Search NASA⌕ Search

SEARCH · Search NASA

Results for “outer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Layer-dependent spin-resolved electronic structure of ferromagnetic triple-layered ruthenate Sr4Ru3O10

High-resolution angle- and spin-resolved photoemission spectroscopy (ARPES) of the triple-layered ruthenate Sr4Ru3O10 reveals features of the electronic structure that extend our understanding of the layered strontium ruthenates. The spectra near the Fermi energy are very different from the nonmagnetic analogues Sr2RuO4 and Sr3Ru2O7 with distinct Fermi surfaces for wide electronlike minority spin bands around the zone center and narrow holelike majority spin Fermi surface contours around the zone corners. The most dramatic results are two narrow spectral peaks ∼30 meV below the Fermi level, a spin-minority holelike band at the Brillouin zone center, and a spin-majority saddle-band van Hove singularity at the zone edge, which exhibits almost 100% spin polarization at low temperature, and a strong temperature dependent coherence-incoherence crossover attributed to Hund metal correlations. Quantitative comparison of the ARPES to spin-polarized density functional theory (DFT) calculations identify the specific antibonding and nonbonding orbital origins of the narrow bands, with a prediction of different spatial localization in the central and outer layers. This is shown to be consistent with experimental ARPES multizone matrix element intensity variations, and implicates outer-layer-specific control of the in-plane metamagnetism. The renormalization of the bands relative to the mean-field DFT, the demonstration of spin-polarized oxygen bands, and of spin-minority and spin-majority band-crossing hybridization provide a more complete picture of the magnetism which displays aspects of both delocalized and local moment behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Signatures of rotating black holes in quantum superposition

A new approach for operationally studying the effects of spacetime in quantum superpositions of semiclassical states has recently been proposed by some of the authors. This approach was applied to the case of a (2+1)-dimensional Bañados-Teitelboim-Zanelli (BTZ) black hole in a superposition of masses, where it was shown that a two-level system interacting with a quantum field residing in the spacetime exhibits resonant peaks in its response at certain values of the superposed masses. Here, we extend this analysis to a mass-superposed rotating BTZ black hole, considering the case where the two-level system corotates with the black hole in a superposition of trajectories. We find similar resonances in the detector response function at rational ratios of the superposed outer horizon radii, specifically in the case where the ratio of the inner and outer horizons is fixed. This suggests a connection with Bekenstein’s seminal conjecture concerning the discrete horizon spectra of black holes in quantum gravity, generalized to the case of rotating black holes. Here, our results further indicate that deeper insights into quantum-gravitational phenomena may be accessible via tools in relativistic quantum information and curved spacetime quantum field theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Effects of temperature inversion on densification in chemical vapor infiltration

In a classical chemical vapor infiltration (CVI) process, the competing effects of chemical kinetics and reagent gas transport lead to non–uniform depositions such that outer layers of a preform densify faster leaving the core highly porous. Currently, CVI must be performed at a sufficiently low temperature to achieve good densification quality which leads to high processing time and cost. Volumetric heating of the preform, especially through microwaves, can create temperature inversion such that the core is hotter than the outer surface and potentially, overcome the challenges associated with isothermal CVI. Direct numerical simulations (DNS) of densification under various such temperature distributions indicate that microwave heating in CVI processing can lead to better (uniform) densification of porous preforms. Here the role of key parameters describing the temperature distributions on the densification behavior is investigated. Strategic temporal control of the temperature distribution shows that processing times can be reduced by almost half while maintaining a good densification quality similar to that of low–temperature isothermal processing. Inside–out densification due to the inverted temperature profile is a key distinguishing characteristic of microwave assisted CVI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Campylobacter jejuni resistance to human milk involves the acyl carrier protein AcpP

Campylobacter jejuni is a common foodborne pathogen worldwide that is associated with high rates of morbidity and mortality among infants in low- to middle-income countries (LMICs). Human milk provides infants with an important source of nutrients and contains antimicrobial components for protection against infection. However, recent studies, including our own, have found significantly higher levels of Campylobacter in diarrheal stool samples collected from breastfed infants compared to non-breastfed infants in LMICs. We hypothesized that C. jejuni has unique strategies to resist the antimicrobial properties of human milk. Transcriptional profiling found human milk exposure induces genes associated with ribosomal function, iron acquisition, and amino acid utilization in C. jejuni strains 81–176 and 11168. However, unidentified proteinaceous components of human milk prevent bacterial growth. Evolving both C. jejuni isolates to survive in human milk resulted in mutations in genes encoding the acyl carrier protein (AcpP) and the major outer membrane porin (PorA). Introduction of the PorA/AcpP amino acid changes into the parental backgrounds followed by electron microscopy showed distinct membrane architectures, and the AcpP changes not only significantly improved growth in human milk, but also yielded cells surrounded with outer membrane vesicles. Analyses of the phospholipid and lipooligosaccharide (LOS) compositions suggest an imbalance in acyl chain distributions. For strain 11168, these changes protect both evolved and 11168ΔacpP G33R strains from bacteriophage infection and polymyxin killing. Taken together, this study provides insights into how C. jejuni may evolve to resist the bactericidal activity of human milk and flourish in the hostile environment of the gastrointestinal tract.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

New procedure for evaluation of U(3) coupling and recoupling coefficients

A simple method to calculate Wigner coupling coefficients and Racah recoupling coefficients for U(3) in two group–subgroup chains is presented. While the canonical U(3) coupling and recoupling coefficients are applicable to any system that respects U(3) symmetry, the U(3) coupling coefficients are more specific to nuclear structure studies. This new procedure precludes the use of binomial coefficients and alternating sums which were used in the 1973 formulation of Draayer and Akiyama, and in so doing provides a faster and more accurate determination of any and all required results. The resolution of the outer multiplicity is based on the null space concept of the U(3) generators proposed by Alex et al., whereas the inner multiplicity in the angular momentum subgroup chain is obtained from the dimension of the null space of the SO(3) raising operator. It is anticipated that a C++ library will ultimately be available for determining generic coupling and recoupling coefficients associated with both the canonical and the physical group–subgroup chains of U(3).

Cross-Coupling Reaction↗
DOE OSTI2026

Dataset for Top Model Decision Tree: Selecting Segmentation Models for Reliable Quantitative Analysis in Low- and Ultralow-Dose CryoEM

Motivation Multiple deep learning model architectures can be used to segment bacterial membranes in cryoEM images. However, an AI-based tool advancement is often presented with only a single segmentation model for broad use, and this single model may show inconsistent results across datasets from different users. Here, we present the Top Model Decision Tree, a model screening framework to screen for the best model to generate bacterial inner and outer membrane masks based on user priorities. We use pre-trained segmentation models from YOLOv11, YOLO26, U-Net, Detectron2 and SAM3 fine-tuned on bacterial inner and outer membranes imaged with cryoEM. Run the Framework This notebook must be opened in Google Colab. Mount Google Drive and run with a GPU-based runtime. Open the notebook and follow steps to git clone in folders and files within this repository. There will be a repeating top_model_decision_tree.ipynb (notebook clone) that will not be used. Save your .png binary mask files and .csv table outputs within your Google Drive or download before closing the notebook. The models and all analysis/training scripts are available at [GitHub: https://github.com/Lynnicia/CryoEM_membranes_top_model_decision_tree and https://github.com/Sireesiru/Semantic-Segmentation-of-bacterial-cell-envelope-using-U-Nets.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Cross-family and phage-specific gene requirements for Klebsiella infection revealed by scalable RB-TnSeq genetic screens.

Bacteriophages are being cataloged at an accelerating pace and are recognized as key players in nutrient and energy cycling across ecosystems. Yet the bacterial genetic determinants that govern phage-host specificity and infection success remain poorly understood, particularly in clinically and ecologically important genera such as Klebsiella where prior receptor characterization has been almost entirely limited to capsulated strains. Here we used a randomly barcoded, genome-wide, loss-of-function transposon mutant library (RB-TnSeq) of Klebsiella sp. M5al, a naturally acapsular, nitrogen-fixing rhizobacterium, to generate the first systematic, cross-family map of phage receptor gene dependencies in Klebsiella. Challenging the library against 25 double-stranded DNA phages spanning five families in 213 parallel assays, we identified 42 bacterial genes associated with phage infection, of which 15 had no prior association with phage infection in any bacterial system. Disruption of surface receptor biosynthesis genes conferred cross-resistance across multiple phage families, while intracellular gene disruptions had predominantly phage-specific effects. Clonal validation of eight genes confirmed LPS outer core biosynthesis genes as primary receptor determinants alongside additional host factors spanning outer membrane transport, cofactor biosynthesis, and two-component signaling. Comparative analysis across all 25 phages revealed that phage genus rather than family is the stronger predictor of host gene dependency profiles, a finding with direct implications for the functional annotation of uncharacterized phage isolates and rational phage cocktail design. Together, these findings provide a community resource for linking phage genomic diversity to functional host interaction space in this ecologically and clinically important genus.

Gittrich, Marissa R↗
DOE OSTI2025

Distribution of nickel(II) ions adsorbed at the muscovite mica (001)-water interface determined by in-situ resonant anomalous X-ray reflectivity

Mineral-water interfaces mediate adsorption, ion exchange, and secondary mineral formation that control element mobility in natural and engineered systems. Reliable prediction and control of these processes require a fundamental understanding of the interfacial structure that links adsorbed ion speciation to macroscopic sorption capacity and strength. Here, we determine atomic-scale changes in hydration and distribution of Ni(II) at the muscovite mica (001)-water interface using in situ high-resolution X-ray reflectivity (XR) and resonant anomalous X-ray reflectivity (RAXR) at 1 mM NiCl2 and pH 5.7. XR reveals reorganization of the primary hydration structure relative to that in deionized water: the water layer adsorbed in the cavity sites at a height of ~1.3 Å disappears, while distinct solution layers emerge at ~2.3, ~4.1, and ~5.6 Å above the basal oxygen plane. RAXR resolves three interfacial Ni(II) species: a dominant outer-sphere complex at 3.65 Å (~80% of the total coverage), a minor inner-sphere complex at 0.75 Å, and a low-coverage, more distant outer-sphere species at 5.63 Å. These three adsorbed Ni(II) species account for a total Ni(II) coverage of 0.54 ± 0.02 ion per unit cell area that compensates for the surface charge. These results highlight the role of interfacial hydration in controlling the speciation and stability of adsorbate cations on the negatively charged mica surface, providing quantitative insight into predicting the geochemical behavior of divalent metal cations in the aqueous environments.

Lee, Sang Soo↗
DOE OSTI2026

Design of a shipping fixture for a compact cryomodule hermetic assembly

In support of the development of a conduction-cooled 915MHz superconducting radio frequency (SRF) cryomodule, this study highlights the design of a shipping fixture for transporting the hermetic assembly 4500 km from Jefferson Lab to General Atomics in San Diego, California. The hermetic assembly consists of a 2-cell 915 MHz SRF cavity, a coaxial fundamental power coupler and warm-to-cold transition beam tubes. The two-part shipping assembly consists of an inner frame, providing direct mounting of the components, and an outer frame mounted to the ground transport vehicle. The inner frame is then connected to the outer frame by way of wire-rope isolators. Accelerometer data from ground transportation of previous projects at Jefferson Lab provides the baseline for the expected frequency and magnitude of vibrational and shock events during transit. Modal analyses were carried out in ANSYS on the inner frame assembly and critical components to identify an appropriate wire-rope isolator configuration such that peak loads are mitigated and the incurred frequencies do not correspond with the fundamental modes of the structures.

Accelerator Physics↗
DOE OSTI2024

Fatigue Testing and Characterization of Pre-hydrided Zircaloy-4 Cladding Tubes

The solubility of hydrogen in Zircaloy-4 (Zry-4) at the cladding operating temperature is near 100 wt. ppm. Above this solubility limit, excess hydrogen precipitates as δ-hydride platelets in the cladding material. Because of the effect of the thermal gradient across the cladding thickness on the migration and precipitation of hydrogen, hydride rims are often observed at the cladding outer surface; under excessive corrosion conditions hydride blisters are possible. It is well known that the fatigue of metal alloys, especially high cycle fatigue, is sensitive to the status of surface including the microstructure, roughness, and residual stress. Thus, the question considered herein, is whether excessive hydrogen pickup modifies the microstructure such that it has a degradation effect on the fatigue performance of cladding during operation. This report describes the evaluation of fatigue performance of a pre-hydrided Zry-4 cladding. A commercial Zry-4 was polished and pre-hydrided to 800 ppm and 1300 ppm H contents. The fatigue testing was conducted under strain control at 5 Hz with fully-reversed bending by using a cyclic integrated reversible bending fatigue tester (CIRFT). Six specimens with 1300 ppm and one specimen with 800 ppm were tested. Significant variation in test results were observed. While two of the 1300 ppm specimens failed with less than 1 ×10 5 cycles (at 0.32% and 0.41%), the four other samples did not fail over the strain amplitude range of 0.25% to 0.38%. Interestingly, the fracture initiation site of the failed samples was on the outside diameter (OD) surface rather than on the inside diameter (ID) surface as is typical for the as-polished cladding. This suggested a degrading effect of the hydriding process. Subsequently, three of the unfailed specimens were then further tested at ~0.43% to observe where failure initiation occurred. Significant variation was also observed in these three specimens. One specimen failed at ~9000 cycles while the two others failed at 43000 and 1.06 ×10 5 cycles. The performance here correlated to the location of failure initiation; failure initiated on the OD in the sample that failed after 9000 cycles while it initiated on the ID in the sample that failed after 43000 and 1.06 ×10 5 cycles. Flat features at the OD initiation sites suggest a brittle hydride feature on the surface of those samples was the cause of the degradation in fatigue performance, though the overall hydrogen levels in all samples was similar. A summary of all the observations is provided below: • The un-failed specimens with 1300 ppm H were cycled to failure with a higher amplitude near 0.43%. In addition, the fatigue-treated specimen tended to have a longer fatigue at the same induced amplitude. • Fractography revealed a mixed failure mode for the pre-hydrided specimen. Particularly, the specimen with fracture initiation site (FIS) located on the outer diameter surface of tube tended to have a shorter fatigue life than that of FIS on the inner diameter surface. • Etched cross section was shown to have hydride platelets aligned with tube longitudinal axis as expected, and the density of hydrides is at the similar level as in literature data. Meanwhile, a LECO procedure was applied for hydrogen concentration measurement, which showed the measured hydrogen contents are close to the nominal value. • With the polished cladding tube as baseline, O’Donnell-Lager (O-L) analysis showed that a decrease of about 50% in reduction-of-area (RA) would be needed for the O-L fitting to the fatigue data of 1300 ppm cladding. The suggestion for the next steps is provided.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

H_Burn_Key2_Dshell_CCC: Pre-shot Report

The double shell implosion platform presents an opportunity to explore the dynamics of a burning plasma within a volumetric burn framework. The double shell campaign and the ICF program at Los Alamos National Laboratory (LANL) is focused on achieving burning plasma using an indirectly driven double shell implosion at the National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory (LLNL). Double shell implosion is aimed at achieving robust ignition with lower convergence, albeit introducing more engineering and physics complexity due to the intricacies of assembling the capsule. The double shell target is comprised of an outer aluminum ablator shell and an inner high-Z (made of molybdenum or tungsten) pusher shell, separated by a cushion of low-density foam. The outer shell undergoes ablation driven by hohlraum-generated x-rays, which compress the foam to immense pressures, reaching several gigabars. This creates a pressure reservoir that propels the high-Z metal pusher, compressing and heating the deuterium-tritium (DT) liquid fuel to significant densities and temperatures, thereby igniting the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Tantalum Experiments in Fully-Reflected Water-Moderated Triangular-Pitched U(6.90)O 2 Fuel Rod Lattices (1.02 cm Pitch)

The United States (US) Department of Energy (DOE) Nuclear Energy Research Initiative funded the design and construction of the Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories (SNL). The start-up of the experiment facility and the execution of the experiments described here were funded by the DOE Nuclear Criticality Safety Program. The 7uPCX is designed to investigate critical systems with fuel for light water reactors in the enrichment range above 5 % 235 U. The 7uPCX assembly is a water moderated and — reflected array of aluminum-clad U(6.90 %)O 2 fuel rods. Other critical experiments performed in the 7uPCX assembly are documented in LEU-COMP-THERM-078, LEU-COMP-THERM-080, LEU-COMP-THERM 096, LEU- COMP-THERM-097, LEU-COMP-THERM-101, LEU-COMP-THERM-102, and LEU-COMP-THERM-111. Applied interests in neutron-absorbing elements at epithermal and intermediate neutron energy ranges at DOE’s Hanford Site and Savannah River Site were identified through DOE Office of Environmental Management (EM) workshops and needs surveys performed in conjunction with the National Nuclear Security Administration/Nuclear Criticality Safety Program. In response, a team lead by Oak Ridge National Laboratory (ORNL) performed a study evaluating the use of 7uPCX for testing the epithermal cross sections of materials at SNL. This marked the inception of the set of experiments described here. The purpose of these experiments was to measure the effects of tantalum in nearly-critical systems. The tantalum was introduced into the fuel arrays as experiment rods within a central test region. The central test region was designed to target the epithermal neutron energy range by providing a dry cylindrical cavity constructed of aluminum and lined with 0.04 in (0.1016 cm) thick cadmium sheet. The central test region has an outer diameter of 3.75 in (9.525 cm) length of 31 in (78.74 cm) and can hold 85 tantalum rods nominally 0.25 in (0.635 cm) outside diameter and 31.25 in (79.375 cm) long. The critical experiments were done using a set of triangular-pitched grid plates fabricated for these experiments. The grid plate set accommodated a fuel array of a total of 2016 fuel rod positions on a pitch of 0.4 in (1.016 cm) in a series of 21 hexagonal rings positioned around the central test region. The fuel used in these experiments was fabricated using unirradiated 6.90 % enriched UO 2 fuel pellets from fuel elements designed to be used in the internal nuclear superheater section of the Pathfinder boiling water reactor operated in South Dakota by the Northern States Power Company in the 1960s. The fuel elements were obtained from The Pennsylvania State University where they had been stored for many years. The fuel pellets in those fuel elements were removed from the original Incoloy cladding and reclad in 3003 aluminum tubes and end caps for use in the experiments reported here. The eight cases in this experiment series were performed in 2024 in the Sandia Critical Experiments (SCX) at the Sandia Pulsed Reactor Facility by varying the number of fuel rods in the critical assembly. The personnel involved in conducting these experiments included David Ames, Elijah Lutz, Beth Hanson, Patrick Ward, Jason Soares, and Augie Chapa from SNL, as well as Mathieu Dupont and B.J. Marshall from ORNL. Case 1 had no tantalum experiment rods. Case 2 had seven tantalum rods in the center of the central test region. Case 3 had 18 tantalum rods in the third hexagonal ring of the central test region. Case 4 had 19 tantalum rods in the center of the central test region. Case 5 had 30 tantalum rods in the outer most positions of the central test region. Case 6 had 37 tantalum rods in the center of the central test region. Case 7 had 61 tantalum rods in the center of the central test region. Case 8 had 85 tantalum rods filling all positions in the central test region. All eight critical experiments are judged to be acceptable as benchmark experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Field Validation of Dynamic Mechanical Torque Measurements for Geared Wind Turbines

Accurate knowledge of the mechanical loads of wind turbine gearboxes has become essential in modern, highly loaded gearbox designs, as maintaining or even improving gearbox reliability with increasing torque density demands is proving to be challenging. Unfortunately, the traditional method of measuring dynamic mechanical torque using strain gauges placed on the outer surface of a rotating shaft and transmitting the resulting signal is unsuitable for serial deployment due to technical and economic constraints. An alternative method based on fiber-optic strain sensors placed on the stationary outer surface of the gearbox ring gear has been proposed. Like shaft torsion, the radial deformation of the ring gear is proportionate to the rotor torque. Placing the sensors on a stationary component is a cost-effective alternative for serial implementation because the need for complex and expensive data transfer via wireless transmission or a slip ring is eliminated. In this paper, we present the results of an extensive field experiment conducted to evaluate the torque measurement accuracy of this novel sensing solution installed on the gearbox of a Gamesa G97 2-MW wind turbine at the National Renewable Energy Laboratory's Flatirons Campus. Torque measurements derived from fiber-optic strain sensors placed on the ring gear of the planetary stage are compared to conventional torque measurements from strain gauges placed on the main shaft. Two different torque estimation data processing methods were evaluated, with the method based on operational deflection shapes providing the most accurate results with an average normalized root mean square error below 0.7% for a load revolution distribution analysis. The effect of operating conditions on the torque estimate was also investigated, and the third planet-passing operational deflection shape was found to be the least sensitive to nontorque load-related effects. The fiber-optic strain sensors' successful operation during the complete test campaign has demonstrated a robust and accurate solution for fleet-wide enhanced gearbox remaining useful life estimation.

17 WIND ENERGY↗
DOE OSTI2026

Liquid centrifugation-based isotope separation of 7 Li, 37 Cl and D

Liquid centrifugation is an emerging method to separate isotopes. By spinning a liquid containing target isotopes (e.g., pure chemical or solution), the heavier isotope will be enriched at the outer part of a centrifuge, and the lighter ones will be enriched at the inner part of a centrifuge. The separation capability is positively correlated with rotation speed, outer radius and mass difference between isotopes to separate. This award targets to understand whether liquid centrifugation is effective in separating isotopes important for nuclear fission technologies. The results include the following three sections: 1) Effects of solute concentration on isotope separation; 2) Preliminary progress of building a low-speed countercurrent centrifuge, and 3) Analysis on possible candidates for 7 Li and 37 Cl. The award trained one research scientist, one Ph.D. student, one master student, and one undergraduate on liquid centrifugation and isotope measurements.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2026

Long-Length SiC/SiC Tube Irradiation Experiment at LWR Temperatures Inserted into HFIR

This report describes the pre-irradiation characterization and successful assembly of a High Flux Isotope Reactor (HFIR) irradiation experiment designed to assess radiation-induced lateral bowing of silicon carbide fiber–reinforced, silicon carbide matrix composite (SiC/SiC) components under a radial fast neutron flux gradient at representative light-water reactor (LWR) temperatures of approximately 300 °C. The over-arching goal of this work is to validate thermomechanical models of SiC/SiC composite fuel assembly distortion used to predict the extent of lateral bowing and dose at which bowing reaches a maximum value. Ultimately, these models are used to ensure that fuel assembly distortion does not block coolant channels, interfere with control rod/blade movements, and/or impact local reactivity. The experiment contains six cladding tube specimens that are approximately 558.5 mm long with representative pressurized water reactor (PWR) outer and inner diameters of 9.5 mm and 7.5 mm, respectively. The specimens were thoroughly characterized prior to irradiation using traditional dimensional inspection and surface profilometry so that these measurements can later be compared with similar measurements that will be made post-irradiation to determine radiation-induced deformations. Furthermore, fine engraving markers were inscribed along the outer surfaces of the specimen and mapped using analytic photography and a three-dimensional stage. This technique allowed for accurate measurements of the marker spacings, which can be compared with similar measurements that will be made post-irradiation to provide local radiation-induced strain mapping. A light curtain optical micrometer was also employed to measure the pre-irradiation bowing of each specimen. The experiment was successfully assembled and inserted into position VXF-19 for HFIR cycle 516, which began May 12, 2026. The experiment will be removed after cycle 519, which is currently scheduled to end in December 2026.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Induced Magnetic Fields in LBNF Horns and DUNE-PRISM Off-Axis Neutrinos

Deep Underground Neutrino Experiment (DUNE) is a next-generation, long-baseline neutrino oscillation experiment that will utilize an intense neutrino beam from Fermilab to measure neutrino oscillation parameters with unprecedented precision. The DUNE-PRISM near detector concept employs an off-axis measurement strategy to mitigate neutrino-nucleus interaction uncertainties; however, this approach relies critically on the accurate characterization of the neutrino flux. As statistical uncertainties are suppressed in the high-intensity Long Baseline Neutrino Facility (LBNF) beam, beamline focusing uncertainties, specifically those arising from focusing horn geometry, become an important systematic uncertainty source. This work presents Geant4 LBNF beam simulations quantifying one of the most important systematic uncertainties for off-axis fluxes: the impact of manufacturing tolerances in the LBNF horns. The focusing horns consist of coaxial inner and outer conductors. Ideally, the region inside the inner conductor is field-free, while the region between the inner and outer conductors serves as the focusing region, where the magnetic field follows a nominal $1/r$ dependence. However, inner conductor deformations such as eccentricity and ellipticity introduce asymmetry, inducing unintended magnetic fields inside the field-free region. Crucially, while the on-axis neutrino flux remains largely unaffected by these induced fields, the resulting flux fractional shifts become pronounced over a particular range of off-axis positions where the DUNE-PRISM program will perform measurements. Consequently, these inner conductor deformations can impact the precision of flux predictions, which could potentially degrade the sensitivity to oscillation parameters. Possible mitigation strategies for these effects will also be presented.

Bae, Yuri [U. Minnesota, Minneapolis (main)] (ORCI↗
DOE OSTI2026

Quality Control of Silicon Sensor Modules for Particle Detectors

The High-Luminosity Large Hadron Collider (HL-LHC) will produce a higher rate of particle collisions than the current Large Hadron Collider (LHC), requiring important upgrades to the Compact Muon Solenoid (CMS) to handle an increased amount of data. An important upgrade is the Phase-2 Outer Tracker Upgrade, which consists of 13,000 silicon sensor modules made of two parallel silicon sensors and readout electronics. These modules undergo careful quality control checks both during and after module assembly to ensure precise and reliable detector performance. This project focuses on precision testing for quality control of silicon sensor modules at Fermilab. Hands-on work includes visual inspection, current-voltage testing, module testing, and ultraviolet (UV) light exposure of modules showing abnormal current-voltage behavior. The ultraviolet exposure process improves the abnormal sensor readout data by placing the selected sensor side of the module directly under the UV light inside a controlled box. In addition to laboratory testing and ultraviolet experiments, I developed a Python-based data tool that connects to a module database and allows selected testing conditions and module information to be retrieved and displayed efficiently. These different testing procedures, experimental processes, and computational tools support the broader goal of identifying module issues and improving modules that will be used in the CMS Outer Tracker Phase-2 Upgrade.

Siddiqui, Hooriya [DuPage Coll.] (ORCID:0009000151↗
DOE OSTI2025

Discovery and Spectroscopic Confirmation of Aquarius III: A Low-mass Milky Way Satellite Galaxy

Abstract We present the discovery of Aquarius III, an ultra-faint Milky Way satellite galaxy identified in the second data release of the DECam Local Volume Exploration survey. Based on deeper follow-up imaging with DECam, we find that Aquarius III is a low-luminosity ( M V = − 2.5 − 0.5 + 0.3 ; L V = 850 − 260 + 380 L ⊙ ), extended ( r 1 / 2 = 41 − 8 + 9 pc) stellar system located in the outer halo ( D ⊙ = 85 ± 4 kpc). From medium-resolution Keck/DEIMOS spectroscopy, we identify 11 member stars and measure a mean heliocentric radial velocity of v sys = − 13.1 − 0.9 + 1.0 km s − 1 for the system and place an upper limit of σ v < 3.5 km s −1 ( σ v < 1.6 km s −1 ) on its velocity dispersion at the 95% (68%) credible level. Based on calcium-triplet metallicities of the six brightest red giant members, we find that Aquarius III is very metal-poor ([Fe/H]= − 2.61 ± 0.21) with a statistically significant metallicity spread ( σ [ Fe / H ] = 0.46 − 0.14 + 0.26 dex). We interpret this metallicity spread as strong evidence that the system is a dwarf galaxy as opposed to a star cluster. Combining our velocity measurement with Gaia proper motions, we find that Aquarius III is currently situated near its orbital pericenter in the outer halo ( r peri = 78 ± 7 kpc) and that it is plausibly on first infall onto the Milky Way. This orbital history likely precludes significant tidal disruption from the Galactic disk, notably unlike other satellites with comparably low velocity dispersion limits in the literature. Thus, if further velocity measurements confirm that its velocity dispersion is truly below σ v ≲ 2 km s −1 , Aquarius III may serve as a useful laboratory for probing galaxy formation physics in low-mass halos.

79 ASTRONOMY AND ASTROPHYSICS↗