Search NASA⌕ Search

SEARCH · Search NASA

Results for “moderation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Electrolytes with moderate lithium polysulfide solubility for high-performance long-calendar-life lithium–sulfur batteries

Lithium–sulfur (Li-S) batteries with high energy density and low cost are promising for next-generation energy storage. However, their cycling stability is plagued by the high solubility of lithium polysulfide (LiPS) intermediates, causing fast capacity decay and severe self-discharge. Exploring electrolytes with low LiPS solubility has shown promising results toward addressing these challenges. However, here, we report that electrolytes with moderate LiPS solubility are more effective for simultaneously limiting the shuttling effect and achieving good Li-S reaction kinetics. We explored a range of solubility from 37 to 1,100 mM (based on S atom, [S]) and found that a moderate solubility from 50 to 200 mM [S] performed the best. Using a series of electrolyte solvents with various degrees of fluorination, we formulated the S ingle- S olvent, S ingle- S alt, S tandard S alt concentration with M oderate L i PSs so l ubility E lectrolytes (termed S 6 MILE ) for Li-S batteries. Among the designed electrolytes, Li-S cells using fluorinated-1,2-diethoxyethane S 6 MILE (F4DEE-S 6 MILE) showed the highest capacity of 1,160 mAh g −1 at 0.05 C at room temperature. At 60 °C, fluorinated-1,4-dimethoxybutane S 6 MILE (F4DMB-S 6 MILE) gave the highest capacity of 1,526 mAh g −1 at 0.05 C and an average CE of 99.89% for 150 cycles at 0.2 C under lean electrolyte conditions. This is a fivefold increase in cycle life compared with other conventional ether-based electrolytes. Moreover, we observed a long calendar aging life, with a capacity increase/recovery of 4.3% after resting for 30 d using F4DMB-S 6 MILE. Furthermore, the correlation between LiPS solubility, degree of fluorination of the electrolyte solvent, and battery performance was systematically investigated.

25 ENERGY STORAGE↗

Advancements in Yttrium Hydride Moderator Development

As microreactors evolve to become a more affordable and efficient worldwide energy source, the development of moderator material within the system to decrease the required mass of low-enriched uranium fuel is important. The use of low- instead of high-enriched uranium in small nuclear reactors stems from recent national policies associated with nonproliferation. New designs are being developed for a range of applications and nuclear space systems in particular. Using system geometries such as those described in this paper, the next step is to advance the technology readiness level of moderator material such as delta-yttrium hydride (YH x,x = 1.6–2.0 ) so that it can be qualified for use in a microreactor system. Although characterization of unirradiated material has been documented previously, to fully understand the performance of this material, behavior in relevant irradiation environments must occur. This paper describes the fabrication of yttrium hydride samples through innovative techniques and how these samples were tested in two relevant neutron environments. These two experiments include (1) a critical experiment performed at the National Criticality Experiments Research Center (NCERC) to evaluate reactivity changes in a neutron-critical environment and (2) irradiation in the Advanced Test Reactor (ATR) to assess structural integrity/material form, thermophysical data, hydrogen permeability, and other features post irradiation. For this purpose, hundreds of samples were fabricated for the NCERC and ATR experiments and are described within this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Investigation of Ion-Irradiated Beryllium Carbide (Be 2 C) for High-Temperature Nuclear Reactor Moderators

Beryllium carbide (Be 2 C) is an attractive alternative to graphite as a moderator material because of its high melting point, moderating efficiency, and theoretical environmental compatibility in MSRs, FHRs and HTGRs. However, its behavior under neutron irradiation is not yet known. Research on otherwise promising beryllium compounds are restricted because of the toxic nature of the material. For this work, a novel experiment was designed to safely irradiate beryllium-containing samples at The Michigan Ion Beam Laboratory (MIBL). Using this new capability, Be 2 C samples were irradiated with 9 MeV C 3+ ions from 2 dpa to 30 dpa, at temperatures up to 500 °C. Samples were characterized to investigate radiation tolerance. No evidence of phase precipitation, dislocation loops, or amorphization was observed up to 30 dpa, suggesting good radiation tolerance. One sample left in air for ~3 months oxidized slowly and lost structural integrity, while a sample kept in argon did not, suggesting that Be 2 C is not suitable for service in moist environments, but maintains its integrity in dry environments.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Advancing the STS Neutron Moderator Design with an Automated Optimization Workflow and Unstructured Mesh Modeling

With the Second Target Station approaching its final design phase, a detailed neutronics evaluation of its critical components is necessary. Optimizing the dimensions of the two cold-source moderators that are at the heart of this facility presents a multi-objective optimization problem for which an accurate geometric description is crucial. We have applied a fully automated optimization workflow in which a detailed unstructured mesh geometry is automatically generated with Attila4MC, starting from a parametrized CREO geometry followed by preprocessing with SpaceClaim. With this geometry, a MCNP run is performed to calculate the brightness metrics, which are subsequently provided to the optimization algorithm in DAKOTA that provides new parameters and drives the optimization loop until convergence. In this paper, we show the results of the analysis that are used for the final design of the cylindrical and tube moderator. The optimization simulations provide a refinement to and confirmation of the conclusions of the previous design iteration. Additional to the optimization, a sensitivity study is performed to study the effect of minor geometry changes, which is important for the final engineering design. In conclusion, with these studies, we demonstrate that the automated workflow and high-fidelity unstructured mesh modeling are efficient tools for a thorough design evaluation.

DAKOTA↗

SECOND TARGET STATION MODERATOR PERFORMANCE WITH A ROTATING TARGET

Oak Ridge National Laboratory manages and operates the Spallation Neutron Source and the High Flux Isotope Reactor, two of the world's most advanced neutron scattering facilities. Both facilities are funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Science, and are available to researchers from all over the world. Delivering cutting edge science requires continuous improvements and development of the facilities and instruments. The SNS was designed from the outset to accommodate an additional target station, or Second Target Station (STS), and an upgraded accelerator feeding proton beams to STS and the existing First Target Station (FTS). Upgrade of the accelerator and the design and construction of STS are being proposed. The presently considered STS configuration is driven with short (<1 s) proton pulses at 10 Hz repetition rate and 467 kW proton beam power, and is optimized for high intensity and high resolution long wavelength neutron applications. STS will allow installation of 22 beamlines and will expand and complement the current national neutron scattering capabilities. In 2015 the STS studies were performed for a compact tungsten target; first a stationary tungsten plate target was analyzed to considerable details and then dropped in favor of a rotating target. For both target options the proton beam footprint as small as acceptable from mechanical and heat removal aspects is required to arrive at a compact-volume neutron production zone in the target, which is essential for tight coupling of target and moderators and for achieving high-intensity peak neutron fluxes. This paper will present recent STS work with the emphasis on neutronics and moderator performance.

long wavelength neutrons↗

Radiogenic lead with dominant content of {sup 208}Pb: New coolant and neutron moderator for innovative nuclear reactors

The advantages of radiogenic lead with dominant content of {sup 208}Pb as a reactor coolant with respect to natural lead are caused by unique nuclear properties of {sup 208}Pb which is a double-magic nucleus with closed proton and neutron shells. This results in significantly lower micro cross section and resonance integral of radiative neutron capture by {sup 208}Pb than those for numerous light neutron moderators. The extremely weak ability of {sup 208}Pb to absorb neutrons results in the following effects. Firstly, neutron moderating factor (ratio of scattering to capture cross sections) is larger than that for graphite and light water. Secondly, age and diffusion length of thermal neutrons are larger than those for graphite, light and heavy water. Thirdly, neutron lifetime in {sup 208}Pb is comparable with that for graphite, beryllium and heavy water what could be important for safe reactor operation. The paper presents some results obtained in neutronics and thermal-hydraulics evaluations of the benefits from the use of radiogenic lead with dominant content of {sup 208}Pb instead of natural lead as a coolant of fast breeder reactors. The paper demonstrates that substitution of radiogenic lead for natural lead can offer the following benefits for operation of fast breeder reactors. Firstly, improvement of the reactor safety thanks to the better values of coolant temperature reactivity coefficient and, secondly, improvement of some thermal-hydraulic reactor parameters. Radiogenic lead can be extracted from thorium sludge without isotope separation as {sup 208}Pb is a final isotope in the decay chain of {sup 232}Th. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

On the effect of different placing ZrH moderator material on the performance of a SFR core

This study describes the development of a sodium fast reactor fuel assembly design with reduced void reactivity coefficient, achieved through the use of the ZrH moderating material. In the study the sodium void effect, as well as the major feedback coefficients are analyzed. Besides the feedback coefficients, the influence on the operational parameters like neutron flux distribution, power distribution, and burnup distribution is investigated for the different possibilities of arranging the moderating material in the fuel assembly. Additionally, the fuel cycle parameters - breeding and minor actinide production - are analyzed. For a first evaluation of the behavior during transients the influence of temperature changes in the ZrH is studied. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Demonstrating compliance with moderator content limits in uranium dioxide powder upon leaving a furnace environment

A challenge was posed to the criticality safety consultant to consider whether instrumentation identified by Plant Management in an existing facility could be claimed as appropriate safety measures to ensure compliance with moderator content limits in uranium dioxide (UO{sub 2}) powder. During processing of low enriched UO{sub 2}, trays of powder are heated in a steam and hydrogen environment in order to reduce fluoride levels. Whilst in the furnace environment criticality safety is ensured by the geometry of the furnace trays used to convey the powder; however, upon leaving the furnace the UO{sub 2} is bulked to a 210 litre drum subject to limited moderation control. Under fault conditions there is a potential that the powder may become wetted due to an imbalance in furnace gas flows resulting in steam condensing in the cooling section of the furnace. Therefore, the safety case methodology followed suggests that two independent and diverse safety measures are provided to terminate the progression of the fault(s) to criticality. The existing criticality safety case credits an infra-red moisture meter as one of two safety measures; however, the calibration procedure required to ensure this device remains suitable is a considerable challenge from a plant operability perspective. As an initial review failed to identify any suitable like-for-like replacement, the National Nuclear Laboratory (NNL) Nuclear Safety Section were requested by the customer to consider the existing criticality safety case and investigate whether any existing instrumentation could be used as an alternative method of detecting conditions in which excess moisture could be present within the furnace trays. A number of solutions were proposed and the benefits and challenges around each are discussed in this paper, concluding with the approach adopted by the project. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Critical Experiments to Benchmark Moderator Temperature Reactivity Worth

The simulation of nuclear reactors requires being able to accurately model several different interrelated physical processes including neutronics, heat production, fluid/thermal physics, structural mechanics, fuel behavior, chemistry, and balance-of-plant. In order to design and use new types of nuclear reactors, modern codes have been developed which couple together the behavior of these different physical models to accurately consider the feedback effects between different physical effects. The SHARP toolset, part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) project, is an example of an effort to combine models of neutronics, thermal-hydraulics, and structural mechanics in a coupled simulation to model any type of nuclear reactor as accurately as possible. The validation of multi-physics coupling techniques requires new experimental benchmark experiments specifically designed for that purpose. As a preliminary step towards design of these experiments, a series of measurements have been performed to demonstrate the temperature-dependent neutronic behavior of a well-characterized reactor assembly for comparison with the available codes. The facility adopted for these experiments is Walthousen Reactor Critical Facility (RCF) at Rensselaer Polytechnic Institute (RPI). The RCF is unique in several aspects and provides several advantages to this type of experiment. Built in 1954 by the American Locomotive Company (ALCO), the RCF has been used to design small compact reactors. RPI acquired the facility in 1963, and the highly-enriched uranium fuel was later swapped for low-enriched fuel pins that were excess from the SPERT facility experiments. Nowadays, The RCF is regarded as a teaching and research facility, permitting the training of licensed Senior Reactor Operators, and offering a critical experiments laboratory course to students. The reactor core standard configuration consists of 332 or 333 UO{sub 2} fuel pins, containing a total of 35.2 grams of U- 235 each (4.81 % enriched). The pins are arranged in a regular lattice with a pitch of 1.6256 cm. The number and configuration of these pins are flexible, and the reactor's overall thermal power is limited to no more than 15 W. As the low thermal output of the reactor does not induce any measurable temperature changes, the effect of temperature in the reactor is observed by applying two 18- kW electric heaters to the water moderator, with mechanical agitators to maintain uniformity in moderator temperature. Before beginning experiments, each fuel pin inside the core was surveyed for mechanical defects (bending or warping) that may contribute to uncertainty in core behavior. Every fuel pin has been individually removed from the core and checked for any irregularities on its surface (caused by shocks or usage). About 12 % of the 333 pins were found to have a small degree of warping and were replaced with excess pins available in the facility. In doing this, we made sure all the pins are identical, thereby increasing the accuracy of future models. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Further work on credible levels of water moderation - 14267

The Research and Test Reactor (RTR) manufacturing operation produces aluminum clad fuel plates that are assembled into 'box type' elements that are used in reactors like the Advanced Test Reactor, University of Missouri, and Massachusetts Institute of Technology. These fuel plates and elements are stored in both horizontal and vertical arrangements during the manufacturing process. Since the presence of water is so important to criticality safety of the operations, a study was undertaken to establish credible levels of water moderation. At the NCSD 2013 Topical meeting, credible levels of interspersed water moderation from multiple sources including firefighting, steam and rain were presented. This covered the initial portions of the research. Subsequent research was conducted on water films resulting from these water sources. This phase of the research involved the formation of water films. These can form from condensation, water sprays or immersion. The thickness of the water films from these sources ranged from 0.04 cm to 0.30 cm for vertical fuel plates. Studies were also conducted on horizontal plates, stacks of plates and assembled elements. For fuel plates, the films ranged from essentially zero for stacked plates to 0.25 cm. For an element, there was sufficient adhesion that all of the channels were filled. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Experiments with partially-reflected square-pitched arrays of water-moderated 6.9 enriched UO{sub 2} fuel rods - 14593

The Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories was designed to provide benchmark criticality and reactor physics data for water-moderated pin-fueled nuclear reactor cores in the 5 to 10 percent enrichment range. Approach-to-critical experiments were performed on nineteen partially-reflected arrays of pure water-moderated and -reflected fuel rods with a fuel-to-water volume ratio of 0.67. Those configurations are described and the results of the measurements are reported in this paper. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Rainfall From Resolved Rather Than Parameterized Processes Better Represents the Present‐Day and Climate Change Response of Moderate Rates in the Community Atmosphere Model

Abstract Deficiencies in the parameterizations of convection used in global climate models often lead to a distorted representation of the simulated rainfall intensity distribution (i.e., too much rainfall from weak rain rates). While encouraging improvements in high percentile rainfall intensity have been found as the horizontal resolution of the Community Atmosphere Model is increased to ∼25 km, we demonstrate no corresponding improvement in the moderate rain rates that generate the majority of accumulated rainfall. Using a statistical framework designed to emphasize links between precipitation intensity and accumulated rainfall beyond just the frequency distribution, we show that CAM cannot realistically simulate moderate rain rates, and cannot capture their intensification with climate change, even as resolution is increased. However, by separating the parameterized convective and large‐scale resolved contributions to total rainfall, we find that the intensity, geographic pattern, and climate change response of CAM's large‐scale rain rates are more consistent with observations (TRMM 3B42), superparameterization, and theoretical expectations, despite issues with parameterized convection. Increasing CAM's horizontal resolution does improve the representation of total rainfall intensity, but not due to changes in the intensity of large‐scale rain rates, which are surprisingly insensitive to horizontal resolution. Rather, improvements occur through an increase in the relative contribution of the large‐scale component to the total amount of accumulated rainfall. Analysis of sensitivities to convective timescale and entrainment rate confirm the importance of these parameters in the possible development of scale‐aware parameterizations, but also reveal unrecognized trade‐offs from the entanglement of precipitation frequency and total amount.

54 ENVIRONMENTAL SCIENCES↗

Impact of image guidance on toxicity and tumour outcome in moderately hypofractionated external-beam radiotherapy for prostate cancer

To report toxicity and efficacy outcome of moderately hypofractionated image-guided external-beam radiotherapy in a large series of patients treated for prostate cancer (PCa). Between 10/2006 and 12/2015, 572 T1-T3N0M0 PCa patients received 70.2 Gy in 26 fractions at 2.7 Gy/fraction: 344 patients (60%) with three-dimensional conformal radiotherapy (3D-CRT) and 228 (40%) with intensity-modulated radiotherapy (IMRT). Radiation Therapy Oncology Group/European Organization for Research and Treatment of Cancer criteria and Houston definition (nadir + 2) were used for toxicity and biochemical failure evaluation, respectively. Median age was 74 years (interquartile range 69–77). Compared with 3D-CRT, in IMRT group more high-risk patients (29% vs 18%; P = 0.002) and more high-volume target (75% vs 60%; P < 0.001) were included. Acute gastro-intestinal (GI) toxicity G > 1 were registered in 8% and in 11% IMRT and 3D-CRT patients, respectively, whereas late GI G > 1 were observed in 2% and 16% IMRT and 3D-CRT patients, respectively. Acute genito-urinary (GU) toxicity G > 1 were registered in 26% and 40% IMRT and 3D-CRT patients, respectively, whereas late GU G > 1 occurred in 5% IMRT and 15% 3D-CRT patients. Multivariate proportional hazard Cox models confirmed significantly greater risk of late toxicity with 3D-CRT compared to IMRT for GU > 1 (P = 0.004) and for GI > 1 (P < 0.001). With a median 4-year follow-up, overall survival (OS), clinical progression-free survival (cPFS) and biochemical PFS (bPFS) for the whole series were 91%, 92% and 91%, respectively. cPFS and bPFS were significantly different by risk groups. Multivariate Cox models for bPFS and cPFS showed no difference between irradiation techniques and a significant impact of risk group and initial PSA. Moderately hypofractionated radiotherapy is a viable treatment option for localized PCa with excellent tumour control and satisfactory toxicity profile. IMRT seems associated with a reduction in toxicity, whereas tumour control was equal between IMRT and 3D-CRT patients and depended mainly on the risk category.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Moderate active Fe 3+ doping enables improved cationic and anionic redox reactions for wide-voltage-range sodium storage

Layered metal oxides are promising cathode materials for sodium-ion batteries (SIBs) due to their high theoretical specific capacity and wide Na + diffusion channels. However, the irreversible phase transitions and cationic/anionic redoxes cause fast capacity decay. Herein, P2-type Na 0.67 Mg 0.1 Mn 0.8 Fe 0.1 O 2 (NMMF-1) cathode material with moderate active Fe 3+ doping has been designed for sodium storage. Uneven Mn 3+ /Mn 4+ distribution is observed in NMMF-1 and the introduction of Fe 3+ is beneficial for reducing the Mn 3+ contents both at the surface and in the bulk to alleviate the Jahn–Teller effect. The moderate Fe 3+ /Fe 4+ redox can realize the best tradeoff between capacity and cyclability. Therefore, the NMMF-1 demonstrates a high capacity (174.7 mAh g -1 at 20 mA g -1 ) and improved cyclability (78.5% over 100 cycles) in a wide-voltage range of 1.5–4.5 V (vs. Na + /Na). In-situ X-ray diffraction reveals a complete solid-solution reaction with a small volume change of 1.7% during charge/discharge processes and the charge compensation is disclosed in detail. This study will provide new insights into designing high-capacity and stable layered oxide cathode materials for SIBs.

25 ENERGY STORAGE↗

The Role of Moderate Static Magnetic Fields on Biomineralization of Osteoblasts on Sulfonated Polystryene Films

We have investigated the effects of moderate static magnetic fields (SMFs) on murine MC3T3-E1 osteoblasts, and found that they enhance proliferations and promote differentiation. The increase in proliferation rates in response to SMFs was greater in cultures grown on partially sulfonated polytstyrene (SPS, degree of sulfonation: 33%) than in cultures grown on tissue culture plastic. We have previously shown that when the degree of sulfonation exceeded a critical value (12%) [1], spontaneous fibrillogenesis occured which allowed for direct observation of the ECM fibrillar organization under the influence of external fields. We found that the ECM produced in cultures grown on the SPS in the presence of the SMFs assembled into a lattice with larger dimensions than the ECM of the cultures grown in the absence of SMFs. During the early stages of the biomineralization process (day 7), the SMF exposed cultures also templated mineral deposition more rapidly than the control cultures. The rapid response is attributed to orientation of diamagnetic ECM proteins already present in the serum, which could then initiate further cellular signaling. SMFs also influenced late stage osteoblast differentiation as measured by the increased rate of osteocalcin secretion and gene expression beginning 15 days after SFM exposure. This correlated with a large increase in mineral deposition, and in cell modulus. GIXD and EDXS analysis confirmed early deposition of crystalline hydroxyapatite. Previous studies on the effects of moderate SMF had focused on cellular gene and protein expression, but did not consider the organization of the ECM fibers. Our ability to form these fibers has allowed us explore this additional effect and highlight its significance in the initiation of the biomineralization process.

59 BASIC BIOLOGICAL SCIENCES↗

Effects of hydrogen preconversion on the homogeneous ignition of fuel-lean H{sub 2}/O{sub 2}/N{sub 2}/CO{sub 2} mixtures over platinum at moderate pressures

The impact of fractional hydrogen preconversion on the subsequent homogeneous ignition characteristics of fuel-lean (equivalence ratio {phi} = 0.30) H{sub 2}/O{sub 2}/N{sub 2}/CO{sub 2} mixtures over platinum was investigated experimentally and numerically at pressures of 1, 5 and 8 bar. Experiments were performed in an optically accessible channel-flow reactor and involved Raman measurements of major species over the catalyst boundary layer and planar laser induced fluorescence (LIF) of the OH radical. Simulations were carried out with a 2-D elliptic code that included detailed hetero-/homogeneous chemistry. The predictions reproduced the LIF-measured onset of homogeneous ignition and the Raman-measured transport-limited catalytic hydrogen consumption. For 0% preconversion and wall temperatures in the range 900 K {<=} T{sub w} {<=} 1100 K, homogeneous ignition was largely suppressed for p {>=} 5 bar due to the combined effects of intrinsic gas-phase hydrogen kinetics and the competition between the catalytic and gas-phase pathways for fuel consumption. A moderate increase of preconversion to 30% restored homogeneous combustion for p {>=} 5 bar, despite the fact that the water formed due to the upstream preconversion inhibited homogeneous ignition. The catalytically-produced water inhibited gas-phase combustion, particularly at higher pressures, and this kinetic inhibition was exacerbated by the diffusional imbalance of hydrogen that led to over-stoichiometric amounts of water in the near-wall hot ignitable regions. Radical adsorption/desorption reactions hindered the onset of homogeneous ignition and this effect was more pronounced at 1 bar. On the other hand, over the post-ignition reactor length, radical adsorption/desorption reactions significantly suppressed gas-phase combustion at 5 and 8 bar while their impact at 1 bar was weaker. By increasing hydrogen preconversion, the attained superadiabatic surface temperatures could be effectively suppressed. An inverse catalytically stabilized thermal combustion (CST) concept has been proposed, with gas-phase ignition achieved in an upstream porous burner via radiative and heat conduction feedback from a follow-up catalytic reactor. This arrangement moderated the superadiabatic surface temperatures and required modest or no preheat of the incoming mixture. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hyperpigmentation and higher incidence of cutaneous malignancies in moderate-high PCB- and dioxin exposed individuals

Highlights: • Elevated blood levels of PCBs and dioxins were found in workers of a transformer recycling company. • Higher incidence of acne and malignancies of the skin in PCB- and dioxin exposed workers. • A correlation between hyperpigmentation on the skin and exposure levels in the workers. Polychlorinated biphenyls (PCB) are well known persistent and toxic environmental pollutants. Our aim was to identify effects of moderate-high exposure to dioxin-like (dl) and non-dioxin-like (ndl)-PCBs on the skin in order to provide more insight in the pathophysiological effects of these compounds. We performed a dermatological examination on 92 former workers from a transformer recycling company with known elevated serum PCB and/or dioxin (polychlorinated dibenzo-p-dioxin/polychlorinated dibenzo-p-furan (PCDD/F)) levels. In addition, we performed a skin cancer screening over a period of seven years (2010–2016) on resp. 268, 271, 210, 149, 92, 129 and 79 participants. We found a higher incidence of acne and malignancies of the skin (malignant melanoma, basal cell carcinoma and mycosis fungoides) in the workers compared to normal population. The probability of having hyperpigmentation on the skin was statistically significantly higher in workers with higher sumPCBs- (OR:1.09(1.12–2.17)), dioxin-like (dl)-PCBs- (OR:1.56(1.12–2.17)) and dioxin (PCDD/Fs) (OR:1.09(1.02–1.16)) levels. Age was a confounding factor in this model. Formation of hyperpigmentation could be an indicator for (moderate-high) exposure to toxic compounds like PCBs. The higher incidence of cutaneous malignancies found in the workers might be associated with PCB- and dioxin exposure, warranting further investigation on larger cohorts.

54 ENVIRONMENTAL SCIENCES↗

Toxicity and Outcome Results of a Class Solution With Moderately Hypofractionated Radiotherapy in Inoperable Stage III Non-Small Cell Lung Cancer Using Helical Tomotherapy

Purpose: To prospectively assess the feasibility, toxicity, and local control of a class solution protocol of moderately hypofractionated tomotherapy in Stage III, inoperable, locally advanced non-small-cell lung cancer patients. Methods and Materials: Eligible patients were treated according to a uniform class solution (70.5 Gy in 30 fractions) with fixed constraints and priorities using helical tomotherapy. Toxicity monitoring was performed using the Radiation Therapy Oncology Group criteria and the National Cancer Institute Common Terminology Criteria and Adverse Events (CTCAE) version 3.0. Pulmonary function tests were performed at the start and repeated at 3 months after treatment. Results: Our class solution resulted in a deliverable plan in all 40 consecutive patients. Acute Grade 3 lung toxicity was seen in 10% of patients. Two patients died during acute follow-up with pulmonary toxicity. Correlations were found between changes in pulmonary function test results and mean lung dose or the lung volume receiving 20 Gy (V{sub 20}). The correlation was strongest for lung diffusion capacity for carbon monoxide. A V{sub 20} of >27% and >32% were predictive for Grades 2 and 3 acute lung toxicity respectively (p < 0.05). Late Grade 3 toxicity was exclusively pulmonary, with an incidence of 16%. Overall Grade 3 lung toxicity correlated with a mean lung dose of >18 Gy and a median lung dose of >5 Gy (p < 0.05). Median survival was 17 months, and the 1-year and 2-year local progression-free survivals were 66% and 50%, respectively. Conclusion: The current class solution using moderately hypofractionated helical tomotherapy in patients with locally advanced non-small-cell lung cancer is feasible. Toxicity was acceptable and in line with other reports on intensity-modulated radiotherapy. The local progression-free survival was encouraging considering the unselected population.

62 RADIOLOGY AND NUCLEAR MEDICINE↗