Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter correlations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Colloid Transport in Saturated Porous Media: Elimination of Attachment Efficiency in a New Colloid Transport Model

A new colloid transport model is introduced that is conceptually simple but captures the essential features of complicated attachment and detachment behavior of colloids when conditions of secondary minimum attachment exist. This model eliminates the empirical concept of collision efficiency; the attachment rate is computed directly from colloid filtration theory. Also, a new paradigm for colloid detachment based on colloid population heterogeneity is introduced. Assuming the dispersion coefficient can be estimated from tracer behavior, this model has only two fitting parameters: (1) the fraction of colloids that attach irreversibly and (2) the rate at which reversibly attached colloids leave the surface. These two parameters were correlated to physical parameters that control colloid transport such as the depth of the secondary minimum and pore water velocity. Given this correlation, the model serves as a heuristic tool for exploring the influence of physical parameters such as surface potential and fluid velocity on colloid transport. This model can be extended to heterogeneous systems characterized by both primary and secondary minimum deposition by simply increasing the fraction of colloids that attach irreversibly.

Landkamer, Lee L.↗

Correlation Between Structural Parameters and Mechanical Properties of Al5083 Sheets Processed by ECAR

In the paper, structural parameters and mechanical properties of Al5083 alloy sheet during equal channel angular rolling (ECAR) process and their relationship are studied. In order to evaluate the effect of ECAR process, Al5083 strips were subjected to the ECAR process for 1, 2, and 3 passes through the die channel angles 110°, 120°, and 130° at two routes. The effect of the process on the microstructural evolution of samples was investigated by means of x-ray diffraction and EBSD techniques. X-ray pattern has been analyzed using Rietveld method to compute structural parameters, including microstrain, average crystallite size, and dislocation density. The results showed that the dislocation density and microstrain were increased, and crystallite size was decreased during ECAR process. It was found that the behavior of variations in mechanical properties was in accordance with the dislocation density changes. This paper revealed that the increase in the strength of ECARed samples could be attributed to reduction in high-angle grain boundaries and the increase in dislocation density. Moreover, the yield strength estimated from Taylor equation was found in accordance very well with the experimentally measured yield strength of the samples.

36 MATERIALS SCIENCE↗

Two-particle Bose-Einstein correlations and their Lévy parameters in PbPb collisions at s N N = 5.02 TeV

Two-particle Bose–Einstein momentum correlation functions are studied for charged-hadron pairs in lead-lead collisions at a center-of-mass energy per nucleon pair of s NN = 5.02 TeV . The data sample, containing 4.27 × 10 9 minimum bias events corresponding to an integrated luminosity of 0.607 nb − 1 , was collected by the CMS experiment in 2018. The experimental results are discussed in terms of a Lévy-type source distribution. The parameters of this distribution are extracted as functions of particle pair average transverse mass and collision centrality. These parameters include the Lévy index or shape parameter α , the Lévy scale parameter R , and the correlation strength parameter λ . The source shape, characterized by α , is found to be neither Cauchy nor Gaussian, implying the need for a full Lévy analysis. Similarly to what was previously found for systems characterized by Gaussian source radii, a hydrodynamical scaling is observed for the Lévy R parameter. The λ parameter is studied in terms of the core-halo model. ©2024 CERN, for the CMS Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measuring the parameters of massive black hole binary systems with pulsar timing array observations of gravitational waves

The observation of massive black hole binaries with pulsar timing arrays (PTAs) is one of the goals of gravitational-wave astronomy in the coming years. Massive (> or approx. 10{sup 8}M{sub {center_dot}}) and low-redshift (< or approx. 1.5) sources are expected to be individually resolved by upcoming PTAs, and our ability to use them as astrophysical probes will depend on the accuracy with which their parameters can be measured. In this paper we estimate the precision of such measurements using the Fisher-information-matrix formalism. For this initial study we restrict ourselves to 'monochromatic' sources, i.e. binaries whose frequency evolution is negligible during the expected {approx_equal}10 yr observation time, which represent the bulk of the observable population based on current astrophysical predictions. In this approximation, the system is described by seven parameters and we determine their expected statistical errors as a function of the number of pulsars in the array, the array sky coverage, and the signal-to-noise ratio (SNR) of the signal. At fixed SNR (regardless of the number of pulsars in the PTA), the gravitational-wave astronomy capability of a PTA is achieved with {approx_equal}20 pulsars; adding more pulsars (up to 1000) to the array reduces the source error box in the sky {Delta}{Omega} by a factor {approx_equal}5 and has negligible consequences on the statistical errors on the other parameters, because the correlations among parameters are already removed to a large extent. If one folds in the increase of coherent SNR proportional to the square root of the number of pulsars, {Delta}{Omega} improves as 1/SNR{sup 2} and the other parameters as 1/SNR. For a fiducial PTA of 100 pulsars uniformly distributed in the sky and a coherent SNR=10, we find {Delta}{Omega}{approx_equal}40 deg{sup 2}, a fractional error on the signal amplitude of {approx_equal}30% (which constrains only very poorly the chirp mass-luminosity distance combination M{sup 5/3}/D{sub L}), and the source inclination and polarization angles are recovered at the {approx_equal}0.3 rad level. The ongoing Parkes PTA is particularly sensitive to systems located in the southern hemisphere, where at SNR=10 the source position can be determined with {Delta}{Omega}{approx_equal}10 deg{sup 2}, but has poorer (by an order of magnitude) performance for sources in the northern hemisphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Correlation between sputtering parameters and composition of SmCo-based films for microelectromechanical system applications

About 3.0 {mu}m thick SmCo-based films with additives of Fe, Cu, and Zr were deposited on Si substrates. Based on a developed semiempirical theoretical model, the dependence of the film composition on the sputtering parameters was discussed. The experimental results show that the Sm concentration increases with decreasing sputtering power or increasing Ar gas pressure, which are in good agreement with the calculated results when the preferential sputtering effect is disregarded. The effect of the sputtering parameters on the film composition provides an opportunity for the same composite target to fabricate films with Sm concentration varying from 13.8 to 17.3 at. %, which is reasonable for the permanent magnetic phase transformation (Sm{sub 2}Co{sub 17}{yields}SmCo{sub 7}{yields}SmCo{sub 5}). Furthermore, the observed TbCu{sub 7}-type film shows a better crystal texture with a low remanence ratio for the hysteresis loops measured out plane to in plane of 0.08.

36 MATERIALS SCIENCE↗

Microseismicity Analysis for HFTS Pad and Correlation With Completion Parameters

Microseismic data can be used as a tool to help understand fracturing behavior during hydraulic stimulation. Recent studies have validated complex fracture growth and interaction during fracturing process and there is a need to better utilize microseismic data as a way of improving our understanding of this complexity. Moreover, significant stress variations along the laterals and various formations of interest can be better interpreted by making use of b-value distribution as a proxy measure for stress. In this study, we tie the Frequency Magnitude Distributions (FMD) from microseismic with the 3D seismic and petrophysical data to understand stress variations within the upper and middle Wolfcamp formations. We also look at how temporal microseismic FMD variance can be used as a tool to help understand fracturing behavior with time. Our results highlight the utility of microseismic FMD as a valuable hydraulic fracturing diagnostic tool post fracturing operations and as a validation for observations made during treatment including relevant treatment parameters.

Maity, Debotyam↗

Features of correlation measurements of the parameters of pulsed hyperspectral optical fields using an asymmetric interferometer

Differences in correlation measurements of the parameters of pulsed hyperspectral optical fields using symmetric and asymmetric interferometers are considered. It is shown analytically that the resulting cross-correlation function is sensitive to phase perturbations in the original wave field. The considered setup, which contains a telescopic reflective 4f system of parabolic mirrors in one arm, demonstrates that in the case of an asymmetric interferometer, the presence of aberrations leads to degradation of the reconstructed image, whereas in the case of symmetric interferometers these aberrations do not affect the result. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impact parameter dependence of color charge correlations in the proton

The impact parameter dependence of color charge correlators in the proton is obtained from the light front formalism in light cone gauge. We include NLO corrections due to the |qqqg\rangle | q q q g ⟩ Fock state via light-cone perturbation theory. Near the center of the proton, the b b -dependence of the correlations is very different from a ``transverse profile function’’. The resulting t t -dependence of exclusive J/\Psi J / Ψ photoproduction transitions from exponential to power law at |t| \approx 1 | t | ≈ 1 ~GeV ^2 2 . This prediction could be tested at upcoming DIS facilities or in nucleus-proton ultraperipheral collisions (UPCs).

Dumitru, Adrian↗

Qualification and Quantification of Porosity at the Top of the Fuel Pins in Metallic Fuels Using Image Processing

Approximately 130,000 metal fuel pins were irradiated in the Experimental Breeder Reactor II (EBR-II) during its 30 years of operation to develop and characterize existing and prospective fuels. For many of the metal fuel irradiation experiments, neutron radiography imaging was performed to characterize fuel behavior, such as fuel axial expansion. While several fuel expansion results obtained from neutron radiography imaging have been published, the analysis of neutron radiography for the purpose of describing statistical properties of porous matter formed on top of the fuel pins, also referred to as fluff in previous publications, is significantly less represented in the literature with just a single paper so far. This study aims to validate and augment results reported in previous publications using automated image processing. The paper describes the statistical properties of the porous matter in terms of nine parameters derived from radiography images and correlates those parameters with such fuel properties as composition, expansion, temperature, and burnup. The reported results are based on 1097 fuel pins of eight different fuel compositions. For three major fuel types, U-10Zr, U-8Pu-10Zr, and U-19Pu-10Zr, a clear negative correlation is found between the Pu content and five parameters describing the amount of porous matter generated. The parameters describing granularity properties, however, showed either negative correlation or nonlinear dependency from fuel composition. The parameters describing the amount showed a positive correlation with fuel axial expansion, while granularity parameters showed a negative correlation with axial expansion. The dependency on cladding temperature was found to be weak. A positive correlation is demonstrated for volume parameters and fuel burnup. In general, reported results confirm and validate findings published in previous studies using a much larger number of pins and automated processing techniques, which easily lend themselves to reproducibility, thus avoiding subjective bias.

36 MATERIALS SCIENCE↗

EVOLUTION OF SOLAR PARAMETERS SINCE 1750 BASED ON A TRUNCATED DYNAMO MODEL

We use a truncated dynamo model and observations of the sunspot number to infer cycle-to-cycle variations of several dynamo parameters. A correlation study between model parameters and solar cycle observables (period, amplitude, and rising time) is done, and our results are compared with the results of other authors. Using the strongest correlations found, we determined a series of relationships that can be used for prediction purposes. This technique indicates that solar cycle 24 will have a sunspot maximum of approximately 84 around June of 2013. In the context of the used model, most of the variability found in the solar cycle can be attributed to changes in the strength of the meridional circulation. The results also point to a common origin for the source of variation of the meridional flow and differential rotation and/or the {alpha}-effect.

79 ASTRONOMY AND ASTROPHYSICS↗

'Hidden' Parameters Describing Internal Motion Within Extended Particle Elements

Recent attempts to consider isolated particles and real constitutive wave elements as localized, extended spacetime structures (i.e., moving within time-like hypertubes or branes are developed within a causal extension of the Feynman-Gell-Mann electron model. These extended structures contain real internal motions, (i.e., internal hidden parameters) locally correlated with the 'hidden parameters' describing the local collective motions of the corresponding pilot-waves. Recent experimental evidence is briefly discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Recovering non-Maxwellian particle velocity distribution functions from collective Thomson-scattered spectra

Collective optical Thomson scattering (TS) is a diagnostic commonly used to characterize plasma parameters. These parameters are typically extracted by a fitting algorithm that minimizes the difference between a measured scattered spectrum and an analytic spectrum calculated from the velocity distribution function (VDF) of the plasma. However, most existing TS analysis algorithms assume that the VDFs are Maxwellian, and applying an algorithm that makes this assumption does not accurately extract the plasma parameters of a non-Maxwellian plasma due to the effect of non-Maxwellian deviations on the TS spectra. We present new open-source numerical tools for forward modeling analytic spectra from arbitrary VDFs and show that these tools are able to more accurately extract plasma parameters from synthetic TS spectra generated by non-Maxwellian VDFs compared to standard TS algorithms. Estimated posterior probability distributions of fits to synthetic spectra for a variety of example non-Maxwellian VDFs are used to determine uncertainties in the extracted plasma parameters and show that correlations between parameters can significantly affect the accuracy of fits in plasmas with non-Maxwellian VDFs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional quadratic modeling and quantitative evaluation of the diaphragm on a volumetric CT scan in patients with chronic obstructive pulmonary disease

Purpose: In patients with chronic obstructive pulmonary disease (COPD), diaphragm function may deteriorate due to reduced muscle fiber length. Quantitative analysis of the morphology of the diaphragm is therefore important. In the authors current study, they propose a diaphragm segmentation method for COPD patients that uses volumetric chest computed tomography (CT) data, and they provide a quantitative analysis of the diaphragmatic dimensions. Methods: Volumetric CT data were obtained from 30 COPD patients and 10 normal control patients using a 16-row multidetector CT scanner (Siemens Sensation 16) with 0.75-mm collimation. Diaphragm segmentation using 3D ray projections on the lower surface of the lungs was performed to identify the draft diaphragmatic lung surface, which was modeled using quadratic 3D surface fitting and robust regression in order to minimize the effects of segmentation error and parameterize diaphragm morphology. This result was visually evaluated by an expert thoracic radiologist. To take into consideration the shape features of the diaphragm, several quantification parameters—including the shape index on the apex (SIA) (which was computed using gradient set to 0), principal curvatures on the apex on the fitted diaphragm surface (CA), the height between the apex and the base plane (H), the diaphragm lengths along the x-, y-, and z-axes (XL, YL, ZL), quadratic-fitted diaphragm lengths on the z-axis (FZL), average curvature (C), and surface area (SA)—were measured using in-house software and compared with the pulmonary function test (PFT) results. Results: The overall accuracy of the combined segmentation method was 97.22% ± 4.44% while the visual accuracy of the models for the segmented diaphragms was 95.28% ± 2.52% (mean ± SD). The quantitative parameters, including SIA, CA, H, XL, YL, ZL, FZL, C, and SA were 0.85 ± 0.05 (mm{sup −1}), 0.01 ± 0.00 (mm{sup −1}), 17.93 ± 10.78 (mm), 129.80 ± 11.66 (mm), 163.19 ± 13.45 (mm), 71.27 ± 17.52 (mm), 61.59 ± 16.98 (mm), 0.01 ± 0.00 (mm{sup −1}), and 34 380.75 ± 6680.06 (mm{sup 2}), respectively. Several parameters were correlated with the PFT parameters. Conclusions: The authors propose an automatic method for quantitatively evaluating the morphological parameters of the diaphragm on volumetric chest CT in COPD patients. By measuring not only the conventional length and surface area but also the shape features of the diaphragm using quadratic 3D surface modeling, the proposed method is especially useful for quantifying diaphragm characteristics. Their method may be useful for assessing morphological diaphragmatic changes in COPD patients.

60 APPLIED LIFE SCIENCES↗

Stripe order in superconducting La 2-x Ba x CuO₄ (0.095≤x≤0.155)

The correlations between stripe order, superconductivity, and crystal structure in La 2-x Ba x CuO₄ single crystals have been studied by means of x-ray and neutron diffraction as well as static magnetization measurements. The derived phase diagram shows that charge stripe order (CO) coexists with bulk superconductivity in a broad range of doping around x=1/8, although the CO order parameter and correlation length fall off quickly for x≠1/8. Except for x=0.155, the onset of CO always coincides with the transition between the orthorhombic and the tetragonal or less orthorhombic low-temperature structures. The CO transition evolves from a sharp drop at low x to a more gradual transition at higher x, eventually falling below the structural phase boundary for optimum doping. With respect to the interlayer CO correlations, we find no qualitative change of the stripe stacking order as a function of doping, and in-plane and out-of-plane correlations disappear simultaneously at the transition. Similarly to the CO, the spin stripe order (SO) is also most pronounced at x=1/8. Truly static SO sets in below the CO and coincides with the first appearance of in-plane superconducting correlations at temperatures significantly above the bulk transition to superconductivity (SC). Indications that bulk SC causes a reduction of the spin or charge stripe order could not be identified. We argue that CO is the dominant order that is compatible with SC pairing but competes with SC phase coherence. Comparing our results with data from the literature, we find good agreement if all results are plotted as a function of x' instead of the nominal x, where x' represents an estimate of the actual Ba content, extracted from the doping dependence of the structural transition between the orthorhombic phase and the tetragonal high-temperature phase.

Hücker, M.↗

BARS DO DRIVE SPIRAL DENSITY WAVES

Recently, Buta et al. examined the question 'Do Bars Drive Spiral Density Waves?', an idea supported by theoretical studies and also from a preliminary observational analysis. They estimated maximum bar strengths Q{sub b} , maximum spiral strengths Q{sub s} , and maximum m = 2 arm contrasts A {sub 2s} for 23 galaxies with deep Anglo-Australian Telescope (AAT) K{sub s} -band images. These were combined with previously published Q{sub b} and Q{sub s} values for 147 galaxies from the Ohio State University Bright Spiral Galaxy Survey (OSUBSGS) sample and with the 12 galaxies from Block et al. Weak correlation between Q{sub b} and Q{sub s} was confirmed for the combined sample, whereas the AAT subset alone showed no significant correlations between Q{sub b} and Q{sub s} , nor between Q{sub b} and A {sub 2s}. A similar negative result was obtained in Durbala et al. for 46 galaxies. Based on these studies, the answer to the above question remains uncertain. Here we use a novel approach, and show that although the correlation between the maximum bar and spiral parameters is weak, these parameters do correlate when compared locally. For the OSUBSGS sample, a statistically significant correlation is found between the local spiral amplitude, and the forcing due to the bar's potential at the same distance, out to {approx}1.6 bar radii (the typical bar perturbation is then of the order of a few percent). Also for the sample of 23 AAT galaxies of Buta et al., we find a significant correlation between local parameters out to {approx}1.4 bar radii. Our new results confirm that, at least in a statistical sense, bars do indeed drive spiral density waves.

79 ASTRONOMY AND ASTROPHYSICS↗

A Principle Component Analysis of Galaxy Properties from a Large, Gas-Selected Sample

Disney et al. (2008) have found a striking correlation among global parameters of H i -selected galaxies and concluded that this is in conflict with the CDM model. Considering the importance of the issue, we reinvestigate the problem using the principal component analysis on a fivefold larger sample and additional near-infrared data. We use databases from the Arecibo Legacy Fast Arecibo L -band Feed Array Survey for the gas properties, the Sloan Digital Sky Survey for the optical properties, and the Two Micron All Sky Survey for the near-infrared properties. We confirm that the parameters are indeed correlated where a single physical parameter can explain 83% of the variations. When color ( g - i ) is included, the first component still dominates but it develops a second principal component. In addition, the near-infrared color ( i - J ) shows an obvious second principal component that might provide evidence of the complex old star formation. Based on our data, we suggest that it is premature to pronounce the failure of the CDM model and it motivates more theoretical work.

Chang, Yu-Yen↗