Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Rate expressions and kinetic parameters for metal ferrites in relation to applications of fossil fuel conversion to hydrogen: Part 1 of 2

Here, the goal of the present work was to provide the necessary reaction emulation information to enable detailed process simulation of a chemical looping H 2 production system from fossil fuels using CaFe 2 O 4 . This specifically pertained to the necessary kinetic data, reaction model development, and model rate parameters required for reaction emulation in both reducing and oxidizing environments. A logical methodology was defined, which included discretization of the reaction network, establishing a core model for reaction emulation that could be adapted based on the system phenomena, and development of a rate parameter regression tool designed around the core model. An extensive array of data sets was acquired by which parametric regressions were performed. The work presented and tabulated a comprehensive set of rate parameters for the reduction and oxidation reactions of CaFe 2 O 4 and descendent phases of Ca 2 Fe 2 O 5 , FeO, Fe 3 O 4 , Fe, and CaO to emulate reaction behavior in a looping-based process environment. This included direct reduction using CH 4 , H 2 , and CO, and direct oxidation reactions with steam, CO 2 and O 2 . Dynamic equilibrium was quantified for reactions that could utilize H 2 O and CO 2 as soft oxidants to re-saturate lattice oxygen in the depleted structure/phases. The kinetics associated with the oxidative mechanisms with the soft oxidants were quantified and compared to those of the reducing counterparts. The analysis provided critical insight to emulate reactions for a process that seeks to use natural gas (NG) or other fossil fuels as a direct reductant for the end goal of H 2 production.

calcium ferrite oxygen carriers↗

Structural distortions in the spin-gap regime of the quantum antiferromagnet SrCu{sub 2}(BO{sub 3}){sub 2}

We report the first crystallographic study within the low-temperature (<40 K) spin-gap region of the two-dimensional frustrated antiferromagnet SrCu{sub 2}(BO{sub 3}){sub 2}. The crystal system does not deviate from the tetragonal I-42m space group symmetry. However, our high-resolution neutron powder diffraction measurements uncover subtle structural modifications below 34 K, concomitant to the formation of the dimer singlet ground state. Intimate spin-lattice coupling leads to negative thermal expansion of the tetragonal structure, which reflects into particular local lattice adjustments. The extracted structural parameters suggest the reduction of the buckling found in the copper-borate planes and the strengthening of the leading, in-plane intra-dimer superexchange interaction. The observed contraction along the c-axis, associated with the inter-dimer exchange in adjacent layers, indicates the involvement of weaker three-dimensional interactions in the magnetic properties. The rules posed by the crystal symmetry do not preclude Dzyaloshinsky-Moriya interactions, which therefore remain as an important source of spin anisotropy necessary to rationalise the ground state behaviour. - Abstract: We report the first crystallographic study within the low-temperature spin-gap region of the two-dimensional frustrated antiferromagnet SrCu{sub 2}(BO{sub 3}){sub 2}. Subtle spin-lattice coupling was unveiled in the low-temperature region. Display Omitted

36 MATERIALS SCIENCE↗

Influence of Sn on Martensitic Beta Ti Alloys

The influence of Sn composition in Ti-17 at.% Nb alloys is studied by cyclic tension and in-situ synchrotron X-ray diffraction. It is essentially found that Sn stabilizes β-phase and effectively suppresses the formation of ω-phase. Along with β-phase stability, we detect lowering of the austenite and martensite transformation temperature by ~ 100 K/at.% and 88 K/at.%, respectively. Increasing Sn decreases the martensitic transformation strain in Ti-Nb alloys by ~ 1.4%/at.%, larger than that in Ti-Zr-Nb-Sn systems. The influence of Sn in martensitic Ti is anisotropic: causing larger reduction in lattice parameter b and higher decreases in elastic moduli of grain families that are aligned close to the b -axis. Lastly, a {013} α'' , {031} α'' ,{122} α'' and {211} α'' quadruple texture was observed in martensitic Ti wire. At the early stage of deformation, detwinning quickly rotated {013} α'' and (211} α'' , towards {031} α'' and {122} α'' components. After that, the strength of {031} α'' continued to increase, while the strength of {122} α'' texture was gradually decreased by dislocation slip as deformation continued.

36 MATERIALS SCIENCE↗

Life-cycle energy use and greenhouse gas emissions of palm fatty acid distillate derived renewable diesel

This study aims to quantify life-cycle fossil energy use and greenhouse gas (GHG) emissions for palm fatty acid distillate (PFAD) derived renewable diesel (RD) taking into consideration different feedstock classifications that are applicable to PFAD (residue, byproduct, or coproduct), and incorporating updated data for key processes. Under the three classifications, the PFAD to RD pathway was modeled using the Greenhouse gases, Regulated Emissions, and Energy Use in Technologies (GREET®) model. PFAD-derived RD could reduce fossil energy consumption by 77%–88%, relative to petroleum diesel. GHG emissions are very sensitive to PFAD classification and coproduct handling methods. Considering the production of palm oil and PFAD and economic value, we maintain that PFAD should be treated as a byproduct in palm oil refineries. With this treatment, PFAD-derived RD could achieve 84% GHG emissions reductions, compared to the emissions of petroleum diesel. We also employed a substitution method to address the substitution of PFAD by other materials in the marketplace. Compared to coproduct allocation results, we found substituting PFAD by tallow, soy oil, barley, and canola oil results in lower GHG emissions. Due to high induced land-use change emissions associated with palm farming, if PFAD is treated as a coproduct with refined palm oil, PFAD-derived RD may not deliver GHG reductions. A sensitivity analysis identified key parameters such as palm fruit yield, oil extraction efficiency in oil mills, and energy use intensity for RD production affects LCA results significantly; future efforts to improve these parameters could result in further GHG reductions.

09 BIOMASS FUELS↗

Decoding Proton-Coupled Electron Transfer with Potential–p K a Diagrams: Applications to Catalysis

The applied potential at which [Ni II (P 2 Ph N 2 Bn ) 2 ] 2+ (P 2 Ph N 2 Bn = 1,5-dibenzyl-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane) catalyzes hydrogen production is reported to vary as a function of proton source p K a in acetonitrile. Yet, most molecular catalysts exhibit catalytic onsets at p K a -independent potentials. Using experimentally determined thermochemical parameters associated with reduction and protonation, a coupled Pourbaix diagram is constructed for [Ni II (P 2 Ph N 2 Bn ) 2 ] 2+ . One layer describes proton-coupled electron transfer reactivity involving ligand-based protonation, and the second describes metal-based protonation. An overlay of this diagram with experimentally determined E cat/2 values spanning 15 p K a units, along with complementary stopped-flow rapid mixing experiments to detect reaction intermediates, supports a mechanism in which the proton-coupled electron transfer processes underpinning the p K a -dependent catalytic processes involve protonation of the ligand, not the metal center. For proton sources with p K a values in the range 6–10.6, the initial species formed is the doubly reduced, doubly protonated species [Ni 0 (P 2 Ph N 2 Bn H) 2 ] 2+ , despite a higher overpotential for this proton-coupled electron transfer reaction in comparison to forming the metal-protonated isomer. In this complex, each ligand is protonated in the exo position with the two amine moieties on each ligand binding a single proton and positioning it away from the metal center. This species undergoes very slow isomerization to form an endo-protonated hydride species [HNi II (P 2 Ph N 2 Bn )(P 2 Ph N 2 Bn H)] 2+ that can release hydrogen to close the catalytic cycle. Crucially, this slow isomerization does not perturb the initially established proton-coupled electron transfer equilibrium, placing catalysis under thermodynamic control. New details revealed about the reaction mechanism from the coupled Pourbaix diagram and the complementary stopped-flow studies lead to predictions as to how this p K a -dependent activity might be engendered in other molecular catalysts for multi-electron, multi-proton transformations.

08 HYDROGEN↗

Predictive Inverse Model for Advective Heat Transfer in a Short–Circuited Fracture: Dimensional Analysis, Machine Learning, and Field Demonstration

Identifying fluid flow maldistribution in planar geometries is a well–established problem in subsurface science/engineering. Of particular importance to the thermal performance of enhanced (or “engineered”) geothermal systems is identifying the existence of nonuniform (i.e., heterogeneous) permeability and subsequently predicting advective heat transfer. Here, machine learning via a genetic algorithm (GA) identifies the spatial distribution of an unknown permeability field in a two–dimensional Hele–Shaw geometry (i.e., parallel plates). The inverse problem is solved by minimizing the L2 norm between simulated residence time distribution (RTD) and measurements of an inert tracer breakthrough curve (BTC) (C–Dot nanoparticle). Principal component analysis (PCA) of spatially correlated permeability fields enabled reduction of the parameter space by more than a factor of 10 and restricted the inverse search to reservoir–scale permeability variations. Thermal experiments and tracer tests conducted at the mesoscale Altona Field Laboratory (AFL) demonstrate that the method accurately predicts the effects of extreme flow channeling on heat transfer in a single bedding–plane rock fracture. However, this is only true when the permeability distributions provide adequate matches to both tracer RTD and frictional pressure loss. Without good agreement to frictional pressure loss, it is still possible to match a simulated RTD to measurements, but subsequent predictions of heat transfer are grossly inaccurate. Here, the results of this study suggest that it is possible to anticipate the thermal effects of flow maldistribution, but only if both simulated RTDs and frictional pressure loss between fluid inlets and outlets are in good agreement with measurements.

42 ENGINEERING↗

Radon Monitoring and Early Low Background Counting at the Sanford Underground Laboratory

Radon detectors have been deployed underground at the Sanford Underground Laboratory at the site of the former Homestake Mine in Lead, SD. Currently, no radon mitigation measures are in place in the underground environment, and the continuing evolution of the facility ventilation systems has led to significant variations in early airborne radon concentrations. The average radon concentration measured near the primary ventilation intake for the 4850-ft level (Yates shaft) is 391 Bq/m{sup 3}, based on approximately 146 days of data. The corresponding average radon concentration near the other main ventilation intake for the 4850-ft level (Ross shaft) is 440 Bq/m{sup 3} based on approximately 350 days of data. Measurements have also been collected near the 1250-ft level Ross shaft, with average radon concentrations at 180 Bq/m{sup 3}. Secondary factors that may increase the baseline radon level underground include the presence of iron oxide and moisture, which are known to enhance radon emanation. The results of the current radon monitoring program will be used for the planning of future measurements and any potential optimization of ventilation parameters for the reduction of radon in relevant areas underground.

54 ENVIRONMENTAL SCIENCES↗

X-ray diffraction and Raman scattering study of Cr-doped ZnFe{sub 2}O{sub 4} spinel ferrites

XRD and Raman scattering measurements were made on polycrystalline ZnFe{sub 2-x}Cr{sub x}O{sub 4} (x=0.0, 0.1, 0.2) spinel ferrites as prepared by solid-state reaction route. Rietveld refined X-ray diffraction pattern confirmed the formation of single-phase and are indexed in cubic structure with Fd3m space group. Slight reduction in the lattice parameter from 8.435 to 8.410 Ǻ, with Cr{sup 3+} ion substitution has been observed. From Raman scattering spectra, the modes of ZnFe{sub 1.9}Cr{sub 0.1}O{sub 4} and ZnFe{sub 1.8}Cr{sub 0.2}O{sub 4} are shifted towards the lower frequency side as compared to ZnFe{sub 2}O{sub 4}, this red shift is attributed to higher atomic mass of Zn (65.39 amu) as compared to Fe (55.84 amu)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of gamma irradiation on chitosan and its application as a plant growth promoter in Chinese kale (Brassica alboglabra)

This research project was conducted to study the effects of irradiation on chitosan and its potential application as a plant growth promoter. Chitosan in the form of flakes was irradiated with gamma rays at irradiation dosage of 50 kGy, 100 kGy, 200 kGy and 400 kGy. The effect of irradiation on chitosan in terms of intrinsic viscosity and average molecular weight was measured using Ubbelohde capillary viscometry technique and the results obtained showed irradiation at doses of up to 50 kGy had caused an extremely significant reduction of both parameters and this trend continued at higher irradiation doses, although the decrease were not significant. The effect of various concentrations of chitosan and irradiated chitosan on growth promotion of Chinese kale (Brassica alboglabra) was hydroponically grown and cultivated for 50 days. Statistical analysis showed addition of 10 ppm of irradiated chitosan of 200 kGy and 400 kGy, respectively, resulted in an extremely significant increase in the percentage weight gain of Chinese kale (Brassica alboglabra). Results obtained in this study showed the potential use of irradiated chitosan as a plant growth promoter for plants grown hydroponically.

60 APPLIED LIFE SCIENCES↗

Investigations on structural, vibrational and dielectric properties of nanosized Cu doped Mg-Zn ferrites

Transition metal Cu{sup 2+} doped Mg-Zn ferrite [Mg{sub 0.5}Zn{sub 0.5-x}Cu{sub x}Fe{sub 2}O{sub 4} (0.0 ≤ x ≤ 0.5)] were prepared by sol gel auto combustion (SGAC) method to probe the structural, vibrational and electrical properties. X-ray diffraction (XRD) pattern reveals a single-phase cubic spinel structure without the presence of any secondary phase corresponding to other structure. The average particle size of the parent Mg{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} is found to be ~29.8 nm and is found to increase with Cu{sup 2+} doping. Progressive reduction in lattice parameter of Mg{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} has been observed due to difference in ionic radii of cations with improved Cu doping. Spinel cubic structure is further confirmed by Raman spectroscopy. Small shift in Raman modes towards higher wave number has been observed in doped Mg-Zn ferrites. The permittivity and dielectric loss decreases at lower doping and increases at higher order doping of Cu{sup 2+}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bi aliovalent substitution in Li 7 La 3 Zr 2 O 12 garnets: Structural and ionic conductivity effects

We report on the synthesis of cubic-phase garnet-type solid-state electrolytes based on Bi-doped Li 7 La 3 Zr 2 O 12 (LLZO). Bi aliovalent substitution of Zr in LLZO utilizing the Pechini processing method is employed to synthesize Li 7-x La 3 Zr 2-x Bi x O 12 compounds. A strong dependence of the ionic conductivity on Bi content is observed, and under our synthesis and sintering conditions, a >100-fold increase over the un-doped sample is observed for x=0.75. Cubic-phase Li 6 La 3 Zr 1 BiO 12 compounds are generated upon annealing in air in the temperature range 650 °C-900 °C. In contrast, in the absence of Bi, the cubic garnet phase of Li 7 La 3 Zr 2 O 12 is not formed below 700 °C and a transformation to the tetragonal phase is observed at similar to 900 °C for this un-doped compound. The role of Bi in lowering the formation temperature of the garnet cubic phase and in the ionic conductivity improvements is investigated in this work. We ascribe the effect of Bi-doping on ionic conductivity increments to changes in Li + -site occupancy and lattice parameters and the reduction in the formation temperature for the cubic-phase formation to rate enhancements of the solid-state reaction. To identify the site occupancy of Bi in the garnet structure, we employ synchrotron extended x-ray absorption fine structure spectroscopy. Our results indicate that Bi additions occupy the Zr-type sites exclusively, to within the accuracy of the measurements.

36 MATERIALS SCIENCE↗

Effects of 63 MeV proton irradiation on the performance of MWIR InGaAs/InAsSb nBn photodetectors

An investigation into the effects of 63 MeV proton irradiation on high-sensitivity mid-wave infrared InGaAs/InAsSb nBn devices is performed. Three different structures with various absorber region doping profiles are irradiated and characterized to assess their impact on performance degradation. Minority carrier lifetime is measured using time-resolved photoluminescence and lifetime damage factors are assessed. The majority carrier concentration is determined via capacitance–voltage measurements and dopant introduction rates are calculated. An analysis of dark current density is performed using these material parameters, revealing a reduction in mobility with proton fluence and the emergence of a proton-induced trap energy level. Quantum efficiency is calculated at each proton fluence, and quantum efficiency damage factors show that the graded doping structure exhibits the least reduction of quantum efficiency with dose, attributed to its effective mobility enhancement. Conclusively, detector sensitivity, assessed via shot-noise limited noise-equivalent irradiance, shows that the graded doping structure is the least susceptible to high energy proton irradiation-induced performance degradation.

Physics↗

Infrared studies of gas phase and surface processes of the enhancement of catalytic methane decomposition by low temperature plasma

Catalyst enhancement by atmospheric pressure plasma is a recently emerging field of research that embodies a complex system of reactive species and how they interact with surfaces. In this work we use an atmospheric pressure plasma jet integrated with a nickel on Al 2 O 3 /SiO 2 support catalyst material to decompose methane gas by partial oxidation reaction. We use Fourier-transform Infrared spectroscopy (FTIR) analysis of the gas phase post reaction to measure the loss of methane and the production of CO, CO 2 , and H 2 O and diffuse reflectance Fourier-transform Infrared spectroscopy (DRIFTs) in situ analysis of the catalyst surface as a function of both catalyst temperature and plasma operating parameters. We find reduction of methane by both plasma alone, catalyst alone, and an increase when both plasma and catalyst were simultaneously used. The production of CO appears to be due primarily to the plasma source as it only appears above 2.5 W plasma dissipated power and decreases as catalyst temperature increases. CO 2 production is enhanced by having the catalyst at high temperature and H 2 O production depends on both plasma power and temperature. Using DRIFTs we find that both heating and plasma treatment remove absorbed water on the surface of the catalyst. Plasma treatment alone however leads to the formation of CO and another IR spectral feature at 1590 cm -1 , which may be attributed to carboxylate groups, bonded to the catalyst surface. These species exhibit a regime of plasma treatment where they are formed on the surface and where they are significantly removed from the catalyst surface. We see the formation of a new spectral feature at 995 cm -1 and discuss the behavior and possible origins of this feature. Furthermore, this research highlights the potential for plasma regeneration of catalyst materials as well as showing enhancement of the catalytic behavior under low temperature plasma treatment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermoelectric studies of Ir 1 - x Rh x Te 2 ( 0 ≤ x ≤ 0.3 )

Here, we report thermoelectric properties of Ir 1–x Rh x Te 2 (0 ≤ x ≤ 0.3) alloy series where superconductivity at low temperatures emerges as the high-temperature structural transition (T s ) is suppressed. The isovalent ionic substitution of Rh into Ir has different effects on physical properties when compared to the anionic substitution of Se into Te, in which the structural transition is more stable with Se substitution. Rh substitution results in a slight reduction of lattice parameters and in an increase of number of carriers per unit cell. Weak-coupled BCS superconductivity in Ir 0.8 Rh 0.2 Te 2 that emerges at low temperature (T c zero = 2.45K) is most likely driven by electron-phonon coupling rather than dimer fluctuations mediated pairing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dual technicolor with hidden local symmetry

We consider a dual description of the technicolor-like gauge theory within the D4/D8-brane configuration with varying confinement and electroweak symmetry breaking scales. Constructing an effective truncated model valid below a certain cutoff, we identify the particle spectrum with Kaluza-Klein modes of the model in a manner consistent with the hidden local symmetry. Integrating out heavy states, we find that the low-energy action receives nontrivial corrections stemming from the mixing between standard model and heavy gauge bosons, which results in reduction of oblique parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

From T b 3 N i 2 to T b 3 CoNi : The interplay between chemistry, structure, and magnetism

Formation, crystal structure, and macroscopic and microscopic magnetism of the binary Tb 3 Ni 2 and derivative pseudobinary Tb 3 Co x Ni 2-x phases have been investigated using an array of experimental methods. While Tb 3 Ni 2 crystallizes in the monoclinic Dy 3 Ni 2 structure type (mS20, C2/m), the substitution of Co for Ni results in a structural transition into the rhombohedral Er 3 Ni 2 type (hR45, R$\overline{3}$h) at x(Co) ≈ 0.34 and beyond in the Tb 3 Co x Ni 2-x system. In both the monoclinic and rhombohedral phases, the addition of Co leads to an anisotropic change of lattice parameters and unexpected reduction of the cell volume. Measurements of bulk properties reveal that these compounds order ferrimagnetically or ferromagnetically at about 100 K. Complex noncollinear ferromagnetic ordering in the Tb sublattices is weakly dependent on composition. Lastly, for x > 0.34 the long-range magnetic ordering leads to a strong anisotropic magnetostriction accompanied by a symmetry reduction from rhombohedral to triclinic.

36 MATERIALS SCIENCE↗

Tailoring Surface Roughness Using Additive Manufacturing to Improve Internal Cooling

Abstract Surface roughness present on internal cooling channels produced with additive manufacturing has been previously shown to augment heat transfer and pressure loss to levels similar to traditionally cast turbulators. Given the ability of the surface roughness to improve the cooling performance of small cooling channels, the question arises on whether there is an optimal combination of random roughness features to maximize internal cooling performance. To investigate this question, test coupons with different surface roughness morphologies and magnitudes were manufactured by manipulating the parameters in the laser powder bed fusion additive manufacturing process. The coupons were tested to characterize the friction factor and Nusselt number of the cooling channels over a range of Reynolds numbers. Results showed that certain roughness combinations outperformed others, increasing the internal cooling performance of the channels. Additionally, manipulation of the performance using the process parameters allowed for reductions in build time, which could be useful for controlling component cost.

Engineering↗

Impact of proton irradiation on dc performance of AlGaN/GaN high electron mobility transistors

The effects of proton irradiation dose on dc characteristics and the reliability of AlGaN/GaN high electron mobility transistors (HEMTs) were investigated. The HEMTs were irradiated with protons at a fixed energy of 5 MeV and doses ranging from 109 to 2 1014 cm-2. For the dc characteristics, there was only minimal degradation of saturation drain current (IDSS), transconductance (gm), electron mobility and sheet carrier concentration at doses below 2 1013 cm-2, while the reduction of these parameters were 15%, 9%, 41% and 16.6%, respectively, at a dose of 2 1014 cm-2. At this same dose condition, increases of 37% in drain breakdown voltage (VBR) and of 45% in critical voltage (Vcri) were observed. The improvement of device reliability was attributed to the modification of the depletion region due to the introduction of a higher density of defects after irradiation at a higher dose.

Liu, L.↗