Search NASA⌕ Search

SEARCH · Search NASA

Results for “isotope labeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Chemically Separable Ruthenium Hydride Isomers with Distinct Hydride Transfer Properties

Transition metal hydrides are key intermediates in biological and industrial catalysis, where control over hydride donor ability (hydricity) is essential for optimizing reactivity. Herein, we report a series of isomeric ruthenium hydrides in which the ligand trans to the ruthenium hydride bond–either an N-heterocyclic carbene or pyridine–modulates the thermodynamic hydricity by up to 8 kcal mol –1 . These hydrides exhibited distinct reactivity toward CO 2 and various organic hydride acceptors, enabling detailed kinetic and mechanistic analysis. Stopped-flow experiments, isotopic labeling, and computational studies supported an outer-sphere hydride transfer mechanism. Linear free energy relationships (LFERs) and Marcus relationships were utilized to correlate the changes in thermodynamics and kinetics, revealing that ligands with strong trans effects and trans influence can disrupt conventional scaling relationships, which can be a powerful strategy for promoting new reactivity paradigms in hydride transfer reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

In Situ Insights into Enhanced Cooperative Ligand Exchange Kinetics via Solvent-Induced Restacking in a 2D Metal–Organic Framework

Understanding the reaction kinetics at catalytically active sites is crucial for integrating catalytic two-dimensional (2D) materials into industrial processes. This study focuses on in situ observation of ligand exchange kinetics and solvent-assisted structural restacking transition in the 2D paddle wheel-based MOF [Cu 2 (dttc) 2 ] n (DUT-134(Cu), dttc = dithieno[3,2-b:2′,3′- d]thiophene-2,6-dicarboxylate). The ligand exchange process, involving the replacement of dimethylformamide (DMF) with nitriles such as acetonitrile (ACN), pentanenitrile, and heptanenitrile, was investigated using advanced in situ characterization techniques with high temporal resolution, including powder X-ray diffraction and Raman spectroscopy. The larger analytes exhibited reduced exchange rates, consistent with enhanced steric hindrance and greater diffusion constraints. Interestingly, the study revealed that the exchange of DMF with ACN induces a structural transition to higher symmetry within few seconds, a transition from AB to AA stacking mode of the layers, and a widening of the interlayer distance. Crucially, this structural transition dramatically accelerates the solvent exchange process through cooperative effects, offering critical advantages for catalytic applications. Notably, the reverse exchange from ACN to DMF proceeds more slowly and does not reverse the structural changes, but a new phase is formed with preserved AA stacking. By isotope labeling of linker molecules in combination with two complementary theoretical vibrational simulation methods, the precise assignment of Raman bands and the vibrational modes associated with the ligand exchange process could be achieved. These pioneering insights into the dynamic behavior of 2D MOFs, coupled with ligand exchange, establish a highly promising and transformative approach to achieving enhanced tunability and responsiveness in future catalytic applications.

Layers↗
DOE OSTI2026

Precursor-Dependent Routing of Aromatic Amino Acids Determines Lignin Structure in Grasses by Sensitivity-Enhanced Solid-State NMR

Lignin biosynthesis in grasses exhibits unique metabolic flexibility, yet the precursor-specific routing of carbon into lignin polymers remains poorly resolved in planta. Here, we combine 13 C-isotope labeling with solid-state NMR under sensitivity-enhancement by dynamic nuclear polarization (DNP), to directly track phenylalanine- and tyrosine-derived carbon incorporation into the lignin polymer in Brachypodium distachyon. Precursor-specific 13 C labeling reveals that phenylalanine is the dominant contributor to canonical guaiacyl and syringyl lignins, whereas tyrosine preferentially enriches hydroxyphenyl lignin and hydroxycinnamates, including ferulates characteristic of grass cell walls. Two-dimensional 13 C− 13 C correlation NMR resolves distinct lignin moieties arising from each precursor. Disruption of pcoumarate 3-hydroxylase (C3H) selectively impairs phenylalanine-derived lignification, while tyrosine-derived lignin remains comparatively unchanged, maintaining polymer assembly through alternative metabolic routes. These findings show precursordependent control of lignin composition and reveal tyrosine-mediated lignification as a compensatory pathway in grasses. This work also establishes precursor-resolved solid-state NMR and DNP as a powerful framework for dissecting lignin biosynthesis and metabolic plasticity in plant cell walls.

Biopolymers↗
DOE OSTI2024

Development of Nontargeted Workflow of Occupational Exposure by Infrared Ion Spectroscopy and Silicone Wristbands’ Passive Sampling

Monitoring chemical exposure has well-established protocols and procedures for occupational health and industrial hygiene across various career fields and in a variety of occupational and environmental conditions. Iterative analytical development has led to validated methods to provide employers and employees with safe working conditions in terms of industrial hygiene. These validated methods are commonly supported by commercial laboratories. Here, this workflow is explicitly a targeted approach in which sampling media, sample preparation, chemical separation, quantitative target detection, and post processing are well established. This workflow also relies on commercially available chemical surrogates, isotopically labeled internal standards, and certified/standard reference materials from reputable vendors. An untargeted workflow lacks many key ingredients of validated analytical methods to include the known chemical target.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Rainforest-to-pasture conversion stimulates soil methanogenesis across the Brazilian Amazon

The Amazon rainforest is a biodiversity hotspot and large terrestrial carbon sink threatened by agricultural conversion. Rainforest-to-pasture conversion stimulates the release of methane, a potent greenhouse gas. The biotic methane cycle is driven by microorganisms; therefore, this study focused on active methane-cycling microorganisms and their functions across land-use types. We collected intact soil cores from three land use types (primary rainforest, pasture, and secondary rainforest) of two geographically distinct areas of the Brazilian Amazon (Santarém, Pará and Ariquemes, Rondônia) and performed DNA stable-isotope probing coupled with metagenomics to identify the active methanotrophs and methanogens. At both locations, we observed a significant change in the composition of the isotope-labeled methane-cycling microbial community across land use types, specifically an increase in the abundance and diversity of active methanogens in pastures. We conclude that a significant increase in the abundance and activity of methanogens in pasture soils could drive increased soil methane emissions. Furthermore, we found that secondary rainforests had decreased methanogenic activity similar to primary rainforests, and thus a potential to recover as methane sinks, making it conceivable for forest restoration to offset greenhouse gas emissions in the tropics. These findings are critical for informing land management practices and global tropical rainforest conservation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Skeletal Ni electrode-catalyzed C-O cleavage of diaryl ethers entails direct elimination via benzyne intermediates

Diaryl ethers undergo electrocatalytic hydrogenolysis (ECH) over skeletal Ni cathodes in a mild, aqueous process that achieves direct C-O cleavage without initial benzene ring saturation. Mechanistic studies find that aryl phenyl ethers with a single para or meta functional group (methyl, methoxy, or hydroxy) are selectively cleaved to the substituted benzene and phenol, in contrast to recently reported homogeneous catalytic cleavage processes. Ortho positioning of substituents reverses this C-O bond selectivity, except for the 2-phenoxyphenol case. Together with isotope labeling and co-solvent studies, these results point to two distinct cleavage mechanisms: (a) dual-ring coordination and C-H activation, leading to vicinal elimination to form phenol and a surface-bound aryne intermediate which is then hydrogenated and released as the arene; and (b) surface binding in keto form by the phenolic ring of the hydroxy-substituted substrates, followed by direct displacement of the departing phenol. Notably, acetone inhibits the well-known reduction of phenol to cyclohexanol, affording control of product ring saturation. A byproduct of this work is the discovery that the ECH treatment completely defluorinates substrates bearing aromatic C-F and C-CF 3 groupings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electrosynthesis of ethylene glycol from C 1 feedstocks in a flow electrolyzer

Ethylene glycol is a widely utilized commodity chemical, the production of which accounts for over 46 million tons of CO 2 emission annually. Here we report a paired electrocatalytic approach for ethylene glycol production from methanol. Carbon catalysts are effective in reducing formaldehyde into ethylene glycol with a 92% Faradaic efficiency, whereas Pt catalysts at the anode enable formaldehyde production through methanol partial oxidation with a 75% Faradaic efficiency. With a membrane-electrode assembly configuration, we show the feasibility of ethylene glycol electrosynthesis from methanol in a single electrolyzer. The electrolyzer operates a full cell voltage of 3.2 V at a current density of 100 mA cm -2 , with a 60% reduction in energy consumption. Further investigations, using operando flow electrolyzer mass spectroscopy, isotopic labeling, and density functional theory (DFT) calculations, indicate that the desorption of a *CH 2 OH intermediate is the crucial step in determining the selectively towards ethylene glycol over methanol.

09 BIOMASS FUELS↗
DOE OSTI2023

Highly active, ultra-low loading single-atom iron catalysts for catalytic transfer hydrogenation

Highly effective and selective noble metal-free catalysts attract significant attention. Here, a single-atom iron catalyst is fabricated by saturated adsorption of trace iron onto zeolitic imidazolate framework-8 (ZIF-8) followed by pyrolysis. Its performance toward catalytic transfer hydrogenation of furfural is comparable to state-of-the-art catalysts and up to four orders higher than other Fe catalysts. Isotopic labeling experiments demonstrate an intermolecular hydride transfer mechanism. First principles simulations, spectroscopic calculations and experiments, and kinetic correlations reveal that the synthesis creates pyrrolic Fe(II)-plN 3 as the active center whose flexibility manifested by being pulled out of the plane, enabled by defects, is crucial for collocating the reagents and allowing the chemistry to proceed. The catalyst catalyzes chemoselectively several substrates and possesses a unique trait whereby the chemistry is hindered for more acidic substrates than the hydrogen donors. This work paves the way toward noble-metal free single-atom catalysts for important chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Global protein turnover quantification in Escherichia coli reveals cytoplasmic recycling under nitrogen limitation

Protein turnover is critical for proteostasis, but turnover quantification is challenging, and even in well-studied E. coli, proteome-wide measurements remain scarce. Here, we quantify the turnover rates of ~3200 E. coli proteins under 13 conditions by combining heavy isotope labeling with complement reporter ion quantification and find that cytoplasmic proteins are recycled when nitrogen is limited. We use knockout experiments to assign substrates to the known cytoplasmic ATP-dependent proteases. Surprisingly, none of these proteases are responsible for the observed cytoplasmic protein degradation in nitrogen limitation, suggesting that a major proteolysis pathway in E. coli remains to be discovered. Lastly, we show that protein degradation rates are generally independent of cell division rates. Thus, we present broadly applicable technology for protein turnover measurements and provide a rich resource for protein half-lives and protease substrates in E. coli, complementary to genomics data, that will allow researchers to study the control of proteostasis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Selective semihydrogenation of acetylene in ethylene using defect-rich boron nitride catalyst from flux reconstruction

Efficient removal of trace acetylene from ethylene streams is essential for producing polymer-grade ethylene, yet achieving highly selective semihydrogenation without over-hydrogenation remains a long-standing challenge. A key barrier is the lack of a simple, low-cost catalyst that can activate hydrogen effectively while preventing ethylene from reacting further. Here we show that defect-rich boron nitride, prepared through a straightforward flux reconstruction method, serves as a highly selective and metal-free catalyst for acetylene semihydrogenation. The catalyst contains abundant open boron and nitrogen sites that enable efficient hydrogen activation and rapid release of ethylene, thereby avoiding over-hydrogenation. Experiments combined with isotope labeling and theoretical analysis reveal that these defects lower the energy barrier for hydrogen activation while accelerating product desorption. Our findings demonstrate a scalable strategy for defect engineering in boron nitride and highlight its potential as a robust, sustainable alternative to metal-based catalysts in industrial ethylene purification.

Wang, Tao [Oak Ridge National Laboratory (ORNL), O↗
DOE OSTI2024

Upcycling of polyethylene to gasoline through a self-supplied hydrogen strategy in a layered self-pillared zeolite

Conversion of plastic wastes to valuable carbon resources without using noble metal catalysts or external hydrogen remains a challenging task. Here we report a layered self-pillared zeolite that enables the conversion of polyethylene to gasoline with a remarkable selectivity of 99% and yields of >80% in 4 h at 240 °C. The liquid product is primarily composed of branched alkanes (selectivity of 72%), affording a high research octane number of 88.0 that is comparable to commercial gasoline (86.6). In situ inelastic neutron scattering, small-angle neutron scattering, solid-state nuclear magnetic resonance, X-ray absorption spectroscopy and isotope-labelling experiments reveal that the activation of polyethylene is promoted by the open framework tri-coordinated Al sites of the zeolite, followed by β-scission and isomerization on Brönsted acids sites, accompanied by hydride transfer over open framework tri-coordinated Al sites through a self-supplied hydrogen pathway to yield selectivity to branched alkanes. This study shows the potential of layered zeolite materials in enabling the upcycling of plastic wastes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Activity-targeted metaproteomics uncovers rare syntrophic bacteria central to anaerobic community metabolism

Syntrophic microbial consortia can contribute significantly to the activity and function of anoxic ecosystems, yet are often too rare to study their in situ physiologies using traditional molecular methods. Here, in this study, we describe a technical innovation combining bioorthogonal non-canonical amino acid tagging (BONCAT), stable isotope probing, and metaproteomics to improve the recovery of proteins from active community members and track isotope incorporation. Both click chemistry-enabled cell-sorting and direct protein pulldown coupled to metaproteomics improved recovery of isotopically labeled proteins during acetate oxidation within a full-scale anaerobic digester. Resulting labeled protein expression profiles revealed elevated activity of a rare and uncharacterized syntrophic bacterium belonging to the family Natronincolaceae. BONCAT-based capture of newly translated proteins provided direct molecular evidence for the expression of a previously hypothesized oxidative glycine pathway for syntrophic acetate oxidation by this microorganism, showcasing the potential of targeted metaproteomics to characterize rare and active cells central to community metabolism in natural and engineered ecosystems.

Friedline, Skyler [Univ. of British Columbia, Vanc↗
DOE OSTI2023

New thermal decomposition pathway for TATB

Abstract Understanding the thermal decomposition behavior of TATB (1,3,5-triamino-2,4,6-trinitrobenzene) is a major focus in energetic materials research because of safety issues. Previous research and modelling efforts have suggested benzo-monofurazan condensation producing H 2 O is the initiating decomposition step. However, early evolving CO 2 (m/z 44) along with H 2 O (m/z 18) evolution have been observed by mass spectrometric monitoring of head-space gases in both constant heating rate and isothermal decomposition studies. The source of the CO 2 has not been explained, until now. With the recent successful synthesis of 13 C 6 -TATB ( 13 C incorporated into the benzene ring), the same experiments have been used to show the source of the CO 2 is the early breakdown of the TATB ring, not adventitious C from impurities and/or adsorbed CO 2 . A shift in mass m/z 44 (CO 2 ) to m/z 45 is observed throughout the decomposition process indicating the isotopically labeled 13 C ring breakdown occurs at the onset of thermal decomposition along with furazan formation. Partially labeled (N 18 O 2 ) 3 -TATB confirms at least some of the oxygen comes from the nitro-groups. This finding has a significant bearing on decomposition computational models for prediction of energy release and deflagration to detonation transitions, with respect to conditions which currently do not recognize this oxidation step.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Are the Brønsted acid sites in amorphous silica-alumina bridging?

Competing models exist to explain the differences in the activity of zeolites and amorphous silica–aluminas. Some postulate that silica–alumina contains dilute zeolitic bridging acid sites, while others favor a pseudo-bridging silanol model. Here, we employed a selective isotope labeling strategy to assess the existence of Si–O(H)–Al bonds using NMR-based distance measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Lessons from combined experimental and theoretical examination of the FTIR and 2D-IR spectroelectrochemistry of the amide I region of cytochrome c</em

Amide I difference spectroscopy is widely used to investigate protein function and structure changes. In this article, we show that the common approach of assigning features in amide I difference signals to distinct secondary structure elements in many cases may not be justified. Evidence comes from Fourier transform infrared (FTIR) and 2D-IR spectroelectrochemistry of the protein cytochrome c in the amide I range, in combination with computational spectroscopy based on molecular dynamics (MD) simulations. This combination reveals that each secondary structure unit, such as an alpha-helix or a beta-sheet, exhibits broad overlapping contributions, usually spanning a large part of the amide I region, which in the case of difference absorption experiments (such as in FTIR spectroelectrochemistry) may lead to intensity-compensating and even sign-changing contributions. We use cytochrome c as the test case, as this small electron-transferring redox-active protein contains different kinds of secondary structure units. Upon switching its redox-state, the protein exhibits a different charge distribution while largely retaining its structural scaffold. Our theoretical analysis suggests that the change in charge distribution contributes to the spectral changes and that structural changes are small. However, in order to confidently interpret FTIR amide I difference signals in cytochrome c and proteins in general, MD simulations in combination with additional experimental approaches such as isotope labeling, the insertion of infrared labels to selectively probe local structural elements will be required. In case these data are not available, a critical assessment of previous interpretations of protein amide I 1D- and 2D-IR difference spectroscopy data is warranted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Intracellular pathways for lignin catabolism in white-rot fungi

White-rot fungi, the most efficient organisms at breaking down lignin from wood in Nature, utilize lignin degradation products as a carbon source. 15 Lignin is a biopolymer found in plant cell walls that accounts for 30% of the organic carbon in the biosphere. White-rot fungi (WRF) are considered the most efficient organisms at degrading lignin in Nature. While lignin depolymerization by WRF has been exhaustively studied, the possibility that WRF are able to utilize lignin as a carbon source is still a matter of controversy. Here we employ 13C-labeling and systems biology approaches to demonstrate that two WRF, Trametes versicolor and Gelatoporia subvermispora, funnel lignin-derived aromatic compounds into central carbon metabolism via intracellular catabolic pathways. These results provide insights into global carbon cycling in 20 soil ecosystems, and furthermore establishes a foundation for employing WRF in simultaneous lignin depolymerization and bioconversion to bioproducts – a key step towards enabling a sustainable bioeconomy.

Del Cerro, Carlos↗
DOE OSTI2021

Phytoplankton exudates and lysates support distinct microbial consortia with specialized metabolic and ecophysiological traits

Marine dissolved organic matter, which originates from phytoplankton, holds as much carbon as Earth’s atmosphere; yet, the biological processes governing its fate are primarily studied under idealized laboratory conditions or through indirect measures such as genome sequencing. In this work, we used isotope labeling to directly quantify uptake of complex carbon pools from the two primary sources of marine organic carbon (diatoms and cyanobacteria) by a natural microbial community. Furthermore, our data show that carbon pools are partitioned into distinct microbial lineages whose physiological properties and resource acquisition strategies match the chemical nature of their preferred substrates. Our results provide ecological and functional insights into the patterns of microbial community structure changes that occur during marine phytoplankton blooms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Facile and dynamic cleavage of every iron–sulfide bond in cuboidal iron–sulfur clusters

Nature employs weak-field metalloclusters to support a wide range of biological processes. The most ubiquitous metalloclusters are the cuboidal Fe–S clusters, which are comprised of Fe sites with locally high-spin electronic configurations. Such configurations enhance rates of ligand exchange and imbue the clusters with a degree of structural plasticity that is increasingly thought to be functionally relevant. Here, we examine this phenomenon using isotope tracing experiments. Specifically, we demonstrate that synthetic [Fe 4 S 4 ] and [MoFe 3 S 4 ] clusters exchange their Fe atoms with Fe 2+ ions dissolved in solution, a process that involves the reversible cleavage and reformation of every Fe–S bond in the cluster core. This exchange is facile—in most cases occurring at room temperature on the timescale of minutes—and documented over a range of cluster core oxidation states and terminal ligation patterns. In addition to suggesting a highly dynamic picture of cluster structure, these results provide a method for isotopically labeling pre-formed clusters with spin-active nuclei, such as 57 Fe. Such a protocol is demonstrated for the radical S -adenosyl- l -methionine enzyme, RlmN.

Science & Technology - Other Topics↗