Search NASA⌕ Search

SEARCH · Search NASA

Results for “isomer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

The prediction of the noise of supersonic propellers in time domain - New theoretical results

In this paper, a new formula for the prediction of the noise of supersonic propellers is derived in the time domain which is superior to the previous formulations in several respects. The governing equation is based on the Ffowcs Williams-Hawkings (FW-H) equation with the thickness source term replaced by an equivalent loading source term derived by Isom (1975). Using some results of generalized function theory and simple four-dimensional space-time geometry, the formal solution of the governing equation is manipulated to a form requiring only the knowledge of blade surface pressure data and geometry. The final form of the main result of this paper consists of some surface and line integrals. The surface integrals depend on the surface pressure, time rate of change of surface pressure, and surface pressure gradient. These integrals also involve blade surface curvatures. The line integrals which depend on local surface pressure are along the trailing edge, the shock traces on the blade, and the perimeter of the airfoil section at the inner radius of the blade. The new formulation is for the full blade surface and does not involve any numerical observer time differentiation. The method of implementation on a computer for numerical work is also discussed.

Farassat, F.↗
NASA NTRS1983

HCN formation on Jupiter - The coupled photochemistry of ammonia and Acetylene

HCN formation in the upper troposphere and lower stratosphere of Jupiter is presently modeled in terms of UV pyrolysis of the C2H5N isomer aziridine, which is a product of the NH2 and C2H3 radicals that originate from ammonia photolysis and the addition of H atoms to acetylene, respectively. The sensitivity of the HCN column density to the individual rate constants and the eddy diffusion coefficient profile is considered, along with the possibility that additional HCN-yielding pathways may exist. Both ammonia and phosphine are strongly depleted by photolysis.

Kaye, J. A.↗
NASA NTRS1984

Solution of the wave equation for open surfaces involving a line integral over the edge

A simple mathematical model of a stationary source distribution for the supersonic-propeller noise-prediction formula of Farassat (1983) is developed to test the validity of the formula solutions. The conventional thickness source term is used in place of the Isom thickness formula; the relative importance of the line and surface integrals in the solutions is evaluated; and the numerical results are compared with those obtained with a conventional retarded-time solution in tables. Good agreement is obtained over elevation angles from 10 to 90 deg, and the line-integral contribution is found to be significant at all elevation angles and of the same order of magnitude as the surface-integral contribution at angles less than 30 deg. The amplitude-normalized directivity patterns for the four cases computed (x = 1.5 or 10; k = 5.0 or 50) are presented graphically.

Farassat, F.↗
NASA NTRS1985

Increasing Fire Safety of Epoxies

Epoxy with increased resistance to fire made by reacting any of three commercial epoxide monomers with curing agent consisting of mixture of isomers called "DCEPD". Curing agent incorporates phosphorus and chlorine directly into crosslinking part of polymer. DCEPD produced by nitrating precursor phosphonylmethyl benzene, then reducing resulting isomeric mixture of dinitro compounds.

Kourtides, D. A.↗
NASA NTRS1985

Reversing Glass Wettability

Treatment reverses wettability of glassware: Liquids that normally wet glass no longer do, and those that do not wet glass are made to do so. Useful in research on container effects in nucleation and growth of secondary phase from solution. Treatment consists of spreading 3 percent (by weight) solution of silicone oil in hexane isomers over glass, drying in air, and curing at 300 degrees C in vacuum for one hour.

Frazier, D. O.↗
NASA NTRS1984

Energetics of the protonation of CO - Implications for the observation of HOC(+) in dense interstellar clouds

A number of molecular species on the H3CO(+) energy hypersurface is examined. Ab initio molecular orbital theory is used to determine the structures and relative energetics of the two isomers of HCO(+) and HOC(+) together with the affinity of CO for protonation at either end. The proton affinities of H2 and H2CO are also examined. The calculations are performed using large basis sets and include the effects of electron correlation. The calculated vibrational frequencies are used to correct for zero point energy differences. The results show that the proton affinities of H2 and CO to form HOC(+) are within 1 kcal of each other. The calculations demonstrate that there is no thermodynamic driving force to form HOC(+) in collisions of H3(+) with CO, and that the formation of HCO(+) in such collisions is very exoergic. A plausible mechanism is suggested to explain the differences observed between the laboratory and the interstellar medium.

Dixon, D.↗
NASA NTRS1984

Kinetics of the reaction Cl + NO2 + M

Using atomic chlorine resonance fluorescence at 140 nm to detect the decay of atomic chlorine in the presence of an excess of NO2, the rate constant for the reaction Cl + NO2 + M, where M is the total gas concentration, is measured over the temperature range 264 to 417 K and at a pressure 1 to 7 torr in a discharge flow system. The rate constants for M= He and M= N2 are measured and the results are summarized in a table. The systematic error of the rate constants is estimated to be about 15 percent. A static photolysis system coupled with an FTIR spectrophotometer is used to determine the branching ratio for the formation of two possible isomers. The ratio is concluded to be ClONO (greater than or equal 75 percent) and ClNO2 (less than or equal 25 percent) which is in agreement with the results of Niki et al. (1978).

Leu, M.-T.↗
NASA NTRS1985

Conformational properties, torsional potential, and vibrational force field for methacryloyl fluoride - An ab initio investigation

The structure, torsional potentials, vibrational spectra, and harmonic force fields for s-cis and s-trans isomers of methacryloyl fluoride are examined to understand the conformational properties of the molecules and their relationship to macroscopic polymer properties. The structure is found to be in good agreement with experiment. It is shown by calculations that the energy difference between the cis and the transisomers is less than 1 kcal/mol at both the split valence and the split valence polarized levels, with the trans form favored. Analysis of the torsional potentials indicates that a rigid rotor model provides a reasonable description of the motion of the COF group in the molecule. The torsional barrier to interconvert the s-trans to the s-cis form is found to be 7.0 kcal/mol. A fit of the data to a three-term Fourier series shows that it is possible to reproduce the experimentally derived barrier, even though a direct determination indicates that the barrier is higher.

Laskowski, B. C.↗
NASA NTRS1985

Moessbauer studies on LaNi(4.7)Sn(0.3) and its hydride

Moessbauer measurements were made on LaNi(4.7)Sn(0.3) at room and liquid nitrogen temperatures. Experimental data yielded a singlet at room temperature and a doublet at liquid-nitrogen temperature. Spectra of the hydrided sample yielded a doublet at liquid-nitrogen temperature with an increase in the quadrupole splitting compared to the unhydrided spectra, but no change in the isomer shift. These data indicate that there is no significant interaction between the tin and the hydrogen. The magnetic character remained the same down to liquid-nitrogen temperature as evidenced by the Moessbauer data. X-ray diffraction measurements on the hydride showed an expanded lattice with the same structure as found for the unhydrided sample. A decrease in particle size was observed upon hydriding.

Oliver, F. W.↗
NASA NTRS1985

Ionized polycyclic aromatic hydrocarbons and the diffuse interstellar bands

A good case has recently been made that the unidentified infrared emission features arise from positively charged, partially hydrogenated polycyclic aromatic hydrocarbons (PAHs). In this letter it is suggested that these exceedingly stable ions are also the carriers of the diffuse interstellar bands. Although a large variety of PAH isomers is possible, the more condensed forms are substantially more stable than the less condensed forms and are expected to be dominant in the harsh interstellar environment. While neutral PAHs do not absorb in the visible, their ionized counterparts do. Because of their low ionization potential, a substantial fraction of the interstellar PAHs will be ionized. Visible spectra of the most stable PAH cations isolated in glasses are compared directly to the interstellar band spectra. Although the laboratory spectra are on an extremely compressed scale and solid state shifts are present, the comparison is favorable. Since little information is available concerning the spectroscopic properties of these species in the gas phase, a considerable amount of laboratory and theoretical work is called for to test this hypothesis.

Crawford, M. K.↗
NASA NTRS1985

Processing Science and Technology

The heat capacity at constant pressure,Cp, of poly-p-xylylene (PPX) was measured from 220 to 625 degrees K using differential scanning calorimetry. The heat capacities at constant volume, Cv, of both PPX and its isomer polystyrene (PS were interpreted using literature data on full normal mode calculations for PS and estimates from low molecular weight analogues for PPX for the 39 group vibrations. Nine skeletal vibrations were used with theta sub 1 and theta sub 3 temperatures of 534.5 degrees K and 43.1 degrees K for PS. It was also possible to calculate a heat capacity contribution of a phenylene group within a polymer chain. Single 48-vibration theta sub 1 temperatures of 3230 degrees K for PS and 2960 degrees K for PPX are sufficient to describe Cv above 220 degrees K. Below 140 deg K, PS heat capacity shows deviations from the Tarasov treatment.

Source record↗
NASA NTRS1985

Development of tungsten-tantalum generator

The purpose of this project was to develop a useable tungsten (W)/tantalum (Ta) generator. Ta-178 is formed following the decay of its parent, W-178 (half-life: 21.7d) and has a half life of 9.3 minutes in turn yielding stable Hf-178. The decay of the parent isotope (W-178) occurs entirely by electron capture to the 9.3 minute Ta-178 state, without feeding the high spin Ta-178 isomer (half life 2.2 hours). In Ta-178 decay, 99.2% of the disintegrations proceed by electron capture and 0.18% by positron emission. Electron capture results in a 61.2% branch to the ground state of Hf-178 and 33.7% to the first excited state at 93 1KeV. The most prominent features of the radionuclide's energy spectrum are the hafnium characteristic radiation peaks with energies between 54.6 and 65.0 KeV. The radiation exposure dose of Ta-118 was calculated to be approximately one-twentieth that of Tc-99m on a per millicurie basis. A twenty-fold reduction in radiation exposure from Ta-178 compared with Tc-99m means that the usual administered dose can be increased three or four times, greatly increasing statistical accuracy while reducing radiation exposure by a factor of five.

Leblanc, A.↗
NASA NTRS1986

Boundary conditions for the paleoenvironment: Chemical and Physical Processes in dense interstellar clouds

The present research includes searches for important new interstellar constituents; observations relevant to differentiating between different models for the chemical processes that are important in the interstellar environment; and coordinated studies of the chemistry, physics, and dynamics of molecular clouds which are the sites or possible future sites of star formation. Recent research has included the detection and study of four new interstellar molecules; searches which have placed upper limits on the abundance of several other potential constituents of interstellar clouds; quantitative studies of comparative molecular abundances in different types of interstellar clouds; investigation of reaction pathways for astrochemistry from a comparison of theory and the observed abundance of related species such as isomers and isotopic variants; studies of possible tracers of energenic events related to star formation, including silicon and sulfur containing molecules; and mapping of physical, chemical, and dynamical properties over extended regions of nearby cold molecular clouds.

Irvine, W. M.↗
NASA NTRS1985

Laboratory and astronomical identification of cyclopropenylidene, C3H2

Twenty-seven rotational lines of C3H2 have been identified in the laboratory or in astronomical sources, and the rotational and centrifugal distortion constants of this previously unobserved carbene ring determined to high accuracy. The assigned astronomical transitions include the strong, ubiquitous interstellar lines at 85,338 MHz and 18,343 MHz, which are the lowest lying transitions of ortho C3H2:2(12) to 1(01) and 1(10) to 1(01), respectively. Interstellar C3H2 can be rapidly formed by dissociative recombination of the very stable ion C3H3(+), which in turn can be produced from acetylene in only two stars. In standard molecular sources such as Ori A and Sgr B2, C3H2 is only moderately abundant, but in diffuse molecular clouds it may be one of the most abundant molecules. There is some radio spectroscopic evidence for two related molecules in Sgr B2 or TMC-1: ethynylmethylene HCCCH, a hypothetical carbon chain isomer, and cyclopropene, C3H4, a known, stable three-membered ring.

Thaddeus, P.↗
NASA NTRS1986

Polyimides containing oxyethylene units. Part 4: Polymerization of dianhydrides containing ether linkages

The development of new composite resins for various aerospace applications is attempted. Although it is highly desirable that these polymers be soluble in order to facilitate processing, they must display considerable solvent-resistance in use. A recent approach has involved the synthesis of a new series of polyimides containing flexible linkages. The polymers were prepared by the polymerization of aromatic dianhydrides with diamines containing oxyethylene linkages. For example, the polymerization of 3,3',4,4'-benzophenonetetracarboxylic dianhydride (BTDA) with 1,2-bis(4-aminophenoxy)ethane (1a) and bis2-(4-aminophenoxy)ethylether (lb), afforded highly crystalline polyimides that were completely insoluble. However, a polyimide that was amorphous and soluble was obtained from the polymerization of BTDA and an isomer of lb, i.e., bis2-(3-aminophenoxy)ethyl ether (4b). In an attempt to obtain a soluble, amorphous polyimide that could be annealed into a crysalline state, block copolymers of 1b and 4b and BTDA were prepared. Copolymers containing less than 20 weight % 1b were soluble in organic solvents. However, these polymers did not crystallize when heated above their Tg's. Copolymers containing higher levels of 1b were semicrystalline and insoluble. The polymerization of the diamines containing oxyethylene linkages with 4,4'-oxydiphthalic anhydride (ODPA) and a new dianhydride, i.e., 4,4'-oxyethyleneoxyethyleneoxydiphthalic anhydride (OEDA) was investigated. It was postulated that the use of these more flexible dianhydrides would result in more processable polyimides.

Harris, F. W.↗
NASA NTRS1986

Polymer precursors for ceramic matrix composites

The synthesis and characterization of a polycyclohexasilane is reported. Because of its cyclic structure, it is anticipated that this polymer might serve as a precursor to SIC having a high char yield with little rearrangement to form small, volatile cyclic silanes, and, as such, would be of interest as a precursor to SiC composite matrices and fibers, or as a binder in ceramic processing. Several approaches to the synthesis of a bifunctional cyclic monomer were attempted; the most successful of these was metal coupling of PhMeSiCl2 and Me2SiCl2. The procedure gives six-membered ring compounds with all degrees of phenyl substitution, from none to hexaphenyl. The compounds with from 0-2 groups were isolated and characterized. The fraction with degree of phenyl substitution equal to 2, a mixture of cis and trans 1,2-; 1,3-; and 1,4 isomers, was isolated in 32 percent yield. Pure 1,4 diphenyldecamethylcyclohexasilane was isolated from the mixed diphenyl compounds and characterized. Diphenyldecamethylcyclohexasilanes were dephenylated to dichlorodecamethylcyclohexasilanes by treating with H2SO4.NH4Cl in benzene. The latter were purified and polymerized by reacting with sodium in toluene. The polymers were characterized by HPGPC, elemental analysis, proton NMR, and IR. Thermogravimetric analyses were carried out on the polymers. As the yield of residual SiC was low, polymers were heat treated to increase the residual char yield. As high as 51.52 percent residual char yield was obtained in one case.

Litt, M. H.↗
NASA NTRS1987

Perovskite oxides: Oxygen electrocatalysis and bulk structure

Perovskite type oxides were considered for use as oxygen reduction and generation electrocatalysts in alkaline electrolytes. Perovskite stability and electrocatalytic activity are studied along with possible relationships of the latter with the bulk solid state properties. A series of compounds of the type LaFe(x)Ni1(-x)O3 was used as a model system to gain information on the possible relationships between surface catalytic activity and bulk structure. Hydrogen peroxide decomposition rate constants were measured for these compounds. Ex situ Mossbauer effect spectroscopy (MES), and magnetic susceptibility measurements were used to study the solid state properties. X ray photoelectron spectroscopy (XPS) was used to examine the surface. MES has indicated the presence of a paramagnetic to magnetically ordered phase transition for values of x between 0.4 and 0.5. A correlation was found between the values of the MES isomer shift and the catalytic activity for peroxide decomposition. Thus, the catalytic activity can be correlated to the d-electron density for the transition metal cations.

Carbonio, R. E.↗