Results for “land productivity” — Page 9

NASA NTRS2011

Determining Trends in Impervious Cover for the Mobile Bay, AL Region for 1974-2008, Based on a Landsat Time Series

This presentation will discuss the development and use of Landsat-based impervious cover products in conjunction with land use land cover change products to assess multi-decadal urbanization across the Mobile Bay region at regional and watershed scales. This nationally important coastal region has undergone a variety of ephemeral and permanent land use land cover change since the mid-1970s, including gradual but consequential increases in urban surface cover. This urban sprawl corresponds with increased regional percent impervious cover. The region s coastal zone managers are concerned about the increasing percent impervious cover, since it can negatively influence water quality and is an important consideration for coastal conservation and restoration work. In response, we processed multi-temporal Landsat data to compute maps of percent impervious cover for multiple dates from 1974 through 2008, roughly at 5-year intervals. Each year of product was classified using one single date of leaf-on and leaf-off Landsat data in conjunction with Cubist software. We are assessing Landsat impervious cover product accuracy through comparisons to available reference data, including available NLCD impervious cover products from the USGS, raw Landsat data, plus higher spatial resolution aerial and satellite data. In particular, we are quantitatively comparing the 2008 Landsat impervious cover products to those from QuickBird 2.4-meter multispectral data. Initial visual comparisons with the QuickBird impervious cover product suggest that the 2008 Landsat product tends to underestimate impervious cover for high density urban areas and to overestimate impervious cover in established residential subdivisions mixed with forested cover. Landsat TM and ETM data appears to produce more accurate impervious cover products compared to those using lower resolution Landsat MSS data. Although imperfect, these Landsat impervious cover products have helped the Mobile Bay National Estuary Program visualize basic urbanization trends for multiple HUC-12 watersheds of concern to them and their constituents

Spruce, Joseph P.↗

NASA NTRS2001

Intercomparison of GOES-8 Imager and Sounder Land Surface Temperature Retrievals

Recent studies at the Global Hydrology and Climate Center (GHCC) have shown that the assimilation of land skin temperature (LST) tendencies into a mesoscale model can significantly improve short term forecasts of near surface temperature and moisture. The high spatial and temporal resolution of GOES derived land surface products provide valuable information about the spatial and temporal variability of the land surface forcing simulated in the model. In the GHCC studies LST was derived using a split window technique requiring at least two longwave infrared window channels and thus, utilized the 11 and 12 micron channels found on the GOES-8 Imager with a nadir spatial resolution of 4km. However, beginning with the launch of GOES-M (scheduled for mid 2001 ) and subsequent satellites the 12 micron channel will be removed from the Imager leaving only one longwave window channel. The GOES Sounder will continue to have more than one longwave infrared window channel (including a 12 micron channel) but, with a spatial resolution of 10 km nadir. LST retrievals from the newer GOES satellites will thus be derived from Sounder measurements at a reduced spatial resolution. This paper intercompares the LST retrievals from the GOES-8 Imager and Sounder. The effects on the LST retrievals due to the Sounder's reduced resolution from that of the Imager and its different longwave infrared channel characteristics are examined. The effects of transitioning from Imager to Sounder LST products on the results from model assimilation of these products are also examined.

Suggs, Ronnie J.↗

NASA NTRS1997

Land Surface Temperature Measurements from EOS MODIS Data

We made modifications to the linear kernel bidirectional reflectance distribution function (BRDF) models from Roujean et al. and Wanner et al. that extend the spectral range into the thermal infrared (TIR). With these TIR BRDF models and the IGBP land-cover product, we developed a classification-based emissivity database for the EOS/MODIS land-surface temperature (LST) algorithm and used it in version V2.0 of the MODIS LST code. Two V2.0 LST codes have been delivered to the MODIS SDST, one for the daily L2 and L3 LST products, and another for the 8-day 1km L3 LST product. New TIR thermometers (broadband radiometer with a filter in the 10-13 micron window) and an IR camera have been purchased in order to reduce the uncertainty in LST field measurements due to the temporal and spatial variations in LST. New improvements have been made to the existing TIR spectrometer in order to increase its accuracy to 0.2 C that will be required in the vicarious calibration of the MODIS TIR bands.

Wan, Zhengming↗

DOE OSTI2024

AquaPV: Regulatory and Environmental Considerations for Floating Photovoltaic Projects Located on Federally Controlled Reservoirs in the United States

To meet the nation's decarbonization goals, the U.S. Department of Energy's Solar Futures study forecasts that installed solar photovoltaic (PV) capacity must increase nearly tenfold, from 80 gigawatts (GW) in 2020 to approximately 760 GW cumulative installed capacity by 2035. Ground-mounted PV is expected to dominate future solar deployment and will require more than 3.5 million acres of land to meet annual demand projections (of nearly 45 GW) by 2030. However, various competing demands for land (e.g., agricultural production, conservation) and high land acquisition costs in specific locations could be challenges to meeting future PV demand solely with ground-mounted PV deployment. Floating photovoltaics (FPV) may be an alternative in locations where ground-mounted PV is not feasible and aid in reaching the nation's PV deployment and decarbonization goals. FPV is a newer siting approach in which a PV array is affixed to a floating apparatus and sited on a water body like a reservoir behind a dam. FPV systems may be stand-alone or co-located at new or existing hydroelectric facilities or pumped storage hydropower (PSH) facility reservoirs. Co-located FPV systems may or may not be operationally paired and work in tandem with the hydroelectric or PSH facility. This report provides novel analysis to understand the opportunities and challenges associated with developing stand-alone and co-located FPV projects on reservoirs in the United States. Specifically, the report explores potential environmental and energy benefits and environmental impacts associated with the siting, construction, and operation of FPV projects. The report also identifies and analyzes U.S. federal- and state-issued permits and authorizations required by federal laws to understand the licensing pathways and regulatory requirements for FPV projects sited on reservoirs licensed by the Federal Energy Regulatory Commission and on powered and non-powered reservoirs owned by the Bureau of Reclamation or U.S. Army Corps of Engineers.

13 HYDRO ENERGY↗

NASA NTRS1990

Interfacing geographic information systems and remote sensing for rural land-use analysis

Recent advances in computer-based geographic information systems (GISs) are briefly reviewed, with an emphasis on the incorporation of remote-sensing data in GISs for rural applications. Topics addressed include sampling procedures for rural land-use analyses; GIS-based mapping of agricultural land use and productivity; remote sensing of land use and agricultural, forest, rangeland, and water resources; monitoring the dynamics of irrigation agriculture; GIS methods for detecting changes in land use over time; and the development of land-use modeling strategies.

Nellis, M. Duane↗

DOE OSTI2024

AquaPV: Regulatory and Environmental Considerations for Floating Photovoltaic Projects Located on Federally Controlled Reservoirs in the United States

To meet the nation's decarbonization goals, the U.S. Department of Energy's Solar Futures study forecasts that installed solar photovoltaic (PV) capacity must increase nearly tenfold, from 80 gigawatts (GW) in 2020 to approximately 760 GW cumulative installed capacity by 2035. Ground-mounted PV is expected to dominate future solar deployment and will require more than 3.5 million acres of land to meet annual demand projections (of nearly 45 GW) by 2030. However, various competing demands for land (e.g., agricultural production, conservation) and high land acquisition costs in specific locations could be challenges to meeting future PV demand solely with ground-mounted PV deployment. Floating photovoltaics (FPV) may be an alternative in locations where ground-mounted PV is not feasible and aid in reaching the nation's PV deployment and decarbonization goals. FPV is a newer siting approach in which a PV array is affixed to a floating apparatus and sited on a water body like a reservoir behind a dam. FPV systems may be stand-alone or co-located at new or existing hydroelectric facilities or pumped storage hydropower (PSH) facility reservoirs. Co-located FPV systems may or may not be operationally paired and work in tandem with the hydroelectric or PSH facility. This report provides novel analysis to understand the opportunities and challenges associated with developing stand-alone and co-located FPV projects on reservoirs in the United States. Specifically, the report explores potential environmental and energy benefits and environmental impacts associated with the siting, construction, and operation of FPV projects. The report also identifies and analyzes U.S. federal- and state-issued permits and authorizations required by federal laws to understand the licensing pathways and regulatory requirements for FPV projects sited on reservoirs licensed by the Federal Energy Regulatory Commission and on powered and non-powered reservoirs owned by the Bureau of Reclamation or U.S. Army Corps of Engineers.

ENERGY PLANNING, POLICY, AND ECONOMY,SOLAR ENERGY↗

DOE OSTI2024

AquaPV: Regulatory and Environmental Considerations for Floating Photovoltaic Projects Located on Federally Controlled Reservoirs in the United States

To meet the nation's decarbonization goals, the U.S. Department of Energy's Solar Futures study forecasts that installed solar photovoltaic (PV) capacity must increase nearly tenfold, from 80 gigawatts (GW) in 2020 to approximately 760 GW cumulative installed capacity by 2035. Ground-mounted PV is expected to dominate future solar deployment and will require more than 3.5 million acres of land to meet annual demand projections (of nearly 45 GW) by 2030. However, various competing demands for land (e.g., agricultural production, conservation) and high land acquisition costs in specific locations could be challenges to meeting future PV demand solely with ground-mounted PV deployment. Floating photovoltaics (FPV) may be an alternative in locations where ground-mounted PV is not feasible and aid in reaching the nation's PV deployment and decarbonization goals. FPV is a newer siting approach in which a PV array is affixed to a floating apparatus and sited on a water body like a reservoir behind a dam. FPV systems may be stand-alone or co-located at new or existing hydroelectric facilities or pumped storage hydropower (PSH) facility reservoirs. Co-located FPV systems may or may not be operationally paired and work in tandem with the hydroelectric or PSH facility. This report provides novel analysis to understand the opportunities and challenges associated with developing stand-alone and co-located FPV projects on reservoirs in the United States. Specifically, the report explores potential environmental and energy benefits and environmental impacts associated with the siting, construction, and operation of FPV projects. The report also identifies and analyzes U.S. federal- and state-issued permits and authorizations required by federal laws to understand the licensing pathways and regulatory requirements for FPV projects sited on reservoirs licensed by the Federal Energy Regulatory Commission and on powered and non-powered reservoirs owned by the Bureau of Reclamation or U.S. Army Corps of Engineers.

ENERGY PLANNING, POLICY, AND ECONOMY,SOLAR ENERGY↗

NASA NTRS2010

Exploiting the Free Landsat Archive for Operational Monitoring of Ecosystem Condition and Change Across the Chesapeake Bay Watershed

For the first time, all imagery acquired by the Landsat series of satellites is being made available by the USGS to users at no cost. This represents a key opportunity to use Landsat in a truly operational monitoring framework: large regions of the U.S. such as the Chesapeake Bay Watershed can now be analyzed using "wall-to-wall" imagery at timescales from approximately 1 month to several years. With the future launch of the Landsat Data Continuity Mission (LDCM) and Decadal Survey missions such as the hyperspectral HyspIRI, it is imperative to develop robust processing systems to perform annual ecosystem assessments over large regions such as the Chesapeake Bay. We have been working at NASA's Goddard Space Flight Center (GSFC) to develop an integrative framework for inserting 30m, annual, Landsat based data and derived products into the existing decision support system for the Bay, with a particular focus on ecosystem condition and changes over the entire watershed. The basic goal is to use a 'stack' of Landsat imagery with 40% or less cloud cover to produce multi-date (2005-2009 period), cloud/shadow/gap-free composited surface reflectance products that will support the creation of watershed scale land cover/ use products and the monitoring of ecosystem change across the Bay. Our scientific focus extends beyond the conventional definition of land cover (i.e. a classification of vegetation type) as we propose to monitor both changes in surface type (e.g. forest to urban), vegetation structure (e.g. forest disturbance due to logging or insect damage), as well as winter crop cover. These processes represent a continuum from large, interannual changes in land cover type, to subtler, intra-annual changes associated with short-term disturbance. The free Landsat data are being processed to surface reflectance and composited using the existing Landsat Ecosystem Disturbance Adaptive Processing System here at NASA/ GSFC, and land cover products (type, tree cover, impervious cover, winter cover) are being produced using well-established decision tree and regression tree algorithms. The goal of this session is to present the data products that we have been developing to the Bay science community and to discuss potential avenues for improvements and usage of the products for decision support.

BrowndeColstoun, Eric↗

NASA NTRS2019

Oxygen Production System for Refueling Human Landing System Elements

Current NASA plans for lunar exploration include a human lunar landing system, comprised of separate descent andascent modules, with the eventual goal of reusability. Different oxygen production processes were studied to evaluatethe feasibility of producing 10 tons of oxygen per year assuming a high latitude landing location. The study includesconsideration of packaging the ISRU components on the descent module, methods to transfer the regolith from theexcavators to the processing plant which may be mounted well above the lunar surface, and general concept ofoperations for excavation, oxygen production, and liquefaction and storage. A solar-based power system was alsodesigned and packaged on the lander, including the use of direct solar thermal energy where appropriate.

Linne, Diane↗

NASA NTRS2007

Immune Dysregulation Following Short versus Long Duration Space Flight

Immune system dysregulation has been demonstrated to occur during spaceflight and has the potential to cause serious health risks to crewmembers participating in exploration-class missions. A comprehensive immune assessment was recently performed on 13 short duration Space Shuttle crewmembers and 8 long duration International Space Station (ISS) crewmembers. Statistically significant post-flight phenotype alterations (as compared to pre-flight baseline) for the Shuttle crewmembers included: granulocytosis, increased percentage of B cells, reduced percentage of NK cells, elevated CD4/CD8 ratio, elevated levels of memory CD4+ T cells, and a CD8+ T cell shift to a less differentiated state. For the Shuttle crewmembers, T cell function was surprisingly elevated post-flight, among both the CD4+ and CD8+ subsets. This is likely an acute stress response in less-deconditioned crewmembers. The percentage of CD4+/IL-2+, CD4+/IFNg+ and CD8+/IFNg+ T cells were all decreased at landing. Culture secreted IFNg production was significantly decreased at landing, whereas production of Th2 cytokines was largely unchanged. It was found that the IFNg:IL-10 ratio was obviously declined in the Shuttle crewmembers immediately post-flight. A similar pattern of alterations were observed for the long duration ISS crewmembers. In contrast to Shuttle crewmembers, the ISS crewmembers demonstrated a dramatic reduction in T cell function immediately post-flight. This may be related to the effect of acute landing stress in conjunction with prolonged deconditioning associated with extended flight. The reduction in IFNg:IL-10 ratio (Th2 shift) was also observed post-flight in the ISS crewmembers to a much higher degree. These data indicate consistent peripheral phenotype changes and altered cytokine production profiles occur following space travel of both short and long duration.

Crucian, Brian E.↗

NASA NTRS2017

GEONEX: Land Monitoring From a New Generation of Geostationary Satellite Sensors

The latest generation of geostationary satellites carry sensors such as ABI (Advanced Baseline Imager on GOES-16) and the AHI (Advanced Himawari Imager on Himawari) that closely mimic the spatial and spectral characteristics of Earth Observing System flagship MODIS for monitoring land surface conditions. More importantly they provide observations at 5-15 minute intervals. Such high frequency data offer exciting possibilities for producing robust estimates of land surface conditions by overcoming cloud cover, enabling studies of diurnally varying local-to-regional biosphere-atmosphere interactions, and operational decision-making in agriculture, forestry and disaster management. But the data come with challenges that need special attention. For instance, geostationary data feature changing sun angle at constant view for each pixel, which is reciprocal to sun-synchronous observations, and thus require careful adaptation of EOS algorithms. Our goal is to produce a set of land surface products from geostationary sensors by leveraging NASA's investments in EOS algorithms and in the data/compute facility NEX. The land surface variables of interest include atmospherically corrected surface reflectances, snow cover, vegetation indices and leaf area index (LAI)/fraction of photosynthetically absorbed radiation (FPAR), as well as land surface temperature and fires. In order to get ready to produce operational products over the US from GOES-16 starting 2018, we have utilized 18 months of data from Himawari AHI over Australia to test the production pipeline and the performance of various algorithms for our initial tests. The end-to-end processing pipeline consists of a suite of modules to (a) perform calibration and automatic georeference correction of the AHI L1b data, (b) adopt the Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm to produce surface spectral reflectances along with compositing schemes and QA, and (c) modify relevant EOS retrieval algorithms (e.g., LAI and FPAR, GPP, etc.) for subsequent science product generation. Initial evaluation of Himawari AHI products against standard MODIS products indicate general agreement, suggesting that data from geostationary sensors can augment low earth orbit (LEO) satellite observations.

geostationary↗

NASA NTRS2002

Simulation of High-Latitude Hydrological Processes in the Torne-Kalix Basin: PILPS Phase 2(e): Equivalent Model Representation and Sensitivity Experiments - 3

The Project for Intercomparison of Land Surface Parameterization Schemes (PILPS) Phase 2(e) showed that in cold regions the annual runoff production in Land Surface Schemes (LSSs) is closely related to the maximum snow accumulation, which in turn is controlled in large part by winter sublimation. To help further explain the relationship between snow cover, turbulent exchanges and runoff production, a simple equivalent model-(SEM) was devised to reproduce the seasonal and annual fluxes simulated by 13 LSSs that participated in PILPS Phase 2(e). The design of the SEM relates the annual partitioning of precipitation and energy in the LSSs to three primary parameters: snow albedo, effective aerodynamic resistance and evaporation efficiency. Isolation of each of the parameters showed that the annual runoff production was most sensitive to the aerodynamic resistance. The SEM was somewhat successful in reproducing the observed LSS response to a decrease in shortwave radiation and changes in wind speed forcings. SEM parameters derived from the reduced shortwave forcings suggested that increased winter stability suppressed turbulent heat fluxes over snow. Because winter sensible heat fluxes were largely negative, reductions in winter shortwave radiation imply an increase in annual average sensible heat.

Bowling, Laura C.↗

DOE OSTI2021

Greenhouse production contributes to pesticide occurrences in Swedish streams

Greenhouse and other covered cultivation systems have increased globally over the past several decades, leading to considerably improved product quality and productivity per land area unit. However, there is a paucity in information regarding the environmental impacts of covered production systems, especially regarding pesticides entering the surrounding environment. Aiming to address this knowledge gap, we collected grab samples downstream of greenhouses from seven Swedish streams every 14 days during a 12 month period. In three of the streams, samples were also taken upstream of the greenhouses and in four of the streams time-integrated samples were collected by TIMFIE samplers in the period between grab sampling occasions. The samples were analyzed for 28 substances (27 that were permitted for use in greenhouse production systems in Sweden and one degradation product to a permitted substance). Pesticide use journals were collected from the greenhouse producers for the 12 month period. The results were examined for indications of greenhouse contributions to detection frequencies, maximum and average concentrations, and potential ecotoxicicity in several ways: (1) comparing locations downstream of greenhouses with registered use of a substance with those without registered use, (2) comparing results from this study with those from the Swedish environmental monitoring program of pesticides in surface water from catchments with no greenhouses from the same period and region, (3) comparing concentration trends with registered pesticide application times in the greenhouses, and (4) comparing up- and downstream concentrations. The results strongly suggest that greenhouse applications do contribute to pesticide occurrences, maximum and median concentrations for most of the pesticides included in this study, and to potential toxicity to aquatic organisms for several of them, most notably imidacloprid, acetamiprid, carbendazim, and pirimicarb.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRSDate not supplied

Climate Information and Lessons Learned from the NASA Earth eXchange (NEX), Short-term Prediction Research and Transition Center (NASA SPoRT), and the NASA Regional Climate Model Evaluation System (RCMES)

Climate resilience can emerge from a combination of (1) climate projections that enable future-oriented planning and (2) contemporary observations that can be used for adaptation in the face of realized climate. NASA is uniquely positioned to provide global climate projections and satellite-based observations to users who must take a global perspective on climate risk (e.g., supply chain managers). Here, we will share the capabilities and experiences of three NASA projects. The first project, the NASA Earth eXchange (NEX) provides two downscaled climate projections, NEX-GDDP-CMIP6, a global 25 km resolution product, and NEX-DCP30-CMIP6, an 800 m resolution product covering the coterminous U.S. specifically designed for U.S. National Climate Assessment (NCA). NEX also offers land surface products that mirror the twice-daily products provided by the Moderate Resolution Imaging Spectroradiometer (MODIS) but are derived from operational geostationary weather satellite data collected at 5-10 minutes intervals. The second project, the Short-term Prediction Research and Transition Center (SPoRT), was established in 2002 to transition unique NASA satellite products and capabilities to stakeholders to improve decision-making that benefits society. SPoRT provides products and capabilities derived from NASA observations and models to end users in government, academia, and the private sector. SPoRT translates NASA Earth science into actionable solutions reaching over 400 stakeholders across 80 organizations. Finally, the Regional Climate Model Evaluation System (RCMES) is designed to facilitate regional-scale evaluations of climate models by providing standardized access to a vast and comprehensive set of observations, such as satellite, in-situ, and reanalyses, and modeling resources such as CMIP & CORDEX. These three projects form part of the core capabilities at the NASA Centers deliver climate information under the new NASA Earth Science to Action (ES2A) strategy.

NEX↗

NASA NTRS2019

Performance of Landsat-8 and Sentinel-2 Surface Reflectance Products for River Remote Sensing Retrievals of Chlorophyll-A and Turbidity

Rivers and other freshwater systems play a crucial role in ecosystems, industry, transportation and agriculture. Despite the more than 40 years of inland water observations made possible by optical remote sensing, a standardized reflectance product for inland waters is yet forthcoming. The aim of this work is to compare the standard USGS land surface reflectance product to two Landsat-8 and Sentinel-2 aquatic remote sensing reflectance products over the Amazon, Columbia and Mississippi rivers. Landsat-8 reflectance products from all three routines are then evaluated for their comparative performance in retrieving chlorophyll-a and turbidity in reference to shipborne, underway in situ validation measurements. The land surface product shows the best agreement (4 percent Mean Absolute Percent Difference) with field measurements of radiometry collected on the Amazon River and generates 36 percent higher reflectance values in the visible bands compared to aquatic methods (ACOLITE (Atmospheric Correction for OLI (Operational Land Imager) 'lite') and SeaDAS (Sea-viewing Wide Field-of-View Sensor (SeaWiFS) Data Analysis System)) with larger differences between land and aquatic products observed in Sentinel-2 (0.01 per steraradian) compared to Landsat-8 (0.001 per steraradian). Choice of atmospheric correction routine can bias Landsat-8 retrievals of chlorophyll-a and turbidity by as much as 59 percent and 35 percent respectively. Using a more restrictive time window for matching in situ and satellite imagery can reduce differences by 5–31 percent depending on correction technique. This work highlights the challenges of satellite retrievals over rivers and underscores the need for future optical and biogeochemical research aimed at improving our understanding of the absorbing and scattering properties of river water and their relationships to remote sensing reflectance.

Landsat-8↗

DOE OSTI2023

Earth System Model Simulations of Ameriflux sites using dynamic roots and dynamic leaf to root allocation

This data package contains point-scale Earth System Model simulations run with DOE's E3SM Model. The package includes four sets of simulations, one set of simulations run in the default configuration, a second set of simulations run with the dynamic root module enabled, the third set with dynamic leaf to fine root allocation, and the fourth with the combination of dynamic roots and dynamic allocation. These simulations were run in point mode a Ameriflux sites, US-MMS, US-Moz, US-Syv, and US-NR1. These datasets can be used to assess the impact that dynamic roots have on Land Surface fluxes such as carbon and water. The simulations were run with atmospheric forcing from the Global Soil Wetness Project. We provide specifically here Gross Primary Production, Transpiration, relative root fraction per soil layer as well as Air Temperature, Precipitation and all the parameterizations used for the simulations. Our purpose for generating and analyzing these simulations was to assess the role that root dynamics and foraging for water has in the recovery timescale of ecosystems following climate perturbation. All data provided are in the "netcdf" format using standard CF-1 (Climate and Forecast) Convention. The data are all machine readable using various software platforms including Matlab, NCO, Panoply and R.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Dynamic integration of GCAM-Demeter and CLUBS-Select: Datasets on urban extensification effects on land cover, crop yields, net primary production, and CO2 emissions

The datasets provide background data from McManamay et al. (2024) Nature Communications Earth and Environment. We integrate projected dynamic non-urban lands from GCAM-Demeter with projected dynamic urban lands from SELECT from 2015 to 2100 at 1-km resolution to examine stress to the land system, compromised crop production, and losses in Net Primary Production (NPP), that can arise from the competition over land resources. These datasets include changes to non-urban land use and land cover, estimated losses in crop yields, losses in NPP, and increases in CO2 emissions.

Earth Systems↗

NASA NTRS1977

A procedure for merging land cover/use data from Landsat, aerial photography, and map sources - Compatibility, accuracy and cost

A method is developed to merge land cover/use data from Landsat, aerial photography and map sources into a grid-based geographic information system. The method basically involves computer-assisted categorization of Landsat data to provide certain user-specified land cover categories; manual interpretation of aerial photography to identify other selected land cover/use categories that cannot be obtained from Landsat data; identification of special features from aerial photography or map sources; merging of the interpreted data from all the sources into a computer compatible file under a standardized coding structure; and the production of land cover/use maps, thematic maps, and tabular data. The specific tasks accomplished in producing the merged land cover/use data file and subsequent output products are identified and discussed. It is shown that effective implementation of the merging method is critically dependent on selecting the 'best' data source for each user-specified category in terms of accuracy and time/cost tradeoffs.

Enslin, W. R.↗