Search NASA⌕ Search

SEARCH · Search NASA

Results for “nonlinear characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Field-resolved space–time characterization of few-cycle structured light pulses

Accompanied by the rapid development of ultrafast laser platforms in recent decades, the spatiotemporal manipulation of ultrashort laser pulses has attracted much attention due to the potential for cutting-edge applications of structured light, including optical tweezers, optical communications, super-resolution imaging, time-resolved spectroscopy in molecules and quantum materials, and strong-field physics. Today, techniques capable of characterizing the full spatial, temporal, and polarization state properties of structured light are strongly desired. Here, we demonstrate a technique, termed 3D TIPTOE, for characterizing structured mid-infrared waveforms, which uses only a two-dimensional silicon-based image sensor as both the detector and the nonlinear medium. By combining the advantages of the sub-cycle time resolution afforded by nonlinear excitation and the spatial resolution inherent to the two-dimensional sensor, the 3D TIPTOE technique allows full characterization of structured electric fields, significantly reducing the complexity of detection compared to other techniques. The validity of the technique is established by measuring both few-cycle Bessel–Gaussian pulses and radially polarized femtosecond vector beams.

Liu, Yangyang (ORCID:0000000335205332)↗
DOE OSTI2021

Machine‐learning‐based construction of barrier functions and models for safe model predictive control

Abstract In this paper, we propose a control Lyapunov‐barrier function‐based model predictive control method utilizing a feed‐forward neural network specified control barrier function (CBF) and a recurrent neural network (RNN) predictive model to stabilize nonlinear processes with input constraints, and to guarantee that safety requirements are met for all times. The nonlinear system is first modeled using RNN techniques, and a CBF is characterized by constructing a feed‐forward neural network (FNN) model with unique structures and properties. The FNN model for the CBF is trained based on data samples collected from safe and unsafe operating regions, and the resulting FNN model is verified to demonstrate that the safety properties of the CBF are satisfied. Given sufficiently small bounded modeling errors for both the FNN and the RNN models, the proposed control system is able to guarantee closed‐loop stability while preventing the closed‐loop states from entering unsafe regions in state‐space under sample‐and‐hold control action implementation. We provide the theoretical analysis for bounded unsafe sets in state‐space, and demonstrate the effectiveness of the proposed control strategy using a nonlinear chemical process example with a bounded unsafe region.

Chen, Scarlett↗
DOE OSTI2023

Elucidating the molecular programming of a nonlinear non-ribosomal peptide synthetase responsible for fungal siderophore biosynthesis

Abstract Siderophores belonging to the ferrichrome family are essential for the viability of fungal species and play a key role for virulence of numerous pathogenic fungi. Despite their biological significance, our understanding of how these iron-chelating cyclic hexapeptides are assembled by non-ribosomal peptide synthetase (NRPS) enzymes remains poorly understood, primarily due to the nonlinearity exhibited by the domain architecture. Herein, we report the biochemical characterization of the SidC NRPS, responsible for construction of the intracellular siderophore ferricrocin. In vitro reconstitution of purified SidC reveals its ability to produce ferricrocin and its structural variant, ferrichrome. Application of intact protein mass spectrometry uncovers several non-canonical events during peptidyl siderophore biosynthesis, including inter-modular loading of amino acid substrates and an adenylation domain capable of poly-amide bond formation. This work expands the scope of NRPS programming, allows biosynthetic assignment of ferrichrome NRPSs, and sets the stage for reprogramming towards novel hydroxamate scaffolds.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Nonreciprocal Coulomb drag between quantum wires in the quasi-one-dimensional regime

Coulomb drag experiments have been an essential tool to study strongly interacting low-dimensional systems. Historically, this effect has been explained in terms of momentum transfer between electrons in the active and the passive layer. We report Coulomb drag measurements between laterally coupled GaAs/AlGaAs quantum wires in the multiple one-dimensional (1D) sub-band regime that break Onsager's reciprocity upon both layer and current direction reversal, in contrast to prior 1D Coulomb drag results. The drag signal shows nonlinear current-voltage (I-V) characteristics, which are well characterized by a third-order polynomial fit. These findings are qualitatively consistent with a rectified drag signal induced by charge fluctuations. However, the nonmonotonic temperature dependence of this drag signal suggests that strong electron-electron interactions, expected within the Tomonaga-Luttinger liquid framework, remain important and standard interaction models are insufficient to capture the qualitative nature of rectified 1D Coulomb drag.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Nonlinear models for coupling the effects of stimulated Raman scattering to inertial confinement fusion codes

Laser plasma instabilities (LPI) reduce driver-target coupling, alter implosion symmetry, and therefore can fundamentally limit fusion performance in inertial confinement fusion (ICF). Developing a predictive modeling capability for LPI effects can critically advance the success of the field. We perform vector particle-in-cell simulations of multi-speckled laser beams undergoing stimulated Raman scattering (SRS) at various densities and intensities relevant to mainly indirectly driven and a subset of parameter space for directly driven ICF systems, focusing on the regimes with intensities above the onset of electron trapping. Based on the wavenumber of the SRS daughter electron plasma wave, we identify several regions with underpinning SRS saturation physics: the electron-trapping dominated region with intermediate kλD values, the strong Landau damping region at larger kλD values, and the region where the Langmuir decay instability arises at lower kλD values. We develop a nonlinear SRS reflectivity model that features the base trapping-dominated scaling of (kλD)−4 and its modifications. Electron trapping deforms the initialized electron distribution functions, and we have developed a new δf-Gaussian-mixture algorithm for an accurate characterization of the trapped hot electron population. With this SRS hot electron description, we construct a nonlinear energy deposition model and a hot electron source model—based on a modified Manley–Rowe relation—suitable for including SRS effects as a sub-grid module in a high-fidelity ICF design code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Extremized nonlinear and linearized responses in soft metamaterials enabled by gradient-based design and grayscale digital light processing

In this study, we develop a gradient-based design approach that exploits grayscale digital light processing (DLP) 3D printing for extremizing the nonlinear and linearized response of soft metamaterials — materials that harness engineered geometric instabilities to undergo large and programmable changes in configuration. Grayscale DLP approaches modulate local mechanical properties at the pixel scale by tuning the light intensity within a single grayscale image, unlocking an exceptionally large design space. To effectively navigate this space, we develop smooth mappings between local light intensity values and global quantities of interest that characterize the behavior of soft metamaterials. Enabling these smooth mappings are robust and differentiable nonlinear finite element simulations powered by a trust region solver. A PDE-constrained optimization problem is then solved to invert these mappings and produce light intensity distributions that endow the printed part with varying stiffness and flexibility in distinctive regions. It is shown that optimizing the distribution of soft and stiff phases throughout a metamaterial structure results in markedly different buckling and self-contact configurations to drive extremized nonlinear compression and linearized vibration responses. Optimized light intensity distributions are translated to grayscale images and directly used to print soft metamaterial samples, showing remarkable agreement between the buckling and self-contact response in simulated and measured deformed configurations.

Additive manufacturing↗
DOE OSTI2022

Ghost-imaging-enhanced noninvasive spectral characterization of stochastic x-ray free-electron-laser pulses

Abstract High-intensity ultrashort X-ray free-electron laser (XFEL) pulses are revolutionizing the study of fundamental nonlinear x-ray matter interactions and coupled electronic and nuclear dynamics. To fully exploit the potential of this powerful tool for advanced x-ray spectroscopies, a noninvasive spectral characterization of incident stochastic XFEL pulses with high resolution is a key requirement. Here we present a methodology that combines high-acceptance angle-resolved photoelectron time-of-flight spectroscopy and ghost imaging to enhance the quality of spectral characterization of x-ray free-electron laser pulses. Implementation of this noninvasive high-resolution x-ray diagnostic can greatly benefit the ultrafast x-ray spectroscopy community by functioning as a transparent beamsplitter for applications such as transient absorption spectroscopy in averaging mode as well as covariance-based x-ray nonlinear spectroscopies in single-shot mode where the shot-to-shot fluctuations inherent to a self-amplified spontaneous emission (SASE) XFEL pulse are a powerful asset.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Multimodal (Non)Linear Optical Nanoimaging and Nanospectroscopy

This article highlights recent advances in linear and nonlinear spectral nanoimaging. The described developments are motivated by the need to characterize molecular and material systems noninvasively with nanometer spatial and femtosecond temporal resolution. Indeed, the ability to image and chemically characterize heterogeneous interfaces with joint nano–femto resolution is a prerequisite to advancing our fundamental understanding of processes as diverse as heterogeneous catalysis, microbial communication, and energy flow in pristine/defect-containing low-dimensional quantum materials, to name a few. We describe pioneering work and recent demonstrations of (non)linear optical nanoimaging and nanospectroscopy, with an emphasis on high spatial resolution measurements conducted under ambient laboratory conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Instrument Control Software for Spectrophotometers

SRNL has developed instrument control software for diode array spectrophotometers that can be used for real time monitoring of dynamic systems. This software has evolved through several iterations as instruments have been developed for use in processing facilities at Savannah River Site. There are several noteworthy features of the software. The wavelength calibration is checked and updated in real time against reference emission lines that are designed into the instrument light source. Nonlinearities and offsets associated with the intensity response of the instruments are characterized, and absorbance spectra are appropriately corrected. These actions are necessary for accurate calculation of an absorbance spectrum from the intensity responses of two individual diode array detectors. The corrections also result in the spectra obtained for a particular sample by two (or more) different diode array detector pairs being nearly identical. This property assures consistent measurements at multiple locations with different instruments. It also permits the use of a single analyte calibration across many instruments without modification and without loss of accuracy

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Towards Floquet Chern insulators of light

Topological photonics explores photonic systems that exhibit robustness against defects and disorder, enabled by protection from underlying topological phases. These phases are typically realized in linear optical systems and characterized by their intrinsic photonic band structures. Here we experimentally study Floquet Chern insulators in periodically driven nonlinear photonic crystals, where the topological phase is controlled by the polarization and the frequency of the driving field. Our transient sum-frequency generation measurements reveal strong hybridization of the Floquet photonic bands. The measured spectrum remains gapless under a linearly polarized drive but becomes gapped under a circularly polarized drive. Theoretical analysis confirms that the Floquet gap is topological, characterized by a non-zero Chern number—a consequence of time-reversal symmetry breaking induced by the circularly polarized driving field. Furthermore, this work offers opportunities to explore the role of classical optical nonlinearity in topological phases and their applications in nonlinear optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nonlinear dynamics of topological Dirac fermions in 2D spin-orbit coupled materials

Abstract The graphene family materials are two-dimensional staggered monolayers with a gapped energy band structure due to intrinsic spin-orbit coupling. The mass gaps in these materials can be manipulated on-demand via biasing with a static electric field, an off-resonance circularly polarized laser, or an exchange interaction field, allowing the monolayer to be driven through a multitude of topological phase transitions. We investigate the dynamics of spin-orbit coupled graphene family materials to unveil topological phase transition fingerprints embedded in the nonlinear regime and show how these signatures manifest in the nonlinear Kerr effect and in third-harmonic generation processes. We show that the resonant nonlinear spectral response of topological fermions can be traced to specific Dirac cones in these materials, enabling characterization of topological invariants in any phase by detecting the cross-polarized component of the electromagnetic field. By shedding light on the unique processes involved in harmonic generation via topological phenomena our findings open an encouraging path towards the development of novel nonlinear systems based on two-dimensional semiconductors of the graphene family.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Symmetric second-harmonic generation in sub-wavelength periodically poled thin film lithium niobate

Second-harmonic generation (SHG) extensively employs periodically poled nonlinear crystals through forward quasi-phase-matching to achieve efficient frequency conversion. As poling periods approach sub-micrometers, backward quasi-phase-matching has also been demonstrated, albeit by utilizing pulsed laser drives. The realization of symmetric second-harmonic generation, characterized by counterpropagating pumps, however, has remained elusive despite theoretical predictions. The main challenge lies in achieving strong nonlinear coupling with the poling period below half the wavelength of the second-harmonic light. The recent emergence of high-quality ferroelectric lithium niobate thin films provides an opportunity for achieving precise domain control at submicron dimensions. In this paper, we demonstrate reliable control of ferroelectric domains in a thin film lithium niobate waveguide with a poling period down to 370 nm, thereby realizing highly efficient continuous-wave pumped symmetric SHG. This demonstration not only validates the feasibility of achieving subwavelength periodic poling on waveguides but could also enable submicron ferrolectric domain structures to be leveraged in integrated photonics and nonlinear optics research.

Optics↗
DOE OSTI2025

Autonomous Nanoparticle Synthesis Guided by In Situ Multiscale Structural Characterization

Autonomous synthesis platforms promise rapid exploration of vast parameter spaces; yet, integrating in situ structural characterization in closed-loop synthesis optimization remains challenging. We demonstrate a realization of such a closed-loop platform coupled with a droplet-flow microreactor, in situ X-ray scattering methods (SAXS/WAXS), and Gaussian process optimization to synthesize citrate-reduced Au nanoparticles with targeted characteristics. The system efficiently explored ∼19,000 synthesis recipes through 365 experiments, achieving precise control over size (4–60 nm) and polydispersity (σ < 0.11) across large citrate/gold ratios, exceeding traditional synthesis boundaries (1–10). Beyond confirming classical Turkevich–Frens trends, partial-dependence analysis revealed strong nonlinear coupling among precursor, citrate, and pH effects. Combining quantitative SAXS/WAXS analysis with electron microscopy characterization, we uncovered that crystallite size (d c ) and particle size (d) follow d c = 0.18d + β, where synthesis chemistry controls the intercept β while maintaining a universal slope. This parallel-band structure enables independent tuning of crystallite domain size at fixed particle diameter through a combination of chloride, gold precursor, citrate, and pH contributions (cross-validated Spearman ρ = 0.7 ± 0.1). High-resolution electron microscopy shows multiple lattice-fringe orientations within single particles, directly confirming polycrystalline domains and the ability to tune d c at the fixed d. The platform’s validation includes indistinguishable static versus flowing measurements, stable droplet transport at 100 °C, and <5% run-to-run variation, establishing a robust framework for mapping and controlling multiscale nanoparticle structure across expansive chemical spaces. In conclusion, the developed closed-loop platform can be applied to a borad range of nanosyntheis processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Topological solitonic macromolecules

Being ubiquitous, solitons have particle-like properties, exhibiting behaviour often associated with atoms. Bound solitons emulate dynamics of molecules, though solitonic analogues of polymeric materials have not been considered yet. Here we experimentally create and model soliton polymers, which we call “polyskyrmionomers”, built of atom-like individual solitons characterized by the topological invariant representing the skyrmion number. With the help of nonlinear optical imaging and numerical modelling based on minimizing the free energy, we reveal how topological point defects bind the solitonic quasi-atoms into polyskyrmionomers, featuring linear, branched, and other macromolecule-resembling architectures, as well as allowing for encoding data by spatial distributions of the skyrmion number. Application of oscillating electric fields activates diverse modes of locomotion and internal vibrations of these self-assembled soliton structures, which depend on symmetry of the solitonic macromolecules. Our findings suggest new designs of soliton meta matter, with a potential for the use in fundamental research and technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Dynamics and transport in the boundary-driven dissipative Klein-Gordon chain

Motivated by experiments on chains of superconducting qubits, we consider the dynamics of a classical Klein-Gordon chain coupled to coherent driving and subject to dissipation solely at its boundaries. As the strength of the boundary driving is increased, this minimal classical model recovers the main features of the "dissipative phase transition" seen experimentally. Between the transmitting and non-transmitting regimes on either side of this transition (which support ballistic and diffusive energy transport respectively), we observe additional dynamical regimes of interest. These include a regime of superdiffusive energy transport at weaker driving strengths, together with a "dissipative breather crystal" regime at stronger driving strengths, which is characterized by emergent translation symmetry, ballistic energy transport, and coherent oscillations of a nonlinear normal mode. Here, we propose a non-local Lyapunov exponent as an experimentally measurable diagnostic of many-body chaos in this system, and more generally in open systems that are only coupled to an environment at their boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Information transfer as a framework for optimized phase imaging

In order to efficiently image a non-absorbing sample (a phase object), dedicated phase contrast optics are required. Typically, these optics are designed with the assumption that the sample is weakly scattering, implying a linear relation between a sample’s phase and its transmission function. In the strongly scattering, nonlinear case, the standard optics are ineffective, and the transfer functions used to characterize them are uninformative. We use the Fisher information (FI) to assess the efficiency of various phase imaging schemes and to calculate an information transfer function (ITF). We show that a generalized version of Zernike phase contrast is efficient given sufficient prior knowledge of the sample. We show that with no prior knowledge, a random sensing measurement yields a significant fraction of the available information. Finally, we introduce a generalized approach to common path interferometry that can be optimized to prioritize sensitivity to particular sample features. Each of these measurements can be performed using Fourier lenses and phase masks.

Koppell, Stewart↗
DOE OSTI2023

Interpretable inverse-designed cavity for on-chip nonlinear photon pair generation

Inverse design is a powerful tool in wave physics for compact, high-performance devices. To date, applications in photonics have mostly been limited to linear systems and it has rarely been investigated or demonstrated in the nonlinear regime. In addition, the “black box” nature of inverse design techniques has hindered the understanding of optimized inverse-designed structures. We propose an inverse design method with interpretable results to enhance the efficiency of on-chip photon generation rate through nonlinear processes by controlling the effective phase-matching conditions. We fabricate and characterize a compact, inverse-designed device using a silicon-on-insulator platform that allows a spontaneous four-wave mixing process to generate photon pairs at a rate of 1.1 MHz with a coincidence to accidental ratio of 162. Our design method accounts for fabrication constraints and can be used for scalable quantum light sources in large-scale communication and computing applications.

42 ENGINEERING↗
DOE OSTI2022

Determination of the nonlinear thermo-optic coefficient of silicon nitride and oxide using an effective index method

There is little literature characterizing the temperature-dependent thermo-optic coefficient (TOC) for low pressure chemical vapor deposition (LPCVD) silicon nitride or plasma enhanced chemical vapor deposition (PECVD) silicon dioxide at temperatures above 300 K. In this study, we characterize these material TOC’s from approximately 300-460 K, yielding values of (2.51 ± 0.08) · 10 −5 K −1 for silicon nitride and (5.67 ± 0.53) · 10 −6 K −1 for silicon oxide at room temperature (300 K). We use a simplified experimental setup and apply an analytical technique to account for thermal expansion during the extraction process. We also show that the waveguide geometry and method used to determine the resonant wavelength have a substantial impact on the precision of our results, a fact which can be used to improve the precision of numerous ring resonator index sensing experiments.

36 MATERIALS SCIENCE↗