Search NASA⌕ Search

SEARCH · Search NASA

Results for “isotope production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Reactor Performance Improvement Options to Sustain High Flux Isotope Reactor Leadership into the Future

The mission of the Neutron Sciences Directorate (NScD) at the U.S. Department of Energy’s Oak Ridge National Laboratory (ORNL) is the undertaking of high-impact research into the structure and properties of materials across the spectrum of biology, chemistry, physics, materials science, and engineering. NScD operates two world-leading neutron scattering facilities including the High Flux Isotope Reactor (HFIR) and the Spallation Neutron Source. HFIR achieved full power in 1966, and over a half century later, it continues to serve a variety of national missions. HFIR provides one of the highest steady-state neutron fluxes of any research reactor in the world to support scientific missions including cold and thermal neutron scattering, isotope production, and materials irradiation research. To sustain leadership in neutron sciences into the future, ORNL is exploring areas in which HFIR can be improved to enhance its performance. Many improvement areas are being explored such as upgrading the cold source and neutron scattering facilities; however, the improvement areas focused on in this paper include replacing the reactor pressure vessel, upgrading the neutron reflector, and converting from high-enriched uranium to low-enriched uranium fuel.

Chandler, David↗
DOE OSTI2023

The new Device for Indirect Capture Experiments on Radionuclides at LANSCE: Efforts on measuring the resonance(s) responsible for the extremely large 88 Zr (n,γ) cross section

The thermal neutron capture cross section of 88 Zr was recently reported to be the second largest in nature with the largest resonance integral measured. Presumably, these very large values are caused by a resonance or resonances very near thermal energy. Determining their energies and widths, and hence the shape of the cross section away from thermal energies,is useful for applications. The short half-life (83.4 days) and associated large background, renders direct measurements of the neutron capture cross section impossible using current techniques. However, it is possible to measure the total neutron cross section, and hence the resonance properties, using the newly commissioned Device for Indirect Capture Experiments on Radionuclides (DICER) at the Los Alamos Neutron Science Center (LANSCE). Transmission measurements are utilized as a surrogate method to perform capture measurements. The 88 Zr needed for a DICER measurement was produced at the Isotope Production Facility (IPF) and cleanly separated from the production target material. A description of the new instrument, efforts and preliminary results on 88 Zr will be presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Monte Carlo Analysis of Coolant Stream Impurity Gamma Emissions in Gas-Cooled Fast Reactors

It is well established that a rapid increase in the concentration of fission products in the reactor coolant stream can serve as an early indication of fuel failure. We use Monte Carlo simulations to investigate the feasibility of using several gamma detectors as diagnostic equipment to monitor the presence of major fission product isotopes in high-temperature gas-cooled reactor (HTGR) coolant streams for early detection of fuel failure and therefore the prevention of fuel failure conditions. Herein we model the response of high-purity germanium (HPGe), CdZnTe, NaI(Tl), and LaBr 3 (Ce) detectors of typical commercial sizes to the gamma emissions from nuclides expected to be found within the coolant stream of the Versatile Test Reactor (VTR) under development by the U.S. Department of Energy. The results indicate that for the 233- and 250-keV gamma rays from 133 Xe and 135 Xe, respectively, the 3σ detection criterion is met in under 1 min using a single HPGe detector. Changes in other spectral lines associated with Xe nuclides are detected within 1 h regardless of the choice of detector.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Nonfuel antineutrino contributions in the ORNL High Flux Isotope Reactor (HFIR)

Reactor neutrino experiments have seen major improvements in precision in recent years. With the experimental uncertainties becoming lower than those from theory, carefully considering all sources of $\bar{ν}$ e is important when making theoretical predictions. One source of νe that is often neglected arises from the irradiation of the nonfuel materials in reactors. The $\bar{ν}$ e rates and energies from these sources vary widely based on the reactor type, configuration, and sampling stage during the reactor cycle and have to be carefully considered for each experiment independently. In this article, we present a formalism for selecting the possible $\bar{ν}$ e sources arising from the neutron captures on reactor and target materials. We apply this formalism to the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory, the $\bar{ν}$ e source for the the Precision Reactor Oscillation and Spectrum Measurement (PROSPECT) experiment. Overall, we observe that the nonfuel $\bar{ν}$ e contributions from HFIR to PROSPECT amount to 1% above the inverse beta decay threshold with a maximum contribution of 9% in the 1.8–2.0 MeV range. Nonfuel contributions can be particularly high for research reactors like HFIR because of the choice of structural and reflector material in addition to the intentional irradiation of target material for isotope production. We show that typical commercial pressurized water reactors fueled with low-enriched uranium will have significantly smaller nonfuel $\bar{ν}$ e contribution.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Measurements of the 96 Zr(α,n) cross section for astrophysics and applications

The reaction 96 Zr(α,n) plays an important role in ν-driven wind nucleosynthesis in core-collapse supernovae and is a possible avenue for medical isotope production. Here, cross section measurements were performed using the activation technique at the Edwards Accelerator Laboratory. Results were analyzed along with world data on the 96 Zr(α, n) cross section and 96 Zr(α, α) differential cross section using large-scale Hauser-Feshbach calculations. We find general agreement between our data, previous measurements, and a statistical description of the reaction. However, we find a larger cross section at low energies compared to prior experimental results, allowing for a larger astrophysical reaction rate. This may impact results of core-collapse supernova ν-driven wind nucleosynthesis calculations, but does not significantly alter prior conclusions about 99 Mo production for medical physics applications. The results from our large-scale Hauser-Feshbach calculations demonstrate that phenomenological optical potentials may yet be adequate to describe (α, n) reactions of interest for ν-driven wind nucleosynthesis, albeit with regionally-adjusted model parameters.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

First Simultaneous Acceleration of Multiple Charge States of Heavy Ion Beams in a Large-Scale Superconducting Linear Accelerator

Experimental studies of the simultaneous acceleration of three-charge-state 129 Xe 49+,50+,51+ beam from 17 to 180 MeV/nucleon in a superconducting linear accelerator are presented. The beam parameters for each individual- and multiple-charge-state beam were measured and compared with the particle tracking simulations. Detailed measurements were performed to characterize the multiple-charge-state beam’s recombination after a second-order achromat and isopath 180° bending system. As a result of the recombination of three charge states in the six-dimensional phase space, the xenon beam intensity was increased by 2.5-fold compared to the single-charge-state beam. Lastly, the results presented in the Letter fully validate the possibility to produce and utilize high-quality multiple-charge-state heavy-ion beams in a large-scale superconducting linac to increase the available beam power on an isotope production target.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

SRF Cavity R&D - Enabling New Frontiers in High Energy Physics and Quantum Science

Advances in SRF research at Fermilab have potential for impact in a wide variety of scientific fields: High energy physics (e.g. PIP-II, proposed colliders), basic energy sciences (e.g. LCLS-II, LCLS-II HE), nuclear physics (e.g. proposed MaRIE, EIC), Quantum Science (see quantum lab for details), dark matter searches (e.g. ADMX g-2), and industrial particle accelerators for wastewater treatment, cancer treatment, isotope production, and more.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Measurements of Extinct Radionuclides in Filter Paper Samples

Radiochemical diagnostics rely on measurements of short-lived fission product isotopes. Once months to years have passed since isotope formation, the most useful short-lived signatures have decayed away and become extinct. Recent work at our lab has developed new methods to reconstruct the concentrations of extinct radionuclides using mass spectrometry to measure the stable daughter elements formed from radioactive decay. However, the applicability of these techniques to different types of samples has not been fully investigated.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Separation and Purification of Berkelium-249 and Einsteinium-254

Berkelium-249 ( 249 Bk) and einsteinium-254 ( 254 Es) are isotopes of great importance for the investigation of berkelium and einsteinium chemical properties and super heavy element research. Therefore, it is necessary to be able to isolate acceptable, pure quantities of both isotopes to further research capabilities. These isotopes, along with californium-252 ( 252 Cf), are synthesized through the irradiation of mixed-curium targets in the High Flux Isotope Reactor (HFIR), which has the highest continuous thermal neutron flux in the world. Once irradiated, the targets are transferred to the Radiochemical Engineering Development Center for further chemical processing and final purification to separate 249 Bk and 254 Es from the remainder of isotopes present. Several methods of separation, such as the Berkex batch solvent extraction along with cation-exchange and alpha-hydroxy-isobutyrate (AHIB) columns, are employed to achieve a clean separation of the isotopes. Production Campaigns 74–77 are discussed in depth for 252 Cf, 249 Bk, and 254 Es production and isolation of 249 Bk and 254 Es. An attempt to isolate 257 Fm in Campaign 77 is discussed as well. Table 1 summarizes the total amount of material isolated in each campaign.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Compact, Achromatic Non-scaling FFAG Accelerator for HEP, Commercial and Medical Applications (CRADA FRA-2008-0005 Final Report)

Proton and light-ion accelerators have many research and medical applications, but the current state of technology in accelerators severely limits their widespread use: (1) synchrotrons have an intrinsic low duty cycle and become quite large for light ions; and (2) cyclotrons do not have energy variability and require complex superconducting magnets for high energy. A new concept in non-scaling Fixed-Field Alternating-Gradient (FFAGs) has been invented that incorporates both the energy variability of the synchrotron and the high duty cycle of the cyclotron. The concept uses normal-conducting, combined-function magnets that apply only constant (dipole) and linear-gradient (quadrupole) fields to stabilize the accelerator. This project will develop an optimized design for a new non-scaling and cost-effective innovation in FFAG accelerators. The accelerator design will have optics that can stably accelerate protons to 250 MeV (or higher) and carbon ions to =200 MeV, an energy considered ideal for radiation therapy. Phase I will optimize, fully simulate, and demonstrate the feasibility of this accelerator. Commercial Applications and other Benefits as described by the awardee: The fixed-field acceleration concept should eliminate some of the most pronounced technical difficulties, expense, maintenance, and required expertise faced in conventional proton and light-ion accelerators. In addition to the application for high energy physics, these accelerators should have application in cancer treatment, radiopharmaceuticals, and medical isotope production, and materials science.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Review of the Technical Basis for Properties and Fuel Performance Data Used in HEU to LEU Conversion Analysis for U-10Mo Monolithic Alloy Fuel

This report provides the technical basis for properties and fuel performance data used in conversion analysis for U.S. High Performance Research Reactors (USHPRR) that will convert from highly enriched uranium (HEU) to low-enriched uranium (LEU) using a new U-10Mo monolithic alloy fuel that is being qualified. The conditions that the fuel experiences changes between an HEU and LEU fuel element design due to many causes, including the density of the fuel, the presence of U-238 resonant absorber, changes to the plate and coolant channel dimensions, and changes in fuel management due to reactivity or optimization. These types of changes have been documented in operational and safety analyses conducted for conversions over decades for over 70 reactors. These conversions have all, or almost all, required recalculation of safety-related values as well as establishing operational characteristics of the core, including power distribution, reactor core power level, and cycle length between required fuel management. An overall objective of conversion is to change the reactor core design as little as possible while maintaining the reactors’ scientific, isotope production, medical, and engineering missions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Operational and Mission Highlights A Monthly Summary of Top Achievements

In September 2020, the Laboratory’s Chemical Microscopy Facility tripled in size, expanding to 1,000 square feet. Located at TA-46, Building158, this facility houses a unique Laboratory resource. Operated by the Physical Chemistry and Applied Spectroscopy (C-PCS) group, this facility was established to renew the Laboratory’s rich history in radiobiology. The facility combines biological research capabilities with isotope production, as well as radioanalytical and chemical infrastructure. This facility provides space for Biosafety Level 2 (BSL-2) research, with alpha-emitting and other radionuclides of interest associated with biological systems. Equipped with a Class ll/A2 biological safety cabinet, a radiological fume hood and a host of other analytical equipment, this facility serves an effective resource to evaluate the efficacy of targeted alpha therapeutics, as well as the deleterious effects of radiological materials on living organisms. The facility receives funding through LDRD- 20180005DR, “Establishing a Radiotherapeutic Capability to Counter Biothreats,” and the BES Heavy Element Chemistry Program at the Laboratory.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Physical Sciences Vistas Issue 3 2021

In this issue, highlights of our contributions to mission operations include descriptions of the following. • How exact and scrupulous planning in concert with sophisticated science enabled a first-ever direct measurement of a radionuclide with a half-life as short as six days. The work, which included operations at the Los Alamos Neutron Science Centers (LANSCE) Weapons Neutron Research Facility and the Isotope Production Facility’s hot cell facility, is a boon for both astrophysics and weapons science. • An introduction to Christie Davis and her role in ensuring the Lab’s execution of simultaneous excellence. • A look at progress by AOT’s Target and Experimental Support Team in reclaiming long-dormant space in a radiological controlled area for new work improving target systems for the Lujan Center. • A story showcasing a cross-organizational effort to minimize the directorate’s legacy and environmental footprint. Staff from across the Lab joined together to ensure the safe and efficient disposal of Rocky Flats legacy waste stored in a transportainer at the Target Fabrication Facility. • How the Lab’s Utilities and Infrastructure experts collaborated with stakeholders in our directorate to safety execute preventive maintenance on the LANSCE mesa’s large electrical substation. The Safe Conduct of Research principles provided a common framework for the planning and process. • A description of the resources called upon and the procedures undertaken by MPA to inventory the division’s time-sensitive chemicals, including the careful and conscientious response of an alert team member when something seemed amiss.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

REDC Process Instrumentation Modernization Project

Critical electronics used for isotopes production have become outdated and difficult to manufacture. In particular the alpha-particle and neutron detection electronics (commonly referred to as Q2809A-9 and -11) which are used to monitor effluent activity in ORNL Building 7920 were designed and deployed in 1966-67. These electronics are still used but some parts are no longer available for purchase. In addition, the printed circuit boards used in the Count Rate Monitor (CRM) module have no fabrication files or quality assurance documentation. In light of this, a project to modernize the modules for ability to manufacture with modern parts was undertaken. Both the preamplifier and CRM were modernized with new printed circuit boards and parts which are current catalog parts. In addition, QA documentation was generated which allows the manufacturer to assure proper operation prior to delivery.

42 ENGINEERING↗
DOE OSTI2021

Separation and purification of Mo-99 produced from natural U 3 0 8 targets via photo-fission

The most-used medical isotope is 99m Tc (t½ = 6.0 h), which comprises over 80% of isotopes used in nuclear medicine today. It is normally derived from its transient equilibrium parent 99 Mo (t½ = 66 h). A recent surge of interest in using the more proliferation-resistant low-enriched uranium (LEU) under the American Medical Isotope Production Act (AMIPA) has presented this technical challenge: can a domestic supplier meet the estimated weekly U.S. demand of 1500 6–day Ci of 99 Mo?

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Global Security & Strategic Partnerships Programs

Serving the Nation: Our Missions include Providing the Nuclear Deterrent for our Nation and Allies; Leading Nuclear Nonproliferation and Counterterrorism / Counterproliferation efforts to make the world a safer place; Supplying Enriched Uranium Material for Reactors – Naval Propulsion, Army, NASA, Universities, Isotope Production Reactors; Providing High Explosives for the Stockpile and Strategic Partners; Delivering Solutions – Solve emerging national security challenges

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Matter in Extreme Conditions Upgrade (Conceptual Design Report)

The Linac Coherent Light Source (LCLS) X-ray Free Electron Laser (XFEL) is an open-access user facility that delivers ultrashort X-ray pulses that are nine orders of magnitude brighter than any prior source, able to probe the characteristics of matter with unprecedented spatial and temporal precision. The Matter in Extreme Conditions (MEC) instrument at LCLS combines the XFEL with high-power, short-pulse lasers to produce and study high energy density (HED) plasmas to develop the fundamental understanding of plasmas and matter in extreme environments. This has driven a remarkably rich array of high-profile scientific results with applications in fusion energy, isotope production, advanced materials, and medical and nuclear technology. The Matter in Extreme Conditions Upgrade (MEC-U) Project proposes a major upgrade to MEC that would significantly increase the power and repetition rate of the high intensity laser system to the petawatt level (PW, 10 15 Watts) at 10 Hz, increase the energy of the shock-driver laser to the kilojoule level (kJ), and expand the capabilities of the MEC instrument to support groundbreaking experiments enabled by the combination of high-power lasers with the world’s brightest X-ray source.

36 MATERIALS SCIENCE↗
DOE OSTI2022

First Report of the Nuclear Data Subcommittee of the Nuclear Science Advisory Committee

Accurate, reliable nuclear data is essential for the success of Federal missions such as nonproliferation, nuclear forensics, homeland security, national defense, space exploration, clean energy generation, and scientific research. Data access is also key to innovative commercial developments such as new medicines, automated industrial controls, energy exploration, energy security, nuclear reactor design, and isotope production. The United States Nuclear Data Program (USNDP) is the domestic custodian of nuclear data. In its April 2022 meeting, the DOE/NSF Nuclear Science Advisory Committee was charged with preparing two reports on nuclear data. In this first report, we review recent accomplishments of the USNDP and discuss complementary and collaborative international efforts. Detailed descriptions of nuclear data needs for basic science, nonproliferation, national security, nuclear energy together with medical and space applications are also presented. Lastly, a set of specific cross-cutting nuclear data needs with relevance for multiple applications areas are also identified for further discussion in a follow-on report planned for release at the end of January 2023.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗