Search NASA⌕ Search

SEARCH · Search NASA

Results for “process structure property relations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

A Novel Microcharacterization Technique in the Measurement of Strain and Orientation Gradient in Advanced Materials

Representation of morphology and evolution of the microstructure during processing and their relation to properties requires proper experimental techniques. Residual strains, lattice distortion, and texture (micro-texture) at the interface and the matrix of a layered structure or a functionally gradient material and their variation are among parameters important in materials characterization but hard to measure with present experimental techniques. Current techniques available to measure changes in interred material parameters (residual stress, micro-texture, microplasticity) produce results which are either qualitative or unreliable. This problem becomes even more complicated in the case of a temperature variation. These parameters affect many of the mechanical properties of advanced materials including stress-strain relation, ductility, creep, and fatigue. A review of some novel experimental techniques using recent advances in electron microscopy is presented here to measure internal stress, (micro)texture, interracial strength and (sub)grain formation and realignment. Two of these techniques are combined in the chamber of an Environmental Scanning Electron Microscope to measure strain and orientation gradients in advanced materials. These techniques which include Backscattered Kikuchi Diffractometry (BKD) and Microscopic Strain Field Analysis are used to characterize metallic and intermetallic matrix composites and superplastic materials. These techniques are compared with the more conventional x-ray diffraction and indentation techniques.

Garmestai, H.↗

Large-area SiC membrane produced by plasma enhanced chemical vapor deposition at relatively high temperature

Advances in the growth of silicon carbide (SiC) thin films with outstanding thermal and mechanical properties have received considerable attention. However, the fabrication of large-area free-standing SiC membrane still remains a challenge. Here, the authors report a plasma enhanced chemical vapor deposition process at a relatively high temperature to improve the free-standing SiC membrane area. A systematic study on the microstructural, mechanical, and optical properties of hydrogenated polycrystalline silicon carbide (poly-SiC{sub x}:H) thin films deposited at 600 °C with different annealing temperatures has been performed. In the as-deposited state, SiC{sub x}:H thin films show a polycrystalline structure. The crystallinity degree can be further improved with the increase of the postdeposition annealing temperature. The resulting process produced free-standing 2-μm-thick SiC membranes up to 70 mm in diameter with root mean square roughness of 3.384 nm and optical transparency of about 70% at 632.8 nm wavelength. The large-area SiC membranes made out of poly-SiC{sub x}:H thin films deposited at a relatively high temperature can be beneficial for a wide variety of applications, such as x-ray diffractive optical elements, optical and mechanical filtering, lithography mask, lightweight space telescopes, etc.

36 MATERIALS SCIENCE↗

In-situ tube burst testing and high-temperature deformation behavior of candidate materials for accident tolerant fuel cladding

The high resistance of cladding to plastic deformation and burst failure is one of the most essential properties of accident tolerant fuel (ATF) for maintaining structural integrity during a loss-of-coolant accident (LOCA) since the deformation and burst behavior governs the cooling efficiency of flow channels and process of fission product release. To simulate and evaluate such deformation and burst process of thin-walled cladding, an in-situ testing and evaluation method has been developed on the basis of visual imaging and image analysis techniques. The method uses a specialized optics system consisted of a high-resolution video camera, light filtering unit, and monochromatic light sources, and the in-situ testing is performed using a 50 mm long pressurized thin-walled tubular specimen set in a programmable furnace. In this study eleven (11) candidate cladding materials for ATF, i.e., 6 FeCrAl alloys and 5 nanostructured steels, were tested using the newly developed method, and the time-dependent images were analyzed to produce detailed deformation and burst data such as true hoop stress, strain (creep) rate, and failure stress. Relatively soft FeCrAl alloys deformed and burst below 800°C while negligible strain rates were measured for higher strength alloys and/or for relatively thick wall specimens.

Gussev, Maxim N.↗

Stress localization investigation of additively manufactured GRCop-42 thin-wall structure

A full-field crystal plasticity (CP) framework is presented for the GRCop-42 alloy to study microscopic mechanical behavior and local stress heterogeneities. The microstructures of additively manufactured (AM) materials are often unique relative to conventionally processed materials, and the local thermal histories drive these differences during the build process. These thermal histories depend on the process parameters (laser power, scan speed, and scan strategy) and the part geometry. Prior research has shown that the mechanical properties of thin-walled structures can vary significantly with wall thickness due to changes in the thermal boundary conditions during manufacturing. It is, therefore, desirable to perform CP simulations based on the phenomenological constitutive model to predict the local mechanical responses induced by microstructural heterogeneities. This work generates representative microstructures based on experimentally collected grain information (i.e., texture) for grain scale stress analysis, and the material constitutive parameters are calibrated using the experimental mechanical testing data. Here, we specifically investigated the effect of crystallographic texture and grain morphologies on the size-dependent mechanical properties of AM GRCop-42. The selection of appropriate material properties for implementing an effective free surface boundary condition and the influence of adjacent buffer layers are also discussed. Analysis of local field results reveals a strong correlation between stress localization and the initial grain orientation. However, no significant relationship between the misorientation of the individual adjacent grains and the average misorientation is observed.

36 MATERIALS SCIENCE↗

Interactions of SO 2 -Containing Acid Gases with ZIF-8: Structural Changes and Mechanistic Investigations

Zeolitic imidazolate frameworks (ZIFs) are a set of nanoporous metal–organic frameworks (MOFs) with tunable porosity and functionality. Among MOFs, they also show relatively good stability with respect to temperature and humidity. These characteristics lead to their possible applications in separation processes. In many practical separation processes, adsorbents are exposed to a variety of molecular species including acid gases. However, there is little knowledge of the effects of such acid gas exposure on the adsorption and separation properties of ZIFs. Here, the stability of a model ZIF material (ZIF-8) under SO 2 exposure in dry, humid, and aqueous environments has been investigated in detail. Combined characterization by several techniques (PXRD, N 2 physisorption, EDX, XPS, and FTIR) allowed us to track the structural and compositional properties of ZIF-8 before and after SO 2 exposure. We found ZIF-8 is stable after prolonged exposure in dry SO 2 and in humid air without SO 2 . However, exposure to 10–20 ppm concentrations of SO 2 in the presence of high relative humidity led to its irreversible structural degradation over time as evidenced by substantial losses in crystallinity and textural properties. Exposure to similar concentrations of aqueous SO 2 did not lead to bulk degradation. Humid SO 2 exposed ZIF-8 showed a significant presence of sulfur (S) even after reactivation, with vibrational characteristics corresponding to (bi)sulfite and (bi)sulfate groups. A mechanism of ZIF-8 degradation combining the synergistic effects of SO 2 and humidity is proposed. Attack by sulfuric and sulfurous acid species (generated in humid SO 2 ) leads to protonation of nitrogen in the imidazole ring, resulting in cleavage of metal–linker (Zn–N) bonds. Our detailed experimental findings serve as a starting point for developing a generalized mechanism of acid gas interactions with ZIF materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room-temperature fabrication of a delafossite CuCrO 2 hole transport layer for perovskite solar cells

Delafossite oxides are promising hole transport layer (HTL) candidates for perovskite solar cells, due to their wide band gap, favorable energy band alignment relative to the perovskite absorber and simplicity of processing. In this paper, we investigate the properties of CuCrO2 (CCO) delafossite films using an integration of experimental and computational techniques. Phase-pure CCO films are deposited at room temperature by spin-casting suspensions of hydrothermally-synthesized nanoparticles, for use in a glass/ITO/CCO/CH3NH3PbI3/C60/BCP/Ag device structure. Although density functional theory (DFT) calculations predict an elevated hole effective mass along certain crystallographic directions, the nearly isotropic shape and small size of the CCO nanoparticles preserves transport properties within the films by randomizing particle orientation, preventing these unfavorable directions from dominating the film conductivity. Experimental measurements confirm that the CCO films display appropriate optical and electrical properties for use as an HTL, in good agreement with the DFT calculations. Solar cells made using these films exhibit stabilized power conversion efficiencies exceeding 14%, with only minor hysteresis in the current–voltage characteristics.

Dunlap-Shohl, Wiley A.↗

Molecular Dynamics Investigation of the Structural and Mechanical Properties of Off-Stoichiometric Epoxy Resins

Molecular dynamic (MD) simulations were performed to compute the mechanical properties of off-stoichiometric epoxy resins as a function of hardener/epoxy mixture ratio (r). Properties were characterized in relation to their microscopic structures. Such resins have been used recently for adhesive-free bonding of large-scale composite structures using the co-curing-ply method. In this process, two partially precured composite panels with hardener-poor (HP) off-stoichiometric resins are coupled with ply(ies) of complementary hardener-rich (HR) formulations and then cured simultaneously. This bonding process has the potential to produce reliable and certifiable composite joints without the need for additional fasteners, which are often required for many conventional bonding methods because even small amounts of contamination can cause a weak bond. The reflow and mixing of the HP/HR resin in this bonding process result in a joint with no discernable interface that should not be susceptible to surface contamination. However, incomplete mixing of the two offset resins may result in chemical heterogeneity of the cured polymeric joint. Thus, different r values may be obtained across the joint. Classical MD simulations were performed to compute the Young’s modulus of polymers with different r values and correlate their properties to network structures. High stiffness was associated with molecular packing due to chemical crosslinking, leading to a single network structure. Moreover, the networks became denser as the ratio approached the stoichiometric value r = 1. Thus, the r = 1 systems were single clusters, with high stiffness, high molecular weight, and a high degree of crosslinking. Structural properties such as radius of gyration and mean square displacement were determined to investigate the variation in the stiffness with respect to r. This MD simulation study was validated with experimental measurements.

Chang Woon Jang↗

Neutron diffraction: a primer

Because of the neutron’s special properties, neutron diffraction may be considered one of the most powerful techniques for structure determination of crystalline and related matter. Neutrons can be released from nuclear fission, from spallation processes, and also from low-energy nuclear reactions, and they can then be used in powder, time-of-flight, texture, single crystal, and other techniques, all of which are perfectly suited to clarify crystal and magnetic structures. With high neutron flux and sufficient brilliance, neutron diffraction also excels for diffuse scattering, for in situ and operando studies as well as for high-pressure experiments of today’s materials. For these, the wave-like neutron’s infinite advantage (isotope specific, magnetic) is crucial to answering important scientific questions, for example, on the structure and dynamics of light atoms in energy conversion and storage materials, magnetic matter, or protein structures. In this primer, we summarize the current state of neutron diffraction (and how it came to be), but also look at recent advances and new ideas, e.g., the design of new instruments, and what follows from that.

36 MATERIALS SCIENCE↗

Quantitative multi-image analysis in metals research

Abstract Quantitative multi-image analysis (QMA) is the systematic extraction of new information and insight through the simultaneous analysis of multiple, related images. We present examples illustrating the potential for QMA to advance materials research in multi-image characterization, automatic feature identification, and discovery of novel processing-structure–property relationships. We conclude by discussing opportunities and challenges for continued advancement of QMA, including instrumentation development, uncertainty quantification, and automatic parsing of literature data. Graphical abstract

36 MATERIALS SCIENCE↗

Large-Scale Synthesis of Semiconducting Cu(In,Ga)Se2 Nanoparticles for Screen Printing Application

During the last few decades, the interest over chalcopyrite and related photovoltaics has been growing due the outstanding structural and electrical properties of the thin-film Cu(In,Ga)Se2 photoabsorber. More recently, thin film deposition through solution processing has gained increasing attention from the industry, due to the potential low-cost and high-throughput production. To this end, the elimination of the selenization procedure in the synthesis of Cu(In,Ga)Se2 nanoparticles with following dispersion into ink formulations for printing/coating deposition processes are of high relevance. However, most of the reported syntheses procedures give access to tetragonal chalcopyrite Cu(In,Ga)Se2 nanoparticles, whereas methods to obtain other structures are scarce. Herein, we report a large-scale synthesis of high-quality Cu(In,Ga)Se2 nanoparticles with wurtzite hexagonal structure, with sizes of 10–70 nm, wide absorption in visible to near-infrared regions, and [Cu]/[In + Ga] ≈ 0.8 and [Ga]/[Ga + In] ≈ 0.3 metal ratios. The inclusion of the synthesized NPs into a water-based ink formulation for screen printing deposition results in thin films with homogenous thickness of ≈4.5 µm, paving the way towards environmentally friendly roll-to-roll production of photovoltaic systems.

36 MATERIALS SCIENCE↗

Information about Practicums at Los Alamos

The Los Alamos Neutron Science Center is the premier facility for neutron science experiments ranging from cross section measurements, neutron scattering experiments, proton radiography, cold neutrons, actinide neutronic properties, and many other exciting topics. The National High Magnetic Field Laboratory is home to several powerful magnets, including the one that created the first non-destructive 100 Tesla field in March 2012. They probe the electronic structure of superconductors, magnetic properties of materials (including magneto-quantum effects). Research is also conducted in correlated materials, thermoacoustics, and magnetic properties of actinides. The Trident Laser has a unique niche with very high power, short pulse experiments, with a peak power of 10{sup 20} W in short pulse mode. Discoveries range from production of monoenergetic MeV ion beam, nonlinear kinetic plasma waves, the transition between kinetic and fluid nonlinear behavior and other laser-plasma interaction processes.

36 MATERIALS SCIENCE↗

High temperature breakdown of the Stokes-Einstein relation in a computer simulated Cu-Zr melt

Transport properties and the Stokes-Einstein (SE) relation in liquid Cu{sub 8}Zr{sub 3} are studied by molecular dynamics simulation with a modified embedded atom potential. The critical temperature T{sub c} of mode coupling theory (MCT) is derived as 930 K from the self-diffusion coefficient D and viscosity η. The SE relation breaks down around T{sub SE} = 1900 K, which is far above T{sub c}. At temperatures below T{sub SE}, the product of D and η fluctuates around a constant value, similar to the prediction of MCT near T{sub c}. The influence of the microscopic atomic motion on macroscopic properties is investigated by analyzing the time dependent liquid structure and the self-hole filling process. The self-holes for the two components are preferentially filled by atoms of the same component. The self-hole filling dynamics explains the different breakdown behaviors of the SE relation in Zr-rich liquid CuZr{sub 2} compared to Cu-rich Cu{sub 8}Zr{sub 3}. At T{sub SE}, a kink is found in the temperature dependence of both partial and total coordination numbers for the three atomic pair combinations and of the typical time of self-hole filling. This indicates a strong correlation between liquid structure, atomic dynamics, and the breakdown of SE relation. The previously suggested usefulness of the parameter d(D{sub 1}/D{sub 2})/dT to predict T{sub SE} is confirmed. Additionally we propose a viscosity criterion to predict T{sub SE} in the absence of diffusion data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Study of the 3 He and Neutron Spin Structure at Low Q 2 and The Upgrade of the JLab Polarized 3 He Target

In the scattering process off a nuclear or nucleon target, the Gerasimov-Drell-Hearn (GDH) sum rule for real photons (Q 2 =0 where Q 2 &equiv; -q 2 with q the photon's 4-momentum) relates static properties of the target particle's ground state to dynamic properties of all its excited states. On the other side of the Q 2 spectrum, the Bjorken sum rule holds in the Bjorken limit Q 2 &rarr; &infin;. Bjorken sum rule relates the final structure functions of the proton and neutron to the nucleon axial coupling constant in weak decay. These two sum rules belong to domains where calculations are achievable but use different degrees of freedom: hadronic degrees of freedom at low Q 2 versus partonic degrees of freedom at intermediate Q 2 . Meanwhile, different methods have been used to connect the two sum rules at finite Q 2 values: Chiral Perturbation Theory is used to expand the GDH sum rule while Operator Product Expansion is used to expand the Bjorken sum rule. In recent decades, improvements in polarized beam and polarized target techniques have made it possible to test theoretical predictions in the intermediate Q 2 region. During the Jefferson Lab (JLab) Hall A E97110 experiment, a precise measurement of polarized cross sections was performed at 0.02 < Q 2 < 0.3 GeV 2 using a polarized 3 He target as an effective polarized neutron target. The measured data allowed us to test predictions of Chiral Perturbation Theory at very low Q 2 . Furthermore, an extrapolation to the real photon point Q 2 =0 tests the GDH sum rule on the neutron. In order to reach the small angles necessary for the low Q 2 range, a new septum magnet was installed in Hall A for this experiment. Unfortunately, the magnet was mis-wired during initial running. There were therefore two periods for this experiment: the first period had the defective magnet due to mis-wiring; while in the second period, the magnet had been fixed and was working properly. The cross sections and the asymmetries for the first period must be extracted using a difficult and unusual method employing focal plane variables in the spectrometer. In the work described in this thesis, the target-plane and focal-plane method will be established first and confirmed by elastic scattering cross section measurements from carbon foil and 3 He targets. Cross sections and asymmetries of inelastic scattering were then extracted using the same method, which constitute the main physics results of this thesis. Preliminary results on ITT , the integral of the polarized cross section, were also extracted and are presented in this thesis. In addition to the data analysis of E97110, this thesis includes instrumentation work performed on the polarized 3 He target at JLab. For the 12 GeV program of JLab, the polarized 3 He target is being upgraded to satisfy new experimental requirements. The new target is a convection-based cell with two transfer tubes rather than a single transfer tube as in the former 6 GeV design. The first stage of the target upgrade aims to produce a 40 cm long, 10 amg target that can withstand 30 &mu;A of electron beam current with an in-beam polarization of 55%, doubling the figure-of-merit from the 6 GeV time. Several studies were conducted at the Test Lab of JLab on the new convection cell. Work and improvement done on the Pulse Nuclear Magnetic Resonance (NMR) polarimetry and its test results will be presented. As this thesis is written, the target is being installed in Hall C of JLab in preparation for a 6-month long running from November 2019 to May 2020.

Ton, Nguyen↗

Synthesis and characterization of metastable, 20 nm-sized Pna2{sub 1}-LiCoPO{sub 4} nanospheres

The majority of research activities on LiCoPO{sub 4} are focused on the phospho-olivine (space group Pnma), which is a promising high-voltage cathode material for Li-ion batteries. In contrast, comparably little is known about its metastable Pna2{sub 1} modification. Herein, we present a comprehensive study on the structure–property relationships of 15–20 nm Pna2{sub 1}-LiCoPO{sub 4} nanospheres prepared by a simple microwave-assisted solvothermal process. Unlike previous reports, the results indicate that the compound is non-stoichiometric and shows cation-mixing with Co ions on the Li sites, which provides an explanation for the poor electrochemical performance. Co L{sub 2,3}-edge X-ray absorption spectroscopic data confirm the local tetrahedral symmetry of Co{sup 2+}. Comprehensive studies on the thermal stability using thermogravimetric analysis, differential scanning calorimetry, and in situ powder X-ray diffraction show an exothermic phase transition to olivine Pnma-LiCoPO{sub 4} at 527 °C. The influence of the atmosphere and the particle size on the thermal stability is also investigated. - Graphical abstract: Blue nano-sized Pna2{sub 1}-LiCoPO{sub 4,} featuring tetrahedrally-coordinated Co{sup 2+}, was synthesized in a rapid one-step microwave-assisted solvothermal process. The phase relation between this metastable and the stable polymorph was analyzed and electrochemical properties are discussed. - Highlights: • Preparation of uniform 15–20 nm nanospheres of metastable Pna2{sub 1}-LiCoPO{sub 4} polymorph. • Structure redetermination shows cation-mixing (Co blocking Li sites). • In situ investigation of phase transformation to olivine Pnma-LiCoPO{sub 4} at 527 °C. • Pna2{sub 1}-LiCoPO{sub 4} reemerges as a stable high-temperature phase above 800 °C. • X-ray absorption spectroscopy confirms local tetrahedral symmetry (T{sub d} Co{sup 2+}).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Process-dependent anisotropic thermal conductivity of laser powder bed fusion AlSi10Mg: impact of microstructure and aluminum-silicon interfaces

Purpose AlSi10Mg alloy is commonly used in laser powder bed fusion due to its printability, relatively high thermal conductivity, low density and good mechanical properties. However, the thermal conductivity of as-built materials as a function of processing (energy density, laser power, laser scanning speed, support structure) and build orientation, are not well explored in the literature. This study aims to elucidate the relationship between processing, microstructure, and thermal conductivity. Design/methodology/approach The thermal conductivity of laser powder bed fusion (L-PBF) AlSi10Mg samples are investigated by the flash diffusivity and frequency domain thermoreflectance (FDTR) techniques. Thermal conductivities are linked to the microstructure of L-PBF AlSi10Mg, which changes with processing conditions. The through-plane exceeded the in-plane thermal conductivity for all energy densities. A co-located thermal conductivity map by frequency domain thermoreflectance (FDTR) and crystallographic grain orientation map by electron backscattered diffraction (EBSD) was used to investigate the effect of microstructure on thermal conductivity. Findings The highest through-plane thermal conductivity (136 ± 2 W/m-K) was achieved at 59 J/mm 3 and exceeded the values reported previously. The in-plane thermal conductivity peaked at 117 ± 2 W/m-K at 50 J/mm 3 . The trend of thermal conductivity reducing with energy density at similar porosity was primarily due to the reduced grain size producing more Al-Si interfaces that pose thermal resistance. At these interfaces, thermal energy must convert from electrons in the aluminum to phonons in the silicon. The co-located thermal conductivity and crystallographic grain orientation maps confirmed that larger colonies of columnar grains have higher thermal conductivity compared to smaller columnar grains. Practical implications The thermal properties of AlSi10Mg are crucial to heat transfer applications including additively manufactured heatsinks, cold plates, vapor chambers, heat pipes, enclosures and heat exchangers. Additionally, thermal-based nondestructive testing methods require these properties for applications such as defect detection and simulation of L-PBF processes. Industrial standards for L-PBF processes and components can use the data for thermal applications. Originality/value To the best of the authors’ knowledge, this paper is the first to make coupled thermal conductivity maps that were matched to microstructure for L-PBF AlSi10Mg aluminum alloy. This was achieved by a unique in-house thermal conductivity mapping setup and relating the data to local SEM EBSD maps. This provides the first conclusive proof that larger grain sizes can achieve higher thermal conductivity for this processing method and material system. This study also shows that control of the solidification can result in higher thermal conductivity. It was also the first to find that the build substrate (with or without support) has a large effect on thermal conductivity.

Engineering↗

Integrating computation and experiment to investigate photoelectrodes for solar water splitting at the microscopic scale.

CONSPECTUS: Photoelectrochemical water-splitting is a promising and sustainable way to store the energy of the sun in chemical bonds and use it to produce hydrogen gas, a clean fuel. The key components in photoelectrochemical cells (PECs) are photoelectrodes, including a photocathode that reduces water to hydrogen gas and a photoanode that oxidizes water to oxygen gas. Materials used in photoelectrodes for PECs must effectively absorb sunlight, yield photogenerated carriers, and exhibit electronic properties that enable the efficient shuttling of carriers to the surface to participate in relevant water-splitting reactions. Discovering and understanding the key characteristics of optimal photoelectrode materials is paramount to the realization of PEC technologies. Oxide-based photoelectrodes can satisfy many of these materials requirements, including stability in aqueous environments, band edges with reasonable alignment with the redox potentials for water splitting, and ease of synthesis. However, oxide photoelectrodes generally suffer from poor charge transport properties and considerable bulk electron-hole separation, and they have relatively large band gaps. Numerous strategies have been proposed to improve these aspects and understand how these improvements are reflected in the photoelectrochemical performance. Unfortunately, the structural and compositional complexity of multinary oxides accompanied by the inherent complexity of photoelectrochemical processes makes it challenging to understand the individual effects of composition, structure, and defects in the bulk and on the surface on a material's photoelectrochemical properties. The integration of experiment and theory has great potential to increase our atomic-level understanding of structure-composition-property relationships in oxide photoelectrodes. In this Account, we describe how integrating experiment and theory is beneficial for achieving scientific insights at the microscopic scale. We highlight studies focused on understanding the role of (i) bulk composition via solid-state solutions, intercalation, and comparison with isoelectronic compounds, (ii) dopants for both the anion and cation and their interactions with oxygen vacancies, and (iii) surface/interface structure in the photocurrent generation and photoelectrochemical performance in oxide photoelectrodes. In each instance, we outline strategies and considerations for integrating experiment and theory and describe how this integration led to valuable insights and new directions in uncovering structure-composition-property relationships. Our aim is to demonstrate the unique value of combining experiment and theory in studying photoelectrodes and to encourage the continued effort to bring experiment and theory in closer step with each other.

Wang, Wennie↗

Modeling-Driven Damage Tolerant Design of Graphene Nanoplatelet/Carbon Fiber/Epoxy Hybrid Composite Panels for Full-Scale Aerospace Structures

The objective of this study is to design a new nano graphenecarbon fiberpolymer hybrid composite that can be used for the NASA SLS Composite Exploration Upper Stage (CEUS) forward skirt structure. The new material will improve the resistance to open-hole compression failure of the structure relative to traditional polymer fiber composites. The material is designed rapidly and with little cost using the Integrated Computational Materials Engineering (ICME) approach. Multiscale modeling and experiments are used to synergistically optimize the material design to yield improved properties and performance by controlling key processing parameters for manufacturing nano-enhanced materials. Specifically, the nanocomposite panel showed a 22 reduction in mass relative to the traditional composite panel, while both designs are equal in terms of ease of manufacture. This potential mass savings corresponds to an estimated 45 savings in materials and manufacturing costs. The multiscale ICME workflow developed for this project can be readily applied to the development of nano-enhanced composite materials and large aerospace structures. In addition, all key aspects of ICME were employed to complete this project including multiscale modeling, experimental characterization and visualization, data management, visualization, error and uncertainty quantification, and education. The results presented herein indicate a dramatic level of success, as well as the power and potential of ICME approach and multiscale modeling for composite materials.

computational mechanics↗

Improved Accident Tolerance of Austenitic Stainless Steel Cladding through Colossal Supersaturation with Interstitial Solutes

We proposed a program-supporting research project in the area of fuel-cycle R&D, specifically on the topic of advanced fuels. Our goal was to investigate whether SECIS (surface engineering by concentrated interstitial solute – carbon, nitrogen) can improve the properties of austenitic stainless steels and related structural alloys such that they can be used for nuclear fuel cladding in LWRs (light-water reactors) and significantly excel currently used alloys with regard to performance, safety, service life, and accident tolerance. We intended to demonstrate that SECIS can be adapted for post-processing of clad tubing to significantly enhance mechanical properties (hardness, wear resistance, and fatigue life), corrosion resistance, resistance to stress–corrosion cracking (hydrogen-induced embrittlement), and – potentially – radiation resistance (against electron-, neutron-, or ion-radiation damage). To test this hypothesis, we measured various relevant properties of the surface-engineered alloys and compared them with corresponding properties of the non–treated, as-received alloys. In particular, we studied the impact of heat exposure corresponding to BWR (boiling-water reactor) working and accident (loss-of-coolant) conditions and the effect of ion irradiation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗