SEARCH · Search NASA

Results for “power takeoffs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Thrust vectoring for single-stage-to-orbit, horizontal takeoff, horizontal landing, space vehicles

The preliminary design of a horizontal takeoff, horizontal landing, single-stage-to-orbit, rocket-powered space vehicle was performed. The purpose was to examine technology requirements for future small payload launch vehicles. The distinguishing aspect of the design was the utilization of thrust vectoring to provide half of the lift at takeoff. The inclusion of a canard was necessary to provide additional lift at takeoff and to balance the moments produced with thrust vectoring. A weights estimation, an aerodynamic assessment, a trajectory analysis, and a gear weight analysis were performed. The takeoff weight of the resulting vehicle was approximately 1.26 million pounds, based on advanced technology structures and subsystems. The vehicle was designed to deliver a 5000-pound payload to a polar orbit.

Cunningham, M. J.↗

NASA NTRS1983

A flight-test evaluation of a go-around control system for a twin engine powered-lift STOL airplane

An automatic go-around control system was evaluated on the Augmentor Wing Jet Short Takeoff and Landing (STOL) Research Airplane (AWJSRA) as part of a study of an automatic landing system for a powered-lift STOL airplane. The results of the evaluation indicate that the go-around control system can successfully transition the airplane to a climb configuration from any initiation point during the glide-slope track or the flare maneuver prior to touchdown.

Watson, D. M.↗

NASA NTRS1972

Space shuttle horizontal flight test plan

A horizontal takeoff flight test concept for testing space shuttle vehicles is presented. The guidelines used in planning and support requirements for the flight tests are developed. Details of the test program are provided. The instrumentation requirements are defined. The limitations imposed by the short flight endurance and restricted maneuvering capability of the shuttle booster/orbiter in the horizontal mode are described. The test program covers the following investigations. (1) stall and lift boundary tests, (2)takeoff and landing tests, (3) level flight speed power tests, (4) longitudinal and laterial directional dynamic stability, and (5) static directional stability.

Mosley, R. L.↗

NASA NTRS1975

Forward velocity effects on under-the-wing externally blown flap noise

Noise tests were conducted with small-scale models of externally blown-flap powered-lift systems that were subjected to simulated takeoff and landing free-stream velocities by placing the nozzle-wing models in a free jet. The nozzle configurations consisted of a conical and an 8-tube mixer nozzle. The results show that the free-stream velocity attenuates the noise from the various configurations, with the amount of attenuation depending on the flap setting. More attenuation was obtained with a flap setting of 20 degrees than with a flap setting of 60 degrees. The dynamic effect on the total attenuation caused by aircraft motion is also discussed.

Goodykoontz, J.↗

NASA NTRS1975

Forward velocity effects on under-the-wing externally blown flap noise

Noise tests were conducted with small-scale models of externally blown-flap powered-lift systems that were subjected to simulated takeoff and landing free-stream velocities by placing the nozzle-wing models in a free jet. The nozzle configurations consisted of a conical and an 8-tube mixer nozzle. The results showed that the free-stream velocity attenuated the noise from the various configurations with the amount of attenuation depending on the flap setting. More attenuation was obtained with a flap setting of 20 deg than with a flap setting of 60 deg. The dynamic effect on the total attenuation caused by aircraft motion is also discussed.

Goodykoontz, J.↗

NASA NTRS1977

Preliminary study of tug-glider freight systems utilizing a Boeing 747 as the tug

Performance of the tug-glider system was severely limited by ground run. In most cases studied, additional engines were necessary. Except at short ranges for which additional payload were carried in the tow plane, the productivity of the basic aircraft was degraded by a reduction in cruise speed necessitated by the glider drag. Excessive aspect ratios did not improve system performance because of the increase in glider wing weight. Powered gliders using a tow plane only for takeoff and climb had the potential for a major reduction in fuel consumption. Uncertainty of restrictive regulatory action and the apparently increased airborne investment per unit productivity are obstacles to commercial development.

Heyson, H. H.↗

NASA NTRS1988

Aerospace vehicle design, spacecraft section. Volume 1

The objective was to create a manned Martian aircraft which can perform: scientific surveys of particular sites distant from the base; a deployment of scientific instrument packages by air drop that land rovers cannot accomplish; and rescue operations. Designing the airfoil requires a wing which can operate within the low Reynolds numbers apparent on Mars. The airfoil, NASA NLF(1)-1015 was chosen. The design of the aircraft is comparable to a P-38 military aircraft. The aircraft uses fuel cells to power the two propellers. A rocket-assisted takeoff is necessary to enable Romulus to liftoff. Although the design and creation of Romulus would be an expensive adventure, such a vehicle could be most useful in evaluating the Mars surface and in creating a habitat for mankind.

Source record↗

NASA NTRS1992

Overview of NASA HSR high-lift program

The viewgraphs and discussion of the NASA High-Speed Research (HSR) Program being conducted to develop the technologies essential for the successful U.S. development of a commercial supersonic air transport in the 2005 timeframe are provided. The HSR program is being conducted in two phases, with the first phase stressing technology to ensure environmental acceptability and the second phase stressing technology to make the vehicle economically viable (in contrast to the current Concorde design). During Phase 1 of the program, a key element of the environmental emphases is minimization of community noise through effective engine nozzle noise suppression technology and through improving the performance of high-lift systems. An overview of the current Phase 1 High-Lift Program, directed at technology for community noise reduction, is presented. The total target for takeoff engine noise reduction to meet expected regulations is believed to be about 20 EPNdB. The high-lift research is stressing the exploration of innovative high-lift concepts and advanced flight operations procedures to achieve a substantial (approximately 6 EPNdB) reduction in community noise to supplement the reductions expected from engine nozzle noise suppression concepts; primary concern is focused on the takeoff and climbout operations where very high engine power settings are used. Significant reductions in aerodynamic drag in this regime will allow substantial reductions in the required engine thrust levels and therefore reductions in the noise generated.

Gilbert, William P.↗

NASA NTRS2008

Intelligent Engine Systems: Adaptive Control

We have studied the application of the baseline Model Predictive Control (MPC) algorithm to the control of main fuel flow rate (WF36), variable bleed valve (AE24) and variable stator vane (STP25) control of a simulated high-bypass turbofan engine. Using reference trajectories for thrust and turbine inlet temperature (T41) generated by a simulated new engine, we have examined MPC for tracking these two reference outputs while controlling a deteriorated engine. We have examined the results of MPC control for six different transients: two idle-to-takeoff transients at sea level static (SLS) conditions, one takeoff-to-idle transient at SLS, a Bode power command and reverse Bode power command at 20,000 ft/Mach 0.5, and a reverse Bode transient at 35,000 ft/Mach 0.84. For all cases, our primary focus was on the computational effort required by MPC for varying MPC update rates, control horizons, and prediction horizons. We have also considered the effects of these MPC parameters on the performance of the control, with special emphasis on the thrust tracking error, the peak T41, and the sizes of violations of the constraints on the problem, primarily the booster stall margin limit, which for most cases is the lone constraint that is violated with any frequency.

Gibson, Nathan↗

NASA NTRSDate not supplied

Operational Analysis of Vertiport Surface Topology

Urban Air Mobility (UAM) concepts and technologies are being developed to safely enable operations of small, electric-powered or hybrid, pilot-optional, vertical-takeoff-and-landing (VTOL) passenger and cargo aircraft at vertiport facilities in urban and suburban environments. It is likely that many of the highest demand locations for vertiports will be in space constrained urban environments, requiring vertiport designs to maximize throughput within a compact surface footprint. This paper presents several generic vertiport topology design approaches and evaluates their relative surface area utilization and operational efficiency under different wind constrained configurations while meeting safety driven spacing constraints derived from heliport design standards and subject matter expert interviews.

Urban air mobility↗

NASA NTRS1992

Mission and sizing analysis for the Beta II two-stage-to-orbit vehicle

NASA Lewis Research Center studied a horizontal takeoff and landing, fully reusable, two-stage-to-orbit (TSTO) vehicle capable of launching and returning a 10,000 pound payload to low earth orbit using low-risk technology. The vehicle, called Beta 2, was derived from the USAF/Boeing Beta vehicle, a TSTO study vehicle capable of launching a 50,000 pound payload to low earth orbit. Development of the Beta 2 from the USAF/Boeing Beta vehicle occurred in a series of iterations during which the size of the vehicle was decreased to accommodate the smaller payload, the staging Mach number was decreased from 8.0 to 6.5, and the rocket propulsion system was removed from the booster. The final Beta 2 vehicle consisted of a rocket powered orbiter and an all airbreathing booster. The gross takeoff weight of the Beta 2 vehicle was approximately 1.1 million pounds. In addition to its baseline mission, the Beta 2 was capable of delivering approximately 17,500 pounds to the Space Station with the same takeoff gross weight. The mission and sizing analysis performed to arrive at the Beta 2 vehicle is discussed.

Nadell, Shari-Beth↗

NASA NTRS1992

Mission and sizing analysis for the Beta 2 two-stage-to-orbit vehicle

NASA Lewis Research Center studied a horizontal takeoff and landing, fully reusable, two-stage-to-orbit (TSTO) vehicle capable of launching and returning a 10,000 pound payload to low Earth polar orbit using low-risk technology. The vehicle, called Beta 2, was derived from the USAF/Boeing Beta vehicle, a TSTO study vehicle capable of launching a 50,000 pound payload to low Earth polar orbit. Development of the Beta 2 from the USAF/Boeing Beta vehicle occurred in a series of iterations during which the size of the vehicle was decreased to accommodate the smaller payload, the staging Mach number was decreased from 8.0 to 6.5, and the rocket propulsion system was removed from the booster. The final Beta 2 vehicle consisted of a rocket powered orbiter and an all airbreathing booster. The gross takeoff weight of the Beta 2 vehicle was approximately 1.1 million pounds. In addition to its baseline mission, the Beta 2 was capable of delivering approximately 17,500 pounds to the Space Station with the same takeoff gross weight. The mission and sizing analysis performed to arrived at the Beta 2 vehicle is discussed.

Nadell, Shari-Beth↗

NASA NTRS1988

Application of empirical and linear methods to VSTOL powered-lift aerodynamics

Available prediction methods applied to problems of aero/propulsion interactions for short takeoff and vertical landing (STOVL) aircraft are critically reviewed and an assessment of their strengths and weaknesses provided. The first two problems deal with aerodynamic performance effects during hover: (1) out-of-ground effect, and (2) in-ground effect. The first can be evaluated for some multijet cases; however, the second problem is very difficult to evaluate for multijets. The ground-environment effects due to wall jets and fountain flows directly affect hover performance. In a related problem: (3) hot-gas ingestion affects the engine operation. Both of these problems as well as jet noise affect the ability of people to work near the aircraft and the ability of the aircraft to operate near the ground. Additional problems are: (4) the power-augmented lift due to jet-flap effects (both in- and out-of-ground effects), and (5) the direct jet-lift effects during short takeoff and landing (STOL) operations. The final problem: (6) is the aerodynamic/propulsion interactions in transition between hover and wing-borne flight. Areas where modern CFD methods can provide improvements to current computational capabilities are identified.

Margason, Richard↗

NASA NTRS1988

Application of empirical and linear methods to VSTOL powered-lift aerodynamics

Margason, Richard↗

NASA NTRSDate not supplied

Tail Sizing Considerations for Wingtip Propulsor Driven Aircraft Applied to the Parallel Electric-Gas Architecture with Synergistic Utilization Scheme (PEGASUS) Concept

This research focuses on the vertical tail sizing implications of a single propulsion system fault when using wingtip propulsors as applied to the PEGASUS concept. PEGASUS is a conceptual regional aircraft featuring wingtip propulsors, an aft boundary layer ingestion propulsor, and inboard propulsors. Using four propulsors on the wing, rather than the typical two, enables a reduction in the vertical tail size needed in the event of a single fault in the propulsion system. Achieving a reduction in vertical tail size, and its associated reduction in drag, is dependent on splitting the takeoff thrust appropriately between the inboard and wingtip propulsors. At takeoff, the wingtip propulsors can only provide a small portion of the takeoff thrust. Compared with a conventional baseline vehicle employing only inboard propulsors, the increased wetted area from the wingtip nacelles outweighs the cruise drag benefits obtained from the reduced tail size and the reduction in wingtip vortices due to the wingtip propellers. The research highlights the need for aggressive cruise drag reductions on PEGASUS, possibly through increased use of the boundary layer ingestion propulsor. By lowering the wingtip propulsor power at cruise, the propulsors would be better sized for takeoff and have smaller nacelles with lower drag.

Nathaniel J Blaesser↗

NASA NTRS1973

Engine-over-the-wing noise research

Acoustic measurements for large model eingine-over-the-wing (EOW) research configurations having both conventional and powered lift applications were taken for flap positions typical of takeoff and approach and at locations simulating flyover and sideline. The results indicate that the noise is shielded by the wing and redirected above it, making the EOW concept a prime contender for quiet aircraft. The large-scale noise data are in agreement with earlier small-model results. Below the wing, the EOW configuration is about 10 PNdb quieter than the engine-under-the-wing externally-blown-flap for powered lift, and up to 10 db quieter than the nozzle alone at high frequencies for conventional lift applications.

Reshotko, M.↗

NASA NTRS1973

Engine-over-the-wing noise research.

Acoustic measurements for large model engine-over-the-wing (EOW) research configurations having both conventional and powered lift applications were taken for flap positions typical of takeoff and approach and at locations simulating flyover and sideline. The results indicate that the noise is shielded by the wing and redirected above it, making the EOW concept a prime contender for quiet aircraft. The large-scale noise data are in agreement with earlier small-model results. Below the wing, the EOW configuration is about 10 PNdB quieter than the engine-under-the-wing externally-blown-flap for powered lift, and up to 10 dB quieter than the nozzle alone at high frequencies for conventional lift applications.

Reshotko, M.↗

NASA NTRS1974

A shuttle development flight test vehicle study

A study is presented that identifies the potential performance capability of the production shuttle orbiter for powered flight tests using several propulsion systems following vertical takeoff and using J-2 rocket engines following air launch. Of the approaches considered, the air-launched orbiter equipped with J-2 rocket engines appeared to have the highest potential for early shuttle development flights. With this approach, mach 4 appeared attainable using 45.5K kg (100K lb) of internal propellant. Several issues were identified that require resolution to prove feasibility.

Rainey, R. W.↗