Search NASA⌕ Search

SEARCH · Search NASA

Results for “lithium diffusion rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Mechanism of electrochemical lithiation of a metal-organic framework without redox-active nodes

Metal-organic frameworks (MOFs) have many potential uses for separations, storage, and catalysis, but their use as intercalation hosts for batteries has been scarce. In this article, we examine the mechanism of Li insertion in a MOF to provide guidance to future design efforts in this area. As a model system, we choose UiO-66, a MOF with the formula (Zr{sub 6}O{sub 4}(OH){sub 4}){sub 4}(1,4-benzenedicarboxylate){sub 6}, as an electrode material for lithium-ion batteries; this MOF is of special interest because the zirconium is not redox active. We report both quantum mechanical characterization of the mechanism and experimental studies in which the material is synthesized as nanoparticles to reduce diffusion lengths for lithium ions and increase the contact area with a conductive carbon phase. The calculated changes in the IR spectra of UiO-66 and lithiated UiO-66 are consistent with the experimental FTIR results. We found experimentally that this MOF can maintain a specific discharge capacity of at least 118 mAh/g for 30 lithiation and delithiation cycles at a rate of C/5, exhibiting good cyclability. Density functional electronic structure calculations show that the charge transfer during lithiation is mainly from Li to node oxygens and carboxylate oxygens, that is, it involves anions rather than cations or aromatic rings, and they provide a mechanistic understanding of the potential for increased Li capacity because the theoretical capacity of UiO-66 with Li at the oxygens in the metal oxide nodes and the carboxylate linkers is more than 400 mAh/g. The lithiation process greatly decreases the bandgap of UiO-66, which is expected to increase its electronic conductivity. The electrode material was also characterized by X-ray diffraction and scanning electron microscopy, which were consistent in confirming that smaller particle sizes were obtained in lower-temperature syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular understanding of polyelectrolyte binders that actively regulate ion transport in sulfur cathodes

Polymer binders in battery electrodes may be either active or passive. This distinction depends on whether the polymer influences charge or mass transport in the electrode. Though it is desirable to understand how to tailor the macromolecular design of a polymer to play a passive or active role, design rules are still lacking, as is a framework to assess the divergence in such behaviors. We reveal the molecular-level underpinnings that distinguish an active polyelectrolyte binder designed for lithium-sulfur batteries from a passive alternative. The binder, a cationic polyelectrolyte, is shown to both facilitate lithium-ion transport through its reconfigurable network of mobile anions and restrict polysulfide diffusion from mesoporous carbon hosts by anion metathesis, which we show is selective for higher oligomers. These attributes then allow cells to be operated for > 100 cycles with excellent rate capability using cathodes with areal sulfur loadings up to 8.1 mg cm -2 .

25 ENERGY STORAGE↗

The Influence of Heat-Treatment Temperature on the Cation Distribution of LiNi0.5Mn0.5O2 and Its Rate Capability in Lithium Rechargeable Batteries

LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} samples were prepared from NiMnO{sub 3} and Li{sub 2}CO{sub 3} in a range of temperatures from 900 to 1050 C. Synchrotron X-ray diffraction analysis combined with X-ray absorption spectroscopy showed that LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} segregated into one major Ni{sup 2+}O-enriched phase and one minor Li{sub 2}Mn{sup 4+}O{sub 3}-enriched phase, where the extent of segregation decreased with increasing synthesis temperature from 900 to 1050 C. Scanning and transmission electron microscopy combined with energy dispersive X-ray spectroscopy revealed that the segregated domains exist in individual particles. Although all of the LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} samples showed comparable specific capacity ({approx}200 mAh/g) and capacity retention at low current densities, the rate capability of LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} of 900 C is lower than that of LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} of 1000 C. As X-ray photoelectron spectroscopy analysis showed that all of the LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} samples had comparable surface chemistry, the higher rate capability of LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} of 1000 C can be attributed to reduced cation segregation of Ni{sup 2+}O-enriched domains in the layered structure of the major phase, having potentially faster lithium diffusion than that of LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} of 900 C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Evolution and Transition Dynamics in Lithium Ion Battery under Fast Charging: An Operando Neutron Diffraction Investigation

Abstract Fast charging (<15 min) of lithium‐ion batteries (LIBs) for electrical vehicles (EVs) is widely seen as the key factor that will greatly stimulate the EV markets, and its realization is mainly hindered by the sluggish diffusion of Li + . To have a mechanistic understanding of Li + diffusion within LIBs, in this study, structural evolutions of electrodes for a Ni‐rich LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) || graphite cylindrical cell with high areal loading (2.78 mAh cm −2 ) are developed for operando neutron powder diffraction study at different charging rates. Via sequential Rietveld refinements, changes in structures of NMC622 and Li x C 6 are obtained during moderate and fast charging (from 0.27 C to 4.4 C). NMC622 exhibits the same structural evolution regardless of C‐rates. For phase transitions of Li x C 6 , the stage I (LiC 6 ) phase emerges earlier during the stepwise intercalation at a lower state of charge when charging rate is increased. It is also found that the stage II (LiC 12 ) → stage I (LiC 6 ) transition is the rate‐limiting step during fast charging. The LiC 12 → LiC 6 transition mechanism is further analyzed using the Johnson–Mehl–Avrami–Kolmogorov model. It is concluded as a diffusion‐controlled, 1D phase transition with decreasing nucleation kinetics under increasing chargingrates.

25 ENERGY STORAGE↗

3D printing of architected sulfur cathodes with dual-site atomic catalysts for accelerated polysulfide kinetics and Li-ion transport in high areal-loading lithium–sulfur batteries

The practical deployment of lithium–sulfur batteries (LSBs) is hindered by fundamental limitations in conventional slurry-cast cathodes, including poor sulfur utilization, sluggish ion transport, and low areal capacity, particularly in thick electrodes required for high energy density. To address these challenges, we present direct ink writing (DIW) as an additive manufacturing strategy to fabricate advanced current-collector-free, 3D-printed sulfur cathodes (3DP S@CoNi-DSACs/NC) with hierarchically porous architectures that enhance lithium-ion diffusion, promote electrolyte penetration, and reduce interfacial resistance. The synergistic effects of Co/Ni dual-atom sites accelerate redox kinetics and mitigate polysulfide shuttling. As a result, the optimized 3DP cathode with a sulfur loading of 5.4 mg cm −2 demonstrated excellent rate capability, delivering a high reversible capacity of 1041.4 mAh g −1 at 1C with 85.5% capacity retention after 1000 cycles, significantly outperforming its cast counterpart. Remarkably, even at a higher sulfur loading of 8.1 mg cm −2 , the 3DP cathode maintains outstanding performance, achieving a discharge capacity of 1538.4 mAh g −1 and an areal capacity of 12.5 mAh cm −2 at 0.1C. This study not only demonstrates the functional integration of catalytically active materials into 3D printable sulfur cathode architectures but also offers a scalable and transformative platform for building high-performance LSBs beyond conventional electrode manufacturing methods.

3D electrode↗

Nucleation and Early Stage Growth of Li Electrodeposits

The morphologies metal electrodeposits adopt during the earliest stages of electrodeposition are known to play a critical role in the recharge of electrochemical cells that use metals as anodes. In this work, we report results from a combined theoretical and experimental study of the early-stage nucleation and growth of electrodeposited lithium at liquid-solid interfaces. The spatial characteristics of Lithium electrodeposits are studied via Scanning Electron Microscopy in tandem with Image analysis. Comparisons of Li nucleation and growth in multiple electrolytes provide a comprehensive picture of the initial nucleation and growth dynamics. We report that ion diffusion in the bulk electrolyte and through the Solid Electrolyte Interphase (SEI) formed spontaneously on the metal play equally important roles on Li nucleation and growth. Furthermore, we postulate that the underlying physics dictating bulk and surface diffusion are similar across a range of electrolyte chemistries and measurement conditions and that fluorinated electrolytes produce a distinct flattening of Li electrodeposits at low rates. These observations are rationalized using X-ray Photoelectron Spectroscopy (XPS), Electrochemical Impedance Spectroscopy (EIS), and contact angle goniometry to probe the interfacial chemistry and dynamics. Our results show that high interfacial energy and high surface ion diffusivity are necessary for uniform Li plating.

25 ENERGY STORAGE↗

High Rate Oxygen Reduction in Non-aqueous Electrolytes with the Addition of Perfluorinated Additives

The discharge rate capability of Li-air batteries is substantially increased by using perfluorinated compounds as oxygen carriers. The solubility of oxygen in a non-aqueous electrolyte can be significantly increased by the introduction of such compounds, which leads to the increase in the diffusion-limited current of oxygen reduction on the gas diffusion electrode in a Li-air battery. The perfluorinated compound is found to be stable within the electrochemical window of the electrolyte. A powder microelectrode and a rotating disk electrode were used to study the gas diffusion-limited current together with a rotating disk electrode. A 5 mA cm{sup -2} discharge rate is demonstrated in a lab Li-O{sub 2} cell.

25 ENERGY STORAGE↗

Roll-to-roll solvent-free manufactured electrodes for fast-charging batteries

In response to the growing demand for lithium-ion batteries (LIBs), we demonstrate a solvent-free manufacturing technology that can avoid toxic organic solvents and form unique electrode structures to overcome the bottlenecks in low costs and fast charging. The lower tortuosity achieved by the open pores in the dry-printed (DP) electrode allows for a shorter Li+ diffusion pathway, which leads to better rate performance. The DP pouch cells exhibit higher capacity retention of 78% and 69% at 3C and 4C, respectively, compared with 67% and 52% for the slurry cast (SL) cells at the same rates. Moreover, the coating layer on the surface of active materials prevents the excess side reaction between active materials and electrolytes, which prolongs the cycle life of the DP cells. This manufacturing process is a roll-to-roll system with immense potential to be scaled up, providing a more efficient and economical way for battery manufacturing.

36 MATERIALS SCIENCE↗

Operando neutron radiography validates a parameter-free transport–kinetics model for thick solid-state battery cathodes

Tortuosity-weighted interfacial flux for lithium (TWIF-Li) predicts through-thickness Li gradients in thick composite all-solid-state cathodes without fitted parameters. Image-derived microstructures, GITT-derived concentration-dependent solid diffusion, and tortuosity-weighted interfacial kinetics reproduce operando neutron radiography across practical rates, delivering transferable design rules to suppress transport-limited reaction fronts.

Adam, Andre [ORNL] (ORCID:0000000245023033)↗

Nuclear Magnetic Resonance Dynamics of LiTFSI–Pyrazole Eutectic Solvents

Deep Eutectic Solvents (DESs) have emerged as promising candidates to replace conventional organic solvents in various technological applications due to their low vapor pressure, non-flammability, and ease of preparation at low costs. In particular, Type IV DESs, which are composed of metal salts and hydrogen bond donors, are possible replacements for lithium-ion battery electrolytes. In this study, we investigate the molecular dynamics of solvents of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and pyrazole (PYR) at varying LiTFSI:PYR molar ratios (1:2, 1:3, 1:4, 1:5) using Nuclear Magnetic Resonance Dispersion (NMRD) and Pulsed Field Gradient (PFG) Nuclear Magnetic Resonance (NMR). PFG NMR reveals composition-dependent diffusion trends, while NMRD provides molecular-level insights into the longitudinal relaxation rate (R 1 = 1/T 1 ). Notably, the LiTFSI:PYR (1:2) sample shows distinct behavior across both techniques, exhibiting enhanced relaxation rates and lower self-diffusion for 1 H compared to the other nuclei ( 19 F and 7 Li), suggestive of stronger and more efficient Li + –pyrazole interactions, as confirmed by the modeling of the relaxation profiles. Our study advances understanding of ion dynamics in azole-based eutectic solvents, supporting their potential use in safer battery electrolytes.

FFC-NMR↗

Temporal evolution of whistler growth in a cold plasma injection experiment

The evolution of whistler mode turbulence and particle participation in a cold plasma release are studied experimentally as part of the Active Magnetospheric Particle Tracers Explorer (AMPTE) program. The investigation used a simple time dependent cold plasma density model, and an atypical ambient radiation belt was assumed. It is shown that a cold lithium injection in the AMPTE parameter range can give rise to whistler mode turbulence with significant gain to the wave amplitude in a single pass through a flux tube. Whistler mode growth results in the pitch angle diffusion of energetic electrons, which are in turn precipitated. The rate of power input into the ionosphere from these precipitating electrons is roughly estimated at 2 ergs per sq cm/s. It is found that this value of the precipitated power is large enough to continue producing a visible aurora until the injected plasma in the flux tube is lost or destroyed by magnetospheric convection or other processes.

Ganguli, G.↗

Chemisorption of polysulfides through redox reactions with organic molecules for lithium–sulfur batteries

Lithium-sulfur battery possesses high energy density but suffers from severe capacity fading due to the dissolution of lithium polysulfides. Novel design and mechanisms to encapsulate lithium polysulfides are greatly desired by high-performance lithium-sulfur batteries towards practical applications. Herein, we report a strategy of utilizing anthraquinone, a natural abundant organic molecule, to suppress dissolution and diffusion of polysulfides species through redox reactions during cycling. The keto groups of anthraquinone play a critical role in forming strong Lewis acid-based chemical bonding. This mechanism leads to a long cycling stability of sulfur-based electrodes. With a high sulfur content of ~73%, a low capacity decay of 0.019% per cycle for 300 cycles and retention of 81.7% over 500 cycles at 0.5 C rate can be achieved. Here, this finding and understanding paves an alternative avenue for the future design of sulfur-based cathodes toward the practical application of lithium-sulfur batteries.

25 ENERGY STORAGE↗

Lithium Intercalation in Anatase Titanium Vacancies and the Role of Local Anionic Environment

The structure of bulk and nondefective compounds is generally described with crystal models built from well mastered techniques such the analysis of an X-ray diffractogram. The presence of defects, such as cationic vacancies, locally disrupt the long-range order, with the appearance of local structures with order extending only a few nanometers. To probe and describe the electrochemical properties of cation-deficient anatase, we investigated a series of materials having different concentrations of vacancies, i.e., Ti 1–x–y $\square$ x+y O 2–4(x+y) F 4x (OH) 4y , and compared their properties with respect to defect-free stoichiometric anatase TiO2. At first, we characterized the series of materials Ti 1–x–y $\square$ x+y O 2–4(x+y) F 4x (OH) 4y by means of pair distribution function (PDF), 19 F nuclear magnetic resonance (NMR), Raman and X-ray photoelectron spectroscopies, to probe the compositional and structural features. Second, we characterized the insertion electrochemical properties vs metallic lithium where we emphasized the beneficial role of the vacancies on the cyclability of the electrode under high C-rate, with performances scaling with the concentration of vacancies. The improved properties were explained by the change of the lithium insertion mechanism due to the presence of the vacancies, which act as host sites and suppress the phase transition typically observed in pure TiO 2 , and further favor diffusive transport of lithium within the structure. NMR spectroscopy performed on lithiated samples provides evidence for the insertion of lithium in vacancies. By combining electrochemistry and DFT-calculations, we characterized the electrochemical signatures of the lithium insertion in the vacancies. Importantly, we found that the insertion voltage largely depends on the local anionic environment of the vacancy with a fluoride and hydroxide-rich environments, yielding high and low insertion voltages, respectively. Lastly, this work further supports the beneficial use of defects engineering in electrodes for batteries and provides new fundamental knowledge in the insertion chemistry of cationic vacancies as host sites.

36 MATERIALS SCIENCE↗

Damage and recovery characteristics of lithium-containing solar cells.

Damage and recovery characteristics were measured on lithium-containing solar cells irradiated by 1-MeV electrons. Empirical expressions for cell recovery time, diffusion-length damage coefficient immediately after irradiation, and diffusion-length damage coefficient after recovery were derived using results of short-circuit current, diffusion-length, and reverse-bias capacitance measurements. The damage coefficients were expressed in terms of a single lithium density parameter, the lithium gradient. A fluence dependence was also established, this dependence being the same for both the immediate-post-irradiation and post-recovery cases. Cell recovery rates were found to increase linearly with lithium gradient.

Faith, T. J.↗

Bilayer hybrid graphite anodes via freeze tape casting for extreme fast charging applications

Extreme fast charging (XFC) of lithium-ion batteries is critical for continuous market adoption of electric vehicles. However, mass transport limitations and sluggish kinetics lead to lithium plating in graphite anodes under fast charging conditions. One approach to address the mass transport limitation in graphite is to design low-tortuosity electrodes to enhance ionic transport. In this study, a bilayer hybrid structured electrode with directionally aligned channels was developed via freeze tape casting, which enables faster lithium ion diffusion through the graphite electrode. A scalable roll-to-roll process was designed in which slurry can be cast on any substrates for simple processing. Additionally, electrochemical impedance spectroscopy measurements indicated that the bilayer hybrid coating had both low tortuosity and short diffusion pathways, enabling XFC charging. Rate testing for the bilayer hybrid electrode indicated superior performance over the other coatings, exhibiting a ~20% improvement in the charge capacity compared with the conventional coating at 5C and 10 min total charging time. The bilayer hybrid electrode also demonstrated a 10% improvement in capacity retention compared with the conventional electrode after 1000 cycles at XFC conditions. This study demonstrates freeze tape casting as a scalable way to fabricate low-tortuosity electrodes for XFC applications.

25 ENERGY STORAGE↗

Graphite Lithiation under Fast Charging Conditions: Atomistic Modeling Insights

The charging of lithium ion batteries in a fast and safe manner is critical for promoting the mass adoption of electric vehicles. Li intercalation in graphite electrodes is known to be one of the bottlenecks during the fast charging process. The mechanism of Li diffusion in highly polarized graphite anode at high current rates remains, however, not well understood. In this work, Density Functional Theory (DFT) calculations are used to gain insights into the Li diffusion process in graphite when it is far from equilibrium under fast charging conditions. The effect of uncompensated charges on Li mobility is determined in the highly polarized regions of the anode close to the interfaces. The extra charge was found to increase the interlayer spacing in the diffusion layer and adjacent channels, increasing the diffusivity and promoting the formation of Li clusters. A concerted diffusion mechanism at the edge of high-concentration Li domains is proposed to enhance the diffusion of Li.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗