Search NASA⌕ Search

SEARCH · Search NASA

Results for “nitriles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Vapor-phase grafting of functional silanes on atomic layer deposited Al 2 O 3

Fundamental studies are needed to advance our understanding of selective adsorption in aqueous environments and develop more effective sorbents and filters for water treatment. Vapor-phase grafting of functional silanes is an effective method to prepare well-defined surfaces to study selective adsorption. In this investigation, we perform vapor phase grafting of five different silane compounds on aluminum oxide (Al2O3) surfaces prepared by atomic layer deposition. These silane compounds have the general formula L3Si–C3H6–X where the ligand, L, controls the reactivity with the hydroxylated Al2O3 surface and the functional moiety, X, dictates the surface properties of the grafted layer. We study the grafting process using in situ Fourier transform infrared spectroscopy and ex situ x-ray photoelectron spectroscopy measurements, and we characterize the surfaces using scanning electron microscopy, atomic force microscopy, and water contact angle measurements. Here, we found that the structure and density of grafted aminosilanes are influenced by their chemical reactivity and steric constraints around the silicon atom as well as by the nature of the anchoring functional groups. Methyl substituted aminosilanes yielded more hydrophobic surfaces with a higher surface density at higher grafting temperatures. Thiol and nitrile terminated silanes were also studied and compared to the aminosilane terminated surfaces. Uniform monolayer coatings were observed for ethoxy-based silanes, but chlorosilanes exhibited nonuniform coatings as verified by atomic force microscopy measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Glove-based sensors for multimodal monitoring of natural sweat

Sweat sensors targeting exercise or chemically induced sweat have shown promise for noninvasive health monitoring. Natural thermoregulatory sweat is an attractive alternative as it can be accessed during routine and sedentary activity without impeding user lifestyles and potentially preserves correlations between sweat and blood biomarkers. We present simple glove-based sensors to accumulate natural sweat with minimal evaporation, capitalizing on high sweat gland densities to collect hundreds of microliters in just 30 min without active sweat stimulation. Sensing electrodes are patterned on nitrile gloves and finger cots for in situ detection of diverse biomarkers, including electrolytes and xenobiotics, and multiple gloves or cots are worn in sequence to track overarching analyte dynamics. Direct integration of sensors into gloves represents a simple and low-overhead scheme for natural sweat analysis, enabling sweat-based physiological monitoring to become practical and routine without requiring highly complex or miniaturized components for analyte collection and signal transduction.

42 ENGINEERING↗
DOE OSTI2025

Floodplain nitrifiers harbor the genetic potential for utilizing a wide range of organic nitrogen compounds

Organic compounds such as urea and cyanate can serve as nitrogen (N) sources for nitrifying microorganisms, including ammonia-oxidizing archaea (AOA) and bacteria (AOB), complete ammonia-oxidizing (comammox) bacteria, and nitrite-oxidizing bacteria (NOB). Here we investigated metagenome-assembled genomes (MAGs) for all four nitrifier guilds generated from hydrologically variable floodplain sediments of the Wind River Basin (WRB; Riverton, WY, USA) for their genetic potential to utilize organic N compounds. A vast majority of WRB nitrifier MAGs harbored urease (ure) and at least one urea transporter ( utp, urt, dur3 ). AOA were the most abundant and phylogenetically diverse nitrifiers in WRB floodplain sediments. Several AOA MAGs encoded cyanase ( cynS ), nitrilase ( nit1 ), omega-amidase ( nit2 ), nitrile hydratase ( nthA ), and genes related to purine degradation, including biuret hydrolase ( biuH ), oxamic transcarbamylase ( allFGH ), and catabolic carbamate kinase ( allK ). AOA often encoded an uncharacterized amidohydrolase collocated with biuH , rather than allophanate hydrolase ( atzF ). A small number of AOA encoded atzF , functioning in an unknown pathway. AOB and comammox were of relatively low abundance and taxonomic diversity and were present only at certain depths in WRB; however, they encoded triuret/biuret degradation genes ( trtA, biuH , and atzH ), and in comammox, these genes were also collocated with allFGHK . The genetic potential of ammonia oxidizers in the WRB floodplain suggests that organic N may support nitrification in this system. The proposed pathways for utilizing purine degradation products other than urea potentially expand the known metabolic capabilities of AOA, AOB, and comammox bacteria and reveal the possibility for cryptic N cycling between microbial community members.

floodplain↗
DOE OSTI2021

The development of novel organomanganese hydration catalysts and uranium oxo-imido complexes to provide insights into redox chemistry and bonding properties

This project is focused on the development of novel Mn complexes that will be useful as hydrolysis catalysts for substrates such as nitriles, esters, and amides. This Mn chemistry will provide a useful platform to develop the capabilities that are necessary to synthesize and manipulate air and moisture sensitive compounds while simultaneously exploring the novel chemistry associated a new class of low-valent metal hydroxide complexes. The primary research objective of the proposed Mn chemistry the synthesis of well-defined Mn hydroxide complexes that will use the nucleophilicity of the hydroxide ligand in an anhydrous environment as a catalyst for desirable organic transformations. Several metal-ligand combinations are explored and have been extended to nickel, ruthenium and iron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Bio-Based Acetonitrile Production

The purpose of this CRADA is to produce at minimum 100 g of specified (99.8 wt%) acetonitrile from the nitrilation reaction using commercially available biologically derived acetic acid. This CRADA will also investigate the separation of pullulan from fermentation broth.

09 BIOMASS FUELS↗
DOE OSTI2020

Ozone Gas: Scientific Justification and Practical Guidelines for Improvised Disinfection using Consumer-Grade Ozone Generators and Plastic Storage Boxes

Here, we describe direct measurements of ozone concentration achievable in small enclosed containers (plastic storage boxes) for use as improvised decontamination systems for small articles such as disposable PPE (N95 masks, nitrile gloves, etc.), clothing, mail and small packages, food, and other miscellaneous articles. The emphasis is on the reliable and sustained generation of ozone gas concentrations of sufficient concentration and duration to create an effective virucidal environment to achieve more than 95% to 99% viral inactivation, based upon the data already published in the peer-review literature on this topic. The suggestion that ozone be used to inactivate virus is certainly not a new idea. Our objective in this report is to make clear that the necessary levels of ozone can be improvised using simple, easy-to-use, inexpensive, and widely available supplies, and that there is every theoretical and experimental reason to believe that this approach is as highly effective in viral inactivation by ozone as are the far more expensive, complex, cumbersome, and less available equivalent ozone (and other) disinfectant systems that have themselves become unavailable during times of pandemic crisis. Using multiple types of readily available commercial ozone generators, concentration in the tested improvised enclosure is tracked over time to assess ozone charging and decay rates, and the ozone quenching effects of items placed in the box. Generator performance is compared against published ozone dosage values for virucidal and antimicrobial activity. Bubbler and box-fan-type ozone generators were found to be effective at achieving and maintaining target concentrations of 10ppm ozone or higher, whereas automotive cigarette lighter and universal serial bus type plug in “air freshener” ozone generators could not achieve the target concentrations in these experiments. Calculations and practical guidelines for assembly and effective use of an ozone box for improvised decontamination are offered. The majority of this report is directed toward the scientific justification and rationale for this approach. The end of the document summarizes the findings and offers simplified designs for the construction and use of ozone boxes as an improvised method of disinfection.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Compatibility of Elastomers with Polyoxymethylene Dimethyl Ethers and Blends with Diesel

Polyoxymethylene dimethyl ethers (PODEs) have shown promise as candidates for diesel fuel blendstocks due to their low sooting tendency, high cetane number, and diesel-comparable boiling point range. However, there is a lack of literature regarding compatibility of PODEs with common automotive elastomers, which would be a prerequisite to their adoption into the marketplace. To address this need, an exposure study and complementary solubility analysis were undertaken. A commercially available blend of PODEs with polymerization degree ranging from 3 to 6 was blended with diesel certification fuel at 0, 33, 50, 67, at 100% by mass. Elastomer coupons were exposed to the various blends for a period of 4 weeks and evaluated for volume swell. The elastomer materials included multiple fluoroelastomers (Viton and fluorosilicone) and acrylonitrile butadiene rubbers (NBR), as well as neoprene, polyurethane, epichlorohydrin (ECO), PVC-nitrile blend (OZO), ethylene propylene diene monomer (EPDM), styrene-butadiene rubber (SBR), and silicone. The exposure results indicated overall poor compatibility for PODE, with every elastomer except for fluorosilicone exhibiting greater than 30% volume swell at the 33% blend level. The general trend across the elastomers was either a consistent increase in volume swell with PODE concentration, or maximum in volume swell at an intermediate blend fraction. One notable exception is EPDM, which is not generally compatible with diesel fuel and which exhibited a reduction in volume swell with increasing PODE concentration. The same elastomers and PODE/diesel blends were evaluated using Hansen solubility parameter analysis, which predicted similar trends to the exposure study with the exception of ECO. From these results, we conclude that adoption of PODEs as a diesel fuel blendstock will require either the development of specialized elastomers, or that the blend fraction be kept to a low level to maintain compatibility with existing elastomers.

42 ENGINEERING↗
NASA NTRS1972

Fire retardant polyisocyanurate foam

Fire retardant properties of low density polymer foam are increased. Foam has pendant nitrile groups which form thermally-stable heterocyclic structures at temperature below degradation temperature of urethane linkages.

Riccitiello, S. R.↗
NASA NTRS1971

Experimental interstellar organic chemistry: Preliminary findings

In a simulation of interstellar organic chemistry in dense interstellar clouds or on grain surfaces, formaldehyde, water vapor, ammonia and ethane are deposited on a quartz cold finger and ultraviolet-irradiated in high vacuum at 77K. The HCHO photolytic pathway which produces an aldehyde radical and a superthermal hydrogen atom initiates solid phase chain reactions leading to a range of new compounds, including methanol, ethanol, acetaldehyde, acetonitrile, acetone, methyl formate, and possibly formic acid. Higher nitriles are anticipated. Genetic relations among these interstellar organic molecules (e.g., the Cannizzaro and Tischenko reactions) must exist. Some of them, rather than being synthesized from smaller molecules, may be degradation products of larger organic molecules, such as hexamethylene tetramine, which are candidate consitituents of the interstellar grains. The experiments reported here may also be relevant to cometary chemistry.

Khare, B. N.↗
NASA NTRS1971

Experiments in Jovian atmosphere.

A 1000 ml reaction vessel, fitted with a stopcock, two joints for the electrodes, and a connecting joint, was used in the investigation. The flask, which has a cold finger at the bottom, was filled with an equimolar mixture of anhydrous methane and ammonia. The electrodes were adjusted to provide a gap of about 0.8 cm between them so that the current flowing through the electrodes was about 0.5 mA and a continuous spark could be observed. The operation was continued for 20 hr. The analysis of the reaction products showed the formation of amino nitriles under the conditions of the investigation.

Chadha, M. S.↗
NASA NTRS1973

Red clouds in reducing atmospheres

A dark reddish-brown high-molecular weight polymer is produced by long wavelength ultraviolet irradiation of abundant gases in reducing planetary atmospheres. The polymer is examined by paper chromatography, mass spectrometry, and infrared, visible, and ultraviolet spectroscopy. High carbon-number straight-chain alkanes with NH2 and, probably, OH and C = O groups are identified, along with amino acids. There are chemical similarities between this polymer and organic compounds recovered from carbonaceous chondrites and precambrian sediments. The visible and near-ultraviolet transmission spectrum of the polymer shows its absorption optical depth to be redder than lambda(-2) and perhaps similar in coloration to the clouds of Jupiter, Saturn, and Titan. The nitrile content is small, and the polymer should be semitransparent in the 5 micrometer atmospheric window. Such polymers may be a common constituent of clouds in the outer solar system and on the early earth.

Khare, B. N.↗
NASA NTRS1974

Interstellar molecules - Origin by catalytic reactions on grain surfaces

To determine the compound distribution formed by surface catalysis, mixtures of CO, D2, and ND2 were heated with nickel-iron or montmorillonite clay catalysts for 49-214 hours at 250 to 300 C. Compounds identified include most of the known polyatomic interstellar molecules, as well as homologous series of acetylenes, dienes, alcohols, aldehydes, ketones, ethers, esters, nitriles, amines, etc., and cyclic compounds such as furans and pyrroles. These homologous series are uniquely characteristic of surface catalysis. A search for the heavier members of these series, predicted to occur at 1/10th to 1/1,000th the abundance of the lightest members, thus comprises a crucial test of this mechanism.

Anders, E.↗
NASA NTRS1975

Aminonitriles - Possible role in chemical evolution

The formation of HCN, ammonium cyanide, alkylnitriles, aminoacetonitrile and its C- and N-methyl homologs was demonstrated earlier in a simulated Jovian atmosphere. The polymeric material resulting in these experiments was shown to give glycine, alanine, sarcosine, aspartic acid and some imino dibasic acids on acid hydrolysis, suggesting thereby the participation of the monomeric nitriles in the formation of the polymeric product(s). Further examination of products resulting from semicorona and arc discharge through a mixture of methane and ammonia has provided evidence for the formation of alkylaminopropionitriles as a complex mixture and also some pyridyl and pyrimidyl type heterocyclic compounds. A gas chromatograph/mass spectrometer examination of the heterocyclics showed resemblance with those found in some carbonaceous chondrites. The significance of these findings in relation to chemical evolution is discussed.

Chadha, M. S.↗
NASA NTRS1975

Photosynthesis of organic compounds in the atmosphere of Jupiter

An efficient conversion of CH4 to hydrocarbons and HCN takes place when NH3 is photolysed in the presence of CH4, H2, and He using a 184.9 nm light source. The extent of NH3 decomposition after a 1 hr exposure was determined spectrophotometrically; CH4, N2, and C2 and C3 hydrocarbons were detected and analyzed by mass spectrometry. Photolysis of one molar equivalent of NH3 results in the loss of 0.84 molar equivalent of CH4, which apparently reacts with hot hydrogen atoms produced by photolysis. The 8% of the NH3 which is not converted to N2 probably is converted to organic amines and nitrile derivatives. The results indicate that NH3 photolysis is a highly probable mechanism for the conversion of methane to more complex hydrocarbons in the upper atmosphere of Jupiter, and predict the occurrence of HCN, NH2NH2, and higher hydrocarbons in the Jovian atmosphere above the NH3 clouds.

Ferris, J. P.↗
NASA NTRS1976

Abiotic origin of biopolymers

A variety of methods have been investigated in different laboratories for the polymerization of amino acids and nucleotides under abiotic conditions. They include (1) thermal polymerization; (2) direct polymerization of certain amino acid nitriles, amides, or esters; (3) polymerization using polyphosphate esters; (4) polymerization under aqueous or drying conditions at moderate temperatures using a variety of simple catalysts or condensing agents like cyanamide, dicyandiamide, or imidazole; and (5) polymerization under similar mild conditions but employing activated monomers or abiotically synthesized high-energy compounds such as adenosine 5'-triphosphate (ATP). The role and significance of these methods for the synthesis of oligopeptides and oligonucleotides under possible primitive-earth conditions is evaluated. It is concluded that the more recent approach involving chemical processes similar to those used by contemporary living organisms appears to offer a reasonable solution to the prebiotic synthesis of these biopolymers.

Oro, J.↗
NASA NTRS1977

Relative toxicity of pyrolysis products of some elastomers

Ten samples comprising seven generic types of elastomers were evaluated for relative toxicity using the USF/NASA toxicity screening test method. The nitrile rubber samples appeared to generally exhibit greater toxicity than the samples of polyisoprene, styrene butadiene, and chlorinated polyethylene rubber. Carbon monoxide was present in sufficient concentration in the blood of the test animals to be the principal cause of death in the case of polyisoprene and styrene butadiene rubber.

Hilado, C. J.↗