Search NASA⌕ Search

SEARCH · Search NASA

Results for “mesoscale simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A comparison of cloud radiation fields obtained by in-situ aircraft measurements and a numerical simulation of a tropical mesoscale convective system

The radiation budget of a tropical mesoscale convective system (MCS) is investigated by comparing in situ aircraft measurements obtained in a tropical MCS during the Equatorial Mesoscale Experiment (EMEX), and coordinated aircraft radiation measurements, with radiation profiles calculated using cloud properties obtained from a cloud model simulation of a tropical MCS. Preliminary results indicate that the stratiform region of the tropical System B simulation represents the gross properties of the observed stratiform system between 4.5 to 15 km. The flux profiles predicted by the model are consistent with observed fluxes.

Wong, Takmeng↗
NASA NTRS2000

Long-Term Global Morphology of Gravity Wave Activity Using UARS Data

Gravity waves in satellite data from CRISTA and MLS are studied in depth this quarter. Results this quarter are somewhat limited due to the PI'S heavy involvement throughout this reporting period in on-site forecasting of mountain wave-induced turbulence for the NASA's ER-2 research aircraft at Kiruna, Sweden during the SAGE Ill Ozone Loss and Validation Experiment (SOLVE). Results reported concentrate on further mesoscale modeling studies of mountain waves over the southern Andes, evident in CRISTA and MLS data. Two-dimensional mesoscale model simulations are extended through generalization of model equations to include both rotation and a first-order turbulence closure scheme. Results of three experiments are analyzed in depth and submitted for publication. We also commence simulations with a three-dimensional mesoscale model (MM5) and present preliminary results for the CRISTA 1 period near southern South America. Combination of ground-based temperature data at 87 km from two sites with global HRDl data was continued this quarter, showing stationary planetary wave structures. This work was also submitted for publication.

Eckermann, Stephen D.↗
DOE OSTI2021

Modeling the dynamic response of rock masses with multiple compliant fluid saturated joint sets - Part II: Continuum modeling

Part I of this two-part paper describes enhancements of a mesoscale model to include: many non-persistent fluid saturated joints with finite area, normal compliance with hysteresis and the weakening effects of angular deviation in the joint sets and of fluid pressure in the joints. The objective of this Part II is to use the results of the mesoscale model as simulated data to inspire functional forms in a continuum model for rock masses with multiple compliant fluid saturated joint sets which include these enhancements. Also, an algorithm is proposed for reducing the number of joint sets being modeled. Examples are presented here which show that the continuum model can predict similar anisotropic response to that observed in mesoscale simulations. In contrast with the mesoscale model, the continuum model can be used for large scale simulations of real applications, smoothly transitioning from coupled inelastic thermomechanical response near an explosive source to orthotropic elastic response far from the source.

58 GEOSCIENCES↗
NASA NTRS1995

Meso-beta scale numerical simulation studies of terrain-induced jet streak mass/momentum perturbations

Mesoscale model simulations provide insight into the complex jet streak adjustments on 11-12 July 1981 that preceded the first of two significant gravity wave events to have been generated over the Rocky Mountains in Montana. Simulations employing a variety of terrain treatments indicate that prior to wave formation, geostrophic adjustment processes modified the structure of the mid-upper tropospheric jet streak by creating secondary jetlets to the southeast of the polar jet streak in proximity to the gravity wave generation region. This simulated restructuring of the mid-upper tropospheric jet streak is the result of a four stage process. During stage 1, the wind adjusts to the mass field as the jet streak exit region propagates into the inflection point between the upstream trough and downstream ridge in the height field. Stage 2 is initiated as the mass field is forced to adjust to the new ageostrophic wind field created during stage 1. Stage 3 is defined by a second geostrophic adjustment process occurring in a similar manner but to the south and east of the adjustment which occurs during stage 1. A low-level mesoscale jetlet is formed during stage 4 in response to the low-level pressure falls that are established during stage 3. The perturbation of this jetlet, caused by orographically-induced adiabatic and diabatic physical processes, is the likely mechanism responsible for the generation of the first and second episode of observed gravity waves. The dynamics responsible for this wave episode are discussed as differential surface sensible heating inducing an orographically-forced mountain-plains solenoid, resulting in the formation of additional mesoscale jetlets and internal gravity waves. Also discussed is how convective latent heating modifies the numerically simulated terrain-induced internal gravity waves, especially their amplitude and phase velocities, which provide better agreement with those wave characteristics observed in nature. Finally, the three-dimensional linear response of a zonally uniform barotropic flow in a vertically unbounded, continuously stratified, Boussinesq atmosphere which is perturbed from geostrophic equilibrium is investigated.

Lin, Yuh-Lang↗
NASA NTRS1990

Radiatively driven stratosphere-troposphere interactions near the tops of tropical cloud clusters

Results are presented of two numerical simulations of the mechanism involved in the dehydration of air, using the model of Churchill (1988) and Churchill and Houze (1990) which combines the water and ice physics parameterizations and IR and solar-radiation parameterization with a convective adjustment scheme in a kinematic nondynamic framework. One simulation, a cirrus cloud simulation, was to test the Danielsen (1982) hypothesis of a dehydration mechanism for the stratosphere; the other was to simulate the mesoscale updraft in order to test an alternative mechanism for 'freeze-drying' the air. The results show that the physical processes simulated in the mesoscale updraft differ from those in the thin-cirrus simulation. While in the thin-cirrus case, eddy fluxes occur in response to IR radiative destabilization, and, hence, no net transfer occurs between troposphere and stratosphere, the mesosphere updraft case has net upward mass transport into the lower stratosphere.

Churchill, Dean D.↗
NASA NTRS2012

An OSSE on Mesoscale Model Assimilation of Simulated HIRAD-Observed Hurricane Surface Winds

The hazards of landfalling hurricanes are well known, but progress on improving the intensity forecasts of these deadly storms at landfall has been slow. Many cite a lack of high-resolution data sets taken inside the core of a hurricane, and the lack of reliable measurements in extreme conditions near the surface of hurricanes, as possible reasons why even the most state-of-the-art forecasting models cannot seem to forecast intensity changes better. The Hurricane Imaging Radiometer (HIRAD) is a new airborne microwave remote sensor for observing hurricanes, and is operated and researched by NASA Marshall Space Flight Center in partnership with the NOAA Atlantic Oceanographic and Meteorological Laboratory/Hurricane Research Division, the University of Central Florida, the University of Michigan, and the University of Alabama in Huntsville. This instrument?s purpose is to study the wind field of a hurricane, specifically observing surface wind speeds and rain rates, in what has traditionally been the most difficult areas for other instruments to study; the high wind and heavy rain regions. Dr. T. N. Krishnamurti has studied various data assimilation techniques for hurricane and monsoon rain rates, and this study builds off of results obtained from utilizing his style of physical initializations of rainfall observations, but obtaining reliable observations in heavy rain regions has always presented trouble to our research of high-resolution rainfall forecasting. Reliable data from these regions at such a high resolution and wide swath as HIRAD provides is potentially very valuable to mesoscale forecasting of hurricane intensity. This study shows how the data assimilation technique of Ensemble Kalman Filtering (EnKF) in the Weather Research and Forecasting (WRF) model can be used to incorporate wind, and later rain rate, data into a mesoscale model forecast of hurricane intensity. The study makes use of an Observing System Simulation Experiment (OSSE) with a simulated HIRAD dataset sampled during a hurricane and uses EnKF to forecast the track and intensity prediction of the hurricane. Comparisons to truth and error metrics are used to assess the model?s forecast performance.

Albers, Cerese↗
NASA NTRS2013

Genesis of Hurricane Sandy (2012) Simulated with a Global Mesoscale Model

In this study, we investigate the formation predictability of Hurricane Sandy (2012) with a global mesoscale model. We first present five track and intensity forecasts of Sandy initialized at 00Z 22-26 October 2012, realistically producing its movement with a northwestward turn prior to its landfall. We then show that three experiments initialized at 00Z 16-18 October captured the genesis of Sandy with a lead time of up to 6 days and simulated reasonable evolution of Sandy's track and intensity in the next 2 day period of 18Z 21-23 October. Results suggest that the extended lead time of formation prediction is achieved by realistic simulations of multiscale processes, including (1) the interaction between an easterly wave and a low-level westerly wind belt (WWB) and (2) the appearance of the upper-level trough at 200 hPa to Sandy's northwest. The low-level WWB and upper-level trough are likely associated with a Madden-Julian Oscillation.

multiscale processes↗
DOE OSTI2021

Mesoscale Convective Systems in a Superparameterized E3SM Simulation at High Resolution

Accurately representing mesoscale convective systems (MCSs) is crucial to simulating the energy and water cycles in global climate models. Using a novel MCS identification and tracking algorithm applied to observations and model simulations, we evaluate how well the Energy Exascale Earth System Model simulates MCSs over the central US. Simulations performed by E3SM at 25 km grid spacing with (SP-E3SM) and without (E3SM) superparameterization are compared and evaluated against observations using multiple metrics highlighting important MCS characteristics. Compared to E3SM, SP-E3SM better simulates MCS number and MCS precipitation amount, diurnal cycle, propagation, and the probability distribution of precipitation rate in both spring and summer. The improvement from SP is partly contributed by improvement in simulating the large-scale environments, featuring enhanced atmospheric low-level moisture and larger moisture transport to the central US relative to E3SM. However, SP-E3SM still underestimates MCS precipitation amount, particularly in summer. This underestimation is closely related to the negative bias in MCS precipitation intensity, although the drier environments simulated during summer also contributes to underestimation of MCS frequency. Without SP, the larger bias in MCS precipitation amount is closely related to the negative bias in MCS frequency, while the substantial dry bias in the large-scale environments also contributes to underestimation of MCS intensity. Our results suggest that SP improves MCS simulation by improving modeling of the large-scale environments and convection initiation, which are both major limiting factors in E3SM even at 25 km grid spacing where deep convection is represented by a cumulus parameterization.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1994

Comparison and analysis of aircraft measurements and mesoscale atmospheric chemistry model simulations of tropospheric ozone

The Regional Acid Deposition Model (RADM) has been applied to several of the field experiments which were part of the Acid Models Operational and Diagnostic Evaluation Study (Acid MODES). The experiment which was of particular interest with regards to ozone photochemistry involved horizontal zig-zag flight patterns (ZIPPER) over an area from the eastern Ohio River valley to the Adirondacks of New York. Model simulations by both the standard resolution RADM (delta x = 80 km) and the nested grid RADM (delta x = 26.7 km) compare well to measurements in the low emission regions in central Pennsylvania and upstate New York, but underestimate in the high emission upper Ohio River valley. The nested simulation does considerably better, however, than the coarse grid simulation in terms of horizontal pattern and concentration magnitudes. Analysis of NO(x) and HO(x) concentrations and photochemical products rates of ozone show that the model's response to large point source emissions is very unsystematic both spatially and temporally. This is due to the models instability to realistically simulate the small scale (subgrid) gradients in precursor concentrations in and around large point source plumes.

Pleim, Jonathan E.↗
NASA NTRS1985

A mesoscale numerical forecast of an intense convective snowburst along the East Coast

Mesoscale numerical forecasts utilizing the Mesoscale Atmospheric Simulation System (MASS) are documented for a convective snowburst in the Washington, D.C.-Baltimore, Maryland, region on March 8, 1984 that was associated with secondary cyclogenesis along the East Coast. The forecasts are presented to demonstrate the ability of a mesoscale model to simulate dynamical interactions and diabatic process for a wintertime convective event that was inadequately predicted by local forecasters and to note some of the possible benefits of using mesoscale models for day-to-day forecasting. The results from this and other recent mesoscale modeling studies indicate that three-hourly output of key model fields, when combined with other data sources, can be a valuable aid to forecasters concerned with predicting weather events that are mesoscale in character.

Kocin, P. J.↗
NASA NTRS1988

Simulation and diagnosis of water vapor imagery with mesoscale model output

The present simulation of 6.7-micron channel water vapor imagery employs March 6-7, 1982 soundings from the Limited Area Mesoscale Prediction System (LAMPS) mesoscale model as inputs to a radiative transfer scheme. A comparison of model-generated and observed brightness temperatures indicates that LAMPS was able to replicate major features of the VAS imagery, including the pronounced warm, dry development streak and a cold cloud area. The model was not, however, able to resolve such finer-scaled details as the double structure of the development portion of the streak.

Muller, Bradley M.↗
DOE OSTI2020

The Role of Local Inhomogeneities on Dendrite Growth in LLZO-Based Solid Electrolytes

The majority of the ceramic solid electrolytes (LLZO, LATP) demonstrate polycrystalline grain/grain-boundary (G/GB) microstructure. Higher lithium (Li) concentration and lower mechanical stiffness result in current focusing at the GBs. Growth of Li dendrites through local inhomogeneities and subsequent short circuit of the cell is a major concern. Recent studies have revealed that bulk Li metal is a viscoplastic material that has low (~0.3 MPa) and high (~1.0 MPa) yield strength during deformation at smaller and larger rates of strain, respectively. It has been argued that during deposition at smaller current densities, due to its lower yield strength, Li metal should demonstrate plastic flow against stiff ceramic electrolytes, and Li dendrites will be prevented from penetrating through solid electrolytes. In this manuscript, a multiscale modeling framework has been developed for predicting properties of GBs and the bulk of ceramic electrolytes using atomistic calculations for input to mesoscale models. Using the parameters obtained from the atomistic simulations, the mesoscale model reveals that, given enough time, even at low charge rates, lithium dendrites can grow through the GBs of LLZO. The present multiscale model results also provide information regarding the dendrite growth velocity through LLZO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Realistic large eddy and dispersion simulation experiments during project sagebrush phase 1

Typical dispersion simulations use mesoscale models at grid spacing greater than 1 km to simulate pollutant transport. Advances in computing power have allowed Large Eddy Simulations (LES), (grid spacing less than 100 m) to be run with boundary conditions in the grayscale regime (grid size of 1 km–100 m). We used the WRF mesoscale/LES model and the HYSPLIT particle dispersion model to simulate SF 6 transport from Project Sagebrush Phase 1, using a grayscale-aware scheme with 4 nests of 3 km, 1 km, 200 m, 67 m. The WRF/LES simulation was in satisfactory agreement with meteorological observations but the HYSPLIT SF6 simulations indicated insufficient sub-grid turbulence kinetic energy, especially in the lowest 100 m. This resulted in over predictions of the surface SF6 concentration and insufficient vertical transport. Best agreement with the Sagebrush observations was obtained with the WRF/LES large-scale and sub-grid turbulence, enhanced with a HYSPLIT parameterized turbulence profile.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Evaluating Terrain as a Turbulence Generation Method

When driving microscale large-eddy simulations with mesoscale model solutions, turbulence will take space to develop, known as fetch, on the microscale domain. To reduce fetch, it is common to add perturbations near the boundaries to speed up turbulence development. However, when simulating domains over complex terrain, it is possible that the terrain itself can quickly generate turbulence within the boundary layer. It is shown here that rugged terrain is able to generate turbulence without the assistance of a perturbation strategy; however, the levels of turbulence generated are improved when adding perturbations at the inlet. Flow over smoothed, but not flat, terrain fails to generate adequate turbulence throughout the boundary layer in all tests conducted herein. Sensitivities to the strength of the mean wind speed and boundary layer height are investigated and show that higher wind speeds produce turbulence over terrain features that slower wind speeds do not. Further, by increasing the height of the capping inversion, the effectiveness of topography alone to generate turbulence throughout the depth of the boundary is diminished. In all cases, the inclusion of a perturbation strategy improved simulation performance with respect to turbulence development.

17 WIND ENERGY↗
NASA NTRS1984

Variational assimilation of VAS data into the mass model

Experiments are reported in which VAS data at 1200, 1500, and 1800 GMT 20 July 1981 were assimilated using both the adiabatic and full physics version of the Mesoscale Atmospheric Simulation System (MASS). A nonassimilation forecast is compared with forecasts assimilating temperature gradients only and forecasts assimilating both temperature and humidity gradients. The effects of successive vs single assimilations are also examined. It is noted that the greatest improvements to the forecast resulted when the VAS data resolved the mesoscale structure of the temperature and relative humidity fields. When this structure was assimilated into MASS, the ensuing simulations more clearly defined a mesoscale structure in the developing instabilities.

Cram, J. M.↗
NASA NTRS1993

A nonhydrostatic version of the Penn State-NCAR Mesoscale Model - Validation tests and simulation of an Atlantic cyclone and cold front

A nonhydrostatic extension to the Pennsylvania State University-NCAR Mesoscale Model is presented, which employs reference pressure as the basis for a terrain-following vertical coordinate, and the fully compressible system of equations. It is shown that this model, combined with the existing initialization techniques and the physics of the current hydrostatic model, is capable of real-data simulations on any scale, limited only by data quality and resolution and by computer resources. An example of an explosive cyclone simulation is presented, demonstrating the capability of the nonhydrostatic model to reproduce the hydrostatic model results at large scales.

Dudhia, Jimy↗
NASA NTRS1987

Use of simulated satellite radiances from a mesoscale numerical model to understand kinematic and dynamic processes

Techniques by which mesoscale numerical weather prediction model output and radiative transfer codes are combined to simulate the radiance fields that a given passive temperature/moisture satellite sensor would see if viewing the evolving model atmosphere are introduced. The goals are to diagnose the dynamical atmospheric processes responsible for recurring patterns in observed satellite radiance fields, and to develop techniques to anticipate the ability of satellite sensor systems to depict atmospheric structures and provide information useful for numerical weather prediction (NWP). The concept of linking radiative transfer and dynamical NWP codes is demonstrated with time sequences of simulated radiance imagery in the 24 TIROS vertical sounder channels derived from model integrations for March 6, 1982.

Kalb, Michael↗