Search NASA⌕ Search

SEARCH · Search NASA

Results for “matrix sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Methodology for Generating Covariance Data of Thermal Neutron Scattering Cross Sections

This paper details and implements a framework for evaluating thermal neutron scattering cross sections that provide S(α,β) data and covariance data for hydrogen in light water. This methodology involves perturbing model parameters of molecular dynamics potentials and fitting the simulation results to experimental data. The framework is general and can be applied to any material or simulation method. The fit is made using the Unified Monte Carlo method to experimentally measure double-differential scattering cross sections of light water at the Spallation Neutron Source at Oak Ridge National Laboratory. Mean values and covariance data were generated for model parameters, phonon density of states, double-differential cross sections, and total scattering cross sections. These posterior parameter values were very similar to their prior values with a maximum relative error of 0.54%. This falls within in the Unified Monte Carlo–calculated uncertainties on the order of 2.7%. Additionally, posterior double-differential cross sections agree favorably with ENDF/B-VIII.0 cross sections. The new thermal scattering law was tested by comparing it against benchmarks from the International Criticality Safety Benchmark Evaluation Project Handbook, which showed a slight improvement over the ENDF/B-VIII.0 library. Additionally, the covariance matrix of the phonon density of states was validated to confirm that the spread of k eff from the density of states used to generate the covariance matrix was similar to the spread of k eff from the density of states of the sampled covariance matrix.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Rb-Sr systematics for chemically defined Apollo 15 and 16 materials

Concentrations of Rb and Sr and the Sr87/86 ratios are determined in a large number of Apollo 15 samples, including KREEP basalts, mare basalts, anorthosite breccia clasts, lithic fragments, a spinel-bearing clast, green glass samples, breccia matrix, and soils. Relative concentrations of Sm, Eu, Rb, and Sr are also examined in the samples, with particular attention to Rb/Sr systematics vs other trace element abundances and total chemical compositions of rocks. Analysis of crystalline KREEP samples rich in trace elements indicates that the differentiation of these rocks has extended to -4.25 AE age, a significantly later time than the presumed time of accretion of the moon.

Nyquist, L. E.↗

Statistics for characterizing data on the periphery

We introduce a class of statistics for characterizing the periphery of a distribution, and show that these statistics are particularly valuable for problems in target detection. Because so many detection algorithms are rooted in Gaussian statistics, we concentrate on ellipsoidal models of high-dimensional data distributions (that is to say: covariance matrices), but we recommend several alternatives to the sample covariance matrix that more efficiently model the periphery of a distribution, and can more effectively detect anomalous data samples.

97 MATHEMATICS AND COMPUTING↗

Stand Alone Electrical Equipment PRL 227a (Formerly PRL 227 LOC3) Confirmatory Sampling Report Addendum

HydroGeoLogic, Inc. (HGL) prepared this Confirmatory Sampling Report Addendum (CSRA) for the National Aeronautics and Space Administration (NASA), Kennedy Space Center (KSC), Florida. PRL 227a Location of Concern (LOC) 3 is located on 10th Street, west of the former Vertical Processing Facility (M7-1469), SWMU 077. The Load Break Switches (LBS) were installed in 1986 and are suspected to have formerly contained dielectric fluid that contained polychlorinated biphenyls (PCBs). The LBS were replaced in 1993 with new LBSs that do not contain PCBs. The LBS are located on a concrete pad surrounded by grass that is mowed and maintained. A total of 330 soil samples were collected between June 2020 and December 2022 from 88 locations at depths ranging from 0-0.5 to 19-20 ft bls. In general, soil samples collected from depths less than 5 ft were collected via hand auger and samples collected beyond 5 ft bls were collected using a direct-push technology drill rig. Soil samples collected from greater than 5 ft bls to 20 ft bls were collected to confirm PCBs were not present at depth in the aquifer matrix. Delineation samples were collected using an approximately 20 ft horizontal spacing. PCB impacted soil has been completely delineated to the State of Florida residential soil cleanup target level (SCTL) at PRL 227a horizontally and vertically. PCB concentrations have been identified above the residential and industrial SCTL as well as concentrations greater than or equal to 50 ppm requiring coordination with EPA and disposal at a facility authorized under TSCA. Based upon the CSRA sampling, an interim measure is recommended to remove PCB impacted soil above the residential SCTL. The total volume of PCB impacted soil to be removed is 591.6 cubic yards. This includes approximately 9.3 cubic yards of soil with PCB concentrations greater than or equal to 50 ppm. An interim measure work plan is included as an attachment to this report.

electrical equipment↗

Development of Standards for NanoSIMS Analyses of Biological Materials

NanoSIMS is a powerful analytical technique for investigating element distributions at the nanometer scale, but quantifying elemental abundances requires appropriate standards, which are not readily available for biological materials. Standards for trace element analyses have been extensively developed for secondary ion mass spectrometry (SIMS) in the semiconductor industry and in the geological sciences. The three primary approaches for generating standards for SIMS are: (1) ion implantation (2) using previously characterized natural materials, and (3) preparing synthetic substances. Ion implantation is a reliable method for generating trace element standards, but it is expensive, which limits investigation of the analytical issues discussed above. It also requires low background levels of the elements of interest. Finding or making standard materials has the potential to provide more flexibility than ion implantation, but realizing homogeneity at the nano-scale is in itself a significant challenge. In this study, we experiment with all three approaches, but with an emphasis toward synthetic organic polymers in order to reduce costs, increase flexibility, and achieve a wide dynamic concentration range. This emphasis serves to meet the major challenge for biological samples of identifying matrix matched, homogeneous material. Biological samples themselves are typically heterogeneous at the scale of microns to 100s of microns, and therefore they are poor SIMS standards. Therefore, we focused on identifying 'biological-like' materials--either natural or synthetic--that can be used for standards. The primary criterion is that the material be as compositionally similar to biological samples as possible (primarily C, H, O, and N). For natural material we adsorbed organic colloids consisting of peptidoglycan (i.e., amino sugars), activated charcoal, and humic acids. Experiments conducted with Si on peptidoglycan showed low affinity as SiO{sub 2}, yet its distribution in the matrix was similar to that observed in spores. In experiments with Mo on humic acid, homogeneity was achieved and a sensitivity factor relative to C was determined. For synthetic material, we successfully prepared polyacrylic acid containing complexed elements of Mo, Ca, Sr, and Ba at low abundance. These were prepared as aqueous mixtures of dissolved elements and polyacrylic resin, followed by thin film drying. The Mo was homogeneously distributed and yielded a relative sensitivity factor nearly identical to that calculated for humic acid. This approach shows great promise for most water soluble metals. Poly(methacrylate) thin films were prepared that contained different low-level concentrations of Si introduced as a silane compound. Although homogeneity was not fully achieved, the analytical results did validate our previous quantitative methodology for Si. In addition, Commercial plastics were also examined for suitability for F and Cl. We found food-grade polyvinyl tubing produced high precision Cl determinations. For ion implantation, we used epoxy as the substrate and successfully extracted depth profiles and sensitivity factors for F and Cu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Magnetic Properties of Nanowires of Iron Group Metals Produced by Matrix Synthesis

Abstract—Samples of arrays of nanowires are produced from iron, iron–cobalt and iron–nickel alloys via matrix synthesis based on polymer track membranes with pore diameters ranging from 30 to 300 nm. The influence of stress and pore diameter on the galvanic process and structure of nanowires is studied. The arrays of nanowires are examined by microscopy and X-ray diffraction. The magnetic properties are inspected via magnetometry and Mössbauer spectroscopy. The angular dependences of hysteresis loop shape are obtained and comprehensively discussed. As shown, decreasing the growth stress and/or increasing the pore diameter make the Mössbauer spectra of nanowires similar to those of bulk materials. Furthermore, the higher the growth stress is, the larger is the coercive force of nanowires. For the studied species of nanomaterials, the ability to control the magnetic properties during the synthesis is shown, as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DESI DR2 Baryon Acoustic Oscillations from the Lyman Alpha Forest Multipoles

We present an alternative measurement of the Baryon Acoustic Oscillation (BAO) using the Legendre multipole representation of the Ly$α$ forest correlation functions from the second data release (DR2) of the Dark Energy Spectroscopic Instrument survey. Compressing the auto- and cross-correlation functions into Legendre multipoles yields a positive-definite covariance matrix without any smoothing -- unlike the baseline DR2 analysis -- thanks to a significantly reduced data vector size. We introduce the statistical corrections required to debias the finite-sample covariance matrix estimate and demonstrate that monopole and quadrupole terms for both auto- and cross-correlations can be used even when the correlation functions are distorted by continuum errors and contaminated by metals. This formalism has slightly diminished the constraining power of the BAO scale, while considerably weakening constraints on nuisance parameters. We measure the isotropic BAO scale with $0.93\%$ precision at $z_\mathrm{eff}=2.35$, the Hubble parameter $H(z_\mathrm{eff})=(239.5\pm3.4)~(147.09~\mathrm{Mpc}/r_d) ~\mathrm{km~s}^{-1}~\text{Mpc}^{-1}$, and the transverse comoving distance $D_M(z_\mathrm{eff})=(5.80 \pm 0.10)~(r_d/147.09~\mathrm{Mpc})$~Gpc for a given value of the sound horizon ($r_d$). Our BAO results are entirely consistent with the baseline DR2 analysis.

Karaçaylı, Naim Göksel [Chicago U., KICP; Ohio Sta↗

Rapid prediction of fuel research octane number and octane sensitivity using the AFIDA constant-volume combustion chamber

Current research octane number (RON) and motor octane number (MON) gasoline performance characterization techniques use dated, complex engine testing methodology and limit researchers’ ability to easily characterize small volumes of experimental fuels. A novel methodology is presented that correlates measured ignition delay (ID) time to RON in an Advanced Fuel Ignition Delay Analyzer (AFIDA) constant-volume combustion chamber device at a single pressure/temperature condition, with an r2 of 0.99 and standard error (SE) of 1.0. The correlation of the slope of the ID time between two additional temperature points to octane sensitivity (S) produces an r2 of 0.97 and SE of 0.69; however, fuels with S>12 are indistinguishable. These results are based on methodology calibration using 31 primary and toluene reference fuels containing 0%-40% ethanol with RON values ranging from 85 to 113. Validation of these methods using a 102-sample fuel matrix spanning an array of base fuels and additive chemistry designed to test the robust applicability of the method, along with pump gasoline and high-octane surrogate blend samples, demonstrates an r2 of 0.94 and SE of 1.3 for the RON correlation over all samples, whereas the equivalent S correlation produces an r2 of 0.78 and SE of 1.2 by excluding two additives, 3-pentanone and diisobutylene, which displayed poor S correlation results. This novel AFIDA analysis method can be performed in 1 h and with 40 mL of fuel, offering significant improvements in time and volume requirements over traditional techniques.

33 ADVANCED PROPULSION SYSTEMS↗

Strontium and oxygen isotope study of M-1, M-3 and M-4 drill core samples from the Manson impact structure, Iowa: Comparison with Haitian K-T impact glasses

Strontium and oxygen isotope analyses were performed on 8 samples from the M-1, M-3, and M-4 cores recently drilled at the Manson impact structure. The samples were three elastic sedimentary rocks (of probable Cretaceous age) which occurred as clasts within the sedimentary clast breccia, two samples of crystalline rock breccia matrix, and three samples of dolomite and limestone. The Sr-87/Sr-86 (corrected to 65 Ma) ratios were much higher than those in impact glasses from the Haitian Cretaceous-Tertiary (K-T) boundary. Isotope mixing calculations demonstrate that neither the silicate or carbonate rocks analyzed from the Manson crater, or mixtures of these rocks are appropriate source materials for the Haitian impact glasses. However, the Sr-87/Sr-86 (65Ma) ratio and delta O-18 value of the Ca-rich Haitian glasses are well reproduced by mixtures of Si-rich Haitian glass with platform carbonate of K-T age.

Blum, Joel D.↗

Apollo 16 white boulder consortium samples 67455 and 67475 - Petrologic investigation

The paper describes Apollo 16 samples 67455 and 67475 from a white boulder which seems to be an ejecta block that represents a major lithology of the ejecta stratigraphic section penetrated by the North Ray cratering event. The characteristics of 67455, a polymict white feldspathic impact ejecta breccia, might possibly indicate that this and other samples from near the North Ray Crater rim come from a different source area or at least a different part of the same source area than do other Apollo 16 light matrix breccias. Sample 67475 is an impact melt probably produced by the same event that produced 67455. The transport of this assemblage and the relation of the white boulder to ejecta from the Nectaris event are considered.

Minkin, J. A.↗

Statistical analysis of effective singular values in matrix rank determination

A major problem in using SVD (singular-value decomposition) as a tool in determining the effective rank of a perturbed matrix is that of distinguishing between significantly small and significantly large singular values to the end, conference regions are derived for the perturbed singular values of matrices with noisy observation data. The analysis is based on the theories of perturbations of singular values and statistical significance test. Threshold bounds for perturbation due to finite-precision and i.i.d. random models are evaluated. In random models, the threshold bounds depend on the dimension of the matrix, the noisy variance, and predefined statistical level of significance. Results applied to the problem of determining the effective order of a linear autoregressive system from the approximate rank of a sample autocorrelation matrix are considered. Various numerical examples illustrating the usefulness of these bounds and comparisons to other previously known approaches are given.

Konstantinides, Konstantinos↗

Solid matrix transformation and tracer addition using molten ammonium bifluoride salt as a sample preparation method for laser ablation inductively coupled plasma mass spectrometry

Solid sampling and analysis methods, such as laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), are challenged by matrix effects and calibration difficulties. Matrix-matched standards for external calibration are seldom available and it is difficult to distribute spikes evenly into a solid matrix as internal standards. While isotopic ratios of the same element can be measured to high precision, matrix-dependent effects in the sampling and analysis process frustrate accurate quantification and elemental ratio determinations. Here we introduce a potentially general solid matrix transformation approach entailing chemical reactions in molten ammonium bifluoride (ABF) salt that enables the introduction of spikes as tracers or internal standards. Proof of principle experiments show that the decomposition of uranium ore in sealed PFA fluoropolymer vials at 230 °C yields, after cooling, new solids suitable for direct solid sampling by LA. When spikes are included in the molten salt reaction, subsequent LA-ICP-MS sampling at several spots indicate that the spikes are evenly distributed, and that U-235 tracer dramatically improves reproducibility in U-238 analysis. Precisions improved from 17% relative standard deviation for U-238 signals to 0.1% for the ratio of sample U-238 to spiked U-235, a factor of over two orders of magnitude. These results introduce the concept of solid matrix transformation (SMT) using ABF, and provide proof of principle for a new method of incorporating internal standards into a solid for LA-ICP-MS. This new approach, SMT-LA-ICP-MS, provides opportunities to improve calibration and quantification in solids based analysis. Finally, looking forward, tracer addition to transformed solids opens up LA-based methods to analytical methodologies such as standard addition, isotope dilution, preparation of matrix-matched solid standards, external calibration, and monitoring instrument drift against external calibration standard

47 OTHER INSTRUMENTATION↗

Oxidation of Matrix Material in Helium with Varied Moisture Content

Exploration of the oxidation behavior of matrix material from tristructural-isotropic (TRISO) coated particle fuel elements in moisture environments provides critical data needed to predict the material’s response during off-normal accident scenarios. Near-representative, matrix-only samples were fabricated to facilitate oxidation testing in varied moisture concentrations. Oxidation testing was completed over a range of temperatures and oxidizing environments to obtain the relevant oxidation kinetics parameters and empirical oxidation rates necessary to better predict and understand matrix oxidation behavior at relevant conditions. The acquired oxidations rates were fit to established models for steam oxidation of nuclear graphite, and data were acquired following an established process. The data showed good agreement over conditions typical of the kinetic regime, and they showed a departure from the kinetic model fit at elevated temperatures and steam partial pressures in helium carrier gas. The departure was confirmed to be due to the experimental conditions being beyond the kinetic regime based on destructive analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Origin of “memory glass” effect in pressure-amorphized rare-earth molybdate single crystals

The memory glass effect (MGE) describes the ability of some materials to recover the initial structure and crystallographic orientation after pressure-induced amorphization (PIA). In spite of numerous studies the nature and underlying mechanisms of this phenomenon are still not clear. Here we report investigations of MGE in β′-Eu{sub 2}(MoO{sub 4}){sub 3} single crystal samples subjected to high pressure amorphization. Using the XRD and TEM techniques we carried out detailed analysis of the structural state of high pressure treated single crystal samples as well as structural transformations due to subsequent annealing at atmospheric pressure. The structure of the sample has been found to be complex, mainly amorphous, however, the amorphous medium contains evenly distributed nanosize inclusions of a paracrystalline phase. The inclusions are highly correlated in orientation and act as “memory units” in the MGE. - Graphical abstract: Schematic representation of pressure-induced amorphization and “memory glass” effect in rare-earth molybdate single crystals. The XRD and TEM measurements have revealed the presence of the residual identically oriented paracrystalline nanodomains in the pressure-amorphized state. These domains preserve the information about initial structure and orientation of the sample. They act as memory units and crystalline seeds during transformation of the amorphous phase back to the starting single crystalline one. - Highlights: • Pressure-amorphized Eu{sub 2}(MoO4){sub 3} single crystals were studied ex-situ by XRD and TEM. • Tiny residual crystalline inclusions were found in amorphous matrix of sample. • The inclusions keep in memory the parent crystal structure and orientation. • The inclusions account for “memory glass” effect in rare-earth molibdates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sampling-based Sublinear Low-rank Matrix Arithmetic Framework for Dequantizing Quantum Machine Learning

We present an algorithmic framework for quantum-inspired classical algorithms on close-to-low-rank matrices, generalizing the series of results started by Tang’s breakthrough quantum-inspired algorithm for recommendation systems [STOC’19]. Motivated by quantum linear algebra algorithms and the quantum singular value transformation (SVT) framework of Gilyén et al. [STOC’19], we develop classical algorithms for SVT that run in time independent of input dimension, under suitable quantum-inspired sampling assumptions. Our results give compelling evidence that in the corresponding QRAM data structure input model, quantum SVT does not yield exponential quantum speedups. Since the quantum SVT framework generalizes essentially all known techniques for quantum linear algebra, our results, combined with sampling lemmas from previous work, suffice to generalize all prior results about dequantizing quantum machine learning algorithms. In particular, our classical SVT framework recovers and often improves the dequantization results on recommendation systems, principal component analysis, supervised clustering, support vector machines, low-rank regression, and semidefinite program solving. We also give additional dequantization results on low-rank Hamiltonian simulation and discriminant analysis. Our improvements come from identifying the key feature of the quantum-inspired input model that is at the core of all prior quantum-inspired results: ℓ 2 -norm sampling can approximate matrix products in time independent of their dimension. We reduce all our main results to this fact, making our exposition concise, self-contained, and intuitive.

Computer Science↗

Suppressing η-phase development in steel-cemented tungsten carbide: A spark plasma sintering study

We describe the phase stability of a cemented tungsten carbide prepared using a high-vanadium tool steel as the cementing/binder phase and confirm suppression of (Fe, W) 6 C η-phase formation, attributed to the preferential formation of a V 0.78 W 0.22 C 1-x phase that exists as islands within the Fe-rich binder matrix. The samples were prepared using spark plasma sintering (SPS), starting from commercially available WC and A11-LVC tool steel powders. The starting powders were ball milled adding 10, 15, and 20 vol.% steel. An A11-LVC tool steel was chosen as a low-cost hard steel (49 HRC) that does not contain Ni or Co but has a high vanadium (~9 wt.%) and carbon (~1.75 wt.%) content. Our results show that sintering by SPS can produce high-density (>98%) WC-steel specimens in which the matrix wets the WC grain surfaces and formation of the brittle η-phase is avoided. The η phase is often regarded as embrittling and undesirable, and its presence can result in degradation of mechanical properties. Microhardness values for the WC-10 and WC-15 vol.% steel samples were 12.3 ± 1.2 and 13.0 ± 0.9 GPa, respectively, whereas the fracture toughness values were 8.83 ± 0.48 and 8.81 ± 0.61 MPa·m 1/2 , respectively.

36 MATERIALS SCIENCE↗

Excess Conductivity Investigation of Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18±δ} Superconductors Prepared by Various Parameters of Planetary Ball Milling Technique

Superconducting samples of type Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18±δ} were elaborated by using a planetary high-energy ball milling (HEBM) technique with various parameters. Phases, microstructure, and superconductivity have been examined using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and electrical resistivity measurements. SEM investigation shows the occurrence of nanoentities embedded into the superconducting matrix for samples prepared by a ball milling technique. The main objective of this study is to investigate the influence of ball milling parameters on the fluctuation-induced conductivity (FIC). The electrical resistivity versus temperature, ρ(T), above T{sub c} was analyzed using Lawrence–Doniach (LD) and Aslamazov–Larkin (AL) models. Different fluctuation regimes indicated by short-wave fluctuation (SWF) and three-dimensional (3D), two-dimensional (2D), one-dimensional (1D), and critical region (CR) fluctuations were identified. The coherence length at zero temperature, the effective layer thickness, the critical magnetic fields, and the critical current densities are determined. The superconducting parameters strongly depend on the planetary ball milling technique, and the results are explained in relevancy to the microstructure. It was found that the achievement of a microstructure with well-dispersed nanoentities is an effective way for introducing pinning centers for enhancing critical current density and flux pinning capability of bulk Y-358.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of thermal stresses in polymer matrix composites

In the present micromechanics study of the thermally-induced stress field which emerges at very low temperatures in the matrix and fibers of continuous fiber-reinforced polymer composites, the results obtained by a specialized FEM analysis are compared to an analytical solution of the composite cylinder model for several composite materials. Attention is given to the influence of microstructural geometry and constituent properties; it is established that the distributions and magnitudes of the thermally-induced stresses are affected by the assumed microstructural geometry of the sample. While matrix stresses are not a strong function of fiber properties, the temperature dependence of the matrix properties significantly affects the magnitudes of thermally-induced matrix stresses.

Bowles, David E.↗