Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstrip”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Very Long Microstrip Array Feeds of a Membrane Reflector for the Advanced Precipitation Radar

Very long microstrip arrays have been developed at the Ku- and Ka-band frequencies. Each array having an electrical length of about 110 free-space wavelengths is used to feed a deployable thin-membrane cylindrical reflector for a spaceborne precipitation radar application. These arrays, designed for 0(deg) and 30(deg) beam directions, achieved peak sidelobes of -20 dB and average sidelobes below -30 dB with peak cross-pol levels below -20 dB. Several unique challenges were encountered during the development of these very long arrays, such as the strong coupling between very long power divider lines, the strong leakage radiation from the lengthy transmission lines, and the lack of computer analysis capability of these electrically large arrays.

array antennas↗
DOE OSTI2026

Versatile High-Gain Low-Noise Readout ASIC for Silicon Microstrip Tracking Detectors

This work presents Turpial, a custom-designed low- power front-end readout ASIC for microstrip silicon sensors. Implemented in 130 nm CMOS technology, the chip integrates 64 identical readout channels, each including a configurable charge-sensitive amplifier, a bipolar pulse shaper, a 32-sample 50 Msps analog memory, and a 12-bit RC-hybrid SAR ADC operating at 1 Msps. To satisfy the target power budget of 5 mW per channel, the architecture employs a time-decoupled readout scheme in which fast transient signals are first captured in the analog memory and subsequently digitized at a lower rate. Turpial supports a wide dynamic range from 1 kℎ+ to 1 Mℎ+ while maintaining low noise performance, targeting an equivalent noise charge (ENC) below 200 𝑒−including the sensor, and providing a maximum gain of 1500 mV/fC. A digital block manages slow control, data acquisition, and data serialization through dual CML 300 Mb/s serializers. In addition, an on-chip reference circuit, based on a sub-1 V bandgap reference and an integrated LDO regulator, eliminates the need for external reference circuitry. Experimental results demonstrate that both the individual building blocks and the fully integrated ASIC meet the design specifications.

Hernandez, Hugo [Stanford University] (ORCID:00000↗
NASA NTRS1972

Design of microstrip components by computer

Development of computer programs for component analysis and design aids used in production of microstrip components is discussed. System includes designs for couplers, filters, circulators, transformers, power splitters, diode switches, and attenuators.

Cisco, T. C.↗
NASA NTRS1971

High-power microstrip RF switch

A microstrip-type single-pole double-throw (SPDT) switch whose RF and bias portions contain only a metallized alumina substrate and two PIN diodes has been developed. A technique developed to eliminate the dc blocking capacitors needed for biasing the diodes is described. These capacitors are extra components and could lower the reliability significantly. An SPDT switch fabricated on a 5.08 x 5.08 x 0.127-cm (2 x 2 x 0.050-in.) substrate has demonstrated an RF power-handling capability greater than 50 W at S-band. The insertion loss is less than 0.25 db and the input-to-off port isolation is greater than 36 db over a bandwidth larger than 30 MHz. The input voltage standing-wave ratio is lower than 1.07 over the same bandwidth. Theoretical development of the switch characteristics and experimental results, which are in good agreement with theory, are presented.

Choi, S. D.↗
NASA NTRS1972

Design of microstrip components by computer

A number of computer programs are presented for use in the synthesis of microwave components in microstrip geometries. The programs compute the electrical and dimensional parameters required to synthesize couplers, filters, circulators, transformers, power splitters, diode switches, multipliers, diode attenuators and phase shifters. Additional programs are included to analyze and optimize cascaded transmission lines and lumped element networks, to analyze and synthesize Chebyshev and Butterworth filter prototypes, and to compute mixer intermodulation products. The programs are written in FORTRAN and the emphasis of the study is placed on the use of these programs and not on the theoretical aspects of the structures.

Cisco, T. C.↗
NASA NTRS1972

High power microstrip RF switches.

Description of a microstrip-type single-pole double-throw switch, which uses only two PIN diodes, eliminates usual dc blocking capacitors, and has demonstrated an RF power handling capacity greater than 100 W CW at S-band. The insertion loss is less than 0.25 dB, and the input-to-off port isolation is greater than 36 dB over a bandwidth larger than 30 MHz.

Choi, S. D.↗
NASA NTRS1974

High-power microstrip switch

Switch, which uses only two p-i-n diodes on microstrip substrate, has been developed for application in spacecraft radio systems. Switch features improved power drain, weight, volume, magnetic cleanliness, and reliability, over currently-used circulator and electromechanical switches.

Choi, S. D.↗
NASA NTRS1972

Microstrip technology and its application to phased array compensation

A systematic analysis of mutual coupling compensation using microstrip techniques is presented. A method for behind-the-array coupling of a phased antenna array is investigated as to its feasibility. The matching scheme is tried on a rectangular array of one half lambda 2 dipoles, but it is not limited to this array element or geometry. In the example cited the values of discrete components necessary were so small an L-C network is needed for realization. Such L-C tanks might limit an otherwise broadband array match, however, this is not significant for this dipole array. Other areas investigated were balun feeding and power limits of spiral antenna elements.

Dudgeon, J. E.↗
NASA NTRS1976

Dielectric loss in microstrip lines

A technique is presented for calculating dielectric loss in microstrip lines. Numerical results for several different substrates are included. These are compared with other available results and experimental data.

Simpson, T. L.↗
NASA NTRS1976

The design and fabrication of microstrip omnidirectional array antennas for aerospace applications

A microstrip antenna design concept was developed that will provide quasi-omnidirectional radiation pattern characteristics about cylindrical and conical aerospace structures. L-band and S-band antenna arrays were designed, fabricated, and, in some cases, flight tested for rocket, satellite, and aircraft drone applications. Each type of array design is discussed along with a thermal cover design that was required for the sounding rocket applications.

Campbell, T. G.↗
NASA NTRS1980

Multiband microstrip antenna

Compact antenna transmits and receives elliptically and circularly polarized radiation. Antenna consists of layers of elliptical disks separated by dielectric substrates. Each disk operates at frequency determined by its size and dielectric constant of substrate. Individual frequency bands can be made to overlap, to yield single broadband antenna. Standard microstrip techniques are used to build it.

Yu, I.↗
NASA NTRS1980

A bounds on the resonant frequency of rectangular microstrip antennas

The calculation of currents induced by a transverse electric plane wave normally incident upon an infinite strip embedded in a grounded dielectric slab is used to infer a lower bound on the resonant frequency (or resonant-E-plane dimension) for rectangular microstrip antennas. An upper bound is provided by the frequency for which the E-plane dimension is a half-wavelength.

Bailey, M. C.↗
NASA NTRS1981

The design of a microstrip antenna array for a UHF space telemetry link

An array of microstrip antenna panels was designed for use on a small instrumented satellite as part of a 400-MHz telemetry link between that satellite and NASA's shuttle spacecraft. A roughly omnidirectional phi-plane pattern was desired. The 1.4-wavelength diameter of the satellite and the various ports and structures on its surface presented strong constraints on the antenna array design. Eight antennas, each one a quarter-wavelength panel with one radiating and one shorted edge, were chosen. A phi-plane pattern ripple of 4.4 dB and a gain of at least 0.1 dB relative to a half-wavelength dipole were realized. The design technique used for the individual antenna panels included the study of feed-point location for impedance matching and the effect of losses in the dielectric. A superposition method was used to synthesize the radiation patterns for different numbers and different excitations of antennas on the satellite.

Post, R. E.↗
NASA NTRS1982

Input impedance and mutual coupling of rectangular microstrip antennas

A moment method solution to the problem of input impedance and mutual coupling of rectangular microstrip antenna elements is presented. The formulation uses the grounded dielectric slab Green's function to account rigorously for the presence of the substrate and surface waves. Both entire basis (EB) and piecewise sinusoidal (PWS) expansion modes are used, and their relative advantages are noted. Calculations of input impedance and mutual coupling are compared with measured data and other calculations.

Pozar, D. M.↗
NASA NTRS1983

The finite ground plane effect on the microstrip antenna radiation patterns

The uniform geometrical theory of diffraction (GTD) is employed for calculating the edge diffracted fields from the finite ground plane of a microstrip antenna. The source field from the radiating patch is calculated by two different methods: the slot theory and the modal expansion theory. Many numerical and measured results are presented to demonstrate the accuracy of the calculations and the finite ground plane edge effect.

Huang, J.↗
NASA NTRS1984

The study of microstrip antenna arrays and related problems

The work on rectangular microstrip antennas for dual frequency operation is reported on. The principle of this approach is based on the excitation of a patch for two or more different modes which correspond to different frequencies. However, for a given geometry, the modal frequencies have a fixed relationship; therefore, the usefulness of such a design is greatly limited. In this study three different methods have been contrived to control the frequency ratio over a wide range. First, as found prevously, if shorting pins are inserted at certain locations in the patch, the low frequency can be raised substantially. Second, if slots are cut in the patch, the high frequency can be lowered considerably. By using both techniques, the two frequency ratio can be varied approximately from 3 to 1.3. After that, the addition of more pins or slots becomes ineffective.

Lo, R. Q.↗
NASA NTRS1984

Microstrip antennas for dual-frequency operation

Single element microstrip antenna for dual-frequency operation have been investigated. By placing shorting pins at appropriate locations in the patch, the ratio of two-band frequencies can be varied from 3 to 1.8. In many applications a smaller ratio is desired, and this can be achieved by introducing slots in the patch. In so doing, the ratio can be reduced to less than 1.3. For this type of antenna, a hybrid multiport theory is developed and theoretical results are found to be in excellent agreement with the measured.

Wang, B. F.↗
NASA NTRS1984

Circularly polarized conical patterns from circular microstrip antennas

A method is presented for generating circularly polarized conical patterns from circular microstrip antennas. These antennas are excited at higher order modes and require different feed arrangements for different mode excitations. It is determined that the peak direction of the conical pattern can be varied over a wide angular range. Modal expansion technique is employed to calculate the radiation patterns of these antennas.

Huang, J.↗