Search NASA⌕ Search

SEARCH · Search NASA

Results for “layered 2D materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Clean 2D superconductivity in a bulk van der Waals superlattice

Alternative route to a 2D superconductor Single layers of transition metal dichalcogenides exhibit exotic properties, including superconductivity. The usual route to obtaining such samples is to exfoliate a three-dimensional (3D) crystal. Devarakonda et al. instead grew a superlattice comprising alternating layers of the transition metal dichalcogenide hexagonal NbS 2 and the material Ba 3 NbS 5 (see the Perspective by Schoop). The inert Ba 3 NbS 5 layers serve to dissociate the superconducting NbS 2 layers from one another, resulting in 2D superconductivity with high carrier mobility. The combination of high mobility and reduced dimensionality may give rise to exotic quantum phases. Science , this issue p. 231 see also p. 170

Science & Technology - Other Topics↗
DOE OSTI2022

Hydrogen Crossover Flux through Two-Dimensional Nanomaterials

Energy storage and conversion devices require an ion-exchange membrane with high transmission of charge-balancing ions and separation of anode and cathode electrolytes/gases. This ensures optimum device performance. Most conventional membranes suffer huge cross-permeation resulting in low energy efficiency and material degradation. This work investigated hydrogen permeability and proton transmission through membrane electrode assemblies (MEAs) containing a monolayer of hexagonal boron nitride and single-layer and bi-layer graphene in a gas-phase small-scale cell and a liquid cell. Here we found that the hydrogen crossover flux through MEAs with 2D materials was inhibited by at least a factor of 5 compared to the one without. Single-layer graphene and boron nitride enabled high proton transmission, but bi-layer graphene inhibited proton conduction. Defect visualization of 2D materials revealed few atomic-scale defects in graphene. These findings suggest that a monolayer of 2D material may provide good selectivity for energy conversion and storage devices by blocking species crossover while allowing high proton transmission.

2D materials↗
DOE OSTI2024

Electrochemical Control of the Ultrafast Lattice Response of a Layered Semimetal

The unique layer-stacking in two-dimensional (2D) van der Waals materials facilitates the formation of nearly degenerate phases of matter and opens novel routes for the design of low-power, reconfigurable functional materials. Electrochemical ion intercalation between stacked layers offers a promising approach to stabilize bulk metastable phases and to explore the effects of extreme carrier doping and strain. However, in situ characterization methods to study the structural evolution and dynamical functional properties of these intercalated materials remains limited. Here a novel experimental platform is presented capable of simultaneously performing electrochemical lithium-ion intercalation and multimodal ultrafast characterization of the lattice using both electron diffraction and nonlinear optical techniques. Using the layered semimetal WTe 2 as a model system, the interlayer shear phonon mode that modulates stacking between 2Dlayers is probed, showing that small amounts of lithiation enhance the amplitude and lifetime of the phonon, contrary to expectations. This results from the dynamically fluctuating and anharmonic structure between nearly degenerate phases at room temperature, which can be stabilized by electronic carriers accompanying the inserted lithium ions. At high lithiation, the T d ’ structure emerges and quenches the phonon response. This work defines new approaches for using electrochemistry to engineer the dynamic structure of 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Cr silicate as a prototype for engineering magnetic phases in air-stable two-dimensional transition-metal silicates

Abstract Identifying environmentally inert, ferromagnetic two-dimensional (2D) materials with high Curie temperatures ( T c ) down to the single layer limit has been an obstacle to fundamental studies of 2D magnetism and application of 2D heterostructures to spin-polarized devices. To address this challenge, the growth, structure and magnetic properties of a 2D Cr-silicate single layer on Pt(111) was investigated experimentally and theoretically. The layer was grown by sequentially depositing SiO and Cr followed by annealing in O 2 . Scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and low energy electron microscopy all indicated a well-ordered layer that uniformly covered the surface, with STM and LEED indicating that the silicate relaxed to its favored lattice constant. Further experimental characterizations demonstrated that the Cr was nominally 3+ but with a lower electron density than typical trivalent Cr compounds. Comparison with theory identified a Cr 2 Si 2 O 9 structure that resembles a single layer of a dehydrogenated dioctahedral silicate. Magnetic circular dichroism in x-ray absorption spectroscopy revealed a ferromagnetically ordered state up to at least 80 K. Theoretical analysis revealed that the Cr in a dehydrogenated Cr-silicate/Pt(111) is more oxidized than Cr in freestanding Cr 2 Si 2 O 9 H 4 layers. This greater oxidation was found to enhance ferromagnetic coupling and suggests that the magnetism may be tuned by doping. The 2D Cr-silicate is the first member of a broad series of possible layered first-row transition metal silicates with magnetic order; thus, this paper introduces a new platform for investigating 2D ferromagnetism and the development of magnetoelectronic and spintronic devices by stacking 2D atomic layers.

2D materials↗
DOE OSTI2024

Mixed Enthalpy–Entropy Descriptor for the Rational Design of Synthesizable High-Entropy Materials Over Vast Chemical Spaces

The practically unlimited high-dimensional composition space of high-entropy materials (HEMs) has emerged as an exciting platform for functional material design and discovery. However, the identification of stable and synthesizable HEMs and robust design rules remains a daunting challenge. Here, we propose a mixed enthalpy–entropy descriptor (MEED) that enables highly efficient, robust, high-throughput prediction of synthesizable HEMs across vast chemical spaces from first-principles. The MEED is based on two parameters: the relative formation enthalpy with respect to the most stable competing compound and the spread of the point-defect formation energy spectrum. The former measures the relative synthesizability of an HEM to its most stable competing phase, going beyond the conventional thermodynamic understanding. Further, the latter gauges the relative entropy forming ability of an HEM, entailing no sampling over numerous alloy configurations. By applying the MEED to two structurally distinct representative material systems (i.e., 3D rocksalt carbides and 2D layered sulfides), we not only successfully identify all experimentally reported HEMs within these systems but also reveal a cutoff criterion for assessing their relative synthesizability within each system. By the MEED, tens of new high-entropy carbides and 2D high-entropy sulfides are also predicted, which have the potential for a wide variety of applications such as coating in aerospace devices, energy conversion and storage, and flexible electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-resolution optical micro-spectroscopy extending from the near-infrared to the vacuum-ultraviolet

Optical characterization of small samples over a wide spectral range with rapid data acquisition is essential for the analysis of many material systems, such as 2D van der Waals layers and their heterostructures. In this paper, we present the design and implementation of a tabletop micro-spectroscopy system covering the near-infrared to the vacuum-ultraviolet (1.2 eV–6.8 eV or ~1.0 μm to 185 nm) using mostly off-the-shelf components. It can measure highly reproducible local reflectance spectra with a total integration time of a few minutes and a full-width-half-maximum spot size of 2.7 by 5.6 μm. For precise positioning, the design also allows simultaneous monitoring of the measurement location and the wide-field image of the sample. We demonstrate ultra-broadband reflectance spectra of exfoliated thin flakes of several wide-gap 2D materials, including ZnPS 3 , hexagonal BN, and Ca(OH) 2 .

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Low-dimensional metal–organic frameworks: a pathway to design, explore and tune magnetic structures

Here, the magnetic structure adopted by a material relies on symmetry, the hierarchy of exchange interactions between magnetic ions and local anisotropy. A direct pathway to control the magnetic interactions is to enforce dimensionality within the material, from zero-dimensional isolated magnetic ions, one-dimensional (1D) spin-chains, two-dimensional (2D) layers to three-dimensional (3D) order. Being able to design a material with a specific dimensionality for the phenomena of interest is non-trivial. While many advances have been made in the area of inorganic magnetic materials, organic compounds offer distinct and potentially more fertile ground for material design. In particular magnetic metal–organic frameworks (mMOFs) combine magnetism with non-magnetic property functionality on the organic linkers within the structural framework, which can further be tuned with mild perturbations of pressure and field to induce phase transitions. Here, it is examined how neutron scattering measurements on mMOFs can be used to directly determine the magnetic structure when the magnetic ions are in a 2D layered environment within the wider 3D crystalline framework. The hydrated formate, in deuterated form, Co(DCOO) 2 ·2D 2 O, which was one of the first magnetic MOFs to be investigated with neutron diffraction, is reinvestigated as an exemplar case.

magnetism↗
DOE OSTI2025

UV-Enabled Defect Engineering in Multilayer GaSe and InSe and UV Writing of the Grating Pattern

III–VI post-transition-metal chalcogenides are layered semiconductor materials that exhibit direct band gaps in multilayers. Defect engineering is essential in 2D layered semiconductors for functional devices. Here, in this work, we report defect engineering in multilayer gallium selenide (GaSe) and indium selenide (InSe), where defects generated by ultraviolet (UV, 325 nm) laser irradiation result in an additional photoluminescence (PL) line. The additional PL line is due to defect-bound excitons. Characteristics of the defect emission are similar in GaSe and InSe samples subjected to UV irradiation, air annealing, and hydrostatic pressure. Two-beam UV interference was applied to create grating patterns with a periodic array of low and high densities of defects in GaSe. Density functional theory has identified the defect type in GaSe. The results provide valuable insights into defect generation and UV scribing of photonic circuits in 2D Se-based multilayers for optical integration in a 2D platform.

2D multilayered materials↗
DOE OSTI2021

2D Mg-Cu Intermetallic Compounds with Nontrivial Band Topology and Dirac Nodal Lines

Synthesis of vertical heterostructures that include atomically thin layers of materials with topologically nontrivial energy bands is desirable for exploring exotic quantum states. In this study, the authors report on atomic-layer-by-layer deposition of magnesium on copper(111) surface by molecular beam epitaxy, monitored in situ by low-energy electron microscopy and diffraction, and modeled by ab initio theory. It is found that a 2D MgCu 2 intermetallic compound forms during initial Mg deposition and persists till a full monolayer of Mg is formed. Deposition of additional Mg triggers a phase transition from the commensurate MgCu 2 to an incommensurate Mg 2 Cu layer and enables growth of the second layer of Mg. Ab initio calculations indicate non-trivial topology of the electron bands in the interfacial Mg 2 Cu layer and the existence of Dirac nodal lines near the Fermi level. The new 2D Mg 2 Cu material emerges as a promising platform to study new topological states of matter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Unusual Ferromagnetic Band Evolution and High Curie Temperature in Monolayer 1T‐CrTe2 on Bilayer Graphene

2D van der Waals ferromagnets hold immense promise for spintronic applications due to their controllability and versatility. Despite their significance, the realization and in-depth characterization of ferromagnetic materials in atomically thin single layers, close to the true 2D limit, has been scarce. Here, a successful synthesis of monolayer (ML) 1T-CrTe2 is reported on a bilayer graphene (BLG) substrate via molecular beam epitaxy. Using angle-resolved photoemission spectroscopy and magneto-optical Kerr effect measurements, that the ferromagnetic transition is observed at the Curie temperature (TC) of 150 K in ML 1T-CrTe2 on BLG, accompanied by unconventional temperature-dependent band evolutions. The spectroscopic analysis and first-principle calculations reveal that the ferromagnetism may arise from Goodenough-Kanamori super-exchange and double-exchange interactions, enhanced by the lattice distortion and the electron doping from the BLG substrate. These findings provide pivotal insight into the fundamental understanding of mechanisms governing 2D ferromagnetism and offer a pathway for engineering higher TC in 2D materials for future spintronic devices.

Park, Kyoungree↗
DOE OSTI2023

Layer-engineered interlayer charge transfer in WSe 2 /WS 2 heterostructures

The layer thickness determines the electronic structure of two-dimensional (2D) materials, leading to different band alignments, which are crucial for the transition metal dichalcogenides heterostructures. Here, we investigated the heterostructure of WSe 2 /WS 2 with different layer thicknesses by steady-state and transient absorption spectroscopy. We observed different ultrafast charge transfer behaviors in 1L-WSe 2 /2L-WS 2 and 2L-WSe 2 /2L-WS 2 few-layer heterostructures. We demonstrate that the layer thickness determines the sequence of intralayer exciton relaxation and interlayer charge transfer. The valley transfer of the band edge induced by the layer thickness can effectively mediate the hot carrier transfer time and interlayer exciton lifetime. Furthermore, these provide us a deeper understanding of carrier dynamics in 2D indirect bandgap semiconductor heterostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Formation mechanism of two-dimensional hexagonal silica on SiO 2 /Si substrate

In this study, owing to their remarkable electronic properties, silica ultrathin films have been utilized as an insulating layer in nanoelectronics systems. Silica films have been epitaxially grown on different substrates using various synthesis methods. Among all fabrication approaches, chemical vapor deposition has long been an advanced method for synthesizing two-dimensional (2D) materials due to its ability to ensure precise stacking control and minimize contamination between layers. This study harnessed the potential of CVD to atomically fabricate thin layered 2D silica on a SiO 2 /Si substrate. Significantly, a unique combination of multiple transition metals and salt as the catalysts aided the formation of 2D silica for the first time. Salt is a crucial catalyst in promoting the evaporation of high-melting-point metal catalysts, resulting in hexagonal nucleation sites on the SiO 2 /Si wafer. By meticulously controlling growth parameters, a distinctive hexagonal structure was obtained. Correspondingly, this work delves into the growth mechanism of 2D silica, as evidenced by experiments involving salt alone and individual transition metals. Group VB transition metals played a prominent role in achieving the hexagonal structure compared to their group IVB counterparts. This research offers insight into the formation and growth mechanism of 2D silica, expanding the understanding of silica nanostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Distance Dependence of Förster Resonance Energy Transfer Rates in 2D Perovskite Quantum Wells via Control of Organic Spacer Length

Two-dimensional (2D) semiconductors are attractive candidates for a variety of optoelectronic applications owing to the unique electronic properties that arise from quantum confinement along a single dimension. Incorporating nonradiative mechanisms that enable directed migration of bound charge carriers, such as Forster resonance energy transfer (FRET), could boost device efficiencies provided that FRET rates outpace undesired relaxation pathways. However, predictive models for FRET between distinct 2D states are lacking, particularly with respect to the distance d between a donor and acceptor. We approach FRET in systems with binary mixtures of donor and acceptor 2D perovskite quantum wells (PQWs), and we synthetically tune distances between donor and acceptor by varying alkylammonium spacer cation lengths. FRET rates are monitored using transient absorption spectroscopy and ultrafast photoluminescence, revealing rapid picosecond lifetimes that scale with spacer cation length. We theoretically model these binary mixtures of PQWs, describing the emitters as classical oscillating dipoles. Finally, we find agreement with our empirical lifetimes and then determine the effects of lateral extent and layer thickness, establishing fundamental principles for FRET in 2D materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Coverage-dependent structures and thermodynamic stability of intercalated Gd layers beneath buffer-layer graphene on SiC(0001)

Electronic properties of two-dimensional (2D) materials are strongly influenced by their atomic arrangements, making the theoretically-aided characterization of experimentally-synthesized 2D structures crucial. Using first-principles density functional theory, we analyze nearly 200 configurations of intercalated Gd layers beneath buffer-layer graphene on SiC(0001) over a Gd coverage range of 0.01 < θ < 1.2. By fully relaxing selectively-constructed configurations at each coverage within a large, low-strain supercell, we determine the coverage dependence of the chemical potential for intercalated Gd structures. Thermodynamically-preferred configurations below θ ≈ 0.8 form single-atom-thick monolayers, while 3D-like or multilayer structures emerge beyond θ ≈ 0.9. Most structures are amorphous-like, including the configuration at the chemical potential minimum around θ ≈ 0.4. In contrast, a strongly stretched Gd(0001)-like monolayer at θ = 1/3 and a nearly perfect Gd(0001) monolayer at θ = 1 are significantly less favorable with 0.16 eV and 0.82 eV higher chemical potentials above the minimum, respectively. Furthermore, the graphene layer decoupled by intercalated Gd near the chemical potential minimum is significantly flatter compared to its morphology above intercalated 3D structures at higher coverages and nearly isolated Gd atoms in the lowest coverage region. In conclusion, these findings align with our experimental results and underscore the need for further research on this unique intercalated system, which holds significant potential for diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Optimized Photoemission from Organic Molecules in 2D Layered Halide Perovskites

In recent years, hybrid organic−inorganic metal halides have been at the forefront of materials research. Typically, the functional (e.g., optoelectronic) properties of hybrid halides are derived from the inorganic structural part, whereas the organic structural units can add extra advantages in terms of stability, rigidity, and processability. Here, we report the design, synthesis, and characterization of two new hybrid materials in which the outstanding photophysical properties originate from the organic structural part. The new compounds, (C 15 H 16 N) 2 CdCl 4 and ((Br)C 15 H 15 N) 2 CdCl 4 , have 2D layered Ruddlesden−Poppertype perovskite structures. These hybrids are blue-white light emitters just like their corresponding pure organic salts, but with much improved emission efficiencies. Optical spectroscopy and density functional theory (DFT) studies confirm that photoemission comes from the trans-stilbene organic cations. The photoluminescence quantum yield (PLQY) values of these new materials are among the highest known, 50.83% and 26.60% for (C 15 H 16 N) 2 CdCl 4 and ((Br)C 15 H 15 N) 2 CdCl 4 , respectively. This is up to a 5-fold increase as compared to the light emission efficiency of the precursor salt C 15 H 16 NCl (PLQY of 10.33%). Alongside their outstanding optical properties, their environmental and thermal stability allow their consideration for potential practical applications such as radiation detection. This work shows that hybrid metal halides can be compositionally and structurally engineered to have highly efficient photoemission originating from the organic components for fast scintillation applications.

Halogens↗
DOE OSTI2021

Realization of an Ideal Cairo Tessellation in Nickel Diazenide NiN 2 : High-Pressure Route to Pentagonal 2D Materials

Most of the studied two-dimensional (2D) materials are based on highly symmetric hexagonal structural motifs. In contrast, lower-symmetry structures may have exciting anisotropic properties leading to various applications in nanoelectronics. In this work we report the synthesis of nickel diazenide NiN 2 which possesses atomic-thick layers comprised of Ni 2 N 3 pentagons forming Cairo-type tessellation. The layers of NiN 2 are weakly bonded with the calculated exfoliation energy of 0.72 J/m 2 , which is just slightly larger than that of graphene. The compound crystallizes in the space group of the ideal Cairo tiling (P4/mbm) and possesses significant anisotropy of elastic properties. The single-layer NiN 2 is a direct-band-gap semiconductor, while the bulk material is metallic. Furthermore, this indicates the promise of NiN 2 to be a precursor of a pentagonal 2D material with a tunable direct band gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enhanced van der Waals epitaxy of germanium by out-of-plane dipole moment induced from transferred graphene on TiN/AlN multilayers

We report recent advances in 3D/2D heterostructures have opened up tremendous opportunities in building highly flexible and durable optoelectronic devices. However, the inherit lack of interfacial bonding and low surface energy of van der Waals surfaces limit the nucleation and growth of 3D materials. Enhancing wettability by providing a porous buffer is effective in growing compound semiconductors on graphene while van der Waals epitaxy of Ge remains challenging. Here, the nucleation of Ge has been significantly improved from an islanded mode to granular modes by using a TiN/AlN multilayered buffer prior to Ge/graphene integration. Highly textured Ge growth with dominating (111), (220), and (311) peaks are identified by x-ray diffraction. The microstructure of the buffer TiN/AlN demonstrates a polycrystalline quality with clean interfaces between each interlayer and the substrate. Kelvin probe force microscopy measurements along the lateral TiN/AlN interface identify a potential drop corresponding to the AlN phase. This contact potential difference between TiN and AlN is the key in generating the out-of-plane dipole moment that modifies the surface energy of the monolayer graphene, resulting in enhanced wettability of the Ge adatoms nucleated on top. Surface dipole induced nucleation of 3D semiconductor thin films on 2D materials via the proper design of buffer layer is fundamentally important to enhance the 3D/2D growth toward flexible optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

When van der Waals Met Kagome: A 2D Antimonide with a Vanadium-Kagome Network

2D materials showcase unconventional properties emerging from quantum confinement effects. In this work, a “soft chemical” route allows for the deintercalation of K + from the layered antimonide KV 6 Sb 6 , resulting in the discovery of a new metastable 2D-Kagome antimonide K 0.1(1) V 6 Sb 6 with a van der Waals gap of 3.2 Å. The structure of K 0.1(1) V 6 Sb 6 was determined via the synergistic techniques, including X-ray pair distribution function analysis, advanced transmission electron microscopy, and density functional theory calculations. The K 0.1(1) V 6 Sb 6 compound crystallizes in the monoclinic space group C2/m (a = 9.57(2) Å, b = 5.502(8) Å, c = 10.23(2) Å, β = 97.6(2)°, Z = 2). The [V 6 Sb 6 ] layers in K 0.1(1) V 6 Sb 6 are retained upon deintercalation and closely resemble the layers in the parent compound, yet deintercalation results in a relative shift of the adjacent [V 6 Sb 6 ] layers. The magnetic properties of the K 0.1(1) V 6 Sb 6 phase in the 2–300 K range are comparable to those of KV 6 Sb 6 and another Kagome antimonide KV 3 Sb 5 , consistent with nearly temperature-independent paramagnetism. Electronic band structure calculation suggests a nontrivial band topology with flat bands and opening of band crossing afforded by deintercalation. Transport property measurements reveal a metallic nature for K 0.1(1) V 6 Sb 6 and a low thermal conductivity of 0.6 W K –1 m –1 at 300 K. Additionally, ion exchange in KV 6 Sb 6 via a solvothermal route leads to a successful partial exchange of K + with A + (A = Na, Rb, and Cs). Here, this study highlights the tunability of the layered structure of the KV 6 Sb 6 compound, providing a rich playground for the realization of new 2D materials.

2D↗