Search NASA⌕ Search

SEARCH · Search NASA

Results for “molecular separations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

SAN-Based Block Polymers as a Platform for Manufacturing Strong Isoporous Membranes

Ultrafiltration (UF) membranes are ubiquitous in water purification and bioprocessing. However, co-designing their mechanical and transport properties remains challenging because of the broad pore size distributions at the surface and within the bulk that result from nonsolvent-induced phase separation (NIPS) – their typical manufacturing process. These distributions influence the hydrodynamic resistance to water flow and the stress concentrations around the pores. Developing advanced UF membranes requires innovative molecular designs that offer control over the surface and bulk pores, as well as the mechanical properties of the load-bearing, polymer. Here, we introduce a platform for designing UF membranes by leveraging solution self-assembly of block polymers and chain architectures with pendant polar groups. The block polymers consist of a poly(styrene-co-acrylonitrile) hydrophobic block, which is known for its strength, and a poly(4-vinyl pyridine) hydrophilic block, which drives solution self-assembly. We focus on a series of block polymers with constant molecular weight, M n ≈ 115 kDa, SAN fraction, 75 wt.%, and varying acrylonitrile content, 0 to 40 mol%, to demonstrate that: (i) RAFT dispersion copolymerization of acrylonitrile and styrene provides a facile route to synthesize strong block polymers, (ii) incorporation of acrylonitrile into the hydrophobic block enhances membrane strength by facilitating chain entanglements and dipole-dipole interactions, and (iii) acrylonitrile alters the balance between membrane permeance and rejection, even when the membranes feature similar surface and bulk pores. Overall, our results provide insights into the molecular design of UF membranes with enhanced mechanical and separation properties, contributing to the development of materials for water and energy technologies.

deformation↗
DOE OSTI2024

A sustainable cobalt separation with validation by techno-economic analysis and life-cycle assessment

Sustainable, cost-effective cobalt/nickel separations chemistry contributes to the realization of economically competitive lithium-ion battery recycling, as well as primary mining of cobalt and nickel. Such improvements can address supply chain challenges for cobalt, a critical element. Herein, we disclose a simple method for separating Co/Ni by second coordination-sphere molecular recognition. Selective cobalt precipitation is achieved using carbonate ions in an ammonia solution due to the outer-sphere, hydrogen bonding interactions between [Co(NH 3 ) 6 ] 3+ and CO 3 2− , evaluated with density functional theory calculations. We demonstrate this method on mixtures of Co/Ni chlorides comprising a 10-fold excess of Ni and provide comparisons with ore-processing systems. High purities (99.4(3)% Co; 98.2(4)% Ni) and recoveries (77(8)% Co; ∼100% Ni) were observed for both Co- and Ni-enriched products using optimized conditions. In conclusion, this method is potentially economically competitive based on initial techno-economic analysis (TEA) and life-cycle assessment (LCA) that also illustrate advantages in terms of sustainability.

cobalt↗
DOE OSTI2025

Janus Superiority of Membranes in Chemical Engineering and Beyond

Janus configurations, characterized by their inherent asymmetry, enable directional mass transfer in membrane materials that drive novel and energy-efficient chemical processes. This Janus superiority spans applications from nanoscale molecular and ionic transport to macro-scale separation systems with asymmetric spatial architectures. This review provides an analysis of the material foundations including design principles, structure regulation, and scalability challenges underlying Janus membranes. Here, we explore the physics that governs their unique behavior and examine their diverse applications across chemical engineering, including phase transfer, and molecular or ionic transport. Through a multiscale perspective, we provide a comprehensive understanding of the impact of Janus superiority in advancing chemical engineering technologies. Finally, we discuss the hurdles in translating theoretical advances into practical applications and propose promising avenues for future research to harness the full potential of Janus membranes and systems in addressing global challenges related to energy, sustainability, and beyond.

Yang, Hao‐Cheng [Zhejiang University, Hangzhou (Ch↗
DOE OSTI2024

Kinetic Separation of Siloxanes in Metal–Organic Frameworks

We present an in silico assessment of metal–organic frameworks (MOFs) for the kinetic separation of linear and cyclic siloxanes. We employed molecular dynamics simulations investigating both rigid and flexible 1D MOF frameworks to identify a specific range of pore parameters that enables the diffusion of linear siloxanes but leads to slow diffusion of cyclic siloxanes. We then extended our analysis to flexible 3D MOFs to select adsorbents for the kinetic separation of cyclic and linear siloxanes. Based on synthesizability metrics we identified four 3D MOFs capable of discriminating between cyclic and linear siloxanes. One of the MOFs with structure code WIYFAM stood out with the ability to distinguish between cyclic and linear siloxanes and facilitate the diffusion of all linear siloxanes investigated in this study. One of the other MOFs, IRMOF-6, is found to be capable of not only discriminating between cyclic and linear siloxanes, but even between shorter and longer linear siloxanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Protein-Enabled Size-Selective Defect-Sealing of Atomically Thin 2D Membranes for Dialysis and Nanoscale Separations

Atomically thin 2D materials present the potential for advancing membrane separations via a combination of high selectivity (from molecular sieving) and high permeance (due to atomic thinness). However, the creation of a high density of precise nanopores (narrow-size-distribution) over large areas in 2D materials remains challenging, and nonselective leakage from nanopore heterogeneity adversely impacts performance. Here, we demonstrate protein-enabled size-selective defect sealing (PDS) for atomically thin graphene membranes over centimeter scale areas by leveraging the size and reactivity of permeating proteins to preferentially seal larger nanopores (≥4 nm) while preserving a significant amount of smaller nanopores (via steric hindrance). Our defect-sealed nanoporous atomically thin membranes (NATMs) show stability up to ~35 days during size-selective diffusive separations with a model dialysis biomolecule fluorescein isothiocyanate (FITC)-Ficoll 70 in phosphate buffer saline (PBS) solution as well as outperform state-of-the-art commercially available dialysis membranes (molecular-weight-cutoff ~3.5–5 kDa and ~8–10 kDa) with significantly higher permeance for smaller solutes KCl (~0.66 nm) ~5.1–6 × 10 –5 ms –1 and vitamin B12 (B12, ~1.5 nm) ~2.8–4 × 10 –6 ms –1 compared to small protein lysozyme (Lz, ~4 nm) ~4–6.4 × 10 –8 m s –1 , thereby allowing unprecedented selectivity for B12/Lz ~70 and KCl/Lz ~1280. Our work introduces proteins as nanoscale tools for size-selective defect sealing in atomically thin membranes to overcome persistent issues and advance separations for dialysis, protein desalting, small molecule separations/purification, and other bioprocesses.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Chemical Diversity of Oligomers in Biomass Fast Pyrolysis Oils, Part 2: Heavy Lignin-Derived Molecules and Highly Dehydrated Sugars from Dichloromethane-Insoluble Pyrolytic Lignin

Here, this paper, the second in a series, investigates the water-insoluble, dichloromethane (DCM)-insoluble residue of BTG pyrolysis oil, also known in the literature as high-molecular-weight pyrolytic lignin (HMW-PL). HMW-PL accounts for 9.2 wt % of the original bio-oil, which is known to increase upon aging and contribute to coke formation during bio-oil upgrading. Understanding its composition is crucial for managing pyrolysis oil during the processing. The HMW-PL was fractionated using a silica gel column with solvents of increasing polarity: ethyl acetate (EA), acetone (AC), isopropanol (ISO), and methanol (MeOH), yielding 49.2, 19.9, 8.2, and 8.1 wt %, respectively. Each subfraction was characterized by UV-fluorescence, FTIR, HSQC NMR, and (−)APCI-FT-Orbitrap MS. Analysis revealed that the EA subfraction primarily contained aromatic dimers (C 19 –C 20 ) and trimers (C 17 –C 13 ), while the MeOH subfraction was rich in oxygenated aliphatic monomers (C 8 –C 16 ) likely derived from sugar dehydration products. The resulting fractions were further separated via preparatory HPLC. Fifty-five candidate molecular structures were proposed based on the Orbitrap MS data, supported by UV-fluorescence, FTIR, and NMR results. This fractionation strategy defined four distinct subfractions, enabling the proposal of surrogate molecular structures and advancing the molecular-level understanding of the HMW-PL fraction in the pyrolysis bio-oil.

High-Molecular-Weight PL↗
DOE OSTI2025

Entropy-Driven Porous Liquids Allowing Gas Solubility in Solvent-Filled Imine-Based Porous Organic Cages

Porous liquids offer a promising platform for gas separation by combining fluid processability with intrinsic molecular porosity. Traditional Type II porous liquids are formed by dissolving porous molecular cages in size-excluded solvents, limiting solvent options and practical applications. In this work, we introduce a novel method of creating Type II porous liquids using common small solvents, where intrinsic porosity is achieved at elevated pressures due to the selective displacement of solvent molecules by gas molecules within the cage structures. Using molecular simulations, we investigate the behavior of CO 2 in solutions of the imine-based porous organic cage CC13 dissolved in small molecular solvents such as chloroform and 1,2-dimethoxyethane (DME). Grand canonical Monte Carlo simulations of solid-state CC13 reveal that selectivity reversal, where smaller CO 2 molecules displace larger solvent molecules inside the cage, is achievable at sufficiently high pressures. Temperature quench molecular dynamics simulations confirm that while CO 2 displacement within chloroform-filled cages is limited, DME enables entropy-driven cage CO 2 occupancy at pressures as low as ∼23 bar, setting up the foundation of an alternative way of forming Type II porous liquids.

adsorption↗
DOE OSTI2025

Driving Selectivity Among Rare Earth Elements through Phase Modifiers

Phase modifiers are low molecular weight molecules added to solvent extraction separations to improve the physical performance of the separation system, for example by increasing the concentration of metal ions that can be separated or improving the compatibility of the two solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1972

Cytochemical studies of planetary microorganisms - Explorations in exobiology

Analytical methodology using gas chromatography and mass spectrography for improved physiological monitoring of astronauts is developed. Reported research covers the following topics: (1) Chlorination of DNA bases; (2) mass fragmentography; (3) mass spectrometry; (4) urine analysis for metabolic constituents; (5) analysis of natural products by mass spectrometry; (6) computer identification of unknown molecular compounds; (7) fluorescent sorter for cell separation; (8) Mariner Mars 1971 orbital photography; and (9) Viking Lander imagery.

Lederberg, J.↗
NASA NTRS1976

Molecular outgassing measurements for an element of the Shuttle thermal protection system

Molecular outgassing studies were conducted on a thermal-protection material recently developed for the Shuttle Orbiter. Molecular outgassing rates as low as 10 to the minus 11th g/sq cm/sec, condensation coefficients, and molecular desorption rates were measured in four separate experiments using cryogenically and thermoelectrically cooled quartz crystal microbalances. Although the initial outgassing rates are high, they decreased to values in the 10 to the minus 10th g/sq cm/sec range in a reasonable period of time. Outgassing rates do not increase after entry heating although the condensation coefficients at various microbalance collection-surface temperatures become somewhat larger.

Visentine, J. T.↗
NASA NTRS1976

Bioprocessing development: Immune/cellular applications: Anti-Ig autoantibody and complement-mediated destruction of neoplastic cells

This space bioprocessing contract effort was comprised of four general objectives. These were: (1) the evaluation of current separation processes, (2) the identification of problems relevant to the separation of important biologicals, (3) the identification of ground-based assay methods needed for pre- and postflight analysis of space bioprocessing separation technology; and (4) the establishment of methods to determine the efficiency of space bioprocessing separation procedures. Immunology was deemed advantageous to study the diversity of cells and cell products involved and the extensive interest being given to their separation. Upon recognition of a cellular or molecular agent as foreign to the body, the immune system becomes activated to produce cells whose function is to destroy that agent and cell products whose function is to inactivate the agent and assist in its destruction. Long after the agent is removed from the body, some cells remain in a state of readiness to continue these destructive actions specifically against that agent should further exposure to it occur. This is the basis of acquired immunity to disease.

Twomey, J. J.↗
NASA NTRS1991

Ionized carbon in the Large Magellanic Cloud

The 158 micron 2P3/2-2P1/2 fine-structure transition of C(+) at selected locations in the LMC. The C II emission is most intense toward far-infrared continuum peaks and generally is not seen in positions exhibiting strong CO J = 2-1 radiation. Where both C II and CO emission are detected, the V(LSR) centroids are similar but the C II line is wider. The differences in spatial distribution and spectral shape suggest a more pronounced physical separation between the predominantly neutral atomic and molecular gas regions than is the case in the Galaxy. In the LMC, the intense and extended C II emission near 30 Dor implies a total amount of C(+) several times greater than that of Galactic molecular cloud complexes. An attempt was made to detect the 289 micron J = 9-8 transition of (C-12)O in a few locations. The observed upper intensity limit for N159 implies that moderate density molecular gas fills less than 5 percent of the beam and that most of the low J CO emission comes from lower density gas.

Boreiko, R. T.↗
NASA NTRS1994

Carbon recombination lines as a diagnostic of photodissociation regions

We have observed the C91 alpha radio recombination line toward the Orion H II region. This narrow (approximately 3-5 km per sec full width at half maximum (FWHM)) line is spatially very extended (approximately 8 arcmin or 1 pc). These charateristics compare well with the observed characteristics of the C II fine structure line at 158 microns. Thus, the C91 alpha line originates in the predominantly neutral photodissociation regions separating the H II region from the molecular cloud. We have developed theoretical models for the C II radio recombination lines from photodissociation regions. The results show that the I(C91 alpha)/I(C158) intensity ratio is a sensitive function of the temperature and density of the emitting gas. We have also extended theoretical models for photodissociation regions to include the C II recombination lines. Comparison with these models show that, in the central portion of the Orion region, the C91 alpha line originates in dense (10(exp 6) per cu cm), warm (500-1000 K) gas. Even at large projected distances (approximately 1 pc), the inferred density is still high (10(exp 5) per cu cm) and implies extremely high thermal pressures. As in the case of the (C II) 158 microns line, the large extent of the C91 alpha line shows that (FUV) photons can penetrate to large distances from the illuminating source. The decline of the intensity of the incident radiation field with distance from Theta(sup 1) C seems to be dominated by geometrical dilution, rather than dust extinction. Finally, we have used our models to calculate the intensity of the 9850 A recombination line of C II. The physical conditions inferred from this line are in good agreement with those determined from the radio recombination and the far-infrared fine-structure lines. We show that the ratio of the 9850 A to the C91 alpha lines is a very good probe of very high density clumps.

Natta, A.↗
NASA NTRS2007

Electron-Molecule Col1isions: Quantitative Approaches, and the Legacy of Aaron Temkin

This article, on electron-molecule collisions, is dedicated to the legacy of my good friend and sometime collaborator, Aaron Temkin on his retirement from the NASA-Goddard Space Flight Center after many years of work at the highest intellectual level in the theoretical treatment of electron-atom and electron-molecule scattering. Aaron's contributions to the manner in which we think about electron-molecule collisions is clear to all of us who have worked in this field. I doubt that the great progress that has occurred in the computational treatment of such complex collision problems could have happened without these contributions. For a brief historical account, see the discussion of Temkin's contribution to electron-molecule scattering in the first article of this volume by Dr. A. K. Bhatia. In this article, I will concentrate on the application of the so called, non-adiabatic R-matrix theory, to vibrational excitation and dissociative attachment, although I will also present some results applying the Linear Algebraic and Kohn-Variational methods to vibrational excitation. As a starting point for almost all computationally effective approaches to electron-molecule collisions, is the fixed nuclei approximation. That is, one recognizes, just as one does with molecular bound states, that there is a separation of electronic(fast) and nuclear(s1ow) degrees of freedom. This separation makes it possible to "freeze" the nuclei in space, calculate the collision parameters for the frozen molecule and then, somehow to add back the vibrations and rotations. The manner in which this is done, depends on the details of the collision problem. It is the work of Aaron and a number of other researchers that has provided the guidance necessary to resolve these issues.

Schneider, B.I.↗
DOE OSTI2025

Temperature-Dependent Molecular Diffusional Properties in Deep Eutectic Solvents and Eutectogels

Eutectogels (ETGs) prepared from deep eutectic solvents (DESs), a gelator, and water have many uses in separations, catalysis, and energy storage systems. In these applications, temperature-dependent molecular diffusional properties and intermolecular interactions play a critical role in their function. Diffusional properties of Alexa Fluor 633 and ATTO 647N were measured across a range of temperatures in choline chloride:2glycerol DESs comprised of one molar equivalent of choline chloride and two molar equivalents of glycerol (also known as glyceline) as well as ETGs made from this DES, a xanthan gum gelator, and 10% w/w water or 20% w/w water. Fluorescence recovery after photobleaching (FRAP) was employed to evaluate potential changes in molecular diffusion within DESs and ETGs from 20 to 100 °C. Surprisingly, the ETGs have a larger sample viscosity but also exhibit faster molecular diffusion when compared to the dry DES. This is attributed to macroscopic properties of the ETGs (e.g., pores, three-dimensional structure). The FRAP data also show an irreversible temperature-dependent decrease in the diffusion coefficient of both fluorophores in the ETGs. This is consistent with differential scanning calorimetry data of the ETG, which shows a shift to a more negative glass transition temperature (−36 °C to −47 °C) after the first cooling/heating cycle. Raman data reveal no detectable changes in the intermolecular interactions in either the DESs or ETGs as a function of temperature or water content. Finally, the findings on temperature- and water-dependent diffusional properties of DESs and ETGs provide a foundation for optimizing the use of these materials across various applications, particularly where repeated heating/cooling cycles may be used.

alcohols↗
DOE OSTI2024

Native frames: An approach for separating sequential and concerted three-body fragmentation

Disentangling sequential and concerted three-body fragmentation has been a longstanding endeavor in studies of molecular dynamics. To accomplish this goal, we recently introduced a novel method to separate sequential from concerted breakup, where the sequential events are analyzed in their native frames [J. Rajput et al., Phys. Rev. Lett. 120, 103001 (2018)]. The essence of this method is the use of the Jacobi coordinates' conjugate momenta to reduce the dimensionality of the multibody fragmentation in combination with a clear signature for sequential breakup. To demonstrate this method, we employ coincidence momentum imaging to study the strong-field dissociative ionization of OCS into O + +C + + S + , which typically undergoes concerted fragmentation or sequential breakup involving either a metastable CO 2+ or CS 2+ molecule. We identify sequential breakup using a uniform distribution as a function of the angle between the conjugate momenta, associated with the first and second fragmentation steps, which is due to the rotation of the intermediate molecule in the fragmentation plane. Furthermore, by exploiting this uniform distribution, we separate the sequential and concerted distributions in any plot created from the measured momenta.

Atomic & molecular processes in external fields↗
DOE OSTI2025

Solvent Polarity Independent Symmetry-Breaking Charge Separation in a Slip-Stacked Covalent Terrylene Monoimide Dimer

The design of organic materials capable of efficient photoinduced charge separation in low-polarity environments is a critical challenge for advancing organic photovoltaics. Symmetry-breaking charge separation (SB-CS) offers a promising route to efficient charge separation with minimal energy loss; however, in conventional organic materials this process typically relies on polar solvents to stabilize the charge-separated state. Here, we investigate a slip-stacked terrylene monoimide dimer (TMI 2 ) engineered with intrinsic electronic asymmetry to circumvent this limitation. We demonstrate through a comprehensive suite of ultrafast spectroscopic techniques that TMI 2 undergoes remarkably efficient SB-CS regardless of solvent polarity enabled by the permanent dipole moment of TMI and the accessible intramolecular charge-transfer (ICT) character of its monomer units. Furthermore, analysis of vibronic coherences reveals that the initial state mixing is actively driven by a 193 cm –1 intermolecular mode, while the final SB-CS state is marked by a distinct vibrational fingerprint of the radical ion pair product. Our findings reveal how the intrinsic electronic asymmetry of the TMI monomers that constitute TMI 2 creates an efficient charge separation pathway that precludes the need for external stabilization from a polar solvent. Here, this work establishes a powerful molecular design principle for leveraging intrinsic monomeric asymmetry to achieve efficient charge separation in low-dielectric environments, with significant implications for the development of next-generation organic optoelectronic materials.

Aromatic compounds↗
DOE OSTI2025

Molecular Interlocking Multidimensional Modulations of Cathode‐Electrolyte Interface for Constructing High Energy Density Quasi‐Solid‐State Batteries

Gel polymers are regarded as a promising candidate electrolyte for lithium-metal quasi-solid-state batteries, primarily due to their high ionic conductivity and solid-liquid synergistic properties. However, challenges such as interfacial side reactions, limitations in Li + transport caused by interfacial issues, and leaching of transition metals from the cathode have yet to be effectively solved. Herein, a novel gel electrolyte modulation strategy based on electrostatic filler assembly is proposed to address the issues of ineffective capacity utilization and inadequate cycling stability of high-energy-density cathode materials in solid-state lithium-ion batteries. It constructs a 3D interpenetrating charge-bridge network that effectively tackles the phase-separation challenge between fillers and electrolytes at the molecular level. Meanwhile, the molecular interlocking structure effectively inhibits the electrolyte erosion. More critically, it optimizes and stabilizes the cathode-electrolyte interface film, which facilitates the conduction of Li + -ions through a size-sieving mechanism. Consequently, this strategy enables effective adaptation across diverse high-energy-density cathode materials with satisfactory capacity performance (170.4 mAh g −1 at 4.5 V/1 C for LiNi 0.6 Co 0.2 Mn 0.2 O 2 and 194.0 mAh g −1 at 4.3 V/1 C for LiNi 0.9 Co 0.08 Mn 0.02 O 2 ). In conclusion, this investigation offers a straightforward and effective reference for addressing the critical challenges of ionic transport and interface stabilization in the design of gel electrolytes.

cathode-electrolyte interface↗