Search NASA⌕ Search

SEARCH · Search NASA

Results for “ocean wind speeds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

The effects of the variations in sea surface temperature and atmospheric stability in the estimation of average wind speed by SEASAT-SASS

The average wind speeds from the scatterometer (SASS) on the ocean observing satellite SEASAT are found to be generally higher than the average wind speeds from ship reports. In this study, two factors, sea surface temperature and atmospheric stability, are identified which affect microwave scatter and, therefore, wave development. The problem of relating satellite observations to a fictitious quantity, such as the neutral wind, that has to be derived from in situ observations with models is examined. The study also demonstrates the dependence of SASS winds on sea surface temperature at low wind speeds, possibly due to temperature-dependent factors, such as water viscosity, which affect wave development.

Liu, W. T.↗
NASA NTRS1993

Validation of Special Sensor Microwave Imager monthly-mean wind speed from July 1987 to December 1989

Since July 1987, the Remote Sensing Systems (Santa Rosa, California) routinely computes from first principles the wind speed from Special Sensor Microwave Imager (SSM/I) measurements of the intensity of microwave radiation emitted at the ocean surface. The accuracy of monthly-mean SSM/I wind speeds is determined by comparisons with moored-buoy wind measurements, which were recorded by four different institutions at 44 sites in the Atlantic and Pacific Oceans during July 1987 to December 1989. All results for 1988 were virtually identical with 1989. The range of monthly mean moored-buoy wind speeds was 2-10 m/s. The rms difference of 697 monthly-mean matchups of the composite 1988 and 1989 data set was 1.2 m/s. The rms differences were smaller in the equatorial zone and higher in middle latitudes, in accord with the monthly standard deviation. At middle latitudes, the time series of rms differences displayed an annual cycle. In the equatorial zone, the agreement between SSM/I and in situ data was better in regions with a lesser amount of clouds, and vice versa. For SSM/I monthly standard deviations of 1-2, 2-3, and 3-4 m/s, the average absolute values of the monthly-mean difference between SSM/I and moored-buoy wind speeds were 0.6, 0.9, and 1.4 m/s, respectively.

Halpern, David↗
NASA NTRS1992

Validation of Special Sensor Microwave Imager Monthly-Mean Wind Speed From July 1987 to December 1989

Since July 1987 the Remote Sensing Systems, Santa Rosa, California, routinely computes from first principles the wind speed from Special Sensor Microwave Imager (SSM/I) measurements of the intensity of microwave radiation emitted at the ocean surface. The accuracy of monthly-mean SSM/I wind speeds is determined by comparisons with moored-buoy wind measurements, which were recorded by four different institutions at 44 sites in the Atlantic and Pacific Oceans during July 1987 to December 1989. All results for 1988 were virtually identical with 1989. The range of monthly mean moored-buoy wind speeds was 2-10 m s^(-1). During 1987, the equatorial matchups were not equivalent with 1998 and 1989, and the cause remains unknown. The root-mean-square (rms) difference of 697 monthly-mean matchups of the composite 1988 and 1989 data set was 1.2 m s^(-1). The rms differences were smaller in the equatorial zone and higher in middle latitudes, in accord with the monthly standard deviation. At middle latitudes the time series of rms differences displayed an annual cycle. In the equatorial zone the agreement between SSM/I and in situ data was better in regions with a lesser amount of clouds, and vice versa. For SSM/I monthly standard deviations of 1-2, 2-3, and 3-4 m s^(-1), the average absolute values of the monthly-mean difference between SSM/I and moored-buoy wind speeds were 0.6, 0.9, and 1.4 m s^(-1), respectively.

Halpern, D.↗
NASA NTRS2001

Combining TOPEX and SeaWinds Data to Refine Models for Ocean Surface Emissivity: Wind Vector Signatures at 18, 21 and 37 GHz

TOPEX Microwave Radiometer (TMR) brightness temperature observations at 18, 21, and 37 GHz have been collocated with near-simultaneous SeaWinds wind vector data as well as with a monthly SST climatological product. The combined data set allows us to study the dependence of ocean surface emissivity (at each frequency) upon both wind speed. Results show clear two-branch wind speed dependence; weak and linear below 6 m/s with an abrupt increase in sensitivity above that point. The analysis also shows that the zenith-directed ocean surface emissivity is polarization dependent above wind speeds of 5-6 m/s with an azimuthal variation related to the wind direction. This last result accords with recent polarimetric radiometer observations collected from aircraft. Implications of these observations to water vapor retrieval algorithms, nadir-viewing polarimetry, and ocean emission modeling will be discussed.

Vandemark, D.↗
NASA NTRS1978

Orbit analysis for Seasat-A

Seasat-A is a NASA earth satellite for measuring global ocean dynamics from space. The instruments on the spacecraft will provide data on wave height and direction, surface wind speed and direction, ice fields, ocean surface topography and atmospheric water content. This paper is concerned with the orbit analysis for Seasat-A. The first topic is the selection of the orbit which best satisfies the measurement objectives of the various instruments. The maintenance of this orbit under drag and other perturbations is also discussed. The second topic is precision orbit determination analysis which is required to achieve ocean topography objectives of the mission.

Cutting, E.↗
NASA NTRS2000

A Probabilistic Technique for Improving the Mid-Swath Wind Direction Accuracy of Scanning Pencil Beam Scatterometers

The SeaWinds on QuikSCAT scatterometer is a device developed by NASA JPL to measure the speed and direction of ocean surface winds. Simulations performed in order to determine the expected performance of the instrument prior to its launch have indicated that the accuracy of the retrieved wind vectors varies across the swath. In particular the mid-swath accuracy is worse than that of the rest of the swath. This behavior is a general characteristic of scanning pencil beam scatterometers. For SeaWinds, the accuracy of the rest of the swath, and the size of the swath are such that the instrument meets its science requirements despite mid-swath shortcomings. However, by understanding the problem at mid-swath, we can improve the performance there as well, yielding even better coverage and accuracy than was originally intended. The mid-swath performance degradation is due to suboptimal viewing geometry. In particular mid-swath measurements contains measurements from two azimuths, roughly 180 degrees apart. With the standard wind retrieval technique, mid-swath root mean square (RMS) wind direction errors are approximately 30 degrees for low wind speeds (3 - 5.5 m/s) and 20 degrees for moderate to high wind speeds (5.5 - 30 m/s). We discuss the underlying causes of this phenomenon in detail and propose a modification to the wind retrieval technique in order to improve mid-swath performance. By estimating the range of likely wind directions for each measurement cell, one can optimally apply information from neighboring cells in order to reduce random wind direction errors without significantly degrading the resolution of the resultant wind field. In this manner we are able to achieve mid-swath RMS wind direction errors as low as 15 degrees for low winds and 10 degrees for moderate to high winds, while at the same time preserving high resolution structures such as cyclones and fronts. Since our results are based on simulated data, we also outline a procedure for making use of real data to optimize the technique after launch.

Stiles, Bryan↗
DOE OSTI2023

Gulf of Mexico Risk Analysis Database (GoMRAD)

The Gulf of Mexico Risk Analysis Database is comprehensive Esri geodatabase of vector layers, raster layers, and tables curated for risk analysis within the offshore Gulf of Mexico. Datasets include bathymetry, seafloor characteristics (channels, anomalies, faults, etc.), MetOcean data (wind speed, wave height, etc.), ocean current data, sediment data, and machine learning training regions used in NETL's Ocean & Geohazard Analysis (OGA) tool. This database serves as a compliment to the OGA tool by providing many of the datasets used in the design of the OGA tool, including regions used for machine learning. This database also serves as a valuable resource for risk analysis studies within the offshore Gulf of Mexico. This work was completed under the Advanced Offshore Research Portfolio, FWP Number: 1022476.

BOEM,Bathymetry,Gulf Of Mexico,Machine Learning,Me↗
DOE OSTI2023

Physicochemical characterization and source apportionment of Arctic ice-nucleating particles observed in Ny-Ålesund in autumn 2019

Abstract. Ice-nucleating particles (INPs) initiate primary ice formation in Arctic mixed-phase clouds (MPCs), altering cloud radiative properties and modulating precipitation. For atmospheric INPs, the complexity of their spatiotemporal variations, heterogeneous sources, and evolution via intricate atmospheric interactions challenge the understanding of their impact on microphysical processes in Arctic MPCs and induce an uncertain representation in climate models. In this work, we performed a comprehensive analysis of atmospheric aerosols at the Arctic coastal site in Ny-Ålesund (Svalbard, Norway) from October to November 2019, including their ice nucleation ability, physicochemical properties, and potential sources. Overall, INP concentrations (NINP) during the observation season were approximately up to 3 orders of magnitude lower compared to the global average, with several samples showing degradation of NINP after heat treatment, implying the presence of proteinaceous INPs. Particle fluorescence was substantially associated with INP concentrations at warmer ice nucleation temperatures, indicating that in the far-reaching Arctic, aerosols of biogenic origin throughout the snow- and ice-free season may serve as important INP sources. In addition, case studies revealed the links between elevated NINP and heat lability, fluorescence, high wind speeds originating from the ocean, augmented concentration of coarse-mode particles, and abundant organics. Backward trajectory analysis demonstrated a potential connection between high-latitude dust sources and high INP concentrations, while prolonged air mass history over the ice pack was identified for most scant INP cases. The combination of the above analyses demonstrates that the abundance, physicochemical properties, and potential sources of INPs in the Arctic are highly variable despite its remote location.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1978

Seasat-A opens new phase in earth observations

The data output of the Seasat-A, the first satellite designed specifically for oceanographic observation, is described. Wave height and direction, ice distribution, surface wind speed and direction, ocean-surface temperature, and atmospheric water content will be monitored by the satellite. Imaging radar, microwave scatterometer, microwave radiometer and visual and infrared radiometer experiments are included in the Seasat-A observing program. Two types of orbits have been developed: a near-repeat cycle of three days, and a near-repeat cycle of 25 days. Both orbit types offer fine coverage (18.5 km crossing separations) of the earth. Synthetic aperture radar data on computer-compatible tapes and geophysical data records available through the Seasat-A mission are described.

Cutting, E.↗
NASA NTRS1991

Estimating SAR Doppler Shifts From Quasi-Homogeneous Targets

Linear-estimator subalgorithm optimized for local terrain. Algorithm processes some of information in synthetic-aperture-radar echoes from quasi-homogeneous targets, yielding optimal estimates of Doppler frequency shifts. Differs from one described in article, "Estimating SAR Doppler Shifts From Homogeneous Targets", NPO-17869, though offers similar advantages for measurements of wind shears and speeds of ocean currents. Derivation of algorithm involves some of same terminology and simplifying assumptions, however, target area considered quasi-homogeneous in sense it consists of patchwork of subareas, each of which is homogeneous target differing from its neighbors. This assumption more realistic than assumption of homogeneity.

Jin, Michael Y.↗
NASA NTRS1989

A frontal cyclogenesis case study from Seasat scatterometer data

In June 1978, the Seasat satellite was launched carrying, among other instruments, the Seasat-A scatterometer system (SASS), which produced ambiguous wind speed and direction data at the ocean surface. A fifteen day subset of dealiased wind vector data with the inherent ambiguities removed was produced for the period of September 6-20, 1978. On September 8, SASS began to observe a development of frontal cyclogenesis in the South Pacific off the east coast of New Zealand, in an area of few surface observations. A large mature cyclone contained weak warm and cold fronts and an occlusion with a strong horizontal wind shear. Satellite imagery shows that a strong upper-level jet streak was moving rapidly over the area of the surface frontal occlusion and as the jet passed over this area a new vortex formed. This cyclogenesis event was studied using 50-km resolution scatterometer surface wind data. High-resolution fields of wind vectors, divergence and vorticity are computed and plotted from the scatterometer data to study the structure and development of the newly formed cyclonic vortex, not otherwise possible using conventional observations.

Cunningham, Glenn F.↗
NASA NTRS1977

Mission design for SEASAT-A, an oceanographic satellite

SEASAT-A is a NASA earth satellite for measuring global ocean dynamics from space. Launch is planned for May 1978. The instruments on the spacecraft will provide data on wave height and direction, surface wind speed and direction, ice fields, ocean surface topography and weather. This paper is concerned with the mission design for SEASAT-A. A primary topic here is the selection of the orbit which best satisfies the measurement objectives of the various instruments. The maintenance of this orbit under drag and other perturbations is discussed. The design of the mission profile is outlined. Finally precision orbit determination for SEASAT-A is discussed since it is required to maximize ocean topography accuracy.

Cutting, E.↗
NASA NTRS2003

A Comparison of Latent Heat Fluxes over Global Oceans for Four Flux Products

To improve our understanding of global energy and water cycle variability, and to improve model simulations of climate variations, it is vital to have accurate latent heat fluxes (LHF) over global oceans. Monthly LHF, 10-m wind speed (U10m), 10-m specific humidity (Q10h), and sea-air humidity difference (Qs-Q10m) of GSSTF2 (version 2 Goddard Satellite-based Surface Turbulent Fluxes) over global Oceans during 1992-93 are compared with those of HOAPS (Hamburg Ocean Atmosphere Parameters and Fluxes from Satellite Data), NCEP (NCEP/NCAR reanalysis). The mean differences, standard deviations of differences, and temporal correlation of these monthly variables over global Oceans during 1992-93 between GSSTF2 and each of the three datasets are analyzed. The large-scale patterns of the 2yr-mean fields for these variables are similar among these four datasets, but significant quantitative differences are found. The temporal correlation is higher in the northern extratropics than in the south for all variables, with the contrast being especially large for da Silva as a result of more missing ship data in the south. The da Silva has extremely low temporal correlation and large differences with GSSTF2 for all variables in the southern extratropics, indicating that da Silva hardly produces a realistic variability in these variables. The NCEP has extremely low temporal correlation (0.27) and large spatial variations of differences with GSSTF2 for Qs-Q10m in the tropics, which causes the low correlation for LHF. Over the tropics, the HOAPS LHF is significantly smaller than GSSTF2 by approx. 31% (37 W/sq m), whereas the other two datasets are comparable to GSSTF2. This is because the HOAPS has systematically smaller LHF than GSSTF2 in space, while the other two datasets have very large spatial variations of large positive and negative LHF differences with GSSTF2 to cancel and to produce smaller regional-mean differences. Our analyses suggest that the GSSTF2 latent heat flux, surface air humidity, and winds are likely to be more realistic than the other three flux datasets examined, although those of GSSTF2 are still subject to regional biases.

Chou, Shu-Hsien↗
NASA NTRS2010

Improving NOAA's NWLON Through Enhanced Data Inputs from NASA's Ocean Surface Topography

This report assesses the benefit of incorporating NASA's OSTM (Ocean Surface Topography Mission) altimeter data (C- and Ku-band) into NOAA's (National Oceanic and Atmospheric Administration) NWLON (National Water Level Observation Network) DSS (Decision Support System). This data will enhance the NWLON DSS by providing additional inforrnation because not all stations collect all meteorological parameters (sea-surface height, ocean tides, wave height, and wind speed over waves). OSTM will also provide data where NWLON stations are not present. OSTM will provide data on seasurface heights for determining sea-level rise and ocean circulation. Researchers and operational users currently use satellite altimeter data products with the GSFCOO NASA data model to obtain sea-surface height and ocean circulation inforrnation. Accurate and tirnely inforrnation concerning sea-level height, tide, and ocean currents is needed to irnprove coastal tidal predictions, tsunarni and storm surge warnings, and wetland restoration.

Guest, DeNeice C.↗
NASA NTRS1993

Latent and sensible heat flux estimated from ERS-1 data

Two issues regarding surface latent and sensible heat flux are addressed: its value in low wind speed conditions over the tropical oceans,and its determination solely from satellite observations. The investigation is performed with an oceanic mixed layer model operated in an 'inverse' mode. The 'normal' model is forced with the surface heat and radiative fluxes and produces the SST evolution, whereas the 'inverse' model produces the latent sensible heat flux given the SST and surface radiative flux as input. The results indicate that at low wind speeds there exists a minimum latent sensible heat flux of about 80 to 100 W/sq m. Sensitivity studies show that the latent sensible heat flux is very sensitive to random errors in the forcing SST time series. The implications of this strong sensitivity in regards to the use of satellite measurements to supply the forcing SST are discussed.

Iacobellis, S. F.↗