Search NASA⌕ Search

SEARCH · Search NASA

Results for “preferential diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

ROSAT observations of NGC 2146: Evidence for a starburst-driven superwind

We have imaged the edge-on starburst galaxy NGC 2146 with the Position Sensitive Proportional Counter (PSPC) and the High Resolution Imager (HRI) on board ROSAT and have compared these data to optical images and long-slit spectra. NGC 2146 possesses a very large X-ray nebula with a half-light radius of 1 min (4 kpc) and a maximum diameter of approximately 4 min, or 17 kpc. The X-ray emission is resolved by the PSPC and preferentially oriented along the minor axis, with a total flux of 1.1 x 10(exp -12) ergs/sq cm/s over 0.2 - 2.4 keV and a luminosity of approximately 3 x 10(exp 40) ergs/s. The inner X-ray nebula is resolved by the HRI into at least four bright knots together with strong diffuse emission responsible for at least 50% of the flux within a radius of 0.5 min (approximately 2 kpc). The brightest knot has a luminosity of (2 - 3) x 10(exp 39) ergs/s. The X-ray nebula has a spatial extent much larger than the starburst ridge seen at centimeter wavelengths by Kronberg & Biermann (1981) and is oriented in a `X-like' pattern along the galaxy minor axis at a position angle of approximately 30 degrees. This minor-axis X-ray emission is associated with a region of H alpha and dust filaments seen in optical images. Optical spectra show that the emission-line gas along the minor axis is characterized by relatively broad lines (approximately 250 km/s full width half-maximum (FWHM)) and by `shocklike' emission-line flux ratios. Together with the blue-asymmetric nuclear emission-line and NaD interstellar absorption-line profiles, these optical data strongly suggest the presence of a starburst-driven superwind. The X-ray spectrum extracted from the central 5 min contains a strong Fe L emission-line complex at 0.6 - 1.0 keV and a hard excess above 1.0 keV. The spectrum is best described with a two-component model, containing a soft (kT approximately 400 - 500 eV) Raymond-Smith thermal plasma together with either a Gamma = 1.7 power-law or a kT greater than 2.2 keV bremsstrahlung component. The soft thermal component provides approximately 30% of the total luminosity over 0.2 - 2.4 keV, or approximately 10(exp 40) ergs/s. The pressure derived from the soft component of the X-ray spectrum is consistent with that predicted from a starburst-driven superwind if the filling factor of the warm gas is approximately 1% - 10 %. If the hard X-ray component is thermal gas associated with the galactic outflow, the filling factor must be close to unity. Predictions of the luminosity, temperature, and size of an adiabatic starburst-generated windblown bubble are consistent with those measured for the soft thermal X-ray emission in NGC 2146. The hard X-ray component, however, has a luminosity much larger than predicted by the superwind model if this component is thermal emission from gas heated by an internal shock in the expanding bubble. We briefly review various possibilities as to the nature of the hard X-ray component in NGC 2146.

Armus, L.↗
DOE OSTI2023

Characterization and molecular simulation of lignin in Cyrene pretreatment of switchgrass

Biomass-derived solvents have been proposed as a novel pathway in biorefining for the realization of biofuels and bioproducts derived from lignocellulosic biomass. Cyrene derived from cellulose has recently been shown to have a high potential as a green organic solvent for pretreating poplar biomass. However, due to its high dynamic viscosity nature, high Cyrene concentration could cause negative effects on the sugar release of the pretreated biomass as well as driving up the operational cost of the lignin recovery. In this study, we combine experimental and computational approaches to examine the impact of Cyrene pretreatment with reduced Cyrene concentration under mild conditions on switchgrass lignin. Our experimental studies indicated correlation between pretreatment condition and recovery and structure modification of lignin. Switchgrass lignin extracted by Cyrene pretreatment possessed high preservation of β-O-4 ether inter-unit linkage, which could provide versatility in the integration of downstream lignin valorization into the modern biorefinery industries. Molecular modeling examining the solvation of switchgrass lignin polymer and the disaggregation of low-molecular weight lignin aggregates under pretreatment conditions indicated that a preferential interaction exists between Cyrene and lignin, which likely drives lignin release, and that the disruption of inter-lignin contacts can be modulated as a non-monotonic function of Cyrene : water ratio. Further, while Cyrene–lignin interactions permit the solubilization of lignin, simulations with proxy reactive-species reveal that changes to the diffusion of these reactive proxies and their localization near linkage sites under Cyrene conditions may inhibit chemical processes. In conclusion, the results indicated that loss of pretreatment efficacy caused by low Cyrene concentration could be compensated by prolonged pretreatment time and high catalyst dosage.

09 BIOMASS FUELS↗
DOE OSTI2023

Mechanism and kinetic study of rare earth extraction from allanite by direct acid leaching

Direct acid leaching was conducted to recover rare earth elements (REEs) from an allanite ore assaying 9,861.4 ppm of REEs. The effects of operational variables such as acid type, sulfuric acid (H 2 SO 4 ) concentration, temperature, solid/liquid (S/L) ratio, and particle size on the total REE (TREE) recovery were systematically examined. The REE mineralogy and the involved leaching mechanisms were investigated by microscopic characterization and residue re-leaching tests. It was found that approximately 80% of REEs was extracted using 1 M H 2 SO 4 at 75 °C for 2 h. Increasing temperature significantly improved the REE extraction, while changing acid type, H 2 SO 4 concentration, and particle size did not. The TREE recovery also gradually decreased at higher S/L ratios. The low fraction of Si leached (<4.0%) suggested that the extraction did not significantly alter the crystal structure of the dominant mineral. The leaching kinetics of REEs were fast within the first 10 min, followed by a much slower stage (i.e., 10-120 min). The kinetic modeling results showed that each stage may be controlled by both chemical reaction and diffusion (i.e., mix control). The activation energies for REE leaching using 1 M H 2 SO 4 in the 0-10 min and 10-120 min were determined to be 20.3 and 10.8 kJ/mol, respectively. Finally, the residue re-leaching results suggested that the fast leaching kinetics at the beginning may be explained by the preferential decomposition of metamict allanite rather than the formation of silica gel, while the following slower leaching stage was due to the dissolution of difficult-to-leach REE-bearing minerals such as well-crystallized allanite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Phase-Selective Synthesis of Rhombohedral WS 2 Multilayers by Confined-Space Hybrid Metal–Organic Chemical Vapor Deposition

Rhombohedral polytype transition metal dichalcogenide (TMDC) multilayers exhibit non-centrosymmetric interlayer stacking, which yields intriguing properties such as ferroelectricity, a large second-order susceptibility coefficient χ (2) , giant valley coherence, and a bulk photovoltaic effect. These properties have spurred significant interest in developing phase-selective growth methods for multilayer rhombohedral TMDC films. Here, in this study, we report a confined-space, hybrid metal–organic chemical vapor deposition method that preferentially grows 3R-WS 2 multilayer films with thickness up to 130 nm. We confirm the 3R stacking structure via polarization-resolved second-harmonic generation characterization and the 3-fold symmetry revealed by anisotropic H 2 O 2 etching. The multilayer 3R WS 2 shows a dendritic morphology, which is indicative of diffusion-limited growth. Multilayer regions with large, stepped terraces enable layer-resolved evaluation of the optical properties of 3R-WS 2 via Raman, photoluminescence, and differential reflectance spectroscopy. These measurements confirm the interfacial quality and suggest ferroelectric modification of the exciton energies.

3R-WS2↗
NASA NTRS1994

Noble gas isotopes and halogens in volatile-rich inclusions in diamonds

Application of the (40)Ar-(39)Ar method and noble gas studies to diamonds has increased our understanding of their age relationships to the host kimberlite or lamproite, and of the source and composition of volatile-rich fluids in the upper mantle. The properties of diamond (inert, high mechanical strength and low gas diffusivities) means they are especially useful samples for studying gases trapped deep within the earth (less than 150 km) as they are unlikely to have undergone loss or exchange of entrapped material since formation. Volatile-rich fluids (H2O-CO2) are important agents for metasomatic processes in the upper mantle, and the noble gases and halogens preferentially partition into this phase leading to a strong geochemical coherence between these groups of elements. The abundances of the halogens in the major reservoirs of the Earth shows a marked progression from chlorine, concentrated in the oceans, through to iodine which, through its affinity to organic material, is concentrated mainly in sediments. Abundances in the upper mantle are low. This is particularly true for iodine which is of special interest in view of its potential significance as an indicator of sediment recycling and by way of its link to (129)Xe amomalies in the mantle through the low extinct isotope (129)I. Extensions of the (40)Ar-(39)Ar technique enable measurements of halogens and other elements (K, Ca, Ba, U) by production of noble gas isotopes from these species during neutron irradiation. Samples analyzed in this way include 15 coated stones from an unknown source in Zaire, 3 boarts from the Jwaneng and 1 boart from the Orapa kimberlites, both in Botswana.

Burgess, Raymond↗
DOE OSTI2024

Intermittent oxidation kinetics and metal/oxide interfacial undulation

The phenomenon of oxygen-adsorption-induced surface restructuring is widespread across various metal-oxygen systems, yet its impact on initiating bulk oxide formation remains largely unexplored. In this study, through in-situ atomic-resolution electron microscopy observations of surface oxidation of Cu(110) and Cu 85 Au 15 (110), we unveil intermittent oxide-film growth modulated by oxygen-induced surface restructuring. This modulation is evidenced by repeated pinning of Cu 2 O growth front at isolated Cu columns of the c(6×2)-O reconstruction, owing to required long-range diffusion of Cu and O atoms to the Cu 2 O growth front. We reveal that Cu vacancies, generated at the Cu 2 O growth front, are injected into the Cu 2 O/Cu interface, inducing hill-and-valley undulation of the Cu 2 O film. In contrast, atomic vacancies produced during the Cu 85 Au 15 (110) oxidation preferentially migrate into interfaces between Au-rich and Au-poor regions in the bulk, resulting in a flat and adherent Cu 2 O film. These findings demonstrate the critical role of oxygen-induced surface restructuring in modulating oxide-film-growth kinetics and manipulability of the fate of injected vacancies by alloying, thereby offering insights applicable to a broader range of metal-oxygen systems for fine-tuning oxidation kinetics and enhancing oxide/metal interfacial adhesion.

25 ENERGY STORAGE↗
DOE OSTI2025

Increased Defect Resistance and Ordering in MnBi 2 (Se 1– x Te x ) 4 via Accurate Diffusion Monte Carlo

Stabilizing materials and controlling defect formation remain key challenges in materials science, particularly for theory, where small energy differences must be resolved for accurate predictions. Here, we applied state-of-the-art theoretical methods to topological materials, focusing on MnBi 2 Te 4 (MBT), which is a promising intrinsic magnetic topological insulator. Antisite defects in MBT alter its electronic structure and magnetism, degrading topological properties and causing experimental inconsistencies. Using diffusion Monte Carlo and density functional theory, we investigated the thermodynamic stability and defect formation in MBT, MnBi 2 Se 4 (MBS), and MnBi 2 (Se 1–x Te x ) 4 . We found that MnBi 2 Se 2 Te 2 can be stable at finite temperatures, with higher defect formation energies due to stronger Mn–Se bonding and reduced internal strain. Se preferentially substitutes Te near Mn instead of Te in the outer layer, encouraging long-range ordering when incorporated. For MnBi 2 (Se 1–x Te x ) 4 , cluster expansion phase diagrams revealed solid solution behavior when x <0.5 and phase separation for larger x. MBT and MBS are topological insulators; therefore, the MnBi 2 (Se 1–x Te x ) 4 family could offer tunable topological behavior and improved stability.

MnBi2Te4↗
DOE OSTI2023

Strengthening model development and effects of low diffusing solutes to coarsening resistance in aluminum alloys

A modified Orowan strengthening model is proposed to account for finite rod-shaped precipitates with hemispherical caps in aluminum alloy systems. A combined computational and experimental approach is used to study the influences of anisotropic Orowan looping and solute-dislocation interaction on temperature-dependent yield strength. Here, the strengthening model is validated with a dataset containing 297 experimental precipitate geometries, chemistries, temperatures, and strength measurements, and achieves a strong predictive correlation of 0.8713 with experimentally measured yield strengths. Under conditions that are applicable to coarsening, constant particle volume fraction and aspect ratio, the model predicts that short rod precipitates provide far superior strengthening effects compared to plate precipitates. A cast Al-Si-Mg-Cu alloy with rod-shaped Q-phase (Al 3 Cu 2 Mg 9 Si 7 ) precipitates was developed with a novel chemistry exploring the use of low-diffusivity elements (Mn, Ni, V, Zr) to limit precipitate coarsening. The thermodynamic behavior of Mn, Ni, V, and Zr across the Q-phase interface is examined using transmission electron microscopy (TEM), first-principles density-functional theory (DFT) calculations. and atom-probe tomography (APT). DFT calculations utilizing TEM identified Q-phase/Al-matrix interfaces show that Mn, Ni, V, and Zr preferentially segregate to the Q-phase precipitate boundaries which suggests inhibition of precipitate coarsening and higher strengths after temperature exposure. Atom-probe tomography confirms solute atom partitioning/segregation at the Q-phase/Al-matrix interface, found in the modified commercial AS7GU alloy (A356 +0.5%Cu), which supports these observations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Acid Erosion of Carbonate Fractures and Accessibility of Arsenic-Bearing Minerals: In Operando Synchrotron-Based Microfluidic Experiment

Underground flows of acidic fluids through fractured rock can create new porosity and increase accessibility to hazardous trace elements such as arsenic. In this study, we developed a custom microfluidic cell for an in operando synchrotron experiment using X-ray attenuation. The experiment mimics reactive fracture flow by passing an acidic fluid over a surface of mineralogically heterogeneous rock from the Eagle Ford shale. Over 48 h, calcite was preferentially dissolved, forming an altered layer 200–500 μm thick with a porosity of 63–68% and surface area >10$\times$ higher than that in the unreacted shale as shown by xCT analyses. Calcite dissolution rate quantified from the attenuation data was 3 $\times$ 10 –4 mol/m 2 s and decreased to 3 $\times$ 10 –5 mol/m 2 s after 24 h because of increasing diffusion limitations. Erosion of the fracture surface increased access to iron-rich minerals, thereby increasing access to toxic metals such as arsenic. Quantification using XRF and XANES microspectroscopy indicated up to 0.5 wt % of As(-I) in arsenopyrite and 1.2 wt % of As(V) associated with ferrihydrite. This study provides valuable contributions for understanding and predicting fracture alteration and changes to the mobilization potential of hazardous metals and metalloids.

58 GEOSCIENCES↗
NASA NTRS1975

Thermal coupling apparatus for electroexplosive devices

This paper describes the equipment for nondestructive testing of electroexplosive devices using a thermal coupling technique. The technique utilizes a self-balancing bridge to apply a nominal amount of power to the bridge wire of the device. The bridge wire behaving as a thermal sensor detects heat flow into the device when heat is preferentially directed down the center of the explosive column toward the bridge wire. Thermal equilibrium is upset and the change in power from the self-balancing bridge is measured directly in watts. Faults such as omissions, incorrect materials, contamination, and so on, can be detected by observing the rate of heat flow to the bridge wire. The response is indicative of the thermal resistance and diffusivity of the system. The paper also presents data on electroexplosive devices loaded with inert and explosive materials.

Menichelli, V. J.↗
DOE OSTI2023

Determination of the Interfacial Energy between Graphene Nanoplatelets and Deuterated or Hydrogenated Polystyrene

The tracer diffusion coefficients of various graphene nanoplatelet-polystyrene (GNP-PS) systems were determined by using dynamic secondary ion mass spectrometry, which provided insights into the interactions within the polymer nanocomposite system. Bilayer films, where one contained trace amounts of deuterated polystyrene (dPS), were produced, and the interdiffusion was measured by detecting the position of the dPS interface. GNPs were placed in both or only one of the two layers. The diffusion coefficient was decreased when GNPs were present in both layers as compared to the samples without GNP, indicating an attractive interaction between GNP and polystyrene. Surprisingly, the coefficient increased relative to the control when GNPs were present only in the PS containing layer, whereas it decreased most strongly when GNP and dPS were present only in the same layer, indicating that an additional preference existed for GNPs and dPS. A significant difference in interfacial energies was measured using contact angle goniometry of PS or dPS droplets on flat GNP layers, confirming the preferential interaction. DFT calculations were used to calculate the interfacial interaction between GNP and dPS or PS, and they showed an attractive potential which was maximal when the PS rings were conformal with the GNP structure. Furthermore, the differential energy between PS and dPS at the GNP interface was in excellent agreement with the measured value. In contrast, contact angle goniometry indicated that the interaction between GNP and poly(methyl methacrylate) (PMMA) was unfavorable, and no difference in interfacial energy between dPMMA and PMMA was observed. Therefore, these techniques can provide a means for determining the relative affinity between GNP and different polymer hosts, which can be an important consideration in the mechanics and adhesion properties of the compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Combustion characteristics and detailed simulations of surrogates for a Tier II gasoline certification fuel

An experimental and numerical study of combustion of a gasoline certification fuel (‘indolene’), and four (S4) and five (S5) component surrogates for it, is reported for the configurations of an isolated droplet burning with near spherical symmetry in the standard atmosphere, and a single cylinder engine designed for advanced compression ignition of pre-vaporized fuel. The intent was to compare performance of the surrogate for these different combustion configurations and to assess the broader applicability of the kinetic mechanism and property database for the simulations. A kinetic mechanism comprised of 297 species and 16,797 reactions was used in the simulations that included soot formation and evolution, and accounted for unsteady transport, liquid diffusion inside the droplet, radiative heat transfer, and variable properties. The droplet data showed a clear preference for the S5 surrogate in terms of burning rate. The simulations showed generally very good agreement with measured droplet, flame, and soot shell diameters. Measurements of combustion timing, in-cylinder pressure, and mass-averaged gas temperature were also well predicted with a slight preference for the S5 surrogate. Preferential vaporization was not evidenced from the evolution of droplet diameter but was clearly revealed in simulations of the evolution of mixture fractions inside the droplets. Here, the influence of initial droplet diameter (D o ) on droplet burning was strong, with S5 burning rates decreasing with increasing D o due to increasing radiation losses from the flame. Flame extinction was predicted for D o =3.0 mm as a radiative loss mechanism but not predicted for smaller D o for the conditions of the simulations.

42 ENGINEERING↗
NASA NTRS1995

Brief Communication: Buoyancy-Induced Differences in Soot Morphology

Reduction or elimination of buoyancy in flames affects the dominant mechanisms driving heat transfer, burning rates and flame shape. The absence of buoyancy produces longer residence times for soot formation, clustering and oxidation. In addition, soot pathlines are strongly affected in microgravity. We recently conducted the first experiments comparing soot morphology in normal and reduced-gravity laminar gas jet diffusion flames. Thermophoretic sampling is a relatively new but well-established technique for studying the morphology of soot primaries and aggregates. Although there have been some questions about biasing that may be induced due to sampling, recent analysis by Rosner et al. showed that the sample is not biased when the system under study is operating in the continuum limit. Furthermore, even if the sampling is preferentially biased to larger aggregates, the size-invariant premise of fractal analysis should produce a correct fractal dimension.

Ku, Jerry C.↗
DOE OSTI2022

Combustion characteristics and detailed simulations of surrogates for a Tier II gasoline certification fuel

An experimental and numerical study of combustion of a gasoline certification fuel (‘indolene’), and four (S4) and five (S5) component surrogates for it, is reported for the configurations of an isolated droplet burning with near spherical symmetry in the standard atmosphere, and a single cylinder engine designed for advanced compression ignition of pre-vaporized fuel. The intent was to compare performance of the surrogate for these different combustion configurations and to assess the broader applicability of the kinetic mechanism and property database for the simulations. A kinetic mechanism comprised of 297 species and 16797 reactions was used in the simulations that included soot chemistry and accounted for unsteady transport, liquid diffusion inside the droplet, radiative heat transfer, and variable properties. The droplet data showed a clear preference for the S5 surrogate in terms of burning rate. The simulations showed generally very good agreement with measured droplet, flame, and soot shell diameters. Measurements of combustion timing, in-cylinder pressure, and mass-averaged gas temperature were also well predicted with a slight preference for the S5 surrogate. Preferential vaporization was not evidenced from the evolution of droplet diameter but was clearly revealed in simulations of the evolution of mixture fractions inside the droplets. The influence of initial droplet diameter (Do) on droplet burning was strong, with S5 burning rates decreasing with increasing Do due to increasing radiation losses from the flame. Flame extinction was predicted for Do =3.0 mm as a radiative loss mechanism but not predicted for smaller Do for the conditions of the simulations.

Guo, Songtao↗
DOE OSTI2025

Influence of gradation on shear behavior and pore water response of sand

Here, this paper examines the influence of particle size distribution (PSD) on the shearing behavior of sand using axisymmetric triaxial compression (ATC) testing in conjunction with 3D imaging using synchrotron micro-computed tomography (SMT). Angular sand was sieved to obtain a narrow gradation (uniform) and a wide gradation (non-uniform) with uniformity coefficients (C u ) of 1.2 and 3.0, respectively. Experiments were conducted under drained conditions and a constant effective cell pressure (σ$^{'}_3$) of 50 kPa at low and high back pressures (BP). Results of paired ATC-SMT were analyzed in terms of global constitutive behavior, strain localization, and localized flow characteristics. A new particle tracking algorithm is developed to expose strain localization. Relative particle translation gradient (RPTG) results revealed that gradation affects how early the shear band develops and a tendency for narrow gradation to exhibit varying degrees of diffused shear band at high axial strain (ε 1 ) even though a clear single shear band was observed at the peak strength. Geometric tortuosity (τ) is used as a quantitative parameter to assess flow changes and the efficiency of the flow path. Representative elementary volumes (REVs) inside and outside the shear band were analyzed and the results showed a variation in flow path characteristics where wide gradation specimens had preferential flow paths.

Computed tomography↗
DOE OSTI2025

Structural properties and recrystallization effects in ion beam modified B20-type FeGe films

Disordered iron germanium (FeGe) has recently garnered interest as a testbed for a variety of magnetic phenomena as well as for use in magnetic memory and logic applications. This is partially owing to its ability to host skyrmions and antiskyrmions—nanoscale whirlpools of magnetic moments that could serve as information carriers in spintronic devices. In particular, a tunable skyrmion–antiskyrmion system may be created through precise control of the defect landscape in B20-phase FeGe, motivating the development of methods to systematically tune disorder in this material and understand the ensuing structural properties. To this end, we investigate a route for modifying magnetic properties in FeGe. In particular, we irradiate epitaxial B20-phase FeGe films with 2.8 MeV Au 4+ ions, which creates a dispersion of amorphized regions that may preferentially host antiskyrmions at densities controlled by the irradiation fluence. To further tune the disorder landscape, we conduct a systematic electron diffraction study with in situ annealing, demonstrating the ability to recrystallize controllable fractions of the material at temperatures ranging from ~150 to 250°C. Finally, we describe the crystallization kinetics using the Johnson–Mehl–Avrami–Kolmogorov model, finding that the growth of crystalline grains is consistent with diffusion-controlled one-to-two dimensional growth with a decreasing nucleation rate.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Endotaxial growth of CoSi2 within (111) oriented Si in a molecular beam epitaxy system

A new mode of growth is reported in which buried metallic layers can be fabricated within a single-crystal semiconductor through preferential subsurface growth on previously-grown 'seed' regions. The deposition of Co at 800 C at a rate of 0.01 nm/s on (111) Si substrates containing buried CoSi2 columns 40-100 nm below the Si surface results in the growth and coalescence of these subsurface columns. The formation of a CoSi2 layer on the Si surface is suppressed by this growth mode. It is proposed that the high diffusion rate of Co at 800 C, coupled with the high growth rate of CoSi2 at the subsurface columns, is responsible for this preferred 'endotaxial' growth mode. This growth technique was used to produce a continuous buried single-crystal layer of CoSi2 under a single-crystal Si capping layer.

George, T.↗