Search NASA⌕ Search

SEARCH · Search NASA

Results for “lasing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Coherence Phenomena in Coupled Optical Resonators

Quantum coherence effects in atomic media such as electromagnetically-induced transparency and absorption, lasing without inversion, super-radiance and gain-assisted superluminality have become well-known in atomic physics. But these effects are not unique to atoms, nor are they uniquely quantum in nature, but rather are fundamental to systems of coherently coupled oscillators. In this talk I will review a variety of analogous photonic coherence phenomena that can occur in passive and active coupled optical resonators. Specifically, I will examine the evolution of the response that can occur upon the addition of a second resonator, to a single resonator that is side-coupled to a waveguide, as the coupling is increased, and discuss the conditions for slow and fast light propagation, coupled-resonator-induced transparency and absorption, lasing without gain, and gain-assisted superluminal pulse propagation. Finally, I will discuss the application of these systems to laser stabilization and gyroscopy.

Smith, David D.↗
NASA NTRS2007

Surface-Emitting Distributed Feedback Terahertz Quantum-Cascade Lasers in Metal-Metal Waveguides

Single-mode surface-emitting distributed feedback terahertz quantumcascade lasers operating around 2.9 THz are developed in metal-metal waveguides. A combination of techniques including precise control of phase of reflection at the facets, and u e of metal on the sidewalls to eliminate higher-order lateral modes allow robust single-mode operation over a range of approximately 0.35 THz. Single-lobed far-field radiation pattern is obtained using a pi phase-shift in center of the second-order Bragg grating. A grating device operating at 2.93 THz lased up to 149 K in pulsed mode and a temperature tuning of 19 .7 GHz was observed from 5 K to 147 K. The same device lased up to 78 K in continuous-wave (cw) mode emitting more than 6 m W of cw power at 5 K. ln general, maximum temperature of pulsed operation for grating devices was within a few Kelvin of that of multi-mode Fabry-Perot ridge lasers

Kumar, Sushil↗
NASA NTRS2010

Lasers and the Dynamic Mesosphere/Thermosphere of Venus

A review of ground based mid-infrared uniquely high spectral. resolution measurements of Venus dynamics, temperature, and chemistry will be presented. The described studies will focus on the use of CO2 absorption features and the discovery- and use of CO2 thermospheric non-thermal emission: lines as probes of Venus' atmosphere, from the cloud tops to approx.120 km in the thermosphere. The first investigations using infrared heterodyne spectroscopy with resolving power lambda/Delta(lambda) approx. 10(exp 6) to measure true emission line profiles and to determine their non-thermal nature and lasing component will be described. The use of the thermospheric non-thermal CO2 emission to directly measure sub-solar to anti-solar winds and zonal circulation near 110 km altitudes on Venus to approx.2 m/s accuracy will also be described. The measured emission lures are also used to obtain global maps of mesospheric/thermospheric kinetic and rotational temperatures as well as to obtain evidence of the natural lasing phenomena. Carbon dioxide absorption features globally probe lower altitudes in the atmosphere and can be used to determine nightside temperatures. Isotopic 13 CO2 absorption lines are used to probe deeper in the atmosphere to measure the sub-solar to anti-solar return flow at altitudes just above the cloud tops. These results provided a model for global circulation in the 65 - 120 km altitude region first proposed by Goldstein (1989, PhD.Thesis, U. Pennsylvania, Philadelphia, USA). Results of similar wind and temperature measurements made in recent years will be compared to earlier results to investigate changes in the circulation and temperatures since approx.1990. The high resolution infrared heterodyne technique was also used to investigate chemical processes above the cloud tops, specifically evidence and constraints on oxygen-based chemistry. Described measurements were made by infrared heterodyne spectroscopy using the Goddard Space Flight Center Infrared Heterodyne Spectrometer (IRHS) the GSFC Heterodyne Instrument for Planetary wind And Composition (HIPWAC) and the University of Cologne Tuneable Heterodyne Infrared Spectrometer (THIS).

Kostiuk, Theodor↗
NASA NTRS2005

Adding GaAs Monolayers to InAs Quantum-Dot Lasers on (001) InP

In a modification of the basic configuration of InAs quantum-dot semiconductor lasers on (001)lnP substrate, a thin layer (typically 1 to 2 monolayer thick) of GaAs is incorporated into the active region. This modification enhances laser performance: In particular, whereas it has been necessary to cool the unmodified devices to temperatures of about 80 K in order to obtain lasing at long wavelengths, the modified devices can lase at wavelengths of about 1.7 microns or more near room temperature. InAs quantum dots self-assemble, as a consequence of the lattice mismatch, during epitaxial deposition of InAs on ln0.53Ga0.47As/lnP. In the unmodified devices, the quantum dots as thus formed are typically nonuniform in size. Strainenergy relaxation in very large quantum dots can lead to poor laser performance, especially at wavelengths near 2 microns, for which large quantum dots are needed. In the modified devices, the thin layers of GaAs added to the active regions constitute potential-energy barriers that electrons can only penetrate by quantum tunneling and thus reduce the hot carrier effects. Also, the insertion of thin GaAs layer is shown to reduce the degree of nonuniformity of sizes of the quantum dots. In the fabrication of a batch of modified InAs quantum-dot lasers, the thin additional layer of GaAs is deposited as an interfacial layer in an InGaAs quantum well on (001) InP substrate. The device as described thus far is sandwiched between InGaAsPy waveguide layers, then further sandwiched between InP cladding layers, then further sandwiched between heavily Zn-doped (p-type) InGaAs contact layer.

Qiu, Yueming↗
NASA NTRS2005

Measuring Two Key Parameters of H3 Color Centers in Diamond

A method of measuring two key parameters of H3 color centers in diamond has been created as part of a continuing effort to develop tunable, continuous-wave, visible lasers that would utilize diamond as the lasing medium. (An H3 color center in a diamond crystal lattice comprises two nitrogen atoms substituted for two carbon atoms bonded to a third carbon atom. H3 color centers can be induced artificially; they also occur naturally. If present in sufficient density, they impart a yellow hue.) The method may also be applicable to the corresponding parameters of other candidate lasing media. One of the parameters is the number density of color centers, which is needed for designing an efficient laser. The other parameter is an optical-absorption cross section, which, as explained below, is needed for determining the number density. The present method represents an improvement over prior methods in which optical-absorption measurements have been used to determine absorption cross sections or number densities. Heretofore, in order to determine a number density from such measurements, it has been necessary to know the applicable absorption cross section; alternatively, to determine the absorption cross section from such measurements, it has been necessary to know the number density. If, as in this case, both the number density and the absorption cross section are initially unknown, then it is impossible to determine either parameter in the absence of additional information.

Roberts, W. Thomas↗
NASA NTRS2012

Forward voltage short-pulse technique for measuring high power laser array junction temperature

The present invention relates to a method of measuring the temperature of the P-N junction within the light-emitting region of a quasi-continuous-wave or pulsed semiconductor laser diode device. A series of relatively short and low current monitor pulses are applied to the laser diode in the period between the main drive current pulses necessary to cause the semiconductor to lase. At the sufficiently low current level of the monitor pulses, the laser diode device does not lase and behaves similar to an electronic diode. The voltage across the laser diode resulting from each of these low current monitor pulses is measured with a high degree of precision. The junction temperature is then determined from the measured junction voltage using their known linear relationship.

Meadows, Byron L.↗
NASA NTRS2012

Organic materials able to detect analytes

The present invention generally relates to polymers with lasing characteristics that allow the polymers to be useful in detecting analytes. In one aspect, the polymer, upon an interaction with an analyte, may exhibit a change in a lasing characteristic that can be determined in some fashion. For example, interaction of an analyte with the polymer may affect the ability of the polymer to reach an excited state that allows stimulated emission of photons to occur, which may be determined, thereby determining the analyte. In another aspect, the polymer, upon interaction with an analyte, may exhibit a change in stimulated emission that is at least 10 times greater with respect to a change in the spontaneous emission of the polymer upon interaction with the analyte. The polymer may be a conjugated polymer in some cases. In one set of embodiments, the polymer includes one or more hydrocarbon side chains, which may be parallel to the polymer backbone in some instances. In another set of embodiments, the polymer may include one or more pendant aromatic rings. In yet another set of embodiments, the polymer may be substantially encapsulated in a hydrocarbon. In still another set of embodiments, the polymer may be substantially resistant to photobleaching. In certain aspects, the polymer may be useful in the detection of explosive agents, such as 2,4,6-trinitrotoluene (TNT) and 2,4-dinitrotoluene (DNT).

Rose, Aimee↗
NASA NTRSDate not supplied

Progress of 2.05 uM Fiber Laser Development for A Martian Co2 Dial

We have proposed a new concept for differential absorption lidar (DIAL) operating in the 2050 nm CO 2 absorption band for atmospheric CO 2 and pressure observations on Mars. This concept has earned us funding from NASA's PICASSO Program to advance 2050 nm fiber laser technology for future space applications. The laser design is an all-fiber master oscillator and power amplifier (MOPA) system. The master oscillator with pulse shaping and several stages of fiber preamplifiers has been built. Preliminary tests show the output pulse energy can reach 1 mJ, meeting our baseline goal. However, the current power amplifier design has an issue with undesired parasitic lasing at a different frequency, which exhausts pump energy and limits the laser energy. We have modified the power amplifier design to suppress parasitic lasing, and higher laser power energy is expected. To achieve high measurement accuracy, the laser frequency must be stabilized. A fraction of the master oscillator is split to lock the laser frequency to the center of the selected absorption line. The laser can then be shifted to a frequency far from the absorption line center, where extinction due to CO 2 and other trace gases is minimal, serving as the offline reference. The online wavelength is optimized at 2050.44156 nm, ensuring a CO 2 absorption optical depth (AOD) of approximately 1.1 at 3 km, which maximizes the signal-to-noise ratio (SNR) for measurements in the lower Martian atmosphere. At the conference, we will provide more details about this project and report on the progress of instrument development.

DIAL↗
DOE OSTI2024

Lateral Confinement in 2D Nanoplatelets: A Strategy to Expand the Colloidal Quantum Engineering Toolbox

Among colloidal nanocrystals, 2D nanoplatelets offer a unique set of properties with exceptionally narrow luminescence and low lasing thresholds. Furthermore, their anisotropic shape expands the playground for the complex design of heterostructures where spectra but also scattering rates can be engineered. A challenge that still remains is to combine shell growth which makes NPLs stable, with spectral tunability. Indeed, most reported shelled nanoplatelets end up being red emitters due to a loss of quantum confinement. Here, the combination of both lateral and in-plane confinements within a single heterostructure is explored. A CdS/CdSe/CdS/CdZnS core–crown–crown shell structure that enables yellow emission is grown and that is responsive to a large range of excitation including visible photons, X-ray photons, electron beams, and electrical excitations. k.p simulations predict that emission tunability of up to several 100 s of meV can be obtained in ideal structures. This material also displays stimulated emission resulting from bi-exciton emission with a low threshold. Once integrated into an LED stack, this material is compatible with sub-bandgap excitation and exhibits high luminance. Scaling of the electroluminescence properties by downsizing the pixel size is also investigated.

2D materials↗
DOE OSTI2025

Ligand‐Induced Crystallization Control in MAPbBr 3 Hybrid Perovskites for High Quality Nanostructured Films

AbstractControlling the formation of hybrid perovskite thin films is crucial in obtaining high‐performance optoelectronic devices, since factors like morphology and film thickness have a profound impact on a film's functionality. For light‐emitting applications grain sizes in the sub‐micrometer‐range have previously shown enhanced brightness. It is therefore crucial to develop simple, yet reliable methods to produce such films. Here, a solution‐based synthesis protocol for the on‐substrate formation of MAPbBr3 (MA = methylammonium) nanostructures by adding the bifunctional rac‐3‐aminobutyric acid to the precursor solution is reported. This synthesis route improves key optical properties such as photoluminescence quantum yields and life times of excited states by inducing a controlled slow‐down of the film formation and suppressing agglomeration effects. In situ spectroscopy reveals a delayed and slowed down crystallization process, which achieves synthesis of perovskite structures with much reduced defect densities. Further, aggregation can be controlled by the amount of amino acid added and adjusting the synthesis protocol allows to produce cubic crystallites with targeted size from nanometer to micrometer scales. The nanocrystalline MAPbBr3 samples show enhanced amplified spontaneous emission (ASE) intensities, reduced ASE thresholds and purer ASE signals, compared to pristine films, even under intense optical driving, making them promising structures for lasing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Lines of Bound States in the Continuum in Monodisperse Microsphere Structures

Incorporating epitaxially grown active semiconductor media into self-assembled microsphere crystals has remained a major challenge as the curved geometry of the spheres is incompatible with conventional planar growth and patterning techniques. As a result, active photonic devices based on such self-assembled structures, which have other desirable properties such as enabling the rapid assembly of large area systems, have been elusive. Here, we numerically demonstrate an alternative route to creating high-Q resonances in microsphere-based nanophotonic assemblies compatible with standard optical gain materials. We show that close-packed layers of monodisperse microspheres can exhibit symmetry bandgaps, regardless of their layer stacking order. Thus, this microsphere environment can be used to create lines of bound states in the continuum (BICs) of an embedded slab made of active material. Using a realistic ZnS@SiO 2 (core-shell) architecture and sphere diameters compatible with scalable colloidal assembly, we predict sharp spectral features in angle-resolved transmission that trace these lines of BICs and persist in the presence of some fabrication disorder. Altogether, in enabling the integration of unpatterned epitaxial gain slabs with large-area colloidal microsphere assemblies, this approach opens a practical path toward active, dynamically reconfigurable photonic devices that leverage BIC physics for narrow-linewidth lasing and enhanced light–matter interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Elucidating the Role of InGaAs and InAlAs Buffers on Carrier Dynamics of Tensile-Strained Ge Double Heterostructures

Extensive research efforts of strained germanium (Ge) are currently underway due to its unique properties, namely, (i) possibility of band gap and strain engineering to achieve a direct band gap, thus exhibiting superior radiative properties, and (ii) higher electron and hole mobilities than Si for upcoming technology nodes. Realizing lasing structures is vital to leveraging the benefits of tensile-strained Ge (ε-Ge). Here, we use a combination of different analytical tools to elucidate the effect of the underlying InGaAs/InAlAs and InGaAs overlaying heterostructures on the material quality and strain state of ε-Ge grown by molecular beam epitaxy. Using X-ray analysis, we show the constancy of tensile strain in sub-50 nm ε-Ge in a quantum-well (QW) heterostructure. Further, effective carrier lifetime using photoconductive decay as a function of buffer type exhibited a high (low) defect-limited carrier lifetime of ~68 ns (~13 ns) in 0.61% (0.66%) ε-Ge grown on an InGaAs (InAlAs) buffer. These results correspond well with the measured surface roughness of 1.289 nm (6.303 nm), consistent with the surface effect of the ε-Ge/III–V heterointerface. Furthermore, a reasonably high effective lifetime of ~78 ns is demonstrated in a QW of ~30 nm 1.6% ε-Ge, a moderate reduction from ~99 ns in uncapped ε-Ge, alluding to the surface effect of the overlying heterointerface. Thus, the above results highlight the prime quality of ε-Ge that can be achieved via III–V heteroepitaxy and paves a path for integrated Ge photonics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Harmonic and Subharmonic RF Injection Locking of THz Metasurface Quantum-Cascade VECSEL

Harmonic and subharmonic RF injection locking is demonstrated in a terahertz (THz) quantum-cascade vertical-external-cavity surface-emitting laser (QC-VECSEL). By tuning the RF injection frequency around integer multiples and submultiples of the cavity round-trip frequency, different harmonic and subharmonic orders can be excited in the same device. Modulation-dependent behavior of the device has been studied with recorded lasing spectral broadening and locking bandwidths in each case. In particular, harmonic injection locking results in the observation of harmonic spectra with bandwidths over 200 GHz. A semiclassical Maxwell-density matrix formalism has been applied to interpret QC-VECSEL dynamics, which aligns well with experimental observations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Towards higher frequencies in a compact prebunched waveguide THz-FEL

Free-electron-lasers fill a critical gap in the space of THz-sources as they can reach high average and peak powers with spectral tunability. Using a waveguide in a THz FEL significantly increases the coupling between the relativistic electrons and electromagnetic field enabling large amounts of radiation to be generated in a single passage of electrons through the undulator. In addition to transversely confining the radiation, the dispersive properties of the waveguide critically affect the velocity and slippage of the radiation pulse which determine the central frequency and bandwidth of the generated radiation. In this paper, we characterize the spectral properties of a compact waveguide THz FEL including simultaneous lasing at two different frequencies and demonstrating tuning of the radiation wavelength in the high frequency branch by varying the beam energy and ensuring that the electrons injected into the undulator are prebunched on the scale of the resonant radiation wavelength.

Experimental particle physics↗
DOE OSTI2024

Two-dimensional-lattice-confined single-molecule-like aggregates

Intermolecular distance largely determines the optoelectronic properties of organic matter. Conventional organic luminescent molecules are commonly used either as aggregates or as single molecules that are diluted in a foreigner matrix. They have garnered great research interest in recent decades for a variety of applications, including light-emitting diodes, lasers and quantum technologies, among others. However, there is still a knowledge gap on how these molecules behave between the aggregation and dilution states. Here we report an unprecedented phase of molecular aggregate that forms in a two-dimensional hybrid perovskite superlattice with a near-equilibrium distance, which we refer to as a single-molecule-like aggregate (SMA). By implementing two-dimensional superlattices, the organic emitters are held in proximity, but, surprisingly, remain electronically isolated, thereby resulting in a near-unity photoluminescence quantum yield, akin to that of single molecules. Moreover, the emitters within the perovskite superlattices demonstrate strong alignment and dense packing resembling aggregates, allowing for the observation of robust directional emission, substantially enhanced radiative recombination and efficient lasing. Molecular dynamics simulations together with single-crystal structure analysis emphasize the critical role of the internal rotational and vibrational degrees of freedom of the molecules in the two-dimensional lattice for creating the exclusive SMA phase. Furthermore, this two-dimensional superlattice unifies the paradoxical properties of single molecules and aggregates, thus offering exciting possibilities for advanced spectroscopic and photonic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Solving tricky quantum optics problems with assistance from large language models

The capabilities of modern artificial intelligence (AI) as a “scientific collaborator” are explored by engaging it with three nuanced problems in quantum optics: state populations in optical pumping, resonant transitions between decaying states (the Burshtein effect), and degenerate mirrorless lasing. Through iterative dialogue, the authors observe that AI models–when prompted and corrected–can reason through complex scenarios, refine their answers, and provide expert-level guidance, closely resembling the interaction with an adept colleague. The findings highlight that AI can democratize access to sophisticated modeling and analysis, shifting the focus in scientific practice from technical mastery to the generation and testing of ideas, and reducing the time for completing research tasks from days to minutes.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Delay-resolved spectroscopy in terahertz photonic circuits

Photonic integrated circuits incorporating intersubband transitions are ideal for mid-infrared and terahertz nanophotonics. However, the design of epitaxies has long been inhibited by two factors: the modest predictivity of ab initio theory and the absence of absolute intersubband gain and loss measurements under operating conditions. Existing measurements either yield inaccurate gain profiles or do not accurately assess dependence on frequency, bias, and temperature. Here, we present a delay-resolved absolute-referencing method for accurate gain evaluation without these limitations, addressing a long-standing challenge. By creating a photonic circuit that allows broadband pulses to traverse different lengths of a gain medium, we measure the absolute transmission of intersubband structures. Gain profiles match theoretical predictions at lower temperatures, with gain and dispersion clamping after lasing, and faster-than-expected degradation occurs at higher temperatures. Our approach provides a precise experimental evaluation of temperature-dependent gain performance and gives insight into optimizing temperature performance and frequency comb designs.

Optical spectroscopy↗