Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase one”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Alternative OTEC Scheme for a Submarine Robot

A proposed system for exploiting the ocean thermal gradient to generate power would be based on the thawing-expansion/ freezing-contraction behavior of a wax or perhaps another suitable phase-change material. The power generated by this system would be used to recharge the batteries in a battery-powered unmanned underwater vehicle [UUV (essentially, a small exploratory submarine robot)] of a type that has been deployed in large numbers in research pertaining to global warming. A UUV of this type travels between the ocean surface and various depths, measuring temperature and salinity. This proposed system would be an alternative to another proposed ocean thermal energy conversion (OTEC) system that would serve the same purpose but would utilize a thermodynamic cycle in which CO2 would be the working fluid. That system is described in Utilizing Ocean Thermal Energy in a Submarine Robot (NPO-43304), immediately following this brief. The main advantage of this proposed system over the one using CO2 is that it could derive a useful amount of energy from a significantly smaller temperature difference. At one phase of its operational cycle, the system now proposed would utilize the surface ocean temperature (which lies between 15 and 20 C over most of the Earth) to melt a wax (e.g., pentadecane) that has a melting/freezing temperature of about 10 C. At the opposite phase of its operational cycle, the system would utilize the lower ocean temperature at depth (e.g., between 4 and 7 C at a depth of 300 m) to freeze the wax. The melting or freezing causes the wax to expand or contract, respectively, by about 8 volume percent.

Jones, Jack↗
NASA NTRS2010

Origin of the Central Constant Emission Component of Eta Carinae

The X-ray campaign observation of the wind-wind colliding (WWC) binary system, Eta Carinae, targeted at its periastron passage in 2003, presented a detailed view of the flux and spectral variations of the X-ray minimum phase. One of the discoveries in this campaign was a central constant emission (CCE) component very near the central WWC source (Hamaguchi et al. 2007, ApJ, 663, 522). The CCE component was noticed between 1-3 keY during the X-ray minima and showed no variation on either short timescales within any observation or long timescales of up to ~ 10 years. Hamaguchi et al. (2007) discussed possible origins as collisionally heated shocks from the fast polar winds from Eta Car or the fast moving outflow from the WWC with the ambient gas, or shocked gas that is intrinsic to the wind of Eta Car. During the 2009 periastron passage, we launched another focussed observing campaign of Eta Carinae with the Chandra, XMM-Newton and Suzaku observatories, concentrating on the X-ray faintest phase named the deep X-ray minimum. Thanks to multiple observations during the deep X-ray minimum, we found that the CCE spectrum extended up to 10 keV, indicating presence of hot plasma of kT approx.4-6 keV. This result excludes two possible origins that assume relatively slow winds (v approx. 1000 km/s) and only leaves the possibility that the CCE plasma is wind blown bubble at the WWC downstream. The CCE spectrum in 2009 showed a factor of 2 higher soft band flux as the CCE spectrum in 2003, while the hard band flux was almost unchanged. This variation suggests decrease in absorption column along the line of sight. We compare this result with recent increase in V-band magnitude of Eta Carinae and discuss location of the CCE plasma.

Hamaguchi, Kenji↗
DOE OSTI2023

5ω Optical Thomson Scattering Report

The 5ω Optical Thomson Scattering system on the National Ignition Facility (NIF) is a diagnostic designed to measure temporally and spatially resolved plasma conditions in Inertial Confinement Fusion (ICF) Hohlraums. The system was proposed in 2014 and a phased approach to implementation was developed. In phase one the collection system was designed, built, and fielded on the NIF to be used for 3ω Thomson scattering measurements and background measurements near 211 nm (5ω. The initial commissioning experiment for the collection system was completed in Oct. 2016. Commissioning of the collection system continued through 2017 and the system is now fielded for a range of user experiments and regularly produces publication quality data. A dedicated 5ω probe laser was designed and built to allow Thomson scattering measurements in the presence of 2 MJ of 3ω drive energy. Due to scattered light (spectral reflections, laser-plasma instabilities, and unconverted drive energy) from the 3w drive lasers typical wavelengths (2ω and 4ω) fielded at other laser facilities like the Nova Laser Facility and the Omega Laser Facility were unable to meeting the signal to background requirements in design studies. A 10 Joule 5ω probe was proposed as a solution that met requirements. This 10 Joule laser was more energetic than previously fielded 5w lasers by 2-3 orders of magnitude. As part of a risk reduction plan, phase two of the project was to develop a 1 Joule, 5ω laser to demonstrate conversion efficiency >20% from 1ω to 5ω and make initial Thomson scattering measurements in the first few nanoseconds of an ICF laser pulse. Initial tests of the 5w conversion were completed at the Laboratory for Laser Energetics (LLE) and produced record 5ω energies. Based on these results from LLE, a 1 Joule, 5w laser system was designed for the NIF in 2018 and commissioning began in 2019. Commissioning of the 5ω laser system continued through 2023 and was eventually paused in Q1 of FY24 due to completing resource constraints. Commissioning of the 5w laser system proved incredibly challenging. Multiple issues were identified during commissioning and resolved, but issues remain. Currently there is not a clear understanding of why 5ω scattered has not been detected on the OTS collection system. Based on offline measurements, calculations, and preshot measurements the system appears to meet all requirements. Potential target physics issues have been investigated and do not appear to be an issue. The current hypothesis is that there is an error in one or more aspects of the offline testing not translating to expected performance when the system is fielded on the NIF. Additional full system testing in-situ utilizing the complete OTS system and NIF target chamber center time is needed to further test potential failure modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Broken symmetries and excitation spectra of interacting electrons in partially filled Landau levels

Interacting electrons in flat bands give rise to a variety of quantum phases. One fundamental aspect of such states is the ordering of the various flavours – such as spin or valley – that the electrons can undergo and the excitation spectrum of the broken symmetry states that they form. These properties cannot be probed directly with electrical transport measurements. The zeroth Landau level of monolayer graphene with four-fold spin-valley degeneracy is a model system for such investigations, but the nature of its broken symmetry states – particularly at partial fillings – is still not understood. Here, in this study, we demonstrate a non-invasive spectroscopic technique with a scanning tunneling microscope and use it to perform measurements of the valley polarization of the electronic wavefunctions and their excitation spectrum in the partially filled zeroth Landau level of graphene. We can extract information such as the strength of Haldane pseudopotentials that characterize the repulsive interactions underlying the fractional quantum states. Our experiments also demonstrate that fractional quantum Hall phases are built upon broken symmetry states that persist at partial filling. Our experimental approach quantifies the valley phase diagram of the partially filled Landau level as a model flat band platform which is applicable to other graphene-based electronic systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1998

Can Kelvin-Helmholtz Instabilities of Jet-Like Structures and Plumes Cause Solar Wind Fluctuations at 1AU

During its south polar passage in 1994, Ulysses sampled the solar wind emerging from the south polar coronal hole. In analysing these data two types of density fluctuations lasting a few hours have been reported, one characterized by fluctuations in velocity gradients ("microstreams") and the other by magnetic plus thermal-pressure balance structures ("PBS"). Microstreams were both temporal and spatial in nature. At higher frequencies, MHD turbulence was observed and found to be less evolved than in the ecliptic, but essentially independent of heliographic latitude. It is argued here that microstreams, PBS, and MHD turbulence could all be the remnant of shears associated with plumes and other filamentary structures ("jets") which have been reported to exist in coronal holes. The shear between a jet and its ambient can become unstable to the MHD Kelvin-Helmholtz ("KH') instability at 5-10 solar radius and the propagating instability can cause fluctuations like those seen by Ulysses. This motivates us to simulate coronal jets using a 3D MHD ZEUS code. The first 2D results have just started to come and are promising. To study the KH instability the jet is perturbed at the boundary with a linear amplitude and fixed frequency. The jet seems to pass through various distinct phases, one of which Is apparently dominated by KH instabilities. These instabilities drive oblique shocks into the jet as the turbulent eddies contact the jet surface. It is known that KH instabilities and internal shock waves are partially suppressed by magnetic field tension. Hence, in simulating far along the jet the Instability is expected to produce Alfvenic fluctuations like those seen near 1 AU.

Parhi, Shyamsundar↗
NASA NTRS1998

The Physics of Hard Spheres Experiment on MSL-1: Required Measurements and Instrument Performance

The Physics of HArd Spheres Experiment (PHaSE), one of NASA Lewis Research Center's first major light scattering experiments for microgravity research on complex fluids, flew on board the Space Shuttle's Microgravity Science Laboratory (MSL-1) in 1997. Using colloidal systems of various concentrations of micron-sized plastic spheres in a refractive index-matching fluid as test samples, illuminated by laser light during and after crystallization, investigations were conducted to measure the nucleation and growth rate of colloidal crystals as well as the structure, rheology, and dynamics of the equilibrium crystal. Together, these measurements support an enhanced understanding of the nature of the liquid-to-solid transition. Achievement of the science objectives required an accurate experimental determination of eight fundamental properties for the hard sphere colloidal samples. The instrument design met almost all of the original measurement requirements, but with compromise on the number of samples on which data were taken. The instrument performs 2-D Bragg and low angle scattering from 0.4 deg. to 60 deg., dynamic and single-channel static scattering from 10 deg. to 170 deg., rheology using fiber optics, and white light imaging of the sample. As a result, PHaSE provided a timely microgravity demonstration of critical light scattering measurement techniques and hardware concepts, while generating data already showing promise of interesting new scientific findings in the field of condensed matter physics.

Doherty, Michael P.↗
NASA NTRS2003

On the Hilbert-Huang Transform Data Processing System Development

One of the main heritage tools used in scientific and engineering data spectrum analysis is the Fourier Integral Transform and its high performance digital equivalent - the Fast Fourier Transform (FFT). The Fourier view of nonlinear mechanics that had existed for a long time, and the associated FFT (fairly recent development), carry strong a-priori assumptions about the source data, such as linearity and of being stationary. Natural phenomena measurements are essentially nonlinear and nonstationary. A very recent development at the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC), known as the Hilbert-Huang Transform (HHT) proposes a novel approach to the solution for the nonlinear class of spectrum analysis problems. Using the Empirical Mode Decomposition (EMD) followed by the Hilbert Transform of the empirical decomposition data (HT), the HHT allows spectrum analysis of nonlinear and nonstationary data by using an engineering a-posteriori data processing, based on the EMD algorithm. This results in a non-constrained decomposition of a source real value data vector into a finite set of Intrinsic Mode Functions (IMF) that can be further analyzed for spectrum interpretation by the classical Hilbert Transform. This paper describes phase one of the development of a new engineering tool, the HHT Data Processing System (HHTDPS). The HHTDPS allows applying the "T to a data vector in a fashion similar to the heritage FFT. It is a generic, low cost, high performance personal computer (PC) based system that implements the HHT computational algorithms in a user friendly, file driven environment. This paper also presents a quantitative analysis for a complex waveform data sample, a summary of technology commercialization efforts and the lessons learned from this new technology development.

Kizhner, Semion↗
DOE OSTI2022

Estimation of conditional cumulative incidence functions under generalized semiparametric regression models with missing covariates, with application to analysis of biomarker correlates in vaccine trials

Herein, this article presents generalized semiparametric regression models for conditional cumulative incidence functions with competing risks data when covariates are missing by sampling design or happenstance. A doubly robust augmented inverse probability weighted (AIPW) complete-case approach to estimation and inference is investigated. This approach modifies IPW complete-case estimating equations by exploiting the key features in the relationship between the missing covariates and the phase-one data to improve efficiency. An iterative numerical procedure is derived to solve the nonlinear estimating equations. The asymptotic properties of the proposed estimators are established. A simulation study examining the finite-sample performances of the proposed estimators shows that the AIPW estimators are more efficient than the IPW estimators. The developed method is applied to the RV144 HIV-1 vaccine efficacy trial to investigate vaccine-induced IgG binding antibodies to HIV-1 as correlates of acquisition of HIV-1 infection while taking account of whether the HIV-1 sequences are near or far from the HIV-1 sequences represented in the vaccine construct.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1991

Expert system decision support for low-cost launch vehicle operations

Progress in assessing the feasibility, benefits, and risks associated with AI expert systems applied to low cost expendable launch vehicle systems is described. Part one identified potential application areas in vehicle operations and on-board functions, assessed measures of cost benefit, and identified key technologies to aid in the implementation of decision support systems in this environment. Part two of the program began the development of prototypes to demonstrate real-time vehicle checkout with controller and diagnostic/analysis intelligent systems and to gather true measures of cost savings vs. conventional software, verification and validation requirements, and maintainability improvement. The main objective of the expert advanced development projects was to provide a robust intelligent system for control/analysis that must be performed within a specified real-time window in order to meet the demands of the given application. The efforts to develop the two prototypes are described. Prime emphasis was on a controller expert system to show real-time performance in a cryogenic propellant loading application and safety validation implementation of this system experimentally, using commercial-off-the-shelf software tools and object oriented programming techniques. This smart ground support equipment prototype is based in C with imbedded expert system rules written in the CLIPS protocol. The relational database, ORACLE, provides non-real-time data support. The second demonstration develops the vehicle/ground intelligent automation concept, from phase one, to show cooperation between multiple expert systems. This automated test conductor (ATC) prototype utilizes a knowledge-bus approach for intelligent information processing by use of virtual sensors and blackboards to solve complex problems. It incorporates distributed processing of real-time data and object-oriented techniques for command, configuration control, and auto-code generation.

Szatkowski, G. P.↗
DOE OSTI2025

Gramicidin and chlorhexidine encapsulated in bicontinuous microemulsions: Antimicrobial activity performance and their impact on self‐assembly

The utility of bicontinuous microemulsions (BMEs) as carriers of the antimicrobial peptide (AMP) gramicidin D and antiseptic chlorhexidine was investigated for possible topical delivery to chronic wounds. The two water-insoluble solutes dissolved in pre-formed one-phase BMEs of Water/Polysorbate 80/Limonene/Ethanol/Glycerol and Water/Aerosol-OT (AOT)/Polysorbate 85/Isopropyl Myristate and an AOT/Polysorbate 85 Winsor-III system, achieving gramicidin and chlorhexidine concentrations of 1.0 wt% and 0.5% individually and 0.5% and 0.3% in mixtures at 22°C, respectively. Small-angle neutron scattering measurements demonstrated that both solutes decreased surfactant interfacial activity and increased interfacial fluidity for the Polysorbate 80 system. For the AOT/Polysorbate 85 systems, ellipsoidal aggregates consisting of gramicidin and likely adsorbed surfactant and oil formed, while chlorhexidine enhanced the surface activity of surfactants. According to bioassays performed on artificial skin, the incorporation of melittin, gramicidin, and chlorhexidine in general enhanced the bioactivity of Polysorbate 80 BMEs for 24 h treatment against relevant antibiotic-resistant bacteria found on skin relative to controls. Yet, BME treatments were less effective than aqueous melittin control, in contrast to well diffusion bioassays performed previously. The results reflect the strong impact of AMPs and antiseptics on BME structure and dynamics and the complexity of formulating BMEs for optimal antimicrobial activity.

antimicrobial peptides↗
DOE OSTI2023

Dark matter from a conformal Dark Sector

We consider theories in which a dark sector is described by a Conformal Field Theory (CFT) over a broad range of energy scales. A coupling of the dark sector to the Standard Model breaks conformal invariance. While weak at high energies, the breaking grows in the infrared, and at a certain energy scale the theory enters a confined (hadronic) phase. One of the hadronic excitations can play the role of dark matter. We study a “Conformal Freeze-In” cosmological scenario, in which the dark sector is populated through its interactions with the SM at temperatures when it is conformal. In this scenario, the dark matter relic density is determined by the CFT data, such as the dimension of the CFT operator coupled to the Standard Model. We show that this simple and highly predictive model of dark matter is phenomenologically viable. The observed relic density is reproduced for a variety of SM operators (“portals”) coupled to the CFT, and the resulting models are consistent with observational constraints. The mass of the COFI dark matter candidate is predicted to be in the keV-MeV range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Beyond AdS 2 /dCFT 1 : insertions in two Wilson loops

We consider two-point correlators of local operator insertions in a system of two Wilson-Maldacena loops in $\mathcal{N}$ = 4 supersymmetric Yang-Mills theory on both sides of the AdS/CFT correspondence. On the holographic side the correlator of two Wilson-Maldacena loops is given by a classical string world-sheet which in one phase connects two asymptotically AdS 2 regions and in the other phase is given by two disconnected AdS 2 caps; this configuration breaks supersymmetry as well as conformal invariance. We present a complete systematic account of the string world-sheet fluctuations, including the fermionic sector, and study the behavior of the holographic two-point correlators. On the field theory side we compute certain two-point correlators of local operator insertions by resumming sets of ladder diagrams. Our results demonstrate the efficacy of previously developed methods in tackling this non-conformal, non-susy regime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Holographic BCFT with a Defect on the End-of-the-World brane

In this paper, we propose a new gravity dual for a 2d BCFT with two conformal boundaries by introducing a defect that connects the two End-of-the-World branes. We demonstrate that the BCFT dual to this bulk model exhibits a richer lowest spectrum. The corresponding lowest energy eigenvalue can continuously interpolate between - πc 24 Δ x and 0 where Δ x is the distance between the boundaries. This range was inaccessible to the conventional AdS/BCFT model with distinct boundary conditions. We compute the holographic entanglement entropy and find that it exhibits three different phases, one of which breaks the time reflection symmetry. We also construct a wormhole saddle, analogous to a 3d replica wormhole, which connects different boundaries through the AdS bulk. This saddle is present only if the BCFT is non-unitary and is always subdominant compared to the disconnected saddle.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Multiscale modeling of microwave-heated multiphase systems

Modeling of microwave heating of multiphase systems requires resolving the electromagnetic field from the single particle to the entire cavity. We introduce a multiscale methodology for computationally affordable simulations of microwave heating of multiphase systems consisting of one phase dispersed in a continuum phase. The methodology homogenizes the original multiphase system, by taking advantage of the large separation of length scales, to calculate the effective permittivity, effective thermal conductivity, and volumetric power absorbed in each phase. The methodology is rigorously assessed against particle-resolved detailed numerical simulations of model systems. We demonstrate a significant reduction in computational cost while retaining the accuracy of detailed simulations. Lastly, the present methodology enables high throughput exploration of novel multiphase system designs utilizing microwave heating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A new tubular ironless linear induction motor using non-interrupted winding method

The ironless linear induction motor device can be used for any application which requires a large motion span or rotation restrictedly by the ironless feature due to the strong magnetic field environment. One of the possible applications is ITER diagnostics shutters. The tokamak reactor systems have a severe radiation issue during the operation. The traditional Kapton-insulated wires have significantly lower radiation resistance than an expected large radiation dose at ITER Motion Stark Effect (MSE) shutter location. Furthermore, the traditional single-sided linear induction motor winds the wire to make the N-turn pitch coils independently and then connect them in series to make a one-phase winding. Therefore, it is a big challenge to make so many radiation-protection connectors in such a limited space as inside the vacuum vessel of fusion reactors. The approved mineral-insulated kinds of cables need a large bend radius for the end turns, so the traditional single-sided linear motor with two-layer three-phase windings need to be upgraded to the tubular linear motors. The new proposed tubular ironless linear induction motor can not only overcome the large bend radius issue with the mineral-insulated cables but also allow the motor coils wound continuously around the tubular-shaped stator, forward and backward N times to make a N-turn winding for each phase, in order to resolve the radiation protection issue with the winding connection. The 3D transient Maxwell electromagnetic model with a tubular three-phase linear induction motor has been analyzed. Furthermore, this paper will present the detailed design and winding method of ironless linear induction motor actuators, and results of the 3D transient numerical simulation of the actuator performance.

Ironless↗
DOE OSTI2020

Structural Tolerance Factor Approach to Defect-Resistant I 2 -II-IV-X 4 Semiconductor Design

Recent work on quaternary semiconductors Cu 2 BaSn(S,Se) 4 and Ag 2 BaSnSe 4 for photovoltaic and thermoelectric applications, respectively, has shown the promise of exploring the broader family of defect-resistant I 2 -II-IV-X 4 materials (where I, II, and IV refer to the formal oxidation state of the metal cations and X is a chalcogen anion) with tetrahedrally coordinated I/IV cations and larger II cations (i.e., Sr, Ba, Pb, and Eu) for optoelectronic and energy-related applications. Chemical dissimilarity among the II and I/IV atoms represents an important design motivation because it presents a barrier to antisite formation, which otherwise may act as electronically harmful defects. We herein show how all 31 experimentally reported I 2 -II-IV-X 4 examples (with large II cations and tetrahedrally coordinated smaller I/IV cations), which form within five crystal structure types, are structurally linked. Based on these structural similarities, we derive a set of tolerance factors that serve as descriptors for phase stability within this family. Despite common usage in the well-studied perovskite system, Shannon ionic radii are found to be insufficient for predicting metal–chalcogen bond lengths, pointing to the need for experimentally derived correction factors as part of an empirically driven learning approach to structure prediction. Here, we use the tolerance factors as a predictive tool and demonstrate that four new I 2 -II-IV-X 4 compounds, Ag 2 BaSiS 4 , Ag 2 PbSiS 4 , Cu 2 PbGeS 4 , and Cu 2 SrSiS 4 , can be synthesized in correctly predicted phases. One of these compounds, Ag 2 PbSiS 4 , shows potentially promising optoelectronic properties for photovoltaic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Insight into pseudo-film-boiling in supercritical water under simplified interfacial conditions

The focus of this paper is the physics of supercritical water film boiling through the simulation of natural convection of supercritical water in a rectangular cavity. It has been widely believed that above a fluid's critical point, only one phase exists. However, recent research has indicated the existence of distinct gas-like and liquid-like regions separated by the Widom line, which is the locus of the maxima of the specific heat. Along the Widom line, density decreases sixfold, viscosity drops by a factor of two, while specific heat spikes by an order of magnitude. These variations, specifically in density and viscosity, produce a thick pseudo-interface and flow dynamics behavior akin to film-boiling, denoted here as pseudo-two-phase flow dynamics. When the cavity is heated from the bottom, a pseudo-film of gas-like fluid is formed at the heated wall, and the flow complexity evolves, characterized by the formation of multiple vortices. Results demonstrate the ability of modern conjugate heat transfer computational fluid dynamics to capture the pseudo two-phase regime, with the formation of a pseudo-film at the heated wall. Further, the boiling curve is studied, showing an increase in heat flux with an increase in the temperature differential between the wall and the pseudo-critical temperature. Furthermore, results also show a previously uncharacterized instability, where the convection cells in the cavity oscillate and can flip directions under certain conditions.

Computational fluid dynamics↗
DOE OSTI2022

Fe 1+ y Te x Se1- x : A Delicate and Tunable Majorana Material

Here, we report the observation for the p z electron band and the band inversion in Fe 1 + y Te x Se 1–x with angle-resolved photoemission spectroscopy. Furthermore, we found that excess Fe (y > 0) inhibits the topological band inversion in Fe 1 + y Te x Se 1 – x , which explains the absence of Majorana zero modes in previous reports for Fe 1+y Te x Se 1 – x with excess Fe. Based on our analysis of different amounts of Te doping and excess Fe, we propose a delicate topological phase in this material. Thanks to this delicate phase, one may be able to tune the topological transition via applying lattice strain or carrier doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗