Search NASA⌕ Search

SEARCH · Search NASA

Results for “one-pot method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Dual-Wavelength Simultaneous Patterning of Degradable Thermoset Supports for One-Pot Embedded 3D Printing

Vat photopolymerization (VP) techniques have enabled the fabrication of complex geometries while balancing high precision and fast processing times. 3D printed objects are traditionally built layer-by-layer with newly cured layers being structurally supported by previous ones. Fabricating unsupported features such as overhangs and arches risks misalignment and sagging, limiting the range of accessible designs. To overcome this issue, support structures are fabricated along with the primary object as temporary scaffolds that provide stability and conserve print fidelity. For VP specifically, patterning dissolvable sacrificial supports is attractive to avoid manual removal after printing. In this study, we demonstrate a base-degradable thermoset to pattern print supports in a one-pot formulation along with the primary structural material. Efficient printing is enabled using a dual-wavelength negative imaging (DWNI) DLP printer that patterns the degradable thermoset with visible light and the permanent network with UV light, which are simultaneously projected using a single digital micromirror device (DMD). Printed objects undergo thermal postprocessing to enhance the final conversion of the primary material, after which thermoset supports are degraded in a basic, aqueous solution. This approach provides a robust method for the dual-wavelength patterning of sacrificial thermoset supports, broadening the range of accessible 3D printable materials and geometries.

3D printing↗

Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1) full range solid solution: Structure, optical properties, and magnetism

Graphical abstract: The continuous modulation on crystal structure and band gap is achieved in the Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1) full range solid solution. - Highlights: • Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1) solid solution was synthesized by a hydrothermal method. • They all present a single-phase in the wolframite structure with space group P2/c. • The continuous tenability in band gap was achieved in Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1). • CoWO{sub 4} and Zn{sub 0.5}Co{sub 0.5}WO{sub 4} are antiferromagnetic and paramagnetic, respectively. - Abstract: A novel full-range solid-solution Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1) was successfully developed via a facile one-pot hydrothermal route. The phase structure and microstructure were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectra and scanning electron microscopy (SEM). The Zn{sub 1−x}Co{sub x}WO{sub 4} solid solution possesses similar wolframite crystal structure with the same space group P2/c. Diffuse reflection spectroscopy (DRS) measurements on Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1) demonstrated that the optical band gap can be continuously tuned from 3.56 eV to 2.61 eV for direct transition and 1.87 eV for indirect transition, respectively, with increasing x from 0 to 1. Magnetic susceptibility measurements reveal that CoWO{sub 4} has an antiferromagnetic transition at T{sub N} = 42 K, whereas Zn{sub 0.5}Co{sub 0.5}WO{sub 4} exhibits paramagnetic behavior. Moreover, CoWO{sub 4} and Zn{sub 0.5}Co{sub 0.5}WO{sub 4} obey the Curie–Weiss law from 200 k down to 50 K, and their effective magnetic moments were determined.

36 MATERIALS SCIENCE↗

Mechanically Robust, Ultraelastic Hierarchical Foam with Tunable Properties via 3D Printing

We present a mechanically robust, ultraelastic foam with controlled multiscale architectures and tunable mechanical/conductive performance is fabricated via 3D printing. Hierarchical porosity, including both macro- and microscaled pores, are produced by the combination of direct ink writing (DIW), acid etching, and phase inversion. The thixotropic inks in DIW are formulated by a simple one-pot process to disperse duo nanoparticles (nanoclay and silica nanoparticles) in a polyurethane suspension. The resulting lightweight foam exhibits tailorable mechanical strength, unprecedented elasticity (standing over 1000 compression cycles), and remarkable robustness (rapidly and fully recover after a load more than 20 000 times of its own weight). Surface coating of carbon nanotubes yields a conductive elastic foam that can be used as piezoresistivity sensor with high sensitivity. For the first time, this strategy achieves 3D printing of elastic foam with controlled multilevel 3D structures and mechanical/conductive properties. In conclusion, the facile ink preparation method can be utilized to fabricate foams of various materials with desirable performance via 3D printing.

36 MATERIALS SCIENCE↗

Oral administration of indole substituted dipyrido[2,3-d]pyrimidine derivative exhibits anti-tumor activity via inhibiting AKT and ERK1/2 on hepatocellular carcinoma

Highlights: • Multicomponent reaction (MCR) is a productive and economical method for the synthesis of antitumor compounds by connecting functional moieties. • A series of indole substituted dihydropyrido[2,3-d]pyrimidines were synthesized by MCR. • 4p exhibits antitumor activity both in vitro and in vivo via inhibiting AKT and ERK1/2 pathways on hepatocellular carcinoma. Development of an effective and safe anti-cancer drug is an urgent request for hepatocellular carcinoma (HCC). In this study, we synthesized a series of novel indole substituted dihydropyrido[2,3-d]pyrimidines through the multicomponent reactions to connect pyrido[2,3-d]pyrimidine and indole moities via an one-pot three-component reaction of 3-cyanoacetyl indoles 1, various aromatic aldehyde 2, and 2,6-diaminopyrimidin-4(3H)-one 3. Subsequently, we screened their cytotoxicity via CCK-8 assay in HepG2 cells, a human hepatoma cell line and chose compound 4p that showed the lowest dosage of IC50 to study the antitumor activities to HCC. Interestingly, 4p significantly induced the cell cycle arrest and apoptosis of HepG2 via targeting AKT and ERK1/2 signaling pathways in vitro. To improve the solubility of compound 4p, we hosted this compound into the substituted glucopyranose ring of (2-Hydroxypropyl)-β-cyclodextrin (HBC), a cosolvent approved by FDA with the help of ultrasonication and heating. Finally, we showed that oral administration of HBC-hosted 4p effectively inhibited tumor growth and prolonged the survival time of tumor-bearing mice in subcutaneously xenografted model. These results suggest that multicomponent reactions connecting pyrido[2,3-d]pyrimidine and indole moities is a productive and economical method for the synthesis of anticancer compound, and oral administration of HBC-hosted 4p is an effective and safe agents for treatment of HCC, whose clinical application potency warrant further studies.

60 APPLIED LIFE SCIENCES↗

Oxidative transformation of N-substituted 3-aminopyrazoles to azopyrazoles using electrogenerated bromine as a mediator

The one-pot process of anodic transformation of N-alkyl-3-aminopyrazoles into azopyrazoles under conditions of membraneless electrolysis in an aqueous solution of NaBr was studied for the first time. It was found that under these conditions the aminopyrazoles, which do not have a substituent at position 4, transform into the corresponding 4,4´-dibromoazopyrazoles. The corresponding yield was in the interval of 28—80%, depending on the structure of the products. The transformation of 4-substituted aminopyrazoles resulted in the formation of azopyrazoles in the yields lying within 62—86% when this process was implemented under conditions with the anodically generated Br{sub 2} acting as a mediator. A convenient method of anodic synthesis of azopyrazoles in an aqueous medium without the use of additives of chemical oxidants was proposed. The process is environmentally sound and is characterized by a high atom efficiency (>85%).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient separation and coprecipitation for simplified cathode recycling

Hydrometallurgical recycling of spent lithium-ion batteries is among the most promising recovery approaches. The current hydrometallurgical method for battery recycling faces challenges such as complex separation and precipitation processes, and environmental concerns from the use of caustic inorganic acid and hazardous hydrogen peroxide. Our proposed modified method, namely polyol-metallurgy, uses citric acid in ethylene glycol as dual-function green solution to overcome these obstacles. This bifunctional solution leaches valuable metal ions from cathode materials (e.g., LiCoO 2 ), and then acts as chelating agents to selectively precipitate cobalt through an esterification reaction, without the need for additional precipitation agents. The leaching efficiency of cobalt and lithium reaches 99.55% and 97.65%, respectively, and more than 96% of cobalt could be directly self-precipitated and recovered. Further, the unique characteristics of the dual-function solution also avoids impurities from Al foils and PVDF/carbon black films, enabling the simple separation process. Therefore, the process can be completed in one-pot system with efficient leaching, separation and coprecipitation, making it more efficient and feasible for operation than existing alternatives.

25 ENERGY STORAGE↗

Structural variability in Cu(I) and Ag(I) coordination polymers with a flexible dithione ligand: Synthesis, crystal structure, microbiological and theoretical studies

Two new compounds namely [Cu(SCN)(µ-L)]{sub n} (1) and ([Ag (µ{sub 2}-L)](ClO{sub 4})){sub n} (2) have been synthesized at room temperature by one-pot reactions between the 1,1-(1,4-butanediyl)bis(1,3-dihydro-3-methyl-1H-imidazole- 2-thione) (L) and appropriate copper(I) and silver(I) salts. These polymers have been characterized by single crystal X-ray diffraction, XRPD, TGA, elemental analysis, infrared spectroscopy, antibacterial activity and scanning probe microscopy studies. In the crystal structure of 1, copper atoms have a distorted trigonal planar geometry with a CuS{sub 2}N coordination environment. Each of the ligands in the structure of 1 acting as a bidentate S-bridging ligand to form a 1D chain structure. Additionally, the adjacent 1D chains are interconnected by the intermolecular C-H…S interactions to create a 2D network structure. In contrast to 1, in the cationic 3D structure of 2 each of the silver atoms exhibits an AgS{sub 4} tetrahedral geometry with 4-membered Ag{sub 2}S{sub 2} rings. In the structure of 2, the flexible ligand adopts two different conformations; gauche-anti-gauche and anti-anti-anti. The antibacterial studies of these polymers showed that polymer 2 is more potent antibacterial agent than 1. Scanning probe microscopy (SPM) study of the treated bacteria was carried out to investigate the structural changes cause by the interactions between the polymers and target bacteria. Theoretical study of polymer 1 investigated by the DFT calculations indicates that observed transitions at 266 nm and 302 nm in the UV–vis spectrum could be attributed to the π→π* and MLCT transitions, respectively. - Graphical abstract: Two new Cu(I) and Ag(I) coordination polymers have been have been synthesized by one-pot reactions. Copper complex has a 2D non-covalent structure, but silver compound is a 3D coordination compound. These compounds have effective antibacterial activity. - Highlights: • Cu(I) and Ag(I) based coordination polymers have different network structures. • Ag(I) polymer has more antibacterial activity than Cu(I) polymer. • DFT calculations of Cu(I) polymer has been investigated. • Cu(I) and Ag(I) polymers can destroy the structure of chromosomal and plasmid DNA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrocatalytic Reductive Amination of Aldehydes and Ketones with Aqueous Nitrite

The electrocatalytic utilization of oxidized nitrogen waste for C–N coupling chemistry is an exciting research area with great potential to be adopted as a sustainable method for generation of organonitrogen molecules. The most widely used C–N coupling reaction is reductive amination. In this work, we develop an alternative electrochemical reductive amination reaction that can proceed in neutral aqueous electrolyte with nitrite as the nitrogenous reactant and via an oxime intermediate. We develop a selection criterion for nitrite reduction electrocatalysts suited for oxime electrosynthesis and, in doing so, find Pd to be a highly efficient catalyst for this reaction, reaching an oxime Faradaic efficiency of 82% at −0.21 V vs the reversible hydrogen electrode. The aliphatic or aromatic structure of the carbonyl reactant impacts the efficacy of the catalyst, with aromatic substrates leading to suppressed oxime formation and detrimental reduction of the carbonyl to the alcohol. We developed a Pb/PbO electrocatalyst that selectively performs oxime reduction in the neutral aqueous electrolyte. With acetone as a model substrate, we demonstrate an efficient one-pot, two-step electrochemical reaction for the conversion of acetone to isopropyl amine with 85% yield and 50% global Faradaic efficiency.

catalysts↗

Deciphering a Reaction Network for the Switchable Production of Tetrahydroquinoline or Quinoline with MOF-Supported Pd Tandem Catalysts

A mechanistic study of heterogeneous tandem catalytic systems is crucial for understanding and improving catalyst activity and selectivity but remains challenging. Here, we demonstrate that a thorough mechanistic study of a multistep reaction can guide us to the controllable selective synthesis of phenyltetrahydroquinoline or phenylquinoline with easily accessible precursors. The one-pot production can be achieved, catalyzed by a well-defined, bifunctional metal–organic framework-supported Pd nanoparticles, with only water as the side product. Our mechanistic study identifies six transient intermediates and ten transformation steps from the operando magic angle spinning nuclear magnetic resonance study under 27.6 bar H 2 . In particular, reactive intermediate 2-phenyl-3,4-dihydroquinoline cannot be observed with conventional chromatographic techniques but is found to reach the maximal concentration of 0.11 mol L –1 under the operando condition. The most probable reaction network is further deduced based on the kinetic information of reaction species, obtained from both operando and ex situ reaction studies. This deep understanding of the complex reaction network enables the kinetic control of the conversions of key intermediate, 2-phenyl-3,4-dihydroquinoline, with the addition of a homogeneous co-catalyst, allowing the selective production of tetrahydroquinoline or quinoline on demand. Finally, the demonstrated methods in this work open up new avenues toward efficient modulation of reactions with a complex network to achieve desired selectivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of Organic Molecules Extracted from Mars Analogues and Influence of Their Mineralogy Using N-Methyl-N-(tert-butyldimethylsilyl)Trifluoroacetamide Derivatization Coupled with Gas Chromatography Mass Spectrometry in Preparation for the Sample Analysis at Mars Derivatization Experiment on the Mars Science Laboratory Mission

The search for complex organic molecules on Mars, including important biomolecules such as amino acids and carboxylic acids will require a chemical extraction and derivatization step to transform these organic compounds into species that are sufficiently volatile to be detected by gas chromatography mass spectrometry (GCMS). We have developed, a one-pot extraction and chemical derivatization protocol using N-methyl-N-(tert-butyldimethylsilyl)trifluoroacetamide (MTBSTFA) and dimethylformamide (DMF) for the Sample Analysis at Mars (SAM) experiment on the Mars Science Laboratory (MSL). The temperature and duration the derivatization reaction, pre-concentration of chemical derivatives, and gas chromatographic separation parameters have been optimized under SAM instrument design constraints. MTBSTFA/DMF extraction and derivatization at 300 C for several minutes of a variety of terrestrial Mars analogue materials facilitated the detection of amino acids and carboxylic acids in a surface soil sample collected from the Atacama Desert and a carbonate-rich stromatolite sample from Svalbard. However, the rapid reaction of MTBSTFA with water in several analogue materials that contained high abundances of hydrated minerals and the possible deactivation of derivatized compounds by iron oxides, as detected by XRD/XRF using the CheMin field unit Terra, proved to be highly problematic for the direct extraction of organics using MTBSTFA, The combination of pyrolysis and two different chemical derivatization methods employed by SAM should enable a wide range of organic compounds to be detected by GCMS if present on Mars,

Stalport, F.↗

The Influence of Mineralogy on Recovering Organic Acids from Mars Analogue Materials Using the One-Pot Derivatization Experiment on the Sample Analysis at Mars(SAM) Instrument Suite

The search for complex organic molecules on Mars, including important biomolecules such as amino acids and carboxylic acids, will require a chemical extraction and a derivatization step to transform these organic compounds into species that are sufficiently volatile to be detected by gas chromatography mass spectrometry (GCMS). We have developed a ''one-pot'' extraction and chemical derivatization protocol using N-methyl-N-(tert-butyldimethylsilyl) trifluoroacetamide (MTBSTFA) and dimethylformamide (DMF) for the Sample Analysis at Mars (SAM) experiment instrument suite on NASA's the Mars Science Laboratory (MSL) mission. The temperature and duration of the derivatization reaction, pre-concentration of chemical derivatives, and gas chromatographic separation parameters have been optimized under SAM instrument design constraints. MTBSTFA/DMF extraction and derivatization at 300 1C for several minutes of a variety of terrestrial Mars analog materials facilitated the detection of amino acids and carboxylic acids in a surface soil sample collected from the Atacama Desert and a carbonate-rich stromatolite sample from Svalbard. However, the rapid reaction of MTBSTFA with water in several analog materials that contained high abundances of hydrated minerals, and the possible deactivation of derivatized compounds by iron oxides, as detected by XRD/XRF using the CheMin field unit Terra, proved to be highly problematic for the direct extraction of organics using MTBSTFA. The combination of pyrolysis and two different wet-chemical derivatization methods employed by SAM should enable a wide range of organic compounds to be detected by GCMS if present on Mars.

MSL↗

Gallstone-Formation-Inspired Bimetallic Supra-nanostructures for Computed-Tomography-Image-Guided Radiation Therapy

Inspired by the gallstone formation mechanism, we report here a fast one-pot synthesis of high-surface-area bimetallic hierarchical supra-nanostructures. As gallstones are generated from metal cholate complexes, cholate bile acid molecules with Au/Ag metal precursors formed stable nanocomplexes aggregated with metal Au ions and preformed ~2 nm silver halide nanoparticles before reduction. When a reducing agent was added, the metal cholate nanocomplexes quickly formed noble bimetallic hierarchical supra-nanostructures. The morphology of bimetallic supra-nanostructures could be tailored by changing the feeding ratio of each metal precursor. In situ synchrotron small-angle X-ray scattering measurement with a custom-designed reaction cell showed two-step growth and attachment behavior toward hierarchical supra-nanostructures from the gallstone-formation-inspired metal cholate nanocomplexes in a 60 s reaction. Additional wide-angle X-ray scattering, X-ray absorption near-edge structure, in situ Fourier transform infrared, and high-resolution scanning transmission electron microscopy investigations subsequently revealed the mechanism for the evolution of bimetallic hierarchical supra-nanostructures. The gallstone-formation-inspired synthesis mechanism can be universally applied to other metals, for example, Pt–Ag and Pd–Ag bimetallic nanostructures. The synthesized high-surface-area bimetallic supra-nanostructures demonstrated significantly enhanced X-ray computed tomography imaging contrast and radiosensitizing effect for a potential image-guided nanomedicine application. We believe that our synthetic method inspired by gallstone formation and understanding represents an important step toward the development of hierarchical nanoparticles for various applications.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Manganese Oxide Nanoarray-Based Monolithic Catalysts: Tunable Morphology and High Efficiency for CO Oxidation

In this work, a generic one-pot hydrothermal synthesis route has been successfully designed and utilized to in situ grow uniform manganese oxide nanorods and nanowires onto the cordierite honeycomb monolithic substrates, forming a series of nanoarray-based monolithic catalysts. During the synthesis process, three types of potassium salt oxidants have been used with different reduction potentials, i.e., K 2 Cr 2 O 7 , KClO 3 , and K 2 S 2 O 8 , denoted as HM-DCM, HM-PCR, and HM-PSF, respectively. The different reduction potentials of the manganese source (Mn 2+ ) and oxidants induced the formation of manganese oxide nanoarrays with different morphology, surface area, and reactivity of carbon monoxide (CO) oxidation. K 2 Cr 2 O 7 and KClO 3 can induce sharp and long nanowires with slow growth rates due to their low reduction potentials. In comparison, the nanoarrays of HM-PSF presented shorter nanorods but displayed an efficient 90% CO oxidation conversion at 200 °C (T90) without noble-metal loading. Reducibility tests for the three monolithic catalysts by hydrogen temperature-programmed reduction revealed an activation energy order of HM-PSF > HM-DCM > HM-PCR for CO oxidation. The characterizations of oxygen temperature-programmed desorption and X-ray photoelectron spectroscopy indicated the abundant surface-adsorbed oxygen and lattice oxygen contributing to the superior reactivity of HM-PSF. Finally, the straightforward synthetic process showed a scalable, low-cost, and template-free method to fabricate manganese oxide nanoarray monolithic catalysts for exhaust treatment.

36 MATERIALS SCIENCE↗

Derivatization of Dextran for Multiply Charged Ion Formation and Electrospray Ionization Time-of-Flight Mass Spectrometric Analysis

We present the use of a simple, one-pot derivatization to allow the polysaccharide dextran to carry multiple positive charges, shifting its molecular weight distribution to a lower m/z range. We performed this derivatization because molecular weight measurements of polysaccharides by mass spectrometry are challenging because of their lack of readily ionizable groups. The absence of ionizable groups limits proton abstraction and suppresses proton adduction during the ionization process, producing mass spectra with predominantly singly charged metal adduct ions, thereby limiting the detection of large polysaccharides. To address this challenge, we derivatized dextran T1 (approximately 1 kDa) by attaching ethylenediamine, giving dextran readily ionizable, terminal amine functional groups. The attached ethylenediamine groups facilitated proton adduction during the ionization process in positive ion mode. Using the low molecular weight dextran T1, we tracked the number of ethylenediamine attachments by measuring the mass shift from underivatized to derivatized dextran T1. Using electrospray ionization time-of-flight mass spectrometry, we observed derivatized dextran chains ranging from two to nine glucose residues with between one and four attachments/charges. Our success in shifting derivatized dextran T1 toward the low m/z range suggests potential for this derivatization as a viable route for analysis of high molecular weight polysaccharides using electrospray ionization time-of-flight mass spectrometry. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Facile One-Pot Synthesis of Pd@Pt 1L Octahedra with Enhanced Activity and Durability toward Oxygen Reduction

A successful strategy for reducing the content of Pt without compromising the activity of a Pt-based catalyst is to deposit Pt as an ultrathin overlayer on the surface of another metal. In this paper, we report a facile one-pot synthesis of Pd@Pt 1L (1L: one atomic layer) core–shell octahedra using a solution-phase method. The success of this method relies on the use of metal precursors with markedly different reduction kinetics. In a typical synthesis, the ratio between the initial reduction rates of the Pd(II) and Pt(II) precursors differed by almost 100 times, favoring the formation of Pd–Pt bimetallic octahedra with a core–shell structure. The reduction of the Pt(II) precursor at a very slow rate and the use of a high temperature allowed the deposited Pt atoms to spread and cover the entire surface of Pd octahedral seeds formed in the initial stage. More importantly, we were able to scale up this synthesis using continuous-flow reactors without compromising product quality. Compared to a commercial Pt/C catalyst, the Pd@Pt 1L core–shell octahedra showed major augmentation in terms of catalytic activity and durability for the oxygen reduction reaction (ORR). After 10000 cycles of accelerated durability test, the core–shell octahedra still exhibited a mass activity of 0.45 A mg –1 Pt . We rationalized the experimental results using DFT calculations, including the mechanism of synthesis, ORR activities, and possible Pd–Pt atom swapping to enrich the outermost layer with Pd. Specifically, the as-synthesized Pd@Pt 1L octahedra tended to take a slightly mixed surface composition because the deposited Pt atoms were able to substitute into Pd upon deposition on the edges; ORR energetics were more favorable on pure Pt shells as compared to significantly mixed Pd–Pt shells, and the activation energy barriers calculated for the Pd–Pt atom swapping were too prohibitive to significantly alter the surface composition of the as-synthesized Pd@Pt 1L octahedra, helping sustain their activity for prolonged operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Search of Stronger/Cheaper Chitin Nanofibers through Electrospinning of Chitin–Cellulose Composites Using an Ionic Liquid Platform

The ability of the ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([C 2 mim][OAc]) to solubilize natural biopolymers (e.g., chitin and cellulose) without any chemical modification has been used to develop a one-pot process to prepare a spinning dope by extracting chitin from shrimp shell, codissolving microcrystalline cellulose (MCC, DP = 270), and electrospinning nanomats from shrimp shell-extract/MCC solutions. The resulting spinning dopes were prepared with optimal viscosity of 380 to 900 cP, and conductivity and surface tension of ~2.8 mS/cm and ~36 dyn/cm, respectively; however, nanofibers could only be prepared when the chitin/MCC ratios in SS-extract/ MCC solution were between 9/1 and 6/4. Compared to nanomats electrospun from shrimp shell-extract solution, 7/3 chitin/MCC composite nanomats demonstrated a 2-fold improvement in hardness and 3-fold improvement in elasticity, although further increases in MCC content resulted in lowering both parameters which nonetheless were higher than the pure chitin nanomats. We conclude this one pot process for preparing spinning dopes directly from shrimp shell-extract is a viable method to prepare chitin/MCC composites of improved strength/elasticity at lower costs.

36 MATERIALS SCIENCE↗

Simplified one-pot synthesis of [.sup.18F]SFB for radiolabeling

A non-aqueous single pot synthesis of [.sup.18F]SFB is set forth. The [.sup.18F]SFB produced with this method is then used, for example, to label a peptide or an engineered antibody fragment (diabody) targeting human epidermal growth factor receptor 2 (HER2) as representative examples of labeled compounds for use as an injectable composition to locate abnormal tissue, specifically tumors within an animal or human using a PET scan.

62 RADIOLOGY AND NUCLEAR MEDICINE↗