Search NASA⌕ Search

SEARCH · Search NASA

Results for “network reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

An out-of-distribution-aware autoencoder model for reduced chemical kinetics

While detailed chemical kinetic models have been successful in representing rates of chemical reactions in continuum scale computational fluid dynamics (CFD) simulations, applying the models in simulations for engineering device conditions is computationally prohibitive. To reduce the cost, data-driven methods, e.g., autoencoders, have been used to construct reduced chemical kinetic models for CFD simulations. Despite their success, data-driven methods rely heavily on training data sets and can be unreliable when used in out-of-distribution (OOD) regions (i.e., when extrapolating outside of the training set). In this paper, we present an enhanced autoencoder model for combustion chemical kinetics with uncertainty quantification to enable the detection of model usage in OOD regions, and thereby creating an OOD-aware autoencoder model that contributes to more robust CFD simulations of reacting flows.Here, we first demonstrate the effectiveness of the method in OOD detection in two well-known datasets, MNIST and Fashion-MNIST, in comparison with the deep ensemble method, and then present the OOD-aware autoencoder for reduced chemistry model in syngas combustion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large decreases in ionospheric total electron content as a result of thermospheric composition changes during geomagnetic storms

The geomagnetic storms of April 17-21,2002 and May 29-30,2003 caused large decreases in the O/N2 column density ratio in the thermosphere. For these storms, ON2 column density decreases of greater than 50% were observed to extend to mid-to-low latitudes with the FUV sensitive Earth Camera of the Visible Imaging System (VIS) on the Polar spacecraft. Simultaneously in these same regions, the ground-based GPS network observed approximately 80% reductions in the Total Electron Content (TEC) of the ionosphere. The reduction in the Om2 column density ratio is due mainly to increases in the molecular species that have welled-up into the thermosphere from the lower levels of the atmosphere due to auroral heating. The geomagnetic-storm driven increase in molecular densities at typical ionospheric heights rapidly charge exchange with the ambient ionized atoms and subsequently dissociatively recombine with the ionospheric electrons leading to a reduction in the total charge density. The transition boundaries between high and low regions of O/N2 as well as TEC can be tracked in the images and the thermospheric winds can be determined from the motion of the boundaries. The motion of these boundaries during the development of the geomagnetic storm will be discussed.

Sigwarth, J. B.↗

The Dynamics of Thermospheric Composition and Ionospheric Total Electron Content During Geomagnetic Storms

The geomagnetic storms of April 17-21,2002 and May 29-30,2003 caused large decreases in the O/N2 column density ratio in the thermosphere. For these storms, O/N2 column density decreases of greater than 50% were observed to extend to mid-to-low latitudes with the FUV sensitive Earth Camera of the Visible Imaging System (VIS) on the Polar spacecraft. Simultaneously in these same regions, the ground-based GPS network observed approximately 80% reductions in the Total Electron Content (TEC) of the ionosphere. The reduction in the O/N2 column density ratio is due mainly to increases in the molecular species that have welled-up into the thermosphere from the lower levels of the atmosphere due to auroral heating. The geomagnetic-storm driven increase in molecular densities at typical ionospheric heights rapidly charge exchange with the ambient ionized atoms and subsequently dissociatively recombine with the ionospheric electrons leading to a reduction in the total charge density. The transition boundaries between high and low regions of O/N2 as well as TEC can be tracked in the images and the thermospheric winds may be inferred from the motion of the boundaries. The motion of these boundaries during the development of the geomagnetic storm will be discussed.

Sigwarth, John B.↗

Neural network tracking and extension of positive tracking periods

Feature detectors have been considered for the role of supplying additional information to a neural network tracker. The feature detector focuses on areas of the image with significant information. Basically, if a picture says a thousand words, the feature detectors are looking for the key phrases (keypoints). These keypoints are rotationally invariant and may be matched across frames. Application of these advanced feature detectors to the neural network tracking system at JPL has promising potential. As part of an ongoing program, an advanced feature detector was tested for augmentation of a neural network based tracker. The advance feature detector extended tracking periods in test sequences including aircraft tracking, rover tracking, and simulated Martian landing. Future directions of research are also discussed.

feature extraction↗

Sao Paulo Lightning Mapping Array (SP-LMA): Network Assessment and Analyses for Intercomparison Studies and GOES-R Proxy Activities

A 12 station Lightning Mapping Array (LMA) network was deployed during October 2011 in the vicinity of Sao Paulo, Brazil (SP-LMA) to contribute total lightning measurements to an international field campaign [CHUVA - Cloud processes of tHe main precipitation systems in Brazil: A contribUtion to cloud resolVing modeling and to the GPM (GlobAl Precipitation Measurement)]. The SP-LMA was operational from November 2011 through March 2012 during the Vale do Paraiba campaign. Sensor spacing was on the order of 15-30 km, with a network diameter on the order of 40-50km. The SP-LMA provides good 3-D lightning mapping out to 150 km from the network center, with 2-D coverage considerably farther. In addition to supporting CHUVA science/mission objectives, the SP-LMA is supporting the generation of unique proxy data for the Geostationary Lightning Mapper (GLM) and Advanced Baseline Imager (ABI), on NOAA's Geostationary Operational Environmental Satellite-R (GOES-R: scheduled for a 2015 launch). These proxy data will be used to develop and validate operational algorithms so that they will be ready to use on "day1" following the GOES-R launch. As the CHUVA Vale do Paraiba campaign opportunity was formulated, a broad community-based interest developed for a comprehensive Lightning Location System (LLS) intercomparison and assessment study, leading to the participation and/or deployment of eight other ground-based networks and the space-based Lightning Imaging Sensor (LIS). The SP-LMA data is being intercompared with lightning observations from other deployed lightning networks to advance our understanding of the capabilities/contributions of each of these networks toward GLM proxy and validation activities. This paper addresses the network assessment including noise reduction criteria, detection efficiency estimates, and statistical and climatological (both temporal and spatially) analyses for intercomparison studies and GOES-R proxy activities.

Bailey, J. C.↗

Economical Ground Data Delivery

Data delivery in the Deep Space Network (DSN) involves transmission of a small amount of constant, high-priority traffic and a large amount of bursty, low-priority data. The bursty traffic may be initially buffered and then metered back slowly as bandwidth becomes available. Today both types of data are transmitted over dedicated leased circuits. The authors investigated the potential of saving money by designing a hybrid communucations architecture that uses leased circuits for high-priority network communications and dial-up circuits for low-priority traffic. The architecture presented here may also be applied to any ground station-to-customer network within the range of a common carrier. The authors compare estimated costs for various scenerios and suggest security safeguards that should be considered.

communications↗

How Can We Harness the Power of Machine Learning With TEMPO Data?

There are many potential applications of machine learning for TEMPO data that include - Improve retrievals by reducing the effect of random instrument noise - Expand coverage by producing data in moderately cloudy conditions (see also Fasnacht et al. poster) - Help diagnose impacts of instrumental artifacts - Produce value-added products quickly by training on existing products from other sensors (land and ocean) - Speed up processing by training on products produced with full-physics algorithms (e.g., NO 2 slant column fitting may take ~1 hour/orbit but with a neural net it may take only minutes)

NO2↗

A Distributed Model Identification Algorithm for Multi-Agent Systems: Preprint

In this study, we investigate agent-based approach for system model identification with emphasis on power distribution system applications. Departing from conventional practices of relying on historical data for offline model identification, we adopt online update approach utilizing real-time data by employing the latest data points for gradient computation. This methodology offers advantages including a large reduction in the communication network's bandwidth requirements by minimizing the data exchanged at each iteration and enabling the model to adapt in real-time to disturbances. Furthermore, we extend our model identification process from linear frameworks to more complex non-linear convex models. This extension is validated through numerical studies demonstrating improved control performance for a synthetic IEEE test case.

data-driven control↗

Traffic Signal Optimization by Integrating Reinforcement Learning and Digital Twins

Machine learning (ML) methods, especially reinforcement learning (RL), have been widely considered for traffic signal optimization in intelligent transportation systems. Most of these ML methods are centralized, lacking in scalability and adaptability in large traffic networks. Further, it is challenging to train such ML models due to the lack of training platforms and/or the cost of deploying and training in a real traffic networks. This paper presents an approach for the integration of decentralized graph-based multi-agent reinforcement learning (DGMARL) with a Digital Twin (DT) to optimize traffic signals for the reduction of traffic congestion and network-wide fuel consumption related to stopping. Specifically, the DGMARL agents learn traffic state patterns and make decisions regarding traffic signal control with assistance from a Digital Twin module, which simulates and replicates the traffic behaviors of a real traffic network. The proposed approach was evaluated using PTV-Vissim [1], a microscopic traffic simulation platform. PTV-Vissim is also the simulation engine of the DT, enabling emulation and optimization of the traffic signals on the MLK Smart Corridor in Chattanooga, Tennessee. Compared to an actuated signal control baseline approach, experiment results show that Eco_PI, a developed performance measure capturing the impact of stops on fuel consumption, was reduced by 44.27% in a 24-hour and an average of 29.88% in a PM-peak-hour scenario.

Multi-Agent Reinforcement Learning, Digital Twin, ↗

Constitutive Modeling of the Cross-Linked Polymers During the Trio-Aging Mechanism: Effects of Water, Oxygen, UV

Abstract The synergized effects of diverse environmental conditions such as humidity, temperature, UV, and oxygen, are considered through a generic model by combining the concepts of network alteration, hygrothermal, and Photo-thermo oxidation Models [1–4]. Hygrothermal and Photo-oxidation are considered dual aging mechanisms which are due to the synergized effects of moisture-oxygen, and UV-oxygen, respectively at elevated temperatures. Here Trio-aging is considered as the synergized effects of Hygrothermal, and Photo-oxidation which the main environmental elements involved in polymer degradation are oxygen, water, and UV radiation where each of which has a different micro-structural impact on the polymer matrix. While oxygen imposes chain scission and cross-link formation, water, and UV radiation mainly cause chain scission. Similar to our recent models, the dual network hypothesis of Topolosky is utilized and as a result, the strain energy of the polymer matrix is written in terms of two states namely unaged and infinity. The infinity state network, itself, is decomposed into three networks, namely brittle, flexible, and dead networks. While the brittle network models the cross-link formation as sub-structural phenomena, the flexible and dead networks are utilized to represent the cross-link reduction and chain scission. The contribution of these networks in the infinity state is based on the amount of relevant environmental elements. The model is developed for a domain with plenty of oxygen and holds true for a gradual aging process that happens in super-thin samples.

Bahrololoumi, Amir↗

Model reduction for fractured porous media: a machine learning approach for identifying main flow pathways

Discrete fracture networks (DFN) are often used to model flow and transport in fractured porous media. The accurate resolution of flow and transport behavior on a large DFN involving thousands of fractures is computationally expensive. This makes uncertainty quantification studies of quantities of interest such as travel time through the network computationally intractable, since hundreds to thousands of runs of the DFN model are required to get bounds on the uncertainty of the predictions. Prior works on the subject demonstrated that the complexity of a DFN could be reduced by considering a sub-network of it (often termed a “backbone” sub-network), one whose flow and transport properties were then shown to be similar to that of the full network. The technique is tantamount to partitioning the complete set of fractures of a network into two disjoint sets, one of which is the backbone sub-network while the other its complement. It is in this context that we present a system-reduction technique for DFNs using supervised machine learning via a Random Forest Classifier that selects a backbone sub-network from the full set of fractures. The in-sample errors (in terms of precision and recall scores) of the trained classifier are found to be very accurate indicators of the out-of-sample errors, thus exhibiting that the classifier generalizes well to test data. Moreover, this system-reduction technique yields sub-networks as small as 12% of the full DFN that still recover transport characteristics of the full network such as the peak dosage and tailing behavior for late times. Most importantly, the sub-networks remain connected, and their size can be controlled by a single dimensionless parameter. Furthermore, measures of KL-divergence and KS-statistic for the breakthrough curves of the sub-networks with respect to the full network show physically realistic trends in that the measures decrease monotonically as the size of the sub-networks increase. In conclusion, the computational efficiency gained by this technique depends on the size of the sub-network, but large reductions in computational time can be expected for small sub-networks, yielding as much as 90% computational savings for sub-networks that are as small as 10-12% of the full network.

97 MATHEMATICS AND COMPUTING↗

Noise reduction in X-ray photon correlation spectroscopy with convolutional neural networks encoder–decoder models

Abstract Like other experimental techniques, X-ray photon correlation spectroscopy is subject to various kinds of noise. Random and correlated fluctuations and heterogeneities can be present in a two-time correlation function and obscure the information about the intrinsic dynamics of a sample. Simultaneously addressing the disparate origins of noise in the experimental data is challenging. We propose a computational approach for improving the signal-to-noise ratio in two-time correlation functions that is based on convolutional neural network encoder–decoder (CNN-ED) models. Such models extract features from an image via convolutional layers, project them to a low dimensional space and then reconstruct a clean image from this reduced representation via transposed convolutional layers. Not only are ED models a general tool for random noise removal, but their application to low signal-to-noise data can enhance the data’s quantitative usage since they are able to learn the functional form of the signal. We demonstrate that the CNN-ED models trained on real-world experimental data help to effectively extract equilibrium dynamics’ parameters from two-time correlation functions, containing statistical noise and dynamic heterogeneities. Strategies for optimizing the models’ performance and their applicability limits are discussed.

36 MATERIALS SCIENCE↗

Hypergravity Loading the Cultured Osteoblasts: Modeling and Experimental Analysis of Cellular Morphology and the Cytoskeleton

Bone forming cells, osteoblasts, respond to various mechanical forces, including mechanical strain and fluid-induced shear stress. This study examined whether osteoblasts detect changes in gravity as a mechanical force, as assessed by cellular morphology and dimensions of the cytoskeletal network. We used modeling to evaluate how gravity influences cell morphology given theoretical differences in densities between the surrounding medium, cytoplasm, and nucleus. A mechanical model was built based on analysis of axisymmetric shell structures (Fast4 software) to study the effects of 10 times gravity (10G) on cell height. The model indicated 0.02% decrease in overall cell height when the medium was 10% denser than the nucleus or cytoplasm, 5.9 x 10(exp-5)% decrease when the nucleus was 10% denser than the cytoplasm or medium, and 1.3 x 10(exp-5)% decrease when the cell cytoplasm was 10% denser than the nucleus or medium. To experimentally evaluate the influence of gravity, cultured primary fetal rat osteoblasts were grown to near confluence and centrifuged at 10G for 3 hours. Actin, microtubules, and nuclei were fluorescently labeled and analyzed by confocal microscopy to determine overall microtubule and actin network height. Centrifugation led to an apparent reduction in height of both the microtubule (-16%) and the actin (-20%) networks relative to stationary controls. Thus, both modeling and experiments indicate that hypergravity reduces the height of the osteoblast cell layer and their microtubule and actin networks. This combination of modeling and experimental analyses will help us to better understand the mechanical loading of osteoblasts.

Searby, N. D.↗

High Throughput Laser Processing for Enhanced Battery Performance and Manufacturing

For widespread adoption of electric vehicles, lithium-ion batteries (LiBs) need to achieve energy densities of >275 Wh/kg, cell costs less than $100/kWh, and charge to more than 80% capacity within 15 minutes. Recently, it has been shown that introducing a secondary pore network in thick battery electrodes enables higher extracted capacity without a severe reduction in charge/discharge rate performance. Secondary pore networks consisting of ordered arrays of microstructures reduce tortuosity of Li+-ion transport deep into the thick electrodes, diminishing detrimental concentration gradients within the cell. Ultrafast (femtosecond)-pulsed laser ablation is a promising method to introduce such micro pores or channels in thick battery electrodes as it allows for precise control of pattern geometries, results in minimal damage to the electrode, and can be introduced into existing roll-to-roll electrode manufacturing lines. We have explored laser patterning to create secondary pore networks in a variety of battery electrode materials for both anode and cathode applications and characterized the laser-material interaction parameters. In addition, advanced materials characterization techniques (SEM-EDS, XRD) were used to explore whether ultrafast laser ablation affects the remaining electrode materials' morphology and structure. Furthermore, we have translated lab-scale laser ablation to high-throughput roll-to-roll processing at industrially relevant scales. Finally, we worked with Argonne National Laboratory, developers of the battery cost-analysis package BatPac, to estimate the additional manufacturing costs (CapEx and OpEx) for incorporation of laser-ablation processing to current battery electrode manufacturing. We estimate that ultrafast laser processing will add only -$1kWh, which for considerable improvements in cell performance, creates a compelling case for industry adoption.

battery↗

Effects of Dead‐End Fractures on Non‐Fickian Transport in Three‐Dimensional Discrete Fracture Networks

Abstract Understanding mechanistic causes of non‐Fickian transport in fractured media is important for many hydrogeologic processes and subsurface applications. This study elucidates the effects of dead‐end fractures on non‐Fickian transport in three‐dimensional (3D) fracture networks. Although dead‐end fractures have been identified as low‐velocity regions that could delay solute transport, the direct relation between dead‐end fractures and non‐Fickian transport has been elusive. We systematically generate a large number of 3D discrete fracture networks with different fracture length distributions and fracture densities. We then identify dead‐end fractures using a novel graph‐based method. The effect of dead‐end fractures on solute residence time maximizes at the critical fracture density of the percolation threshold, leading to strong late‐time tailing. As fracture density increases beyond the percolation threshold, the network connectivity increases, and dead‐end fractures diminish. Consequently, the increase in network connectivity leads to a reduction in the degree of late‐time tailing. We also show that dead‐end fractures can inform about main transport paths, such as the mean tortuosity of particle trajectories. This study advances our mechanistic understanding of solute transport in 3D fracture networks.

58 GEOSCIENCES↗

A kriging and entropy-based approach to raingauge network design

Highlights: • A kriging and entropy theory-based approach is developed for gauge network design. • The method considers both minimum estimating error andoptimum rainfall information. • The best combination is verified to be effectiveto achieve final goals. Hydrological data, such as precipitation, is fundamental for planning, designing, developing, and managing water resource projects as well as for hydrologic research. An optimal raingauge network leads to more accurate estimates of mean or point precipitation at any site over the watershed. Some studies in the past have suggested increasing gauge network density for reducing the estimation error. However, more stations mean more cost of installation and monitoring. This study proposes an approach on the basis of kriging and entropy theory to determine an optimal network design in the city of Shanghai, China. Unlike the past studies using kriging interpolation and entropy theory for network design, the approach developed in the current study not only used the kriging method as an interpolator to determine rainfall data at ungauged locations but also incorporated the minimum kriging standard error (KSE) and maximum net information (NI) content. The approach would thus lead to an optimal network and would enable the reduction of kriging standard error of precipitation estimates throughout the watershed and achieve an optimum rainfall information. This study also proposed an NI-KSE-based criterion which is dependent on a single-objective optimization. To evaluate the final optimal gauge network, areal average rainfall was estimated and its accuracy was compared with that obtained with the existing rain gauge network.

54 ENVIRONMENTAL SCIENCES↗