Search NASA⌕ Search

SEARCH · Search NASA

Results for “melt growth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Growth of GaAs from a free surface melt under controlled arsenic pressure in a partially confined configuration

A partially confined configuration for the growth of GaAs from melt in space was developed, consisting of a triangular prism containing the seed crystal and source material in the form of a rod. It is suggested that the configuration overcomes two obstacles in the growth of GaAs in space: total confinement in a quartz crucible and lack of arsenic pressure control. Ground tests of the configuration show that it is capable of crystal growth in space and is useful for studying the growth of GaAs from a free-surface melt on earth. The resulting chemical composition, electrical property variations, and phenomenological models to account for the results are presented.

Gatos, H. C.↗
NASA NTRS1987

Analysis of the fluid dynamics and heat transfer during micro-gravity Bridgman-Stockbarger growth of semiconductors in steady periodic gravitational fields

The effect of periodic variations in the magnitude and direction of gravitational acceleration on buoyancy-driven convection in the melt during microgravity growth of low Prandtl number semiconductor materials in Brigdman-Stockbarger configuration is investigated through the numerical solution of the transient Navier-Stokes and energy equations. Results are presented over a wide range of Rayleigh numbers and frequency spectrum of periodic g-level variations corresponding to conditions present on earth and on board spacecrafts. The frequency response of convection in the melt during growth is found to be similar to that of a first order dynamic system with a cutoff frequency determined by the diffusion of momentum in the system. Results indicate that during growth of small diameter Germanium crystals, convection in the melt is insensitive to the measured g-gitter on board the shuttle.

Griffin, Patrick R.↗
NASA NTRS1982

Segregation effects during growth of pseudo-binary system with large liquidus-solidus separation

Results are reported for an experimental study of the seeded growth, of PbSnTe single crystals in a vertical Bridgman-Stockbarger (B-S) furnace. Profiles of axial and radial segregation of Sn are presented for crystal growth from melts with aspect ratios of 15 and 6.8; the profiles indicate intense convective mixing. A one-dimensional model of heat and mass transfer in an idealized B-S furnace with diffusion control is used to examine the importance of liquidus-solidus separation in determining growth-rate and composition transients in a pseudobinary system. It is shown that the coupling of heat and mass transfer in a pseudobinary system with a large liquidus-solidus separation causes the transient behavior in a nondilute system to differ markedly from such behavior in a dilute system and that PbSnTe crystals with a reasonable diameter can be grown under nearly convectionless conditions in a microgravity environment.

Bourret, E. D.↗
NASA NTRS1981

Large area sheet task: Advanced Dendritic Web Growth Development

A melt level control system was implemented to provide stepless silicon feed rates from zero to rates exactly matching the silicon consumed during web growth. Bench tests of the unit were successfully completed and the system mounted in a web furnace for operational verification. Tests of long term temperature drift correction techniques were made; web width monitoring seems most appropriate for feedback purposes. A system to program the initiation of the web growth cycle was successfully tested. A low cost temperature controller was tested which functions as well as units four times as expensive.

Duncan, C. S.↗
NASA NTRS1995

Thermal Characterization of the Universal Multizone Crystallizator

The Universal Multizone Crystallizator (UMC) is a special apparatus for crystal growth under terrestrial and microgravity conditions. The use of twenty-five zones allows the, UMC to be used for several normal freezing growth techniques. The thermal profile is electronically translated along the stationary sample by systematically reducing the power to the control zones. Elimination of mechanical translation devices increases the systems reliability while simultaneously reducing the size and weight. This paper addresses the UMC furnace design, sample cartridge, typical thermal profiles and corresponding power requirements necessary for two normal freezing techniques: dynamic gradient freeze and zone melting crystal growth.

Watring, D. A.↗
NASA NTRS1993

Convection effects on radial segregation and crystal melt interface in vertical Bridgman growth

We analytically study the influence of convection caused by horizontal heat transfer through the sides of a vertical Bridgman apparatus. We consider the case when the heat transfer across the side walls is small so that the resulting interfacial deformation and fluid velocities are also small. This allows us to linearize the Navier-Stokes equations and express the interfacial conditions about a planar interface through a Taylor expansion. Using a no tangential stress conditions on the side walls, asymptotic expressions for both the interfacial slope, and radial segregation at the crystal-melt interface are obtained in closed form in the limit of large thermal Rayleigh number. It is suggested that these can be reduced by appropriately controlling a specific heat transfer property at the edge of the insulation zone in the solid side.

Tanveer, S.↗
DOE OSTI2020

On Simulating the Formation of Structured, Crystalline Systems via Non-classical Pathways

Observations in crystal growth and assembly from recent in situ methods suggest alternative, non-classical crystallization pathways play an important role in the determination of the micro- and meso- structures in crystalline systems. These processes display parallels that cross-cut multiple disciplines investigating crystallization across four orders of magnitude in size scales and widely differing environments, hinting that alternative crystal growth pathways may be a fundamental scheme in natural crystal formation. Using a system of short-range attractive microbeads, we demonstrate that the addition of a small concentration of sub-species incommensurate with the lattice spacing of the dominant species results in a stark change in crystal size and morphology. These changes are attributed to the presence of fleeting, amorphous-like configurations of beads that ultimately change the melting and growth dynamics in preferred directions. From these real-time observations, we hypothesize the amorphous mineral precursors present in biological mineralized tissues undergo similar non-classical crystallization processes resulting in the complex structures found in biomineralization.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Century/millennium internal climate oscillations in an ocean-atmosphere-continental ice sheet model

We demonstrate in a simple climate model that there exist nonlinear feedbacks between the atmosphere, ocean, and ice sheets capable of producing century/millennium timescale internal oscillations resembling those seen in the paleoclimate record. Feedbacks involve meridional heat and salt transports in the North Atlantic, surface ocean freshwater fluxes associated with melting and growing continental ice sheets in the northen hemisphere and with Atlantic to Pacific water vapor transport. The positive feedback between the production of North Atlantic Deep Water (NADW) and the meridional salt transport by the Atlantic thermohaline circulation tends to destabilize the climate system, while the negative feedback between the freshwater flux, either to or from the continental ice sheets, and meridional heat flux to the high-latitude North Atlantic, accomplished by the thermohaline circulation, stabilizes the system. The thermohaline circulation plays a central role in both positive and negative feedbacks because of its transport of both heat and salt. Because of asymmetries between the growth and melt phases the oscillations are, in general, accompanied by a growing or decreasing ice volume over each cycle, which in the model is reflected by increasing or decreasing mean salinity.

Birchfield, Edward G.↗
NASA NTRS2017

The Effect of Firn-Aquifer Drainage on the Greenland Subglacial System or Subglacial Efficiency and Storage Modified by the Temporal Pattern of High-Elevation Meltwater Input

Ice flow in marginal region of the Greenland Ice Sheet dynamically responds to summer melting as surface meltwater is routed through the supraglacial hydrologic system to the bed of the ice sheet via crevasses and moulins. Given the expected increases in surface melt production and extent, and the potential for high elevation surface-to-bed connections, it is imperative to understand how meltwater delivered to the bed from different high-elevation supraglacial storage features affects the evolution of the subglacial hydrologic system and associated ice dynamics. Here, we use the two-dimensional subglacial hydrologic model, GLaDS, which includes distributed and channelized water flow, to test how the subglacial system of an idealized outlet glacier responds to cases of high-elevation firn-aquifer-type and supraglacial-lake-type englacial drainage over the course of 5 years. Model outputs driven by these high elevation drainage types are compared to steady-state model results, where the subglacial system only receives the 1980- 2016 mean MERRA-2 runoff via low-elevation moulins. Across all experiments, the subglacial hydrologic system displays inter-annual memory, resulting in multiyear declines in subglacial pressure during the onset of seasonal melting and growth of subglacial channels. The gradual addition of water in firn-aquifer-type drainage scenarios resulted in small increases in subglacial water storage but limited changes in subglacial efficiency and channelization. Rapid, supraglacial- lake-type drainage resulted in short-term local increases in subglacial water pressure and storage, which gave way to spatially extensive decreases in subglacial pressure and downstream channelization. These preliminary results suggest that the character of high-elevation englacial drainage can have a strong, and possibly outsized, control on subglacial efficiency throughout the ablation zone. Therefore, understanding both how high elevation meltwater is stored supraglacially and the probability of crevassing at high elevations will play an important role in how the subglacial system, proglacial discharge and ice motion will respond to future increases in surface melt production and runoff.

Andrews, Lauren C.↗
NASA NTRS2000

Detached and Floating-Zone Growth of Semiconductor Crystals on the ISS

Understanding the mechanism of detached Bridgman growth and establishing the growth of large scale germanium-silicon crystals by the float-zone technique are the key points of the project "RDGS - Reduction of Defects in Germanium-Silicon". The contact angle of the melt and the growth angle of the crystal are essential parameters which allow a controlled use of detached growth. The contact angle was determined for a variety of different substrates and melt compositions; pBN showed the highest value for pure germanium as well as for germanium-rich GeSi melts. The growth angle of Ge(sub 0.95) Si(sub 0.05) was measured to be 8.5-10.5 degrees which concurs with the values of pure germanium and silicon, respectively. The temperature dependence and the concentration dependence of the surface tension were determined for concentrations up to 10at% silicon (partial derivative (gamma)/partial derivative T=-0.08 (raised dot) 10(exp -3)N/m (raised dot) K, partial derivative (gamma)/partial derivative (C)=2.2 (raised dot) 10(exp -3)N/m (raised dot) at%). Using these values, the critical Marangoni number indicating the transition to time-dependent thermocapillary flow will be exceeded for the growth of large scale float-zone crystals onboard the ISS. Therefore, suitable tools for flow control are required.

Dold, P.↗
NASA NTRS1970

Preliminary terrestrial based experiments on gravity-affected crystal growth

Tin was melted in a heating assembly secured to the arm of a centrifuge. The furnace was allowed to pivot and reach its equilibrium angle of swing for the gravity force being experienced. The crucible was cooled during rotation to allow the growth of single crystals. The crystals were etched for the purpose of observing the growth striations. Slices were removed from some of the crystals to permit observation of the striations in the interior. Visual analyses were made with a scanning electron microscope. Preliminary conclusions relating the appearance of the striations to gravity forces and the affected growth mechanisms are presented. Further experiments that will verify these conclusions and determine other gravity effects are proposed.

Johnston, M. H.↗
DOE OSTI2025

Assessment of critical flaw sizes and crack driving forces during additive manufacturing of metallic materials

Additive manufacturing (AM) of complex engineering components is often plagued by a high susceptibility to cracking, particularly in high-strength metallic materials. While alloy design efforts have made progress in mitigating solidification defects, there remains a need for mechanistic guidelines to predict susceptibility to solid-state cracking. To address this gap, driving forces for the growth of melt pool cracks are calculated across a wide range of alloys using an efficient computational framework. Calculations are coupled with rapid single track laser experiments to elucidate trends in cracking from laser melting. The analyses conducted here highlight the important role of material properties in susceptibility to cracking, notably fracture toughness and elastic modulus. An important finding is that residual stresses that are limited in magnitude to the yield stress of the material are likely insufficient to drive cracking during cooling. Furthermore, the implications of these results are discussed in the context of alloy design for AM and residual stress accumulation during AM.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fabrication of Low-Cost Large-Volume Ceramic A 2 HfX 6 (A= Cs or Tl, X = Cl, Br, or I) Scintillators for Gamma Ray Detection (SBIR Phase I Final Technical Report)

Scintillator crystals play an important role in the radiation detection field. Widespread use of scintillators as gamma-ray detectors is largely generated by their extensive availability and tunable properties, such high light output, high stopping power (Z eff ), fast decay time, and good proportionality. Additionally, the cost for manufacturing a scintillation detector like NaI:Tl is usually considerably lower than the cost for manufacturing a semiconductor detector like CdZnTe. Because there is no such thing as an ideal scintillation material, an application requiring certain detection characteristics may incorporate a scintillator tailored to its specific properties. The vast variety of applications and requirements necessitates more research into new scintillation materials and/or better methods of producing existing materials.The goal of this project was to grow low cost and environmentally stable inorganic transparent ceramic scintillators with excellent gamma ray resolution, excellent energy proportionality, excellent detection efficiency due to high density (>5 g/cm 3 ) and very high Z eff (55-80), and good light yields (>40,000 ph/MeV). In Phase I Xtallized Intelligence, Inc. (XI, Inc) developed a novel ceramic fabrication technique to produce low cost and environmentally stable highly efficient inorganic transparent ceramic scintillators of various dimensions. XI, Inc., collaborating with Fisk University (Fisk), investigated the scintillation properties of these new ceramic scintillators and compared them to in their single crystal counterparts. The results of this Phase I project show that successful production of high-quality inorganic halide ceramic scintillators Cs 2 HfCl 6 (CHC) and Tl 2 HfCl 6 (THC). Both ceramic CHC and THC scintillators have achieved good performance close to the performance of their single crystal counterparts. Fabricating these inorganic ceramic scintillators mitigate many issues encountered during conventional bulk crystal growth by melt methods. Additional benefits of the ceramic fabrication technique include high production yield, low production cost, fast production time, and no material waste Inorganic transparent ceramic scintillators produced in this project will enhance cost effectiveness at the instrument level based on low projected cost of the proposed compounds, as much smaller crystal sizes would be required to achieve similar efficiency as current radioisotope identification devices (RIID’s) used in homeland security applications as well as spectrometers in high energy physics applications.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Ice conditions on the Chesapeake Bay as observed from LANDSAT during the winters of 1977, 1978 and 1979

The LANDSAT observations during the winters of 1977, 1978 and 1979, which were unusually cold in the northeastern U.S. and in the Chesapeake Bay area, were evaluated. Abnormal atmospheric circulation patterns displaced cold polar air to the south, and as a result, the Chesapeake Bay experienced much greater than normal icing conditions during these 3 years. The LANDSAT observations of the Chesapeake Bay area during these winters demonstrate the satellite's capabilities to monitor ice growth and melt, to detect ice motions, and to measure ice extent.

Foster, J. L.↗
NASA NTRS1981

Float Zone Workshop

Presentations made on space based float zone crystal growth and melt behavior are summarized and handouts illustrating the presentations are presented.

E. L. Kern↗
NASA NTRS1983

Materials processing in the reduced-gravity environment of space

Studies of the effects of gravitation on the behavior of fluids and the shapes of materials for the years 1977-1982 are reviewed, with a focus on ground-based research which complements and gives direction to experimentation in the reduced-gravity environment of space. Fluid-behavior topics discussed include crystal growth from melts and from vapor, dendritic solidification and casting, multiphase alloy solidification, electrophoresis, convection behavior, and special heat-flow considerations characteristic of the space environment. With regard to solids, such subjects as containerless positioning technology and its applications (in glass preparation, liquid drop and shell studies, nucleation experiments, and measurements of fundamental properties of molten reactants), liquid floating zones, solid self-deformation, and sedimentation and buoyancy effects are considered and illustrated.

Carruthers, J. R.↗
NASA NTRS1985

Sensitivity of a thermodynamic sea ice model with leads to time step size

The characteristics of sea ice models, developed to study the physics of the growth and melt of ice at the ocean surface and the variations in ice extent, depend on the size of the time step. Thus, to study longer-term variations within a reasonable computer budget, a model with a scheme allowing longer time steps has been constructed. However, the results produced by the model can definitely depend on the length of the time step. The sensitivity of a model to time-step size can be reduced by appropriate approaches. The present investigation is concerned with experiments which use a formulation of a lead parameterization that can be considered as a first step toward the development of a lead parameterization suitable for a use in long-term climate studies.

Ledley, T. S.↗
NASA NTRS1986

The effect of fluid flow due to the crystal-melt density change on the growth of a parabolic isothermal dendrite

The Ivantsov (1947) analysis of an isolated isothermal dendrite (with zero surface tension) growing into a supercooled liquid is extended to include the effects of the fluid flow due to volume contraction or expansion upon solidification. For an axisymmetric paraboloidal dendrite, an analytic solution to the Navier-Stokes equations is obtained. The magnitude of the flow is proportional to the relative density change epsilon, and the flow becomes negligible far from the surface of the dendrite. The temperature field consistent with this flow can also be found explicitly. The well-known expression that relates the dimensionless supercooling to the Peclet number in the absence of fluid flow is modified for nonzero epsilon, but the effect is of order epsilon and hence is seen to be minor for most values of epsilon and dimensionless supercooling that occur in practice.

Mcfadden, G. B.↗