exchanged ZSM-5 zeolites (Si/Al = 15) were studied for their ability to adsorb and desorb propylene and NO under simulated diesel exhaust conditions. The adsorption experiment results demonstrated the excellent ability of bare BEA zeolites to adsorb propylene, but only a small amount of NO. The presence of H 2 O inhibited the adsorption of both C 3 H 6 and NO. Ion-exchanging BEA zeolites with Ag (1.2 and 5.1 wt.% Ag/BEA) attenuated the inhibiting effect of H 2 O on C 3 H 6 adsorption, while NO storage remained inhibited. Adsorption experiments indicated that C 3 H 6 and NO competed with each other for Pd sites with C 3 H 6 showing stronger adsorption compared to NO, whereas Ag sites preferentially adsorbed C 3 H 6 . DRIFTS data indicated the formation of nitrate, formate and acetate species on Ag and Pd, while C 3 H 6 and NO adsorption was also observed on the zeolite hydroxyl groups in the absence of H 2 O. However, the C 3 H 6 and NO adsorption on the zeolite hydroxyl groups was significantly inhibited in the presence of H 2 O. Additionally, nitrosyl, acrolein and carbonate species were formed over 1.0 wt.% Pd/BEA. The effluent analysis during the temperature-programmed desorption in the DRIFTS reactor revealed that adsorbed C 3 H 6 and NO reacted during the release to form oxidation reaction byproducts. The 1.0 wt.% Pd/BEA zeolite showed the greatest oxidation ability during desorption with the majority of stored C 3 H 6 converted to CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High‐efficiency adsorption of various heavy metals by tea residue biochar loaded with nanoscale zero‐valent iron

Abstract Nanoscale zero‐valent iron (nZVI) loaded on tea residue biochar activated with phosphoric acid composites was synthesized. This adsorbent can efficiently adsorb multiple heavy metal ions such as Pb (II), Cr (III), Cu (II), and Ni (II) simultaneously. The adsorption process was found to follow the pseudo‐second‐order kinetic model. Equilibrium adsorption capacities reached 288.18, 162.34, 242.72, and 267.22 mg·g −1 for Pb(II), Cr(III), Cu(II), and Ni(II), respectively. The common interfering ions exhibited lower influence on its adsorption capacity. The adsorption mechanism includes reduction, ion exchange, surface complexation and precipitation. Furthermore, the waste adsorbent was converted into a catalyst in situ, which could catalyze the degradation of Congo red by establishing an electron transfer pathway. This research provides a new concept for the sustainable utilization of industrial tea residues and the harmless treatment of waste nZVI composite adsorbents.

Liu, Shuang↗