Search NASA⌕ Search

SEARCH · Search NASA

Results for “lighter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

LTA in the USA - Here's where it stands today

Lighter than air (LTA) vehicles were the first aircraft to fly and, until the disasters of the 1930s, were thought by many to be the primary mode of air transport. The history of LTA in the United States is briefly traced and the reasons for the current revival in interest are discussed. The focal point for this revival was the LTA Workshop hosted by M.I.T. under the joint sponsorship of the United States National Aeronautics and Space Administration, Navy, Federal Aviation Administration and Department of Transportation. The Workshop and its results are discussed in detail.

Vittek, J. F., Jr.↗
NASA NTRS1975

Mars sample return by orbital rendezvous

The return of Mars surface samples by the orbital rendezvous mode would require smaller, lighter vehicles than the direct return mode and would limit the exposure of the earth return systems to possible contamination by Martian biota. The reference mission considered would use a single Titan IIIE/Centaur launch vehicle, carry a 1 kg sample, and be launched in late 1981. The spacecraft would consist of an orbiter, a Mars lander, a Mars ascent vehicle, an earth return vehicle, and an earth entry capsule. The Mars ascent vehicle is the only all-new vehicle required, the others being derived from Viking and other programs. A key consideration is the feasibility of automatic rendezvous and sample transfer between the ascent vehicle and orbiter in Mars orbit. The maneuvers required and the maneuver algorithm developed in a NASA feasibility study are described in detail. The possibility of international cooperation on a Mars orbital rendezvous mission is discussed.

Moore, J. W.↗
NASA NTRS1976

Printed-circuit solar-cell array

Flexible solar-cell array is made thinner and lighter by placing array on substrate which is a lamination of two sheets of plastic film with etched electrical connector for cells between films.

Currier, R. F.↗
NASA NTRS1976

Lightweight orthotic appliances

Graphite-filament reinforced polymer materials are used in applications requiring high tensile strength and modulus. Superior properties of graphite composite materials permit fabrication of supports that are considerably lighter, thinner, and stiffer than conventional components.

Baucom, R. M.↗
NASA NTRS1976

Double-focusing mass spectrometer

Device uses lighter, easily alined, magnet assembly to provide field required to interact with ion beam. It has no separate duct; instead, evacuated duct is formed by pole pieces which support vacuum pump. Magnetic gap and magnet assembly are reduced from 4.64 to 2.54 mm and from 2.4 to 1.5 kg, respectively.

Giffin, C. E.↗
NASA NTRS1976

Firefighter's Breathing System

System, based on open-loop demand-type compressed air concept, is lighter and less bulky than former systems, yet still provides thirty minutes of air supply. Comfort, visibility, donning time, and breathing resistance have been improved. Apparatus is simple to recharge and maintain and is comparable in cost to previously available systems.

Mclaughlan, P. B.↗
NASA NTRS1976

Ultra-lightweight pressure vessels

Composite tanks fabricated from two metal spheres which are pressure welded and then overwrapped with plastic composite are 66 percent lighter than similar all-metal vessels. Overwrap minimizes shrapnel effects, shifts failure mode to that of cyclic leakage, and withstands minimum burst pressure.

Schmidt, W. W.↗
NASA NTRS1977

Inexpensive low-voltage solid-state alarm

Monitor/alarm with audio and visual warning output can be used to warn when prescribed limits of temperature, liquid level, pressure, or similar properties are exceeded. Device is more compact, lighter, and less expensive to manufacture than typical alarm circuits.

Hardy, D. H.↗
NASA NTRS1977

Atmosphere-generating system

Electrolytic conversion of hydrazine and water in low-pressure tanks to life-support atmosphere requires lighter weight equipment than high-pressure or cryogenic storage techniques.

Mahan, R. E.↗
NASA NTRS1975

A preliminary study of the effects of vortex diffusers (winglets) on wing flutter

Some experimental flutter results are presented for a simple, flat-plate wing model and for the same wing model equipped with two different upper surface vortex diffusers over the Mach number range from about 0.70 to 0.95. Both vortex diffusers had the same planform, but one weighed about 0.3 percent of the basic wing weight, whereas the other weighed about 1.8 percent of the wing weight. The addition of the lighter vortex diffuser reduced the flutter dynamic pressure by about 3 percent; the heavier vortex diffuser reduced the flutter dynamic pressure by about 12 percent. The experimental flutter results are compared at a Mach number of 0.80 with analytical flutter results obtained by using doublet lattice and lifting surface (Kernel function) unsteady aerodynamic theories.

Doggett, R. V., Jr.↗
NASA NTRS1975

Basic relationships for LTA economic analysis

Operating costs based on data of actual and proposed airships for conventional lighter than air craft (LTA) are presented. An economic comparison of LTA with the B-47F is included, and possible LTA economic trends are discussed.

Ausrotas, R. A.↗
NASA NTRS1975

Some economic tables for airships

During the course of the Southern California Aviation Council study on lighter than air it was determined that some form of economic base must be developed for estimation of costs of the airship. The tables are presented.

Neumann, R. D.↗
NASA NTRS1975

The effects of selected modern technological concepts on the performance and handling characteristics of LTA vehicles

The results of an airship design sensitivity study are presented. A wide variety of airship design concepts, including the classical and high aero-lift augmented-hybrids are examined with regard to specific technological improvements, and consequent gains in performance, stability and control and flying qualities. Variations in size, payload, power required and airspeed are quantitatively analyzed for airships representing aero-to-buoyant lift ratios of zero to 3.0 over a range of technology improvements implying reduced drag, reduced structural weight fractions and lighter, more efficient propulsion systems. Qualitatively, future airships are discussed in terms of stability, control and flying qualities requirements dictated by projected demands for vastly improved operational effectiveness and ease of handling. Such topics include stability augmentation systems, load-alleviation systems and total computer state-sensing and controls management systems. It was shown that, for the most part, highly refined conventional designs offer attractive gains in both performance and ease of handling. Hybrid airships represent a good potential for missions requiring the transport of heavy payloads at higher airspeeds over shorter ranges without the capability for sustained hover and vertical flight.

Mazza, C. J.↗
NASA NTRS1975

The transport of nuclear power plant components

The problems of transporting nuclear power plant components to landlocked sites where the usual mode of transport by barge cannot be used are considered. Existing methods of ground-based overland transport are discussed and their costs presented. Components are described and traffic density projections made to the year 2000. Plots of units transported versus distance transported are provided for units booked in 1973 and booked and proposed in 1974. It is shown that, for these cases, overland transport requirements for the industry will be over 5,000,000 ton-miles/year while a projection based on increasing energy demands shows that this figure will increase significantly by the year 2000. The payload size, distances, and costs of existing overland modes are significant enough to consider development of a lighter than air (LTA) mode for transporting NSSS components.

Keating, S. J., Jr.↗
NASA NTRS1975

Technology update: Tethered aerostat structural design and material developments

Requirements exist for an extremely stable, high performance, all-weather tethered aerostat system. This requirement has been satisfied by a 250,000 cubic foot captive buoyant vehicle as demonstrated by over a year of successful field operations. This achievement required significant advancements in several technology areas including composite materials design, aerostatics and aerodynamics, structural design, electro-mechanical design, vehicle fabrication and mooring operations. This paper specifically addresses the materials and structural design aspects of pressurized buoyant vehicles as related to the general class of Lighter Than Air vehicles.

Witherow, R. G.↗
NASA NTRS1976

Advanced Supersonic Technology concept AST-100 characteristics developed in a baseline-update study

The advanced supersonic technology configuration, AST-100, is described. The combination of wing thickness reduction, nacelle recontouring for minimum drag at cruise, and the use of the horizontal tail to produce lift during climb and cruise resulted in an increase in maximum lift-to-drag ratio. Lighter engines and lower fuel weight associated with this resizing result in a six percent reduction in takeoff gross weight. The AST-100 takeoff maximum effective perceived noise at the runway centerline and sideline measurement stations was 114.4 decibels. Since 1.5-decibels tradeoff is available from the approach noise, the required engine noise supression is 4.9 decibels. The AST-100 largest maximum overpressure would occur during transonic climb acceleration when the aircraft was at relatively low altitude. Calculated standard +8 C day range of the AST-100, with a 292 passenger payload, is 7348 km (3968 n.mi). Fuel price is the largest contributor to direct operating cost. However, if the AST-100 were flown subsonically (M = 0.9), direct operating costs would increase approximately 50 percent because of time related costs.

Baber, H. T., Jr.↗
NASA NTRS1975

Mount mechanisms for the Saturn 5/Apollo mobile launcher at John F. Kennedy Space Center

A support system was designed to resist hurricane wind loads at the launch pad and to allow the supported structural frame to expand and contract freely under wide ranges of temperature. This system consists of six mount mechanisms devised to meet the previously stated requirements plus a load-carrying capacity for each of 3.2-million kilograms (7-million pounds) downward and 1.6-million kilograms (3.5-million pounds) upward. A similar but lighter system of six mount mechanisms was designed for use in the sheltered environment of the vehicle assembly building. Each requirement and design result is discussed, and each mount mechanism is defined by location and type with references to visual presentations.

Balke, H. A.↗
NASA NTRS1976

Foam composite structures

The need to include fire resistant foams into state of the art aircraft interior paneling to increase passenger safety in aircraft fires was studied. Present efforts were directed toward mechanical and fire testing of panels with foam inclusions. Skinned foam filled honeycomb and PBI structural foams were the two constructions investigated with attention being directed toward weight/performance/cost trade-off. All of the new panels demonstrated improved performance in fire and some were lighter weight but not as strong as the presently used paneling. Continued efforts should result in improved paneling for passenger safety. In particular the simple partial filling (fire side) of state-of-the-art honeycomb with fire resistant foams with little sacrifice in weight would result in panels with increased fire resistance. More important may be the retarded rate of toxic gas evolution in the fire due to the protection of the honeycomb by the foam.

Delano, C. B.↗