Search NASA⌕ Search

SEARCH · Search NASA

Results for “multifunctional material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Crystallization of binary nanocrystal superlattices and the relevance of short-range attraction

The synthesis of binary nanocrystal superlattices (BNSLs) enables the targeted integration of orthogonal physical properties, such as photoluminescence and magnetism, into a single superstructure, unlocking a vast design space for multifunctional materials. However, the formation mechanism of BNSLs remains poorly understood, restricting the prediction of the structure and properties of superlattices. Here we use a combination of in situ scattering and molecular simulation to elucidate the self-assembly of two common BNSLs (AlB 2 and NaZn 13 ) through emulsion templating. Our self-assembly experiments reveal that no intermediate structures precede the formation of the final binary phases, indicating that their formation proceeds through classical nucleation. Using simulations, we find that, despite the formation of AlB 2 and NaZn 13 typically being attributed to entropy, their self-assembly is most consistent with the nanocrystals possessing short-range interparticle attraction, which we find can accelerate nucleation kinetics in BNSLs. Here, we also find homogeneous, classical nucleation in simulations, corroborating our experiments. These results establish a robust correspondence between experiment and theory, paving the way towards prediction of BNSLs.

36 MATERIALS SCIENCE↗

Phosphate modified ceria as a Brønsted acidic/redox multifunctional catalyst

Deposition of trimethylphosphate onto ceria followed by thermal treatment resulted in the formation of surface phosphates with retention of the ceria fluorite structure. The structural and chemical properties of the phosphate-functionalized ceria were studied using 31 P solid-state NMR, XPS, zeta titration, ammonia thermal desorption, pyridine adsorption, and model reactions. The introduction of phosphates generated Brønsted acid sites and decreased the number of Lewis acid sites on the surface. The relative amount of Lewis and Brønsted acids can be controlled by the amount of trimethylphosphate used in the synthesis. Upon deposition of Pd, the multifunctional material showed enhanced activity for the hydrogenolysis of eugenol and guaiacol compared to Pd on the unmodified ceria support. As a result, this was attributed to the cooperativity between the Lewis acid sites, which activate the substrate for dearomatization, and the redox/Brønsted acid properties, which catalyze hydrogenolysis.

36 MATERIALS SCIENCE↗

Methacrylated gelatin-embedded fabrication of 3D graphene-supported Co 3 O 4 nanoparticles for water splitting

In this work, we developed a general platform for the fabrication of transition metal oxide nanoparticles supported by a graphene foam (GF) by first coating it with a methacrylated gelatin (GelMA) hydrogel, which served as a 3D matrix for nanoparticle dispersion. The engineered GelMA/GF matrix was hydrophilic with good mechanical strength and high conductivity, therefore providing a good platform for the dispersion of a variety of metal/oxide precursors. Due to this platform, well-dispersed Co 3 O 4 nanoparticles with the smallest size of 3 nm assembled on the nitrogen-doped graphene foam (Co 3 O 4 /NGF). The crystalline transformation from a CoCl 2 [H 2 O] 2 precursor to Co 3 O 4 was revealed by in operando X-ray diffraction and absorption techniques. After applying Co 3 O 4 /NGF as a free-standing electrocatalyst for water splitting, the nanoparticles of size 3 nm exhibited optimal catalytic activity in alkaline media; the corresponding cell could promote water splitting at a current density of 10 mA cm -2 with only 1.63 V and exhibited excellent stability in a 25 h long-term operation. Our results demonstrate that the GelMA hydrogel-coated 3D graphene foam can be a promising platform for the design and fabrication of graphene-based multifunctional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unusual electronic transport in (1 - x )Cu 2 Se-( x )CuInSe 2 hierarchical composites

The ability to control the relative density of electronic point defects as well as their energy distribution in semiconductors could afford a systematic modulation of their electronic, optical, and optoelectronic properties. Using a model binary hybrid system Cu 2 Se–CuInSe 2 , we have investigated the correlation between phase composition, microstructure, and electronic transport behavior in the synthesized composites. We found that both Cu 2 Se and CuInSe 2 phases coexist at multiple length scales, ranging from sub-ten nanometer to several micrometers, leading to the formation of a hybrid hierarchical microstructure. Astonishingly, the electronic phase diagram of the (1 - x)Cu 2 Se–(x)CuInSe 2 (15% ≤ x ≤ 100%) hierarchical composites remarkably deviates from the trend normally expected for composites between a heavily doped semiconductor (Cu 2 Se) and a poorly conducting phase (CuInSe 2 ). A sudden 3-fold increase in the electrical conductivity and carrier concentration along with a marginal increase in the carrier mobility is observed for composites at the vicinity of equimolar composition (48% ≤ x ≤ 52%). The carrier concentration increases from ~1.5 × 10 20 cm -3 for the composites with x ≤ 45% to 5.0 × 10 20 cm -3 for x = 50%, and remains constant at 4.5 × 10 20 cm -3 with x value in the range of 52% < x ≤ 90%, then quickly drops to 8 × 10 18 cm -3 for pristine CuInSe 2 phase (x = 100%). The atypical electronic behavior was rationalized in the light of the formation of an inter-band (IB) within the band gap, which arises from the hybridization of native electronic point defects from both Cu 2 Se and CuInSe 2 phases in the resulting hierarchical composites. The result points to a new strategy to modulate the electronic structure of semiconductor composites to maximize interaction and coupling between two fundamentally contrasting properties enabling access to electronic hybrid systems with potential applications as interactive and stimuli-responsive multifunctional materials.

36 MATERIALS SCIENCE↗

Upconversion luminescence, ferroelectrics and piezoelectrics of Er Doped SrBi{sub 4}Ti{sub 4}O{sub 15}

Er{sup 3+} doped SrBi{sub 4}Ti{sub 4}O{sub 15} (SBT) bismuth layered-structure ferroelectric ceramics were synthesized by the traditional solid-state method, and their upconversion photoluminescent (UC) properties were investigated as a function of Er{sup 3+} concentration and incident pump power. Green (555 nm) and red (670 nm) emission bands were obtained under 980 nm excitation at room temperature, which corresponded to the radiative transitions from {sup 4}S{sub 3/2}, and {sup 4}F{sub 9/2} to {sup 4}I{sub 15/2}, respectively. The emission color of the samples could be changed with moderating the doping concentrations. The dependence of UC intensity on pumping power indicated a two-photon emission process. Studies on dielectric properties indicated that the introduction of Er increased the ferroelectric-paraelectric phase transition temperature (Tc) of SBT, thus making this ceramic suitable for piezoelectric sensor applications at higher temperatures. Piezoelectric measurement showed that the doped SBT had a relative higher piezoelectric constant d{sub 33} compared with the non-doped ceramics. The thermal annealing behaviors of the doped sample revealed a stable piezoelectric property. The doped SBT showed bright UC emission while simultaneously having increased Tc and d{sub 33}. As a multifunctional material, Er doped SBT ferroelectric oxide showed great potential in application of sensor, future optical-electro integration and coupling devices.

36 MATERIALS SCIENCE↗

Luminescent, dielectric, and ferroelectric properties of Pr doped Bi{sub 7}Ti{sub 4}NbO{sub 21} multifunctional ceramics

Pr doped Bi{sub 7}Ti{sub 4}NbO{sub 21} (BTN) multifunctional ceramics were prepared by a conventional sintering technique and their luminescent, dielectric, and ferroelectric properties were investigated. The X-ray diffraction data showed that the samples were single phase, and the scanning electron microscopy image indicated that the ceramics had flake-like grains with uniform thickness. The red emission was observed under the ultraviolet and blue light excitation at room temperature. The thermal quench of luminescence was measured and the result indicated that Pr doped BTN ceramics might be potentially applied in luminescent probes and temperature sensors. With the increasing Pr{sup 3+} content, the intensity of the photoluminescence increased initially and then decreased due to concentration quenching; The Curie temperature T{sub c} was slightly shifted to the lower temperature; the ferroelectric properties was almost unchanged by doping. As a new multifunctional material, the Pr doped BTN ceramics could be used for a wide range of application, such as integrated electro-optical devices.

36 MATERIALS SCIENCE↗

Role of phonon scattering by elastic strain field in thermoelectric Sr{sub 1−x}Y{sub x}TiO{sub 3−δ}

Perovskite-type SrTiO{sub 3−δ} ceramics are multifunctional materials with significant potential as n-type thermoelectric (TE) materials. The electronic and thermal transport properties of spark plasma sintered polycrystalline Sr{sub 1−x}Y{sub x}TiO{sub 3−δ} (x = 0.05, 0.075, 0.1) ceramics are systematically investigated from (15–800) K. The Sr{sub 0.9}Y{sub 0.1}TiO{sub 3−δ} simultaneously exhibits a large Seebeck coefficient, α > −80 μV/K and moderately high electrical resistivity, ρ ∼ 0.8 mΩ-cm at a carrier concentration of ∼10{sup 21} cm{sup −3} at 300 K resulting in a high TE power factor defined herein as (α{sup 2}σT) ∼ 0.84 W/m-K at 760 K. Despite the similar atomic masses of Sr (87.6 g/mol) and Y (88.9 g/mol), the lattice thermal conductivity (κ{sub L}) of Sr{sub 1−x}Y{sub x}TiO{sub 3−δ} is significantly reduced with increased Y-doping, owing to the smaller ionic radii of Y{sup 3+} (∼1.23 Å, coordination number 12) compared to Sr{sup 2+} (∼1.44 Å, coordination number 12) ions. In order to understand the thermal conductivity reduction mechanism, the κ{sub L} in the Sr{sub 1−x}Y{sub x}TiO{sub 3−δ} series are phenomenologically modeled with a modified Callaway's equation from 30–600 K. Phonon scattering by elastic strain field due to ionic radii mismatch is found to be the prominent scattering mechanism in reducing κ{sub L} of these materials. In addition, the effect of Y-doping on the elastic moduli of Sr{sub 1−x}Y{sub x}TiO{sub 3−δ} (x = 0, 0.1) is investigated using resonant ultrasound spectroscopy, which exhibits an anomaly in x = 0.1 in the temperature range 300–600 K. As a result, the phonon mean free path is found to be further reduced in the Sr{sub 0.9}Y{sub 0.1}TiO{sub 3−δ} compared to that of SrTiO{sub 3−δ}, resulting in a considerably low thermal conductivity κ ∼ 2.7 W/m-K at 760 K. Finally, we report a thermoelectric figure of merit (ZT) ∼ 0.3 at 760 K in the Sr{sub 0.9}Y{sub 0.1}TiO{sub 3−δ}, the highest ZT value reported in the Y-doped SrTiO{sub 3} ceramics thus far.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pyrochlore-type lanthanide titanates and zirconates: Synthesis, structural peculiarities, and properties

This contribution provides a thorough examination of the structural characteristics of pyrochlore-type lanthanide titanates and zirconates Ln2Ti2O7 and Ln2Zr2O7, across various length scales. This paper also examines their processing, interesting physical properties (electrical, magnetic, and thermal characteristics), and responses to high pressure and ion irradiation. Brief sections on the elemental oxides' crystal chemistry, pertinent phase diagrams, and energetics of defect formation are also provided. Pyrochlore-type Ln2Ti2O7 and Ln2Zr2O7 stand out as truly multifunctional materials. Moreover, they have emerged as fascinating materials due to magnetic geometrical frustration, arising from the ordering of magnetic Ln3+ and non-magnetic Ti4+ (or Zr4+) cations into separate, interpenetrating lattices of corner-sharing tetrahedra. This results in a diverse array of exotic magnetic ground states, such as spin-ice (e.g., Dy2Ti2O7 or Ho2Ti2O7) or quantum spin ice (e.g., Tb2Ti2O7), observed at both low and room temperatures. They also exhibit varied electrical and electrochemical characteristics. Some members such as Gd2Zr2O7, function as fast ion conductors with a conductivity (σ) of ≈10−2 S·cm−1 at 800 °C and activation energy (Ea) ranging from 0.85 to 1.52 eV, depending on the degree of structural disorder. Others, such as Gd2TiMoO7, are mixed ionic-electronic conductors with σ ≈ 25 S·cm−1 at 1000 °C, making them promising candidate materials for applications in energy conversion and storage devices and oxygen separation membranes. Their exceptionally low thermal conductivity (e.g., κ ∼ 1.1–1.7 W·m−1·K−1 between 700 and 1200 °C for Ln2Zr2O7), close to the glass-like lower limit of highly disordered solids, positions them as valuable materials for thermal barrier coatings. They can also effectively accommodate actinides (e.g., Pu, Np, Cm, Am) in solid solutions and sustain prolonged exposure to radiation due to alpha-decay events, while preserving the integrity of the periodic atomic structure. Proposed as major components in actinide-bearing ceramics, they contribute to the long-term immobilization and disposal of long-lived waste radionuclides from nuclear programs. Some of these properties are displayed simultaneously, opening avenues for new applications. Despite the wealth of data available in the literature, this review highlights the need for a better understanding of order/disorder processes in pyrochlore-type materials and the influence of the structural length scale on their physical and chemical properties. Recent experimental evidence has revealed that pyrochlore short-range structure is far more complex than originally thought. Moreover, pyrochlore local structure is now believed to include short-range, lower symmetry, ordered domains, such as the orthorhombic weberite-type of structure. Notably, short- and long-range structures appear decoupled across different length scales and temperature regimes, and these differences persist even in well-ordered samples. We believe that the pyrochlore structure offers a unique opportunity for examining the interplay between chemical composition, defect chemistry, and properties. In Memoriam: Rodney C. Ewing, Fondly Remembered.

Physics↗

Linking NH$^+_4$ motion to magnetism in molecular multiferroic (NH 4 ) 2 ⁢[FeCl 5 ⁢(H 2 ⁢O)]: A neutron vibrational spectroscopy study

Here, we present a neutron vibrational spectroscopy study to investigate the influence of NH$^+_4$ motion on the magnetism in [(NH 4 ) 1–x K x ] 2 ⁢[FeCl 5 ⁢(H 2 ⁢O)]. The parent compounds, (NH 4 ) 2 ⁢[FeCl 5 ⁢(H 2 ⁢O)] (x = 0) and K 2 ⁡[FeCl 5 ⁢(H 2 ⁢O)]⁢(x = 1) are isostructural at room temperature, yet displaying drastically different magnetic and multiferroic behavior. K 2 ⁡[FeCl 5 ⁢(H 2 ⁢O)] is nonmultiferroic with type-A collinear antiferromagnetic structure below T N ≈ 14.06 K, whereas (NH 4 ) 2 ⁢[FeCl 5 ⁢(H 2 ⁢O)] is a type-II multiferroic with incommensurate cycloidal spin structure below T FE ≈ 6.8 K. A recent study of the dielectric, structure, and magnetic properties in the mixed [(NH 4 ) 1–x ⁢K x ] 2 ⁢[FeCl 5 ⁢(H 2 ⁢O)] shows that a small amount of potassium substitution to replace NH$^+_4$ transforms the spin structure from incommensurate cycloidal (x ≤ 0.06) into commensurate collinear antiferromagnetic (x ≥ 0.15), indicating NH$^+_4$ is essential to the emergent phenomena observed in this molecular multiferroic compound. Our vibrational spectroscopy study reveals that NH$^+_4$ libration and torsion motion exhibit substantial temperature dependence at low temperatures. The intensity of NH$^+_4$ libration and torsion modes increases slightly at 5 K in comparison with data at 25 K behaving like a magnon, indicating that they are coupled to the magnetism in (NH 4 ) 2 ⁢[FeCl 5 ⁢(H 2 ⁢O)]. Comparing data of x=0, 0.06, 0.09, and 0.15 samples further illustrates that the strength of the increased signal in NH$^+_4$ libration mode is very sensitive to potassium concentration. The signal diminishes quickly with increasing potassium concentration and vanishes in the x = 0.15 sample corresponding to the magnetic structure change for x ≥ 0.15. The results directly link the anomalous behavior in NH$^+_4$ libration motion to the magnetism in [(NH 4 ) 1–x ⁢K x ] 2 ⁢[FeCl 5 ⁢(H 2 ⁢O)], providing new insights into the crucial role NH$^+_4$ plays in the coupled phenomena in (NH 4 ) 2 ⁢[FeCl 5 ⁢(H 2 ⁢O)]. The unique information opens a new door to go through in searching for new multifunctional materials by incorporation of NH 4 via a material-by-design approach.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Transition Dynamics in a Complex Oxide Heterostructure

Understanding the behavior of defects in the complex oxides is key to controlling myriad ionic and electronic properties in these multifunctional materials. The observation of defect dynamics, however, requires a unique probe-one sensitive to the configuration of defects as well as its time evolution. Here, we present measurements of oxygen vacancy ordering in epitaxial thin films of SrCoO x and the brownmillerite-perovskite phase transition employing x-ray photon correlation spectroscopy. These and associated synchrotron measurements and theory calculations reveal the close interaction between the kinetics and the dynamics of the phase transition, showing how spatial and temporal fluctuations of heterointerface evolve during the transformation process. The energetics of the transition are correlated with the behavior of oxygen vacancies, and the dimensionality of the transformation is shown to depend strongly on whether the phase is undergoing oxidation or reduction. Finally, the experimental and theoretical methods described here are broadly applicable to in situ measurements of dynamic phase behavior and demonstrate how coherence may be employed for novel studies of the complex oxides as enabled by the arrival of fourth-generation hard x-ray coherent light sources.

36 MATERIALS SCIENCE↗

Formation of two-dimensional electron and hole gases at the interface of half-Heusler semiconductors

Heuslers are a prominent family of multifunctional materials that includes semiconductors, half metals, topological semimetals, and magnetic superconductors. Owing to their same crystalline structure, yet quite different electronic properties and flexibility in chemical composition, Heusler-based heterostructures can be designed to show intriguing properties at the interface. Using electronic structure calculations, we show that two-dimensional electron or hole gases (2DEG or 2DHG) form at the interface of half-Heusler (HH) semiconductors without any chemical doping. We use CoTiSb/NiTiSn as an example, and show that the 2DEG at the TiSb/Ni(001) termination and the 2DHG at the Co/TiSn(001) termination are intrinsic to the interface, and hold rather high charge densities of 3 × 10 14 carriers/cm 2 . These excess charge carriers are tightly bound to the interface plane and are fully accommodated in transition-metal d subbands. Furthermore, the formation of 2DEG and 2DHG are not specific to the CoTiSb/NiTiSn system; a list of combinations of HH semiconductors that are predicted to form 2DEG or 2DHG is provided based on band alignment, interface termination, and lattice mismatch.

36 MATERIALS SCIENCE↗

Leveraging Additive Manufacturing to Fabricate High Temperature Alloys With Co-Designed Mechanical Properties and Environmental Resistance

A paradigm shift in the traditional sequential design approaches is critically essential to create application-specific hierarchical and multifunctional materials with superior long-term performance for next-generation energy technologies involving extreme environments. In the current work, we aim to leverage the flexibility and geometric/compositional complexity offered by additive manufacturing to demonstrate this new approach by codesigning a compositionally graded Ni-based alloy for molten salts\sCO 2 heat exchangers to enable mitigation of environmental degradation of surfaces exposed to molten halide salts, while simultaneously suppressing the consequent deterioration in mechanical stability. Further, thermokinetic modeling describing the underlying physics of thermally- and environmentally induced spatiotemporal compositional and microstructural evolution will be employed to predict the parameter space of material deposition processes and precisely identify the required composition gradient. Preliminary corrosion and mechanical testing of the dual material demonstrated the potential of the material to replace existing solid solution strengthened materials for this application.

36 MATERIALS SCIENCE↗

Determining the Length Scale of Transport Impedances in Li-Ion Electrodes: Li(Ni 0.33 Mn 0.33 Co 0.33 )O 2

Battery cathodes are complex multiscale, multifunctional materials. The length scale at which the dominant impedance arises may be difficult to determine even with the most advanced experimental characterization efforts, and thus modeling can play an important role in analysis. Discharge and voltage relaxation curves, interrogated with theory, are used to distinguish between transport impedance that arise on the scale of the active crystal and on the scale of agglomerates (secondary particles) comprised of nanoscale crystals. Model-selection algorithms are applied to determine that the agglomerate scale is dominant in the Li Ni 0.33 Mn 0.33 Co 0.33 O 2 electrode studied here. Furthermore, conditions where the agglomerate and crystal-scale models yield distinct simulation results are demonstrated, providing approaches that can be applied to other systems.

25 ENERGY STORAGE↗

Metal–organic frameworks for electronics and photonics

Metal–organic frameworks (MOFs), with their crystalline nanoporous three-dimensional structures, have emerged as unique multifunctional materials that combine high porosity with catalytic, photophysical, or other properties to reveal new fundamental science and applications. Because MOFs are composed of organic molecules linking metal centers in ways that are not usually conducive to the formation of free-charge carriers or low-energy charge-transport pathways, they are typically insulators. Accordingly, applications so far have harnessed the unique structural properties and porosity of MOFs, which depend only to a small extent on the ability to manipulate their electronic structure. An exciting new area has emerged due to the recent demonstration of MOFs with controlled electronic and optical properties, which is enabling new fundamental science and opens up the possibility of applications in electronics and photonics. This article presents an overview of the fundamental science issues related to controlling electronic and optical properties of MOFs, and how research groups worldwide have been exploring such properties for electronics, thermoelectrics, photophysics, and charge storage.

solar (photovoltaic), solid state lighting, photos↗

Progress Report 2011: Understanding compound phase transitions in Heusler alloy giant magnetocaloric materials

Our goal is to gain insight into the fundamental physics that is responsible for magnetocaloric effects (MCE) and related properties at the atomic level. We are currently conducting a systematic study on the effects of atomic substitutions in Ni2MnGa-based alloys, and also exploring related full- and half-Heusler alloys, for example Ni-Mn-X (X=In, Sn, Sb), that exhibit a wide variety of interesting and potentially useful physical phenomena. It is already known that the magnetocaloric effect in the Heusler alloys is fundamentally connected to other interesting phenomena such as shape-memory properties. And the large magnetic entropy change in Ni2Mn0.75Cu0.25Ga has been attributed to the coupling of the first-order, martensitic transition with the second-order ferromagnetic paramagnetic (FM-PM) transition. Our research to this point has focused on understanding the fundamental physics at the origin of these complex, compound phase transitions, and the novel properties that emerge. We synthesize the materials using a variety of techniques, and explore their material properties through structural, magnetic, transport, and thermo-magnetic measurements.

36 MATERIALS SCIENCE↗

Theoretical Studies of Spin Crossover Metal-Organic Frameworks

The research carried out within this grant focused on characterizing spin crossover (SCO) transitions, i.e., the change in spin state, in metal-organic frameworks (MOFs). MOFs are three-dimensional networks in which metal ions or clusters are connected to multidentate ligands. By combining high porosity, large surface area, guest selectivity, structural flexibility, and SCO properties, MOFs provide a promising platform for the development of multifunctional materials, such as molecular switches, memory devices, and chemical sensors. To characterize the SCO properties of MOFs at the molecular level, we have developed a hybrid Monte Carlo / molecular dynamics (MC/MD) method that builds upon the ligand field molecular mechanics (LFMM) model. Within LFMM, conventional molecular mechanics (MM) energy expressions are supplemented with an additional term that effectively represents the ligand field stabilization energy (LFSE) arising from the splitting and different occupation of the d-based molecular orbitals. LFMM thus explicitly includes energy contributions that depend on both the instantaneous coordination geometry and the electronic structure of the metal centers. In our MC/MD method, the original LFMM model is combined with a Monte Carlo scheme based on the Metropolis acceptance/rejection criterion that is used to model spin-crossover transitions in bulk materials with multiple metal centers. We have applied our hybrid MC/MD method to investigate the SCO behavior of {Fe(pz)[Pt(CN) 4 ]}, a prototypical MOF, upon adsorption of various guest molecules. In all cases, excellent agreement was found with the available experimental data, which allowed us to develop a fundamental understanding of the molecular mechanisms that govern spin transitions in MOFs. By correlating molecular-level guest molecule-framework interactions with macroscopic SCO properties, our analysis provides design principles, at the fundamental level, for the development of MOF materials that can efficiently exploit the energy differences between spin states for gas detection and molecular sensing.

36 MATERIALS SCIENCE↗

Graphite/Ultra-High Modulus Polyethylene Hybrid Fiber Composites with Epoxy and Polyethylene Matrices for Cosmic Radiation Shielding

One of the most significant technical challenges in long-duration space missions is that of protecting the crew from harmful radiation. Protection against such radiation on a manned Mars mission will be of vital importance both during transit and while on the surface of the planet. The development of multifunctional materials that serve as integral structural members of the space vehicle and provide the necessary radiation shielding for the crew would be both mission enabling and cost effective. Additionally, combining shielding and structure could reduce total vehicle mass. Hybrid laminated composite materials having both ultramodulus polyethylene (PE) and graphite fibers in epoxy and PE matrices could meet such mission requirements. PE fibers have excellent physical properties, including the highest specific strength of any known fiber. Moreover, the high hydrogen (H) content of polyethylene makes the material an excellent shielding material for cosmic radiation. When such materials are incorporated into an epoxy or PE matrix a very effective shielding material is expected. Boron (B) may be added to the matrix resin or used as a coating to further increase the shielding effectiveness due to B s ability to slow thermal neutrons. These materials may also serve as micrometeorites shields due to PE s high impact energy absorption properties. It should be noted that such materials can be fabricated by existing equipment and methods. It is the objective of this work therefore to: (a) perform preliminary analysis of the radiation transport within these materials; (b) fabricate panels for mechanical property testing before and after radiation exposure. Preliminary determination on the effectiveness of the combinations of material components on both shielding and structural efficiency will be made.

Source record↗

Nanotube Activities at NASA-Johnson Space Center

Nanotube activities at NASA-Johnson Space Center include production, purification, characterization as well as applications of single wall carbon nanotubes (SWCNTs). A parametric study of the pulsed laser ablation process is recently completed to monitor the effect of production parameters including temperature, buffer gas, flow rate, pressure, and laser fluence. Enhancement of production is achieved by rastering the graphite target and by increasing the target surface temperature with a cw laser. In-situ diagnostics during production included time resolved passive emission and laser induced fluorescence from the plume. The improvement of the purity by a variety of steps in the purification process is monitored by characterization techniques including SEM, TEM, Raman, UV-VIS-NIR and TGA. A recently established NASA-JSC protocol for SWCNT characterization is undergoing revision with feedback from nanotube community. Efforts at JSC over the past five years in composites have centered on structural polymer/nanotube systems. Recent activities broadened this focus to multifunctional materials, supercapacitors, fuel cells, regenerable CO2 absorbers, electromagnetic shielding, radiation dosimetry and thermal management systems of interest for human space flight. Preliminary tests indicate improvement of performance in most of these applications because of the large Surface area as well as high electrical and thermal conductivity exhibited by SWCNTs. Comparison with existing technologies and possible future improvements in the SWCNT materials sill be presented.

Arepalli, Sivaram↗