Search NASA⌕ Search

SEARCH · Search NASA

Results for “model forecasting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Comparison of Probabilistic Forecasts for Predictive Voltage Control

This paper explores predictive cooperative voltage control in distribution systems with highly variable sources such as photovoltaics (PV). The goal is to maintain the voltage profile within the limits despite the fluctuations due to sudden changes in solar power generation. The predictive voltage control method relies on probabilistic solar power and load forecasts to select the optimum Voltage Regulator (VR) taps appropriately. VR taps are selected to minimize the risk of voltage violation. A modified version of the IEEE 123 system is used as the case study. A 100% penetration of solar power is assumed for the distribution system with profiles for solar generation and loads added to the system. Three different probabilistic forecast models (Quantile Regression (QR), Gaussian distribution and volatility forecasting using Generalized Autoregressive Conditional Heteroskedasticity (GARCH)) are explored in this study. The results for the VR taps and Voltage Deviation Index (VDI) are compared to find the most effective forecast model.

Panamtash, Hossein↗
DOE OSTI2025

Transfer Learning Trained LSTM Models for Household Load Profile Forecasting

Grid edge renewable energy resources, such as rooftop solar photovoltaics, closely interact with consumer load profiles. Therefore, forecasting future electricity demand, ideally at the individual household level, is indispensable. In this paper, we present a transfer learning enhanced household load profile forecasting method. First, we tune a long short-term memory forecasting model to perform day-ahead prediction of household electricity load profiles. Then we improve these individualized models using transfer learning, and we use k-means clustering to create optimal source data sets. We find average improvements of 4.38% (largest improvement of 10.71%) when the entire data set was used to train the source model and 2.45% (largest improvement of 11.57%) in the mean absolute error when households were first clustered and used to train separate source models for each cluster. We find that transfer learning with clustered data can effectively boost the forecasting performance of the LSTM models. We use realistic household power measurements for 148 real residential households in Austin, Texas.

deep learning↗
NASA NTRS1982

A preliminary intercomparison between numerical upper wind forecasts and research aircraft measurements of jet streams

During the past several years, research on the structure of extra-tropical jet streams has been carried out with direct measurements with instrumented research aircraft from the National Center for Atmospheric Research (NCAR). These measurements have been used to describe the wind, temperature, turbulence and chemical characteristics of jet streams. A fundamental question is one of assessing the potential value of existing operational numerical forecast models for forecasting the meteorological conditions along commercial aviation flight routes so as to execute Minimum Flight Time tracks and thus obtain the maximum efficiency in aviation fuel consumption. As an initial attempt at resolving this question, the 12 hour forecast output from two models was expressed in terms of a common output format to ease their intercomparison. The chosen models were: (1) the Fine-Mesh Spectral hemispheric and (2) the Limited Area Fine Mesh (LFM) model.

Shapiro, M. A.↗
NASA NTRS2013

Integrating Wind Profiling Radars and Radiosonde Observations with Model Point Data to Develop a Decision Support Tool to Assess Upper-Level Winds for Space Launch

On the day-of-launch, the 45th Weather Squadron (45 WS) Launch Weather Officers (LWOs) monitor the upper-level winds for their launch customers to include NASA's Launch Services Program and NASA's Ground Systems Development and Operations Program. They currently do not have the capability to display and overlay profiles of upper-level observations and numerical weather prediction model forecasts. The LWOs requested the Applied Meteorology Unit (AMU) develop a tool in the form of a graphical user interface (GUI) that will allow them to plot upper-level wind speed and direction observations from the Kennedy Space Center (KSC) 50 MHz tropospheric wind profiling radar, KSC Shuttle Landing Facility 915 MHz boundary layer wind profiling radar and Cape Canaveral Air Force Station (CCAFS) Automated Meteorological Processing System (AMPS) radiosondes, and then overlay forecast wind profiles from the model point data including the North American Mesoscale (NAM) model, Rapid Refresh (RAP) model and Global Forecast System (GFS) model to assess the performance of these models. The AMU developed an Excel-based tool that provides an objective method for the LWOs to compare the model-forecast upper-level winds to the KSC wind profiling radars and CCAFS AMPS observations to assess the model potential to accurately forecast changes in the upperlevel profile through the launch count. The AMU wrote Excel Visual Basic for Applications (VBA) scripts to automatically retrieve model point data for CCAFS (XMR) from the Iowa State University Archive Data Server (http://mtarchive.qeol.iastate.edu) and the 50 MHz, 915 MHz and AMPS observations from the NASA/KSC Spaceport Weather Data Archive web site (http://trmm.ksc.nasa.gov). The AMU then developed code in Excel VBA to automatically ingest and format the observations and model point data in Excel to ready the data for generating Excel charts for the LWO's. The resulting charts allow the LWOs to independently initialize the three models 0-hour forecasts against the observations to determine which is the best performing model and then overlay the model forecasts on time-matched observations during the launch countdown to further assess the model performance and forecasts. This paper will demonstrate integration of observed and predicted atmospheric conditions into a decision support tool and demonstrate how the GUI is implemented in operations.

Bauman, William H., III↗
NASA NTRSDate not supplied

Challenges in Observing, Modeling, and Forecasting the June 2023 Smoke Event Over the Northeast United States

In the first week of May 2023, boreal Canada began an early start to the biomass burning season when fires erupted across Alberta and western Saskatchewan. Smoke entered the troposphere and spread across the United States as biomass burning emissions in Canada quadrupled the prior maximum since the onset of the MODIS satellite record. Adding to the already existing smoke, wildfires ignited in Quebec on June 2, 2023, producing a heavy plume of aerosol over the northeastern part of the continent. Meteorological factors, including an area of low pressure situated, nearly stationary, over Maine, transported the smoke into a densely populated corridor containing the cities of Washington, DC, Baltimore, Philadelphia, and New York City. Air quality alerts became widespread as near-surface levels of fine particulate matter (PM2.5) exceeded harmful levels due the low altitude of the smoke plume. Forecasting the smoke transport and impacts of such events requires a complex combination of observed initial conditions for meteorology and aerosols, knowledge of the emissions from wildfires, and a state-of-the-art Earth System model that couples these components together. Using a case-study perspective with the Goddard Earth Observing System (GEOS), challenges associated with near real time forecasting of the smoke plume are presented. Analyzed and forecasted aerosol optical depth will be evaluated using available satellite and AERONET observations, while surface aerosol will be assessed relative to observations of PM2.5. Lacking real time estimates of biomass burning emissions for inputs to our forecast model, particular attention is given to the use of day-old biomass burning emissions throughout the forecast period covering the first ten days in June 2023, and the resulting reduction in forecast skill will be quantified.

Allison Collow↗
NASA NTRSDate not supplied

Challenges in Observing, Modeling, and Forecasting the June 2023 Smoke Event over the Northeast United States

In the first week of May 2023, boreal Canada began an early start to the biomass burning season when fires erupted across Alberta and western Saskatchewan. Smoke entered the troposphere and spread across the United States as biomass burning emissions in Canada quadrupled the prior maximum since the onset of the MODIS satellite record. Adding to the already existing smoke, wildfires ignited in Quebec on June 2, 2023, producing a heavy plume of aerosol over the northeastern part of the continent. Meteorological factors, including an area of low pressure situated, nearly stationary, over Maine, transported the smoke into a densely populated corridor containing the cities of Washington, DC, Baltimore, Philadelphia, and New York City. Air quality alerts became widespread as near-surface levels of fine particulate matter (PM2.5) exceeded harmful levels due the low altitude of the smoke plume. Forecasting the smoke transport and impacts of such events requires a complex combination of observed initial conditions for meteorology and aerosols, knowledge of the emissions from wildfires, and a state-of-the-art Earth System model that couples these components together. Using a case-study perspective with the Goddard Earth Observing System (GEOS ), challenges associated with near real time forecasting of the smoke plume are presented. Analyzed and forecasted aerosol optical depth will be evaluated using available satellite and AERONET observations, while surface aerosol will be assessed relative to observations of PM2.5. Lacking real time estimates of biomass burning emissions for inputs to our forecast model, particular attention is given to the use of day-old biomass burning emissions throughout the forecast period covering the first ten days in June 2023, and the resulting reduction in forecast skill will be quantified.

Allison Collow↗
DOE OSTI2023

Best Practices in Electricity Load Modeling and Forecasting for Long-Term Power System Planning

This document highlights the best practices on data acquisition and management, modeling and stakeholder engagement required for enhanced load modeling and forecasting. Each section is interspersed with case studies to highlight lessons from different country contexts to highlight both cross-cutting and location specific best practices needed to conduct robust load modeling and forecasting.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Use of Physics to Improve Solar Forecast: Physics-Informed Persistence Models for Simultaneously Forecasting GHI, DNI, and DHI

Observation-based statistical models have been widely used in forecasting solar energy; however, existing models often lack a clear relation to physics and are limited largely to global horizontal irradiance (GHI) forecasts over relatively short time horizons (< 1 hour). Incorporating physics into observation-based models, increasing forecast time horizons and developing a model system for forecasting not only GHI but also direct normal irradiance (DNI) and diffuse horizontal irradiance (DHI) remain challenging, especially under cloudy conditions because of complex cloud-radiation interactions. This work attempts to address these challenges by developing a hierarchy of four new physics-informed persistence models that can be used to simultaneously forecast GHI, DNI and DHI. The decade-long measurements (1998 to 2014) at the U.S. Department of Energy's Atmospheric Radiation Measurement (ARM)'s Southern Great Plains (SGP) Central Facility site are used to evaluate the performance of the new models. Overall, the results show that the new physics-informed forecast models generally outperform the simple and smart persistence models, and improve the forecast accuracy at lead times from 1.25 hours up to 6 hours. Further analysis reveals that the forecast error is highly related to the error and temporal variability of the assumed cloud predictor. The best model for forecasting different radiative components can be explained by the relationship between solar irradiances and cloud properties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Best Practices in Electricity Load Modeling and Forecasting for Long-Term Power System Planning

This report highlights best practices for enhanced load modeling and forecasting for long-term power sector planning. The best practices touch on stakeholder engagement, data acquisition and management, modeling and validation, and scenario development. Case studies are provided to highlight crosscutting lessons that could inform enhanced load modeling and forecasting across different country settings. Though this work presents best practices resulting from support to the PDOE, the list is by no means exhaustive—nor is it meant to be prescriptive.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Fast and accurate influenza forecasting in the United States with Inferno

Infectious disease forecasting is an emerging field and has the potential to improve public health through anticipatory resource allocation, situational awareness, and mitigation planning. By way of exploring and operationalizing disease forecasting, the U.S. Centers for Disease Control and Prevention (CDC) has hosted FluSight since the 2013/14 flu season, an annual flu forecasting challenge. Since FluSight’s onset, forecasters have developed and improved forecasting models in an effort to provide more timely, reliable, and accurate information about the likely progression of the outbreak. While improving the predictive performance of these forecasting models is often the primary objective, it is also important for a forecasting model to run quickly, facilitating further model development and improvement while providing flexibility when deployed in a real-time setting. In this vein I introduce Inferno, a fast and accurate flu forecasting model inspired by Dante, the top performing model in the 2018/19 FluSight challenge. When pseudoprospectively compared to all models that participated in FluSight 2018/19, Inferno would have placed 2nd in the national and regional challenge as well as the state challenge, behind only Dante. Inferno, however, runs in minutes and is trivially parallelizable, while Dante takes hours to run, representing a significant operational improvement with minimal impact to performance. Forecasting challenges like FluSight should continue to monitor and evaluate how they can be modified and expanded to incentivize the development of forecasting models that benefit public health.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Optimizing Prediction Error for Time-dependent Solar Radiation Modeling

Numerical weather forecasting models and statistical methods have found wide use to help power companies estimate renewable output, but better methods are needed, particularly for extended forecasts. Machine learning approaches have been used here as well, but so far a major limitation is the ability to also predict the corresponding uncertainty in a forecast. Here we show that both can be done and demonstrate this using a long-term-short memory neural network where the difference between predicted and ground truth data are used to train a model for the corresponding forecast uncertainties.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2008

A Semi-Empirical Model for Forecasting Relativistic Electrons at Geostationary Orbit

We developed a new prediction model for forecasting relativistic (>2MeV) electrons, which provides a VERY HIGH correlation between predicted and actually measured electron fluxes at geostationary orbit. This model implies the multi-step particle acceleration and is based on numerical integrating two linked continuity equations for primarily accelerated particles and relativistic electrons. The model includes a source and losses, and used solar wind data as only input parameters. We used the coupling function which is a best-fit combination of solar wind/Interplanetary Magnetic Field parameters, responsible for the generation of geomagnetic activity, as a source. The loss function was derived from experimental data. We tested the model for four year period 2004-2007. The correlation coefficient between predicted and actual values of the electron fluxes for whole four year period as well as for each of these years is about 0.9. The high and stable correlation between the computed and actual electron fluxes shows that the reliable forecasting these electrons at geostationary orbit is possible. The correlation coefficient between predicted and actual electron fluxes is stable and incredibly high.

Lyatsky, Wladislaw↗
NASA NTRS2013

A Global Ozone Climatology from Ozone Soundings via Trajectory Mapping: A Stratospheric Perspective

This study explores a domain-filling trajectory approach to generate a global ozone climatology from sparse ozonesonde data. Global ozone soundings of 51,898 profiles at 116 stations over 44 years (1965-2008) are used, from which forward and backward trajectories are performed for 4 days, driven by a set of meteorological reanalysis data. Ozone mixing ratios of each sounding from the surface to 26 km altitude are assigned to the entire path along the trajectory. The resulting global ozone climatology is archived monthly for five decades from the 1960s to the 2000s with grids of 5 degree 5 degree 1 km (latitude, longitude, and altitude). It is also archived yearly from 1965 to 2008. This climatology is validated at 20 ozonesonde stations by comparing the actual ozone sounding profile with that found through the trajectories, using the ozone soundings at all the stations except one being tested. The two sets of profiles are in good agreement, both individually with correlation coefficients between 0.975 and 0.998 and root mean square (RMS) differences of 87 to 482 ppbv, and overall with a correlation coefficient of 0.991 and an RMS of 224 ppbv. The ozone climatology is also compared with two sets of satellite data, from the Satellite Aerosol and Gas Experiment (SAGE) and the Optical Spectrography and InfraRed Imager System (OSIRIS). Overall, the ozone climatology compares well with SAGE and OSIRIS data by both seasonal and zonal means. The mean difference is generally under 20 above 15 km. The comparison is better in the northern hemisphere, where there are more ozonesonde stations, than in the southern hemisphere; it is also better in the middle and high latitudes than in the tropics, where assimilated winds are imperfect in some regions. This ozone climatology can capture known features in the stratosphere, as well as seasonal and decadal variations of these features. Furthermore, it provides a wealth of detail about longitudinal variations in the stratosphere such as the spring ozone maximum over the Canadian Arctic. It also covers higher latitudes than current satellite data. The climatology shows clearly the depletion of ozone from the 1970s to the mid 1990s and ozone recovery in the 2000s. When this climatology is used as the upper boundary condition in an Environment Canada operational chemical forecast model, the forecast is improved in the vicinity of the upper tropospherelower stratosphere region. As this ozone climatology is neither dependent on a priori data or photochemical modeling, it provides independent information and insight that can supplement satellite data and model simulations and enhance our understanding of stratospheric ozone.

SAGE↗
DOE OSTI2025

Popnet : computer vision based deep learning model for forecasting gridded population

Here, this study introduces Popnet, a deep learning model for forecasting 1 km-gridded populations, integrating U-Net, ConvLSTM, a Spatial Autocorrelation module and deep ensemble methods. Using spatial variables and population data from 2000 to 2020, Popnet predicts South Korea’s population trends by age groups (under 14, 15-64 and over 65) up to 2040. In validation, it outperforms traditional machine learning and state-of-the-art computer vision models. The output of this model discovered significant polarisation: population growth in urban areas, especially the capital region, and severe depopulation in rural areas. Popnet is a robust tool for offering significant insights to policymakers and related stakeholders about the detailed future population, which allows them to establish detailed, localised planning and resource allocations.

computer vision↗
NASA NTRS2008

CALIPSO Satellite Lidar Identification Of Elevated Dust Over Australia Compared With Air Quality Model PM60 Forecasts

Global measurements of the vertical distribution of clouds and aerosols have been recorded by the lidar on board the CALIPSO (Cloud Aerosol Lidar Infrared Pathfinder Satellite Observations) satellite since June 2006. Such extensive, height-resolved measurements provide a rare and valuable opportunity for developing, testing and validating various atmospheric models, including global climate, numerical weather prediction, chemical transport and air quality models. Here we report on the initial results of an investigation into the performance of the Australian Air Quality Forecast System (AAQFS) model in forecasting the distribution of elevated dust over the Australian region. The model forecasts of PM60 dust distribution are compared with the CALIPSO lidar Vertical Feature Mask (VFM) data product. The VFM classifies contiguous atmospheric regions of enhanced backscatter as either cloud or aerosols. Aerosols are further classified into six subtypes. By comparing forecast PM60 concentration profiles to the spatial distribution of dust reported in the CALIPSO VFM, we can assess the model s ability to predict the occurrence and the vertical and horizontal extents of dust events within the study area.

Young, Stuart A.↗
NASA NTRS2008

Assimilation of Atmospheric InfraRed Sounder (AIRS) Profiles using WRF-Var

The Weather Research and Forecasting (WRF) model contains a three-dimensional variational (3DVAR) assimilation system (WRF-Var), which allows a user to join data from multiple sources into one coherent analysis. WRF-Var combines observations with a background field traditionally generated using a previous model forecast through minimization of a cost function. In data sparse regions, remotely-sensed observations may be able to improve analyses and produce improved forecasts. One such source comes from the Atmospheric Infrared Sounder (AIRS), which together with the Advanced Microwave Sounding Unit (AMSU), represents one of the most advanced space-based atmospheric sounding systems. The combined AIRS/AMSU system provides radiance measurements used as input to a sophisticated retrieval scheme which has been shown to produce temperature profiles with an accuracy of 1 K over 1 km layers and humidity profiles with accuracy of 15% in 2 km layers in both clear and partly cloudy conditions. The retrieval algorithm also provides estimates of the accuracy of the retrieved values at each pressure level, allowing the user to select profiles based on the required error tolerances of the application. The purpose of this paper is to describe a procedure to optimally assimilate high-resolution AIRS profile data into a regional configuration of the Advanced Research WRF (ARW) version 2.2 using WRF-Var. The paper focuses on development of background error covariances for the regional domain and background field type using gen_be and an optimal methodology for ingesting AIRS temperature and moisture profiles as separate overland and overwater retrievals with different error characteristics in the WRF-Var. The AIRS thermodynamic profiles are obtained from the version 5.0 Earth Observing System (EOS) science team retrieval algorithm and contain information about the quality of each temperature layer. The quality indicators are used to select the highest quality temperature and moisture data for each profile location and pressure level. Analyses are run to produce quasi-real-time regional weather forecasts over the continental U.S. The preliminary assessment of the impact of the AIRS profiles will focus on intelligent use of the quality indicators, optimized tuning of the WRF-Var, and comparison of analysis soundings to radiosondes.

Zavodsky, Brad↗
NASA NTRS2008

Coastal Marsh Monitoring for Persistent Saltwater Intrusion

This viewgraph presentation reviews NASA's work on the project that supports the Gulf of Mexico Alliance (GOMA) Governors Action Plan to monitor the coastal wetlands for saltwater intrusion. The action items that relate to the task are: (1) Obtain information on projected relative sea level rise, subsidence, and storm vulnerability to help prioritize conservation projects, including restoration, enhancement, and acquisition, and (2) Develop and apply ecosystem models to forecast the habitat structure and succession following hurricane disturbance and changes in ecological functions and services that impact vital socio-economic aspects of coastal systems. The objectives of the program are to provide resource managers with remote sensing products that support ecosystem forecasting models requiring salinity and inundation data. Specifically, the proposed work supports the habitat-switching modules in the Coastal Louisiana Ecosystem Assessment and Restoration (CLEAR) model, which provides scientific evaluation for restoration management.

Hall, Callie M.↗
NASA NTRS2019

Ozone Vertical Profile Satellite Measurements by S-NPP OMPS, Aura MLS, and Sentinel-5P TROPOMI

NASA has been monitoring ozone variations from space since 1970 with the launch of the Backscatter Ultraviolet instrument (BUV) on Nimbus- 4. Ozone in the Earth’s stratosphere and troposphere plays a crucial role in protecting life from harmful solar UV radiation, and it also influences Earth’s climate. The vertical distribution of ozone is used in modeling forecasts, verifying model analysis and simulations, and improving the measurement of tropospheric ozone that is a toxic constituent of air pollution. The Microwave Limb Sounder (MLS) on the EOS Aura spacecraft has been monitoring long-term continuous stratosphere ozone vertical behaviors since 2004. The Ozone Mapper Profile Suite (OMPS) on the Suomi National Polar-orbiting Partnership (S-NPP) was launched in 2011. Two of its three instruments, the Limb Profiler (LP) and the Nadir Profiler (NP), are designed to map ozone profiles with full global coverage (~6 days for NP) and a high level of vertical accuracy (1-km reporting record for LP) in the stratosphere and upper troposphere. The TROPOspheric Monitoring Instrument (TROPOMI) on the Copernicus Sentinel-5 Precursor (S5P), launched in 2017, aims to retrieve ozone profiles in both the troposphere and up to top-of-atmosphere (TOA) by using UV radiation measurements in a spectral range of 270-320 nm. S5P/TROPOMI ozone profile products are planned to become available in April 2020. This presentation will concentrate on satellite ozone vertical profile data collections from OMPS and MLS which are archived at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC). TROPOMI ozone vertical profiles for the troposphere and to top-of-atmosphere will become available at NASA GES DISC in 2020. The presentation briefly explores their potential complementary usability in determining three-dimensional ozone global distributions with high temporal and spatial resolutions.

Zeng, Jian↗