Search NASA⌕ Search

SEARCH · Search NASA

Results for “leakage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Analysis for leakage and rotordynamic coefficients of surface roughened tapered annular gas seals

In order to soften the effects of rub, the smooth stators of turbine gas seals are sometimes replaced by a honeycomb surface. This deliberately roughened stator and smooth rotor combination retards the seal leakage and may lead to enhanced rotor stability. However, many factors determine the rotordynamic coefficients and little is known as to the effectiveness of these honeycomb seals under various changes in the independent seal parameters. An analytical-computational method to solve for the rotordynamic coefficients of this type of compressible-flow seal is developed. The governing equations for surface roughned tapered annular gas seals are based on a modified Hirs' turbulent bulk flow model. A perturbation analysis is employed to develop zeroth and first-order perturbation equations. These equations are numerically integrated to solve for the leakage, pressure, density, and velocity for small motion of the shaft about the centered position. The resulting pressure distribution is then integrated to find the corresponding rotor-dynamic coefficients.

Nelson, C. C.↗
NASA NTRS1986

Measuring Heat-Exchanger Water Leakage

Water leakage in heat exchanger measured directly with help of electroytic hygrometer. In new technique, flow of nitrogen gas set up in one loop of heat exchanger. Other loop filled with water under pressure. Water concentration produced by leakage of water into nitrogen flow measured by hygrometer. New measurement method determines water concentrations up to 2,000 parts per million with accuracy of +/- 5 percent.

Zampiceni, J.↗
NASA NTRS1986

Analysis of Leakage Flows in Turbomachinery

Navier-Stokes calculations predict leakage flow in high-pressure fuel pump. Accurate calculation of internal turbomachinery flow dynamics helps spot possible failure modes and establishes coupling between cyclic loading and structural dynamics. Approach also useful in analyzing two-and quasi-three-dimensional leakage flows in other turbomachinery components.

Sindir, M. M.↗
NASA NTRS1987

Calculating Leakage Around Turbopump Inducer Shrouds

New mathematical model for leakage flow around shrouded turbopump inducers yields more realistic analyses from which designers determine best geometry for leakage-flow-reinjection ports. Also, designers use calculated velocity profile at inducer leading edge to determine blade-angle distribution of inducer leading edge.

Meng, Sen Yih↗
NASA NTRS1987

Measuring Leakage in a Pressurized-Fluid Loop

Technique applied to systems with inaccessible parts and connections. Fluid added to system by fluid-injection assembly to make up for leakage. Amount required to restore pressure in system is measure of leakage rate.

Clarke, Brian D.↗
NASA NTRS1986

Energetic ions upstream of planetary bow shocks: Fermi acceleration or leakage

Spacecraft observations of Jupiter, Saturn, and Earth planetary bow shocks are assessed. For Jupiter, the unique composition of magnetospheric plasma, where oxygen and sulfur ions are major components, and the simultaneous presence of MeV electrons enable identification of the upstream particles as originating from within the magnetosphere. The observations at Saturn are phenomonologically similar, but no unique tracer element exists which can identify the origin. Earth observations show that substantial energetic particle activity occurs within the Earth's plasma sheet when upstream ions and electrons are observed in the interplanetary medium. Observations of the three planets are discussed to compare in-situ acceleration in the foreshock region vs. leakage of already accelerated ions from the parent magnetosphere. It is concluded that the evidence favors magnetospheric leakage.

Krimigis, S. M.↗
NASA NTRS1987

Rotordynamic coefficients and leakage flow of parallel grooved seals and smooth seals

Based on Childs finite length solution for annular plain seals an extension of the bulk flow theory is derived to calculate the rotordynamic coefficients and the leakage flow of seals with parallel grooves in the stator. Hirs turbulent lubricant equations are modified to account for the different friction factors in circumferential and axial direction. Furthermore an average groove depth is introduced to consider the additional circumferential flow in the grooves. Theoretical and experimental results are compared for the smooth constant clearance seal and the corresponding seal with parallel grooves. Compared to the smooth seal the direct and cross-coupled stiffness coefficients as well as the direct damping coefficients are lower in the grooved seal configuration. Leakage is reduced by the grooving pattern.

Nordmann, R.↗
NASA NTRS1986

Energetic ions upstream of planetary bow shocks - Fermi acceleration or leakage?

Observations of energetic ions upstream of earth, Jupiter, and Saturn are examined. The velocity dispersions, energy spectra, and ion compositions for the three planets are described. Fermi acceleration and leakage are analyzed as the potential mechanism for the presence of energetic particles upstream of planetary bow shocks. It is noted that energetic ions upstream of planetary bow shock originate from within the planetary magnetosphere, and leakage is the mechanism for the energetic particles.

Krimigis, S. M.↗
NASA NTRS1987

Impeller shroud to casing leakage flow simulations in the Space Shuttle Main Engine high pressure fuel pump

Quasi-three-dimensional Navier-Stokes calculations were carried out for the Space Shuttle Main Engine high-pressure fuel pump to simulate the impeller shroud to casing leakage flow. This flow geometry was modeled as an axisymmetric cavity flow with a stationary surface representing the casing, and a rotating surface denoting the impeller. A 63 x 81-node mesh provided sufficient resolution in the regions of greatest flow variations and reduced the effects of numerical diffusion. The turbulence field was closed with the high Reynolds number form of the k-epsilon model supplemented with wall functions in the vicinity of the walls. Finally, a parametric study quantified the effects of through mass flow changes on this leakage flow.

Sindir, Munir M.↗
NASA NTRS1987

Energetic magnetospheric ions at the dayside magnetopause - Leakage or merging?

The leakage model for the escape of energetic magnetospheric particles into the magnetosheath is described, making comparisons with the merging model where possible. Reported observations of energetic particles at the dayside magnetopause are reexamined, and it is concluded that they do not conclusively support the merging model, either on a case-by-case basis or statistically. New observations made by the Charge Composition Explorer satellite during the Active Magnetospheric Particle Tracer Explorers program are presented. They indicate that magnetospheric ions of all species steadily escape into the magnetosheath and stream away from the magnetopause, regardless of the magnetosheath magnetic field orientation. It is concluded that the leakage model explains both the new and old observations at least as well as, or better than, the merging model.

Sibeck, D. G.↗
NASA NTRS1988

Leakage predictions for Rayleigh-step, helium-purge seals

Rayleigh-step, helium purge, annular shaft seals, studied for use in liquid oxygen turbopumps, generate a hydrodynamic force that enables the seal to follow shaft perturbations. Hence, smaller clearances can be used to reduce seal leakage. FLOWCAL, a computer code developed by Mechanical Technology Incorporated, predicts gas flow rate through an annular seal with an axial pressure gradient. Analysis of a 50-mm Rayleigh-step, helium-purge, annular seal showed the flow rate increased axial pressure gradient, downstream pressure, and eccentricity ratio. Increased inlet temperature reduced leakage. Predictions made at maximum and minimum clearances (due to centrifugal and thermal growths, machining tolerances and + or - 2 percent uncertainty in the clearance measurement) placed wide boundaries on expected flow rates. The widest boundaries were set by thermal growth conditions. Predicted flow rates for a 50-mm Rayleigh-step, helium-purge, annular seal underestimated measured flow rates by three to seven times. However, the analysis did accurately predict flow rates for choked gas flow through annular seals when compared to flow rates measured in two other independent studies.

Proctor, Margaret P.↗
NASA NTRS1989

Annular honeycomb seals: Test results for leakage and rotordynamic coefficients; comparisons to labyrinth and smooth configurations

Test results are presented for leakage and rotordynamic coefficients for seven honeycomb seals. All seals have the same radius, length, and clearance; however, the cell depths and diameters are varied. Rotordynamic data, which are presented, consist of the direct and cross-coupled stiffness coefficients and the direct damping coefficients. The rotordynamic-coefficient data show a considerable sensitivity to changes in cell dimensions; however, no clear trends are identifiable. Comparisons of test data for the honeycomb seals with labyrinth and smooth annular seals show the honeycomb seal had the best sealing (minimum leakage) performance, followed in order by the labyrinth and smooth seals. For prerotated fluid entering the seal, in the direction of shaft rotation, the honeycomb seal has the best rotordynamic stability followed in order by the labyrinth and smooth. For no prerotation, or fluid prerotation against shaft rotation, the labyrinth seal has the best rotordynamic stability followed in order by the smooth and honeycomb seals.

Childs, Dara W.↗
NASA NTRS1989

Annular honeycomb seals: Test results for leakage and rotordynamic coefficients - Comparisons to labyrinth and smooth configurations

Test results are presented for leakage and rotordynamic coefficients for seven honeycomb seals. All seals have the same radius, length, and clearance; however, the cell depths and diameters are varied. Rotordynamic data, which are presented, consist of the direct and cross-coupled stiffness coefficients and the direct damping coefficients. The rotordynamic-coefficient data show a considerable sensitivity to changes in cell dimensions; however, no clear trends are identifiable. Comparisons of test data for the honeycomb seals with labyrinth and smooth annular seals shows the honeycomb seal had the best sealing (minimum leakage) performance, followed in order by the labyrinth and smooth seals. For prerotated fluids entering the seal, in the direction of shaft rotation, the honeycomb seal has the best rotordynamic stability followed in order by the labyrinth and smooth. For no prerotation, or fluid prerotation against shaft rotation, the labyrinth seal has the best rotordynamic stability followed in order by the smooth and honeycomb seals.

Childs, D.↗
NASA NTRS1991

Significant long-term reduction in n-channel MESFET subthreshold leakage using ammonium-sulfide surface treated gates

Ammonium-sulfide (NH4)2S treated gates have been employed in the fabrication of GaAs MESFETs that exhibit a remarkable reduction in subthreshold leakage current. A greater than 100-fold reduction in drain current minimum is observed due to a decrease in Schottky gate leakage. The electrical characteristics have remained stable for over a year during undesiccated storage at room temperature, despite the absence of passivation layers.

Neudeck, P. G.↗
NASA NTRS1992

Pressure oscillation in the leakage annulus between a shrouded impeller and its housing due to impeller-discharge-pressure disturbances

The perturbed flow in the leakage path between a shrouded-pump impeller and its housing is analyzed using experiences with the Space Shuttle Main Engine (SSME), high pressure fuel turbopump (HPFTP) wearing-ring seals. Analysis is based on a bulk-flow model which consists of the path-momentum, circumferential momentum, and continuity equations. The pressure oscillations in the leakage annulus are driven by a circumferential variation of the impeller discharge pressure. It is shown that the occurrence and nature of the pressure oscillations depend on the tangential-velocity ratio of the fluid entering the seal, the order of the Fourier coefficient, the closeness of the precessional frequency of the rotating pressure field to the first natural frequency of the fluid annulus, and the clearance of the wearing-ring seal. The results obtained may explain the internal melting observed on SSME HPFTP seal parts.

Childs, D. W.↗
NASA NTRS1992

The design and fabrication of a single leakage-channel grating coupler

The modeling and fabrication is described of waveguide grating couplers with out-coupling efficiencies into a single diffracted order nearing 100 pct. Termed Single Leakage Channel Grating Couplers (SLCGCs), these devices use a high reflectivity dielectric stack to reflect the out-coupled beam diffracted toward the substrate, back up into the air region where it constructively adds with the beam diffracted into the air region. Computer modeling shows that the branching ratio and the leakage rate can be independently controlled, and that the branching ratio is independent of grating depth and grating period. A SLCGC with a branching ratio of 97.1 pct. was fabricated using a combination of vacuum evaporation and wet chemical techniques.

Roncone, Ronald L.↗
NASA NTRS1992

Measured effect of step axial location on labyrinth seal leakage

An advanced, finite volume code has been extensively used in a parametric design study of simple stepped seals, in order to ascertain a leakage-minimizing optimal design and test it, in conjunction with the baseline case of the wear-ring seal of a high pressure pump. It is found that a significant leakage effect arises from this shifting of the rotor and stator sealing surfaces; at extremely low rpm, a significant shaft speed effect occurs for the optimized design in some shaft locations.

Morrison, G. L.↗
NASA NTRS1994

Bag Test Measures Leakage From Insulated Pipe

Test quantifies leakage of gas from pipe even though pipe covered with insulation. Involves use of helium analyzer to measure concentration of helium in impermeable bag around pipe. Test administered after standard soap-solution bubble test indicates presence and general class of leakage.

Schock, Kent D.↗