Search NASA⌕ Search

SEARCH · Search NASA

Results for “ion ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Modeling nanoparticle charge distribution in the afterglow of non-thermal plasmas and comparison with measurements

Particle charging in the afterglows of non-thermal plasmas typically take place in a non-neutral space charge environment. We model the same by incorporating particle-ion collision rate constant models, developed in prior work by analyzing particle-ion trajectories calculated using Langevin Dynamics simulations, into species transport equations for ions, electrons and charged particles in the afterglow. A scaling analysis of particle charging and additional Langevin Dynamics calculations of the particle-ion collision rate constant are presented to extend the range of applicability to ion electrostatic to thermal energy ratios of 300 and diffusive Knudsen number (that scales inversely with gas pressure) up to 2000. The developed collision rate constant models are first validated by comparing predictions of particle charge against measured values in a stationary, non-thermal DC plasma from past PK-4 campaigns published in Phys. Rev. Lett. 93(8): 085001 and Phys. Rev. E 72(1): 016406). The comparisons reveal excellent agreement within ±35% for particles of radius 0.6,1.0,1.3 μm in the gas pressure range of ~20-150 Pa. The experiments to probe particle charge distributions by Sharma et al. (J. Physics D: Appl. Phys. 53(24): 245204) are modeled using the validated particle-ion collision rate constant models and the calculated charge fractions are compared with measurements. The comparisons reveal that the ion/electron concentration and gas temperature in the afterglow critically influence the particle charge and the predictions are generally in qualitative agreement with the measurements. Along with critical assessment of the modeling assumptions, several recommendations are presented for future experimental design to probe charging in afterglows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of beam ion driven Alfvén eigenmode stability induced by Tungsten contamination in EAST

Alfvén eigenmodes (AE) activity is observed in the EAST high β N and low B T discharge 93910, operation scenario dedicated to explore the ITER baseline scenario. AEs are triggered after the plasma is contaminated by Tungsten that causes an abrupt variation of the thermal plasma and energetic particles (EPs) profiles. The aim of the present study is to analyze the AE stability in the 93910 discharge using the gyro-fluid code FAR3d, identifying the AE stability trends by comparing the plasma before and after the Tungsten contamination. Tungsten contamination causes the destabilization of Toroidal AEs (TAE) and Energetic particle modes (EPMs) in the same frequency range and radial location with respect to the experimental observation and M3D-K/GTAW code results. Next, a set of parametric studies are performed to analyze the effect of the thermal plasma and EP parameters on the AE stability. The analysis indicates a lower EP β threshold for the AEs destabilization if the EP energy increases, an improved AE stability of on-axis NBI configurations due to the stronger continuum damping in the inner plasma region as well as a large enhancement of the EP drive as the thermal ion density increases due to a higher ratio of the EP and Alfven velocities. Consequently, the simulations indicate the increment of the thermal ion density after the Tungsten contamination could be the main cause of the AE/EPM destabilization.

AE↗

Minimizing Selection Bias in Inclusive Jets in Heavy-Ion Collisions with Energy Correlators

The first-ever measurement of energy correlators within inclusive jets produced in heavy-ion collisions, revealed by the CMS Collaboration, shows a clear enhancement at large angles relative to the proton-proton (p-p) baseline. However, interpreting this enhancement is complicated due to selection bias from energy loss, which also distorts the energy correlator heavy-ion to p-p ratio in the hadronization region, hindering our understanding of parton/hadron dynamics in a colored medium. In this Letter, we introduce a new ratio of energy correlator observables that removes the leading effects of selection bias from the two-point energy correlator spectrum (E2C). PYTHIA and HERWIG simulations show that the impact of selection bias in the E2C is reduced by an order of magnitude, while sensitivity to any other medium modifications is retained. This quantity can be obtained directly from the experimental measurements presented by CMS, as illustrated in an accompanying note [C. Andres and J. Holguin, arXiv:2409.07526].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of Histidine‐Containing Peptoids in Accelerating the Kinetics of Calcite Growth

Carbonate mineralization, the conversion of CO 2 into stable, thermodynamically favorable carbonate minerals, offers a promising strategy for permanent and environmentally friendly carbon storage, with minimal risk of long-term leakage and minimal monitoring requirements. Drawing inspiration from carbonic anhydrase (CA), a family of zinc-containing metalloenzymes that catalyze the hydration of CO 2 to bicarbonate and promote carbonate precipitation, a class of histidine-containing peptoids was designed that is capable of coordinating with Zn 2+ ions to act as CA mimetics for accelerating calcite step growth. In situ atomic force microscopy (AFM) measurements reveal that these peptoids significantly enhance step advancement, with a more pronounced effect observed when combined with Zn 2+ ions and under higher calcium-to-carbonate activity ratios, indicating that peptoids facilitate the incorporation of CO 3 2− ions at step edges. Solution NMR and 3D atomic force microscopy (3D AFM) analyses show that the coordination of peptoids with Zn 2+ promotes both the deprotonation of HCO 3 − to CO 3 2− and restructures the interfacial hydration layers of calcite, collectively lowering the activation barrier for step growth. These findings establish a design framework for sequence-defined polymers to regulate carbonate mineralization, offering promising applications in CO 2 capture and long-term storage.

CO2 mineralization↗

Iodide Double Perovskites and the Limits of their Structural Stability

AbstractWhile halide double perovskites A2M(I)M(III)X6 have attracted significant attention, examples involving iodides are rare. We examine the limits of the structural stability of iodide double perovskites, presenting the synthesis and single‐crystal structures of Cs2NaScI6 and Cs2NaYI6. Bypassing the common expectation that iodides have small band gaps, these compounds display optical gaps of 3.10 eV [M(III) = Sc] and 3.65 eV [M(III) = Y]. Cs2NaScI6 is the only iodide double perovskite to exhibit a cubic crystal structure at room temperature. Density functional theory‐based electronic structure calculations help understand the role of competing Cs3M(III)2I9 (3 : 2 : 9) phases and provide possible reasons for why iodide double perovskites based around In(III), Sb(III) and Bi(III) cations have proved elusive. We confirm design rules for halide double perovskites based around concepts of the tolerance factor and the radius ratio of the smaller, trivalent ion, but also point to situations such as what is observed for Cs2NaScI6 where a double perovskite can be trapped in a metastable structure.

Mulligan, Anya S.↗

Colliding localized, lumpy holographic shocks with a granular nuclear structure

We apply a recent and simple technique which speeds up the calculation of localized collisions in holography to study more realistic models of the pre-hydrodynamic phase of heavy ion collisions using gauge/gravity duality. Our initial data reflects the lumpy nuclear structure of real heavy ions and our projectiles’ aspect ratio mimics the Lorentz contraction of nuclei during RHIC collisions. At the hydrodynamization time of the central region of the quark gluon plasma developed during the collision, we find that most of the system’s vorticity is located well outside the hydrodynamized part of the plasma. Only the relativistic corrections to the thermal vorticity within the hydrodynamized region are non-negligible. We compare the transverse flow shortly after the collision with previous results which did not use granular initial conditions and determine the proper energy density and fluid velocity in the hydrodynamized subregion of the plasma.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Collision-energy dependence of deuteron cumulants and proton-deuteron correlations in Au+Au collisions at RHIC

We report the first measurements of cumulants, up to 4th order, of deuteron number distributions and proton-deuteron correlations in Au+Au collisions recorded by the STAR experiment in phase-I of Beam Energy Scan (BES) program at the Relativistic Heavy Ion Collider. Deuteron cumulants, their ratios, and proton-deuteron mixed cumulants are presented for different collision centralities covering a range of center-of-mass energy per nucleon pair $\sqrt{s_{NN}} = 7.7$ to 200 GeV. It is found that the cumulant ratios at lower collision energies favor a canonical ensemble over a grand canonical ensemble in thermal models. An anti-correlation between proton and deuteron multiplicity is observed across all collision energies and centralities, consistent with the expectation from global baryon number conservation. The UrQMD model coupled with a phase-space coalescence mechanism qualitatively reproduces the collision-energy dependence of cumulant ratios and proton-deuteron correlations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Understanding the reversible electrodeposition of aluminum in low-cost room-temperature molten salts

Aluminum is the most earth-abundant metal, trivalent, and inert in ambient air; it also has a density approximately five times that of lithium at room temperature, making it attractive for cost-effective, long-duration storage in batteries. Here, we investigate structural requirements and physicochemical and transport properties of ionic liquid (IL) electrolytes thought to enable high reversibility of Al battery anodes. We find that intentionally designed, low-cost IL analogs, including ammonium-based molten salts, offer comparable Al anode reversibility to state-of-the-art imidazolium-based IL melts. A critical ratio of solvated Al-ion species is required to balance the effects of Lewis acidity needed to continuously etch native Al 2 O 3 and form a stable solid electrolyte interphase on Al. Our findings open new opportunities for developing simple, cost-effective, room-temperature Al batteries that enable long-duration electrical energy storage.

25 ENERGY STORAGE↗

Designing lithium halide solid electrolytes

All-solid-state lithium batteries have attracted widespread attention for next-generation energy storage, potentially providing enhanced safety and cycling stability. The performance of such batteries relies on solid electrolyte materials; hence many structures/phases are being investigated with increasing compositional complexity. Among the various solid electrolytes, lithium halides show promising ionic conductivity and cathode compatibility, however, there are no effective guidelines when moving toward complex compositions that go beyond ab -initio modeling. Here, we show that ionic potential, the ratio of charge number and ion radius, can effectively capture the key interactions within halide materials, making it possible to guide the design of the representative crystal structures. This is demonstrated by the preparation of a family of complex layered halides that combine an enhanced conductivity with a favorable isometric morphology, induced by the high configurational entropy. This work provides insights into the characteristics of complex halide phases and presents a methodology for designing solid materials.

25 ENERGY STORAGE↗

Towards large-scale quantum optimization solvers with few qubits

Quantum computers hold the promise of more efficient combinatorial optimization solvers, which could be game-changing for a broad range of applications. However, a bottleneck for materializing such advantages is that, in order to challenge classical algorithms in practice, mainstream approaches require a number of qubits prohibitively large for near-term hardware. Here we introduce a variational solver for MaxCut problems over $m={{\mathcal{O}}}({n}^{k})$ binary variables using only n qubits, with tunable k > 1. The number of parameters and circuit depth display mild linear and sublinear scalings in m , respectively. Moreover, we analytically prove that the specific qubit-efficient encoding brings in a super-polynomial mitigation of barren plateaus as a built-in feature. Altogether, this leads to high quantum-solver performances. For instance, for m = 7000, numerical simulations produce solutions competitive in quality with state-of-the-art classical solvers. In turn, for m = 2000, experiments with n = 17 trapped-ion qubits feature MaxCut approximation ratios estimated to be beyond the hardness threshold 0.941. Our findings offer an interesting heuristics for quantum-inspired solvers as well as a promising route towards solving commercially-relevant problems on near-term quantum devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling gas–shell mixing in ICF with separated reactants

Mixing between fuel and shell materials in ICF implosions can affect implosion dynamics and even prevent ignition. We use data from a series of separated reactant experiments on the National Ignition Facility to calibrate and test the predictive power of gas–shell mix models. Two models are used to estimate fuel–shell mix: a Reynolds-averaged turbulence model and molecular diffusion. Minor uncertainties in capsule manufacture, experimental conditions, and values for mix model parameters produce significant variation in simulation results. Using input/output pairs from 1D simulations, we train Gaussian process surrogate models to predict experimental quantities of interest. The surrogates are used to construct posteriors for mix model parameters by marginalizing over uncertainties in capsule manufacture and experimental conditions. Mix models are calibrated with a subset of experimental data (neutron yields, ion temperature, and bang time) and tested using the remaining data. In general, both the diffusion and turbulence model correctly predict experimental DT and TT neutron yields. Despite having more free parameters, the turbulence model underpredicts ion temperature at high convergence ratio. Furthermore, the simpler diffusion model correctly predicts these temperatures, suggesting nonhydrodynamic gas–shell mix. The computational model consistently overpredicts DD neutron yield, indicating possible shortcomings outside of the mix model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

How Hall electric fields intrinsically chaotize and heat ions during collisionless magnetic reconnection

The origin of extreme and anomalous ion heating during magnetic reconnection has been a longstanding mystery. It is shown in this paper that, at the core of the process, the stochastic heating mechanism is responsible for this energization. The in-plane Hall electric fields that intrinsically develop during collisionless reconnection not only accelerate ions, but also thermalize them by inducing chaotic motion. The mechanism explains various observed features of ion heating, e.g., its relation to the guide field strength and the ion mass-to-charge ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Polarized fusion and potential in situ tests of fuel polarization survival in a tokamak plasma

Abstract The use of spin-polarized fusion fuels would provide a significant boost towards the ignition of a burning plasma. The cross section for D + T → α + n, would be increased by 1.5 if the fuels were injected with parallel polarization. Furthermore, our simulations demonstrate additional non-linear power gains in large-scale machines such as ITER, due to increased alpha heating. Such benefits require the survival of spin polarizations for periods comparable to the particle confinement time. During the 1980s, calculations predicted that polarizations could survive a plasma environment, although concerns persisted regarding the cumulative impacts of wall recycling. In that era, technical challenges prevented direct tests and left the large scale fueling of a power reactor beyond reach. Over the last decades, this situation has changed dramatically. Detailed simulations of ITER have predicted negligible wall recycling in a high-power reactor, and recent advances in laser-driven sources project the capability of producing large quantities of ∼100% polarized D and T. The remaining crucial step is an in-situ demonstration of polarization survival in a plasma. For this, we outline a measurement strategy using the isospin-mirror reaction, D + 3 He → α + p. Polarized 3 He avoids the complexities of handling tritium, while encompassing the same spin-physics. We evaluate two methods of delivering deuterium, using dynamically polarized Lithium-Deuteride (with vector polarization P V D of 70%) or frozen-spin Hydrogen-Deuteride (with P V D of 40%), together with a method of injecting optically-pumped 3 He (with 65% polarization). Pellets of these materials all have long polarization decay times (∼6 min for LiD at 2 K, ∼2 months for HD at 2 K, and ∼3 d for 3 He at 77 K), all far greater than a plasma shot in a research tokamak such as DIII-D (∼20 s). Both species can be propelled from a single cryogenic injection gun. We review plasma requirements and strategies for detecting polarization survival. Polarization alters both fusion yields and the angular distribution of fusion products, and each of these provides a potential signal. In this paper we simulate a selection of shots with similar characteristics in a future high-T ion H plasma, and find ratios of yields from shots with fuel spins parallel and antiparallel reaching 1.3 (HD + 3 He) to 1.6 (LiD + 3 He) over a wide range of poloidal angles. (A companion paper finds sensitivity to fusion product angular distributions as reflected in the pitch angles of protons and alphas reaching the plasma facing wall.)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cosmic Ray Mediated Thermal Fronts in the Warm-Hot Circumgalactic Medium

We investigate the 1D plane-parallel front connecting the warm ($10^4$ K) and hot ($10^6$ K) phases of the circumgalactic medium (CGM), focusing on the influence of cosmic rays (CRs) in shaping these transition layers. We find that cosmic rays dictate the thermal balance while other fluxes (thermal conduction, radiative cooling, and gas flow) adjust to compensate. We compute column density ratios for selected transition temperature ions and compare them with observational data. While most of our models fail to reproduce the observations, a few are successful, although we make no claims for their uniqueness. Some of the discrepancies may indicate challenges in capturing the profiles in cooler, photoionized regions, as has been suggested for by previous efforts to model thermal transition layers.

79 ASTRONOMY AND ASTROPHYSICS↗

Double-power-law Feature of Energetic Particles Accelerated at Coronal Shocks

Recent observations have shown that in many large solar energetic particle (SEP) events the event-integrated differential spectra resemble double power laws. We perform numerical modeling of particle acceleration at coronal shocks propagating through a streamer-like magnetic field by solving the Parker transport equation, including protons and heavier ions. We find that for all ion species the energy spectra integrated over the simulation domain can be described by a double power law, and the break energy depends on the ion charge-to-mass ratio as E B ~ (Q/A) α , with α varying from 0.16 to 1.2 by considering different turbulence spectral indices. We suggest that the double-power-law distribution may emerge as a result of the superposition of energetic particles from different source regions where the acceleration rates differ significantly due to particle diffusion. The diffusion and mixing of energetic particles could also provide an explanation for the increase of Fe/O at high energies as observed in some SEP events. Although further mixing processes may occur, our simulations indicate that either a power-law break or rollover can occur near the Sun and predict that the spectral forms vary significantly along the shock front, which may be examined by upcoming near-Sun SEP measurements from the Parker Solar Probe and Solar Orbiter.

79 ASTRONOMY AND ASTROPHYSICS↗

First-principles based plasma profile predictions for optimized stellarators

In the present Letter, first-of-its-kind computer simulations predicting plasma profiles for modern optimized stellarators—while self-consistently retaining neoclassical transport, turbulent transport with 3D effects, and external physical sources—are presented. These simulations exploit a newly developed coupling framework involving the global gyrokinetic turbulence code GENE-3D, the neoclassical transport code KNOSOS, and the 1D transport solver TANGO. This framework is used to analyze the recently observed degradation of energy confinement in electron-heated plasmas in the Wendelstein 7-X stellarator, where the central ion temperature was 'clamped' to $T_\textrm i \approx 1.5$ keV regardless of the external heating power. By performing first-principles based simulations, we provide key evidence to understand this effect, namely the inefficient thermal coupling between electrons and ions in a turbulence-dominated regime, which is exacerbated by the large $T_\textrm e/T_\textrm i$ ratios, and show that a more efficient ion heat source, such as direct ion heating, will increase the on-axis ion temperature. This work paves the way towards the use of high-fidelity models for the development of the next generation of stellarators, in which neoclassical and turbulent transport are optimized simultaneously.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Beam Energy Dependence of Triton Production and Yield Ratio $N_t \times N_p / N^2_d$ in Au+Au Collisions at RHIC

We report the triton (t) production in midrapidity (|y| < 0.5) Au + Au collisions at $\sqrt{s_{NN}} = 7.7-200$ GeV measured by the STAR experiment from the first phase of the beam energy scan at the Relativistic Heavy Ion Collider. The nuclear compound yield ratio ($N_t \times N_p / N^2_d$), which is predicted to be sensitive to the fluctuation of local neutron density, is observed to decrease monotonically with increasing charged-particle multiplicity ($dN_{ch}/dη$) and follows a scaling behavior. The $dN_{ch}/dη$ dependence of the yield ratio is compared to calculations from coalescence and thermal models. Enhancements in the yield ratios relative to the coalescence baseline are observed in the 0%-10% most central collisions at 19.6 and 27 GeV, with a significance of 2.3σ and 3.4σ, respectively, giving a combined significance of 4.1σ. The enhancements are not observed in peripheral collisions or model calculations without critical fluctuation, and decreases with a smaller $p_T$ acceptance. The physics implications of these results on the QCD phase structure and the production mechanism of light nuclei in heavy-ion collisions are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ion-driven destabilization of a toroidal electron plasma—A 3D3V PIC simulation

Ion-driven destabilization of a toroidal electron plasma in a small aspect ratio axisymmetric toroidal device is reported for A r + ions of different initial density values using a high fidelity 3D3V PIC solver. Stability of a recently discovered quiescent quasi-steady state (QQS) of a toroidal electron plasma obtained from “seed” solution as a result of entropy extremization at zero inertia is addressed in the presence of a small ion population. An initial value (f0) of the ion fraction (f = n i / n e) and the corresponding secondary electrons are “preloaded” into the system after the electron plasma attains a QQS state. This procedure is regarded as a proxy to the conventional production of ions in the experimental devices via impact ionization. The resulting electron plasma exhibits destabilized “center of charge motion” (m = 1) along with higher order harmonics with dominant power in the second harmonic. Gradual loss of ions (and also electrons) is observed resulting in time varying f values. Beyond a certain value of f0 (≥ 0.005), growth in wall probe current is observed, which saturates at later simulation time due to the loss of particles. In conclusion, trajectories of ion particles indicate ion trapping in the potential well, which is qualitatively similar to the ion resonance instability in pure electron plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗