Search NASA⌕ Search

SEARCH · Search NASA

Results for “laser damage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Birefringent Glass‐Engraved Tilted Pillar Metasurfaces for High Power Laser Applications

Abstract Birefringent materials—which are highly needed in high power laser systems—may be limited in usage due to the laser‐induced damage threshold of traditional birefringent materials. This work reports here on all‐glass metasurfaces, fabricated by angled etching through sacrificial metal nanoparticle (NP) etching masks, for generation of effective birefringence in the formed layer. As a result, a fused silica metasurface, monolithic to the underlying substrate, is demonstrated to exhibit a birefringence of 6.57° under 375 nm illumination. Full‐wave analysis shows a good agreement with the measurement and presents potential paths forward to increasing the effective metasurface birefringence. This is the first demonstration, to the best of knowledge, of an etching technique to obtain the resulting tilted pillar‐like nanofeatures. The anisotropy of the metasurface nanoelements along the two window in‐plane major axes presents different effective paths for the two polarizations and thus generates birefringence in a nonbirefringent material. Additionally, the imparted anisotropy lends itself to manipulation of physical properties of the surface as well, with metasurface feature orientation suppressing water flow along one principal axis and giving rise to water flow steering capabilities.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Non‐Linear Optical Properties of the ( RE ) 3 CuGeS 7 Family of Compounds

Abstract Non‐linear optical materials must possess a balanced combination of laser‐induced damage threshold (LDT) and second‐harmonic generation (SHG) and be phase matchable. In our previous work, chiral and polar La 3 CuGeS 7 was identified as a promising non‐linear optical material. Herein, we report the optimization of non‐linear optical properties through replacement of La with smaller lanthanides. It is determined that Gd 3 CuGeS 7 exhibits the best combination of SHG (1.6× AgGaS 2 at 88–105 μm particle size) and LDT (3× AgGaS 2 , 89 MW/cm 2 ) and is phase matchable. Based on changes in metal‐sulfur bond lengths and angles, we further propose structural optimization through solid‐solution formation and doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structure Tuning, Strong Second Harmonic Generation Response, and High Optical Stability of the Polar Semiconductors Na 1- x K x AsQ 2

We report the mixed cation compounds Na 1-x K x AsSe 2 (x = 0.8, 0.65, 0.5) and Na 0.1 K 0.9 AsS 2 crystallize in the polar noncentrosymmetric space group Cc. The AAsQ(2) (A = alkali metals, Q = S, Se) family features one-dimensional (1D) 1 / ∞ [AQ 2 - ] chains comprising corner-sharing pyramidal AQ 3 units in which the packing of these chains is dependent on the alkali metals. The parallel 1 / ∞ [AQ(2) - ] chains interact via short As ∙∙∙Se contacts, which increase in length when the fraction of K atoms is increased. The increase in the As ∙∙∙Se interchain distance increases the band gap from 1.75 eV in γ-NaAsSe 2 to 2.01 eV in Na 0.35 K 0.65 AsSe 2 , 2.07 eV in Na 0.2 K 0.8 AsSe 2 , and 2.18 eV in Na 0.1 K 0.9 AsS 2 . The Na 1-x K x AsSe 2 (x = 0.8, 0.65) compounds melt congruently at approximately 316 °C. Wavelength-dependent second harmonic generation (SHG) measurements on powder samples of Na 1-x K x AsSe 2 (x = 0.8, 0.65, 0.5) and Na 0.1 K 0.9 AsS 2 suggest that Na 0.2 K 0.8 AsSe 2 and Na 0.1 K 0.9 AsS 2 have the highest SHG response and exhibit significantly higher laser-induced damage thresholds (LIDTs). Theoretical SHG calculations on Na 0.5 K 0.5 AsSe 2 confirm its SHG response with the highest value of d 33 = 22.5 pm/V χ 333 (2) = 45.0 pm/V). The effective nonlinearity for a randomly oriented powder is calculated to be d eff = 18.9 pm/V χ eff (2) = 37.8 pm/V), which is consistent with the experimentally obtained value of d eff = 16.5 pm/V χ eff (2) = 33.0 pm/V). Three-photon absorption is the dominant mechanism for the optical breakdown of the compounds under intense excitation at 1580 nm, with Na 0.2 K 0.8 AsSe 2 exhibiting the highest stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Heteroanionic Control of Exemplary Second-Harmonic Generation and Phase Matchability in 1D LiAsS 2– x Se x

The isostructural heteroanionic compounds β-LiAsS 2–x Se x (x = 0, 0.25, 1, 1.75, 2) show a positive correlation between selenium content and second-harmonic response and greatly outperform the industry standard AgGaSe 2 . These materials crystallize in the noncentrosymmetric space group Cc as one-dimensional $\frac{1}{∞}$ [AsQ 2 ] - (Q = S, Se, S/Se) chains consisting of corner-sharing AsQ3 trigonal pyramids with charge-balancing Li + atoms interspersed between the chains. LiAsS 2–x Se x melts congruently for 0 ≤ x ≤ 1.75, but when the Se content exceeds x = 1.75, crystallization is complicated by a phase transition. This behavior is attributed to the β- to α-phase transition present in LiAsSe 2 , which is observed in the Se-rich compositions. The band gap decreases with increasing Se content, starting at 1.63 eV (LiAsS 2 ) and reaching 1.06 eV (β-LiAsSe 2 ). Second-harmonic generation measurements as a function of wavelength on powder samples of β-LiAsS 2–x Se x show that these materials exhibit significantly higher nonlinearity than AgGaSe 2 (d 36 = 33 pm/V), reaching a maximum of 61.2 pm/V for LiAsS 2 . In comparison, single-crystal measurements for LiAsSSe yielded a d eff = 410 pm/V. LiAsSSe, LiAsS 0.25 Se 1.75 , and β-LiAsSe 2 show phase-matching behavior for incident wavelengths exceeding 3 μm. The laser-induced damage thresholds from two-photon absorption processes are on the same order of magnitude as AgGaSe 2 , with S-rich materials slightly outperforming AgGaSe 2 and Se-rich materials slightly underperforming AgGaSe 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Large second harmonic generation in a penta-CdO 2 sheet exfoliated from its bulk phase

Two-dimensional (2D) materials composed solely of pentagonal motifs are of particular interest due to their unique geometries and novel properties. Especially, the broken centrosymmetry and in-plane mirror symmetry in penta-graphene-like materials result in both in-plane and out-of-plane second harmonic generation (SHG). Transition metal cations with a filled d 10 shell (d 10 -TM) can significantly enhance the SHG response as found in many previously studied bulk materials. Here, in this study, based on first-principles calculations combined with independent particle approximation, we show that large SHG can also exist in some 2D d 10 -TM oxides, such as penta-CdO 2 , which can be chemically exfoliated from its bulk phase with its dynamical, thermal, and mechanical stability intact. We further find that penta-CdO 2 possesses extraordinary in-plane and out-of-plane SHG responses with large static SHG susceptibilities of χ sheet 14 (0) = χ sheet 25 (0) = χ sheet 36 (0) = 8.86 pm 2 V -1 due to the phase-matching between fundamental and second-harmonic light. In addition, the low thermal expansion and a large optical band gap of 3.24 eV endow the penta-CdO 2 sheet with a high laser-induced damage threshold. Discussions are also made on the penta-ZnO 2 sheet. This study expands the family of 2D materials with outstanding SHG performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Identification of contamination in the pulse-compression chamber of the OMEGA EP Laser System originating from clean room garments

The contamination of optical components with microscopic particles strongly impacts their ability to handle high-power or high-intensity laser pulses via an array of mechanisms. This work explores the nature and origin of a subset of contamination particles found inside the pulse-compression chamber of the OMEGA EP Laser System. Using Raman microscopy accompanied by other analytical methods, it was shown that sodium nitrate constitutes a significant fraction of the particles that possess diameters on the order of a few micrometers. Further investigation aiming to reveal the origin of these particles suggests that these sodium nitrate particles are deposited via shedding from the reusable clean room garments worn in the Laser Bay and compression chamber. Raman microscopy also revealed various plastic particles such as polystyrene, polyethylene, and poly(diallyl isophthalate).

Raman spectroscopy↗
DOE OSTI2021

Electric-field enhancement caused by subwavelength-sized particles located on the surface of multilayer dielectric mirrors

A laser pulse impinging on the surface of an optical component can interact with particles, such as contamination debris, to produce a scattered electric field, which, either by itself or combined with the incident laser field, coherently can significantly increase the local field intensity. This effect can be of critical importance as it can reduce the laser-induced–damage threshold of the affected component. In this work, we use a field-propagation code to improve understanding regarding the factors that determine the magnitude and location of the electric-field enhancement for the case of subwavelength-sized particles located on the surface of multilayer dielectric mirrors.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Design of an optical amplifier for amplified OSC in IOTA facility at Fermilab

Optical stochastic cooling (OSC) is a cutting-edge beam cooling technology to reduce, control the 3 dimensional spread and the motion of particle beams. It has recently been successfully, experimentally, demonstrated in Fermilab's IOTA storage ring, marking a major step forward in beam cooling. OSC has the potential to significantly improve both the performance and flexibility as a beam cooling system. One promising way to boost OSC performance is by adding a high-gain optical amplifier. However, this amplifier must be carefully designed to meet the specific constraints of the OSC system. A major challenge lies in the limited optical delay, which is just 6 mm for the case of IOTA, set by the beam bypass, restricts us to use a short-length gain medium. This, along with IOTA’s high repetition rate and the relatively long duration of the optical pulses, limits the peak power available for the pump laser without damaging the crystal, which is crucial for achieving strong nonlinear gain. Additionally, it's essential to preserve the phase coherence of the undulator radiation during amplification, which further complicates the amplifier design. This report details a specialized amplifier setup that addresses these challenges, includes simulations of the integrated system, and summarizes the latest experimental progress and results.

Mondal, Abhishek [Fermilab]↗
NASA NTRS1982

Precipitating Chromium Impurities in Silicon Wafers

Two new treatments for silicon wafers improve solar-cell conversion efficiency by precipitating electrically-active chromium impurities. One method is simple heat treatment. Other involves laser-induced damage followed by similar heat treatment. Chromium is one impurity of concern in metallurgical-grade silicon for solar cells. In new treatment, chromium active centers are made electrically inactive by precipitating chromium from solid solution, enabling use of lower grade, lower cost silicon in cell manufacture.

Salama, A. M.↗
NASA NTRS1987

High power lasers: Sources, laser-material interactions, high excitations, and fast dynamics in laser processing and industrial applications; Proceedings of the Meeting, The Hague, Netherlands, Mar. 31-Apr. 3, 1987

The design and operation of high-power lasers for industrial applications are discussed in reviews and reports. Topics addressed include the status of optical technology in the Netherlands, laser design, the deposition of optical energy, laser diagnostics, nonmetal processing, and energy coupling and plasma formation. Consideration is given to laser-induced damage to materials, fluid and gas flow dynamics, metal processing, and manufacturing. Graphs, diagrams, micrographs, and photographs are provided.

Kreutz, E. W.↗
NASA NTRS2004

Effect of Surface Impulsive Thermal Loads on Fatigue Behavior of Constant Volume Propulsion Engine Combustor Materials

The development of advanced high performance constant-volume-combustion-cycle engines (CVCCE) requires robust design of the engine components that are capable of enduring harsh combustion environments under high frequency thermal and mechanical fatigue conditions. In this study, a simulated engine test rig has been established to evaluate thermal fatigue behavior of a candidate engine combustor material, Haynes 188, under superimposed CO2 laser surface impulsive thermal loads (30 to 100 Hz) in conjunction with the mechanical fatigue loads (10 Hz). The mechanical high cycle fatigue (HCF) testing of some laser pre-exposed specimens has also been conducted under a frequency of 100 Hz to determine the laser surface damage effect. The test results have indicated that material surface oxidation and creep-enhanced fatigue is an important mechanism for the surface crack initiation and propagation under the simulated CVCCE engine conditions.

Zhu, Dongming↗
NASA NTRS2002

Laser Photon Force Measurements using a CW Laser

The photon force resulting from the non-damaging impact of laser derived photons on a metallic target was measured using a vacuum compatible microbalance. This experiment quantitatively verified that the force resulting from laser photons impacting a reflective surface is measurable and predictable. The photon wavelength is 1064 mn and the laser is a multi-mode 30OW Nd YAG continuous wave (CW) laser.

Gray, Perry↗
NASA NTRS1980

Annealing radiation damaged silicon solar cells with a copper halide laser

The use of a multiply pulsed copper halide laser to significantly anneal out the damage to silicon solar cells caused by a simulated space radiation environment is investigated. Preliminary experiments demonstrate that the amount of damage can be decreased by 41% as measured by the maximum power generated.

Pivirotto, T. J.↗
DOE OSTI2020

Jitter-induced Max-of-N fluence distribution at the National Ignition Facility

Max-of-N fluence is the maximum peak fluence at a given location over N number of shots and is important for calculating fluence dependence for intrinsic laser-induced optic damage. Previously, we observed the Max-of-N effect on the National Ignition Facility and developed an ad-hoc model to calculate its effect. In this work, we attempt to understand the fundamental mechanism that causes this Max-of-N effect. We conclude that the primary fundamental mechanism responsible for this effect is dominated by the combination of fluence variations and pointing jitter of the laser. This discovery both strengthens our model for predicting optics longevity and gives us insight into how to mitigate this effect.

42 ENGINEERING↗
NASA NTRS1991

Narrowband alexandrite laser injection seeded with frequency dithered diode laser

Narrowband radiation is produced from a pulsed alexandrite laser when injection seeded with the output of a low power, tunable, continuous wave single mode diode laser. Injection seeded power oscillators are easier to frequency stabilize than etalon narrowed lasers, are more efficient and less prone to optical damage. AlGaAs diode lasers are available with wavelengths from 760 to 770 nm in the oxygen A band that can be used for differential absorption lidar remote sensing of atmospheric pressure and temperature. Diodes with room temperature output at 740 nm may be cooled sufficiently to emit in the water vapor absorption band at 720-730 nm for humidity remote sensing. The diode laser linewidth of 200 MHz is sufficient to seed 2 or 3 longitudinal modes of the multi-transverse mode alexandrite laser, giving the pulsed laser a bandwidth of 0.007 to 0.014/cm.

Schwemmer, Geary↗
DOE OSTI2024

On the Nature of Recoater Damage Powder Spreading Mechanics

Laser powder bed fusion (PBF-LB) additive manufacturing gained popularity for the creation of high mix, low volume parts for defense and commercial applications. Parts made via PBF-LB can be difficult to qualify due to their variation in performance, even within the same build. During the build process, regions of the PBF-LB recoater blade could be subject to damage by spatter or superelevation in the powder bed. As a result, the worn recoater can potentially cause spreading defects in the localized topography profile, which could in turn cause porosity or form deviations. These process concerns are not well understood for their criticality and subsequent impact on part quality. This study will investigate the mechanics of recoater damage through two experimental builds. Post-mortem inspection of the failure region will be conducted with laser line profilometry and will help propose a better understanding of the criticality of extreme recoater damage.

In-Situ Monitoring↗
DOE OSTI2022

Ionization-Based Optical Structures for the Control of Short-Pulse Lasers (Abbreviated LDRD Report)

The intensity of light from the highest-power lasers is limited by the size of the optics required to amplify, compress, transport, and focus a laser beam. Indeed, optics damage puts strict constraints on the laser energy density that solid optics can sustain; this leads to enormous optics sizes and limits the maximum intensity that these lasers can achieve. In this project we investigated new types of diffractive optics based on mixtures of neutral gas and plasmas. The basic idea is to interfere laser beams in a gas near the ionization threshold, so that plasma is created in the constructive interference regions (i.e., the “bright” fringes of the interference pattern) while the destructive interference regions remain a neutral gas. The resulting refractive index modulation, due to the different indices in gas vs. plasma, effectively turns such structures into diffractive optics elements. We proposed several new types of optics based on this general concept: i) reflection gratings, which can act as mirrors of “pulse cleaners” to eliminate laser pre-pulse; ii) transmission gratings, as part of a new type of pulse compression scheme with the potential to achieve laser intensities orders of magnitude above what is currently feasible using solid-state optics; and iii) holographic lenses, to focus high-power lasers. We conducted laboratory experiments which demonstrated high efficiency reflection gratings, paving the way for practical applications of our new concepts.

47 OTHER INSTRUMENTATION↗