Application of Human Transfer Functions to a Design Problem
Manually controlled lunar landing simulator with transfer functions for pilot control response
Adams, J. J.↗
SEARCH · Search NASA
Results for “land simulation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Fixed-base visual simulation of pilot controlled descents of an advanced Apollo spacecraft with an all-flexible parawing
Optical simulation landing system for evaluating pilot controlled flexible parawing and Apollo capsule combination performance during landing
Jaquet, B. M.↗
Application of human transfer functions to system analysis
Human transfer functions applied in systems analysis of manually controlled lunar landing simulator
Adams, J. J.↗
Effects of an in-flight thrust reverser on the stability and control characteristics of a single-engine fighter airplane model
The changes in thrust minus drag performance as well as longitudinal and directional stability and control characteristics of a single-engine jet aircraft attributable to an in-flight thrust reverser of the blocker-deflector door type were investigated in a 16-foot transonic wind tunnel. The longitudinal and directional stability data are presented. Test conditions simulated landing approach conditions as well as high speed maneuvering such as may be required for combat or steep descent from high altitude.
Mercer, C. E.↗
Flight director design for a STOL aircraft.
The study described here was intended to explore some ways of giving the pilot the information necessary to perform as well as an autopilot. A fixed-base flight simulator was built to study pilot/director/aircraft performance. Instrument rated pilots used the different director-displays in an approach down to touchdown, including a flare and decrab maneuver. Two well established areas of control theory are combined in the design of the cockpit display. Optimal control theory and the theory of manual control are used to find the feedback gains required to drive the display symbols. Conclusions based on the simulator are presented. The results show that the director display developed in the work provides more than adequate information for simulated landing in highly turbulent conditions.
Seitz, W. R.↗
Analysis of a flare-director concept for an externally blown flap STOL aircraft
A flare-director concept involving a thrust-required flare-guidance equation was developed and tested on a moving-base simulator. The equation gives a signal to command thrust as a linear function of the errors between the variables thrust, altitude, and altitude rate and corresponding values on a desired reference flare trajectory. During the simulator landing tests this signal drove either the horizontal command bar of the aircraft's flight director or a thrust-command dot on a head-up virtual-image display of a flare director. It was also used as the input to a simple autoflare system. An externally blown flap STOL (short take-off and landing) aircraft (with considerable stability and control augmentation) was modeled for the landing tests. The pilots considered the flare director a valuable guide for executing a proper flare-thrust program under instrument-landing conditions, but were reluctant to make any use of the head-up display when they were performing the landings visually.
Middleton, D. B.↗
A motion-constraint logic for moving-base simulators based on variable filter parameters
A motion-constraint logic for moving-base simulators has been developed that is a modification to the linear second-order filters generally employed in conventional constraints. In the modified constraint logic, the filter parameters are not constant but vary with the instantaneous motion-base position to increase the constraint as the system approaches the positional limits. With the modified constraint logic, accelerations larger than originally expected are limited while conventional linear filters would result in automatic shutdown of the motion base. In addition, the modified washout logic has frequency-response characteristics that are an improvement over conventional linear filters with braking for low-frequency pilot inputs. During simulated landing approaches of an externally blown flap short take-off and landing (STOL) transport using decoupled longitudinal controls, the pilots were unable to detect much difference between the modified constraint logic and the logic based on linear filters with braking.
Miller, G. K., Jr.↗
Vibration responses of test structure no. 1 during the Edwards Air Force Base phase of the national sonic boom program
In order to evaluate reaction of people to sonic booms of varying overpressures and time durations, a series of closely controlled and systematic flight test studies were conducted in the vicinity of Edwards AFB, California, from June 3 to June 23, 1966. The dynamic responses of several building structures were measured as a part of these studies, and the measurements made in a one-story residence structure (Edwards test structure No. 1) are presented. Sample acceleration and strain recordings are presented from F-104, B-58, and XB-70 sonic-boom exposures, along with tabulations of the maximum acceleration and strain values measured for each one of about 140 flight tests. These data are compared with similar measurements for engine noise exposures of the building during simulated landing approaches and takeoffs of KC-135 aircraft.
Findley, D. S.↗
Vibration Responses of Test Structure No. 2 During the Edward Air Force Base Phase of the National Sonic Boom Program
In order to evaluate reaction of people to sonic booms of varying overpressures and time durations, a series of closely controlled and systematic flight tests/studies were conducted from June 3 to June 23, 1966. The dynamic responses of several building structures were measured, with emphasis on a two-story residence structure. Sample acceleration and strain recordings from F-104, B-58, and XB-70 sonic boom exposures are included, along with tabulations of the maximum acceleration and strain values measured for each one of about 140 flight tests. These data are compared with similar measurements for engine noise exposures of the building during simulated landing approaches and takeoffs of KC-135 aircraft.
Findley, D. S.↗
Wind shear effects on landing touchdown point
In the study reported, an investigation was conducted concerning the shape of wind shear profiles during aircraft landings, taking into account also the values of the meteorological parameters which describe the wind shears. Attention is also given to the variation of wind shear effects in the case of different aircraft types. The study was conducted for commercial, military, and STOL aircraft. A digital landing simulation model was used in the investigations.
Luers, J. K.↗
Studies of friction and wear characteristics of various wires for wire-brush skids
The friction and wear characteristics of 22 types and sizes of wires for potential use in wire-brush skids were studied. These characteristics were determined by placing brushes made from candidate wires on a belt sander whose moving belt simulated landing roll-out distance. At the same time, the drag force and wear behavior were monitored. Data were obtained over distances up to 3048 m (10,000 ft) at preselected bearing pressures of 172 to 1034 kPa (25 to 150 psi). In general, the friction coefficient developed by the candidate wires was found to be independent of bearing pressure and ranged between 0.4 and 0.6 under the test conditions of this investigation. The friction coefficient was not degraded when the surface was wetted and appears to be independent of wire diameter except perhaps when wire size is relatively large compared with the surface asperities. Generally, the high friction demonstrated by the soft materials was accompanied by high wear rates; conversely, the hard materials provided greater wear resistance but offered lower friction. For all test wires, the wear was shown to increase with increasing bearing pressure, in general, for the same bearing pressure, wear increased with increasing wire diameter and decreased when the surface was wetted.
Dreher, R. C.↗
The effect of heavy rain on windshear attributed accidents
In recent years several commercial aircraft accidents have occurred as an aircraft attempted landing in a thunderstorm cell. The horizontal and vertical windshear associated with the cell have been identified as the factors responsible for the accident. In addition to the wind shear encounter, several of these aircraft simultaneously penetrated a heavy rain cell. Heavy rain affects the aircraft by imparting a momentum penalty, and a drag penalty, due to the rain roughening of the airfoil. These penalties have been evaluated by a computer model that, when incorporated with a landing simulation program, was used to assess the relative influence of heavy rain versus wind shear. Using this model, an assessment was made of the influence of heavy rain on several wind shear attributed accidents.
Luers, J. K.↗
Downbursts and microbursts - An aviation hazard
Downburst and microburst phenomena occurring since 1975 are studied, based on meteorological analyses of aircraft accidents, aerial surveys of wind effects left behind downbursts, and studies of sub-mesoscale wind systems. It is concluded that microbursts beneath small, air mass thunderstorms are unpredictable in terms of weather forecast. Most aircraft incidents, however, were found to have occurred in the summer months, June through August. An intense microburst could produce 150 mph horizontal winds as well as 60 fps downflows at the tree-top level. The largest contributing factor to aircraft difficulties seemed to be a combination of the headwind decrease and the downflow. Anemometers and/or pressure sensors placed near runways were found effective for detecting gust fronts, but not for detecting downbursts. It is recommended that new detection systems placed on the ground or airborne, be developed, and that pilots be trained for simulated landing and go-around through microbursts.
Fujita, T. T.↗
Vibration responses of two house structures during the Edwards Air Force Base phase of the national sonic boom program
The data are reproduced from NSBEO-1-67, which contains some preliminary results of the test program, and from NASA-Langley working papers 259 and 288 which are now out of print. Included are sample acceleration and strain recordings from F-104, B-58, and XB-70 sonic boom exposures, along with tabulations of the maximum acceleration and strain values measured for each one of about 130 flight tests. These data are compared with similar measurements for engine noise exposures of the building during simulated landing approaches and takeoffs of KC-135 aircraft.
Hubbard, Harvey H.↗
An experimental study to improve Space Shuttle approach and landing performance
Experiments have been conducted by engineers at NASA's Lyndon B. Johnson Space Center to study the effects of modifications to the base area of the Space Shuttle Orbiter on approach and landing performance. A candidate configuration, the 'OMS plate', has been chosen for further study based on wind tunnel test results. This modification consists of a curved plate which extends the length of the upper portion of the Orbiter base. The addition of this plate reduces Orbiter base drag by up to 16 percent and has positive effects on performance. An aerodynamic model including the effects of these modifications has been produced for use in Space Shuttle landing simulations.
Meyerson, Robert E.↗
Controlling crippled aircraft-with throttles
A multiengine crippled aircraft, with most or all of the flight control system inoperative, may use engine thrust for control. A study was conducted of the capability and techniques for emergency flight control. Included were light twin engine piston powered airplanes, an executive jet transport, commercial jet transports, and a high performance fighter. Piloted simulations of the B-720, B-747, B-727, MD-11, C-402, and F-15 airplanes were studied, and the Lear 24, PA-30, and F-15 airplanes were flight tested. All aircraft showed some control capability with throttles and could be kept under control in up-and-away flight for an extended period of time. Using piloted simulators, landings with manual throttles-only control were extremely difficult. However, there are techniques that improve the chances of making a survivable landing. In addition, augmented control systems provide major improvements in control capability and make repeatable landings possible. Control capabilities and techniques are discussed.
Burcham, Frank W., Jr.↗
Effect on real-world depth perception from exposure to heads-down stereoscopic flight displays
A stereoacuity test was used as part of the experimental protocol of a study in which eight transport pilots flew repeated simulated landing approaches using both stereo and nonstereo three-dimensional heads-down 'pathway in the sky' displays. At the decisionmaking crux of each approach, the pilots transitioned to a stereoacuity test employing real objects rather than a two-dimensional target apparatus. A statistical analysis of stereoacuity measures which compared a controlled condition of no exposure to any electronic flight display with the transition data from nonstereo and stereopsis displays indicated no significant differences for any of the conditions.
Busquets, Anthony M.↗
Effect of short-term exposure to stereoscopic three-dimensional flight displays on real-world depth perception
High-fidelity color pictorial displays that incorporate depth cues in the display elements are currently available. Depth cuing applied to advanced head-down flight display concepts potentially enhances the pilot's situational awareness and improves task performance. Depth cues provided by stereopsis exhibit constraints that must be fully understood so depth cuing enhancements can be adequately realized and exploited. A fundamental issue (the goal of this investigation) is whether the use of head-down stereoscopic displays in flight applications degrade the real-world depth perception of pilots using such displays. Stereoacuity tests are used in this study as the measure of interest. Eight pilots flew repeated simulated landing approaches using both nonstereo and stereo 3-D head-down pathway-in-the-sky displays. At this decision height of each approach (where the pilot changes to an out-the-window view to obtain real-world visual references) the pilots changed to a stereoacuity test that used real objects. Statistical analysis of stereoacuity measures (data for a control condition of no exposure to any electronic flight display compared with data for changes from nonstereo and from stereo displays) reveals no significant differences for any of the conditions. Therefore, changing from short-term exposure to a head-down stereo display has no more effect on real-world relative depth perception than does changing from a nonstereo display. However, depth perception effects based on sized and distance judgements and on long-term exposure remain issues to be investigated.
Busquets, Anthony M.↗