Thermal expansion anisotropy of oxides and oxide solid solutions.
Thermal expansion properties of oxides and oxide solid solutions measured for improved expansion coefficient search
Kirchner, H. P.↗
SEARCH · Search NASA
Results for “properties of solids”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Adhesion Performance of Solid Film Lubricants on Substrates Cleaned With Environmentally Compliant Cleaners
Solid film adhesion testing was used to determine the effect different environmentally compliant cleaners have on the adhesion properties of solid film lubricants used for several NASA programs. In an action to remove ozone depleting chemicals from aerospace processes, a replacement cleaner must be identified that does not affect the adhesion of solid film lubricants used on flight critical NASA hardware. ASTM D251083 Standard Test Method for Adhesion of Solid Film Lubricants was used to evaluate the cleaners. Two different lubricants - Inlox 88 and Boosterlube - were tested using various commercially available cleaners. Inlox 88 is produced by E/M Corporation and is a liquid oxygen compatible lubricant used in the Space Shuttle Main Engine, and Boosterlube is a new lubricant being implemented for use on the Space Shuttle Solid Rocket Booster. These lubricants were selected because of their specific use on flight critical NASA components. Results of this testing are presented in the paper.
Hall, P. B.↗
Noise spectrum properties of low-noise microwave tube and solid-state signal sources
Noise spectrum properties of low noise microwave tube and solid state signal sources
MICROWAVE TUBE↗
Status of the 260-inch diameter solid rocket motor program.
Third 260-inch diameter solid propellant rocket engine test firing
NOZZLE GEOMETRY↗
Advanced thermal/environmental barrier coatings of high-entropy rare earth disilicates tuned by strong anharmonicity of Eu 2 Si 2 O 7
Advancing thermal/environmental barrier coating (TEBC) materials with integrated thermal-mechanical functions is paramount for safeguarding SiC-based ceramic matrix composites (CMCs) in high-efficiency gas turbines. Herein, we employ a synergistic approach, combining density functional theory (DFT) methods and combinatorial chemistry techniques, to design high-performance and low-cost RE 2 Si 2 O 7 (RE = rare earth elements) TEBC materials tailored for enhanced compatibility with SiC-based CMCs. Expanding on phase stability of alloying pure RE 2 Si 2 O 7 , the investigation extends to the mechanical and thermal properties of solid solution systems, including Er 1/2 Y 3/4 Yb 3/4 Si 2 O 7 , Gd 1/4 Er 1/4 Y 3/4 Yb 3/4 Si 2 O 7 , and Eu 1/4 Er 1/4 Y 3/4 Yb 3/4 Si 2 O 7 . The solid solution systems exhibit a major reduction in lattice thermal conductivity relative to their pure counterparts, achieving ultralow values of 0.25 to 0.39 W m −1 K −1 at 1500 K. Furthermore, the coefficients of thermal expansion (CTE) of these solid solutions are precisely tuned within the desired range for SiC (4.4 to 5.5 × 10 −6 K −1 ), while maintaining good mechanical properties. Here, in particular, the addition of Eu 2 Si 2 O 7 demonstrates to be an important variable to the tuning of CTE and lattice thermal conductivity by leveraging its strong anharmonicity, presenting a pioneering avenue for fine-tuning material properties. In summary, this research not only identifies promising TEBC materials with superior thermal properties, but also introduces a valuable computational material design methodology for the rapid discovery of complex materials for harsh environments.
36 MATERIALS SCIENCE↗
Chemical order-disorder nanodomains in Fe 3 Pt bulk alloy
Chemical ordering is a common phenomenon and highly correlated with the properties of solid materials. By means of the redistribution of atoms and chemical bonds, it invokes an effective lattice adjustment and tailors corresponding physical properties. To date, however, directly probing the 3D interfacial interactions of chemical ordering remains a big challenge. In this work, we deciphered the interlaced distribution of nanosized domains with chemical order/disorder in Fe 3 Pt bulk alloy. HAADF-STEM images evidence the existence of such nanodomains. The reverse Monte Carlo method with the X-ray pair distribution function data reveal the 3D distribution of local structures and the tensile effect in the disordered domains at the single-atomic level. The chemical bonding around the domain boundary changes the bonding feature in the disordered side and reduces the local magnetic moment of Fe atoms. This results in a suppressed negative thermal expansion and extended temperature range in Fe 3 Pt bulk alloy with nanodomains. Our study demonstrates a local revelation for the chemical order/disorder nanodomains in bulk alloy. The understanding gained from atomic short-range interactions within the domain boundaries provides useful insights with regard to designing new functional compounds.
36 MATERIALS SCIENCE↗
Strong anharmonicity dictates ultralow thermal conductivities of type-I clathrates
Type-I clathrate solids have attracted significant interest due to their ultralow thermal conductivities and sub- sequent promise for thermoelectric applications, yet the mechanisms underlying these properties are not well understood. Here, we extend the framework of vibrational dynamical mean-field theory (VDMFT) to calculate temperature-dependent thermal transport properties of solids using a many-body Green’s function approach. When applied to a coarse-grained description of 𝑋 8 Ga 16 Ge 30 , where 𝑋= Ba, Sr, we find that nonresonant scattering between cage acoustic modes and rattling modes leads to a reduction of acoustic phonon lifetimes and thus thermal conductivities. Moreover, we find that the moderate temperature dependence of conductivities above 300 K, which is consistent with experimental measurements, cannot be reproduced by textbook perturbation theory calculations, which predict a 𝑇 −1 dependence. Therefore, we suggest that nonperturbative anharmonic effects, including four- and higher-phonon scattering processes, are responsible for the ultralow thermal conductivities of type-I clathrates.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Fundamental equations of a mixture of gas and small spherical solid particles from simple kinetic theory.
The fundamental equations of a mixture of a gas and pseudofluid of small spherical solid particles are derived from the Boltzmann equation of two-fluid theory. The distribution function of the gas molecules is defined in the same manner as in the ordinary kinetic theory of gases, but the distribution function for the solid particles is different from that of the gas molecules, because it is necessary to take into account the different size and physical properties of solid particles. In the proposed simple kinetic theory, two additional parameters are introduced: one is the radius of the spheres and the other is the instantaneous temperature of the solid particles in the distribution of the solid particles. The Boltzmann equation for each species of the mixture is formally written, and the transfer equations of these Boltzmann equations are derived and compared to the well-known fundamental equations of the mixture of a gas and small solid particles from continuum theory. The equations obtained reveal some insight into various terms in the fundamental equations. For instance, the partial pressure of the pseudofluid of solid particles is not negligible if the volume fraction of solid particles is not negligible as in the case of lunar ash flow.
Pai, S. I.↗
ML-based Micro-CT SOFC Microstructure Models (from Kent 2026 Microstructural Augmentation paper)
Overview -------------------------- This repository contains datasets from the manuscript **"Enhanced Generalizability to Deep-Learning Quantification of 3D Microstructural Characteristics through Microstructurally Aware Augmentation of Scarce Data"** (*William F. Kent, Rochan Bajpai, Rachel C. Kurchin, William K. Epting, Harry W. Abernathy, Paul A. Salvador. Submitted 2026*). The methods are also described in the dissertation **Data Intensive Analysis of Solid Oxide Cell Microstructures** (*Doctoral dissertation, Carnegie Mellon University, 2025*). The datasets here are trained convolutional neural network (CNN) models for predicting key microstructural properties of solid oxide cell (SOC) electrodes from low-res, 2-channel 3D images, as well as some helpful code. The parameters for input images are provided in the paper. Sample data is provided in the file `Combined_anode_aug_dual_1k_examples` - that particular data was used to train `anode_all_aug.pth` and will work most accurately with that model. Please familiarize yourself with all caveats on accuracy and applicability, as detailed in the associated paper. Usage -------------------------- The basic usage is as follows, assuming `model_fn` is the path to the .pth file, and `X` is 2-channel input image(s) of the proper dimensions (either one image of shape `[2,12,24,24]`, or a batch of N input images of shape `[N,2,12,24,24]`): from CNN_inferencer import load_model_for_inference model = load_model_for_inference(model_fn) y_predicted = model(X) The model object automatically handles input scaling and output de-scaling based on the way the models were trained - in other words, pass in a 2-channel micro-CT image, and it will output microstructural property values in real units. ## Other model object attributes Note that model has useful attributes other than its forward pass model(X). * `model.output_descaler` - returns the output descaler object. Model does the de-scaling when generating inferences, but you may want to re-use this de-scaler on other values to e.g. compare predictions to ground truth from already-scaled training data. * `model.prop_names` - Gives the property names of the predicted y values, in order. Only exists if there's an output scaler as part of the model object, which there will be in the models provided here. ## Usage with sample data Here is a short script to use with the included sample data. from CNN_inferencer import display_predictions, load_model_for_inference, calculate_mape, parity_plot import h5py import numpy as np model_fn = 'anode_all_aug.pth' data_fn = 'Combined_anode_aug_dual_1k_examples.h5' N_samples = 200 figure_outdir = '.' model = load_model_for_inference(model_fn) with h5py.File(data_fn,'r') as f: XX = f['X'] #These are the 2-channel 3D images yy = f['y'] #These are the ground-truth microstructural properties, but they have been scaled for training - need to de-scale below N = XX.shape[0] #How many images total in the input data file #Run inferences on N_samples random samples from XX. #Run in a batch, much more efficient than one at a time. ii = np.random.choice(N,N_samples,replace=False) ii.sort() y_pred = model(XX[ii]) #Get the original/true (but normalized/scaled) values from the training dataset... #Because they were normalized, they are not in real units yet. So let's also de-scale them using model.output_scaler. y_true = model.output_scaler.transform(yy[ii]) #Let's display actual values for just 5 random ones for i in np.random.choice(N_samples,5,replace=False): display_predictions(y_true[i], y_pred[i], model.prop_names) #Make parity plots for each property (ground truth vs predicted values) #Also label each plot with the mean abs. percent error (MAPE) of the predicted values for i,key in enumerate(model.prop_names): mape = calculate_mape(y_true[:,i], y_pred[:,i]) parity_plot(y_true[:,i], y_pred[:,i], figure_outdir, key, extra_title=f' ({mape:.2f}% MAPE)')
3D microstructure↗
Ab initio investigation of elastic properties of dilute Cu alloys for high-gradient accelerating structures
The elastic properties and solid solution strengthening of several Cu alloys that may be promising for high gradient applications were studied using ab initio calculations based on density functional theory. Specifically, the temperature and solute concentration dependence of elastic properties including bulk and shear moduli, thermal expansion coefficient, and heat capacity of these alloys were calculated. We found that the bulk and shear moduli are linearly dependent on the solute concentration in the dilute regime and change significantly for different Cu alloys. The thermal expansion coefficient and heat capacity are comparatively less sensitive to solute concentrations. Solid solution strengthening is observed to be linearly correlated with the change of lattice parameter of Cu. This work provides an in-depth understanding of the elastic properties of Cu alloys, which is key for predicting their performance at high gradient in normal conducting accelerating structures.
36 MATERIALS SCIENCE↗
Effect of fluroine content, atmosphere, and burnishing technique on the lubricating properties of graphite fluoride
Eight different graphite fluoride compounds with fluorine to carbon ratios varying from x = 0.25 to 1.1 were evaluated as burnished films in order to determine the effect of fluorine content on the solid lubricant properties of graphite fluoride. For comparison, similar experiments were conducted on graphite burnished films. It was found that even a small amount of fluorine in graphite fluoride (CF0.25)n improved the lubricating properties of graphite. However, such factors as burnishing atmosphere, burnishing technique, test atmosphere, and specimen temperature affected the results as much as varying the fluorine to carbon ratio of the compound. Best life was found for films that were machined burnished in moist air and tested in moist air.
Fusaro, R. L.↗
Time dependent mechanical strength of oriented media
Time dependent mechanical strength of fully oriented solids
FRACTURE MECHANICS↗
Laplacian-level meta-generalized gradient approximation for solid and liquid metals
In this work, we derive and motivate a Laplacian-level, orbital-free meta-generalized-gradient approximation (LL-MGGA) for the exchange-correlation energy, targeting accurate ground-state properties of sp and sd metallic condensed matter, in which the density functional for the exchange-correlation energy is only weakly nonlocal due to perfect long-range screening. Our model for the orbital-free kinetic energy density restores the fourth-order gradient expansion for exchange to the r 2 SCAN meta-GGA [Furness et al., J. Phys. Chem. Lett. 11, 8208 (2020)], yielding a LL-MGGA we call OFR2. OFR2 matches the accuracy of SCAN for prediction of common lattice constants and improves the equilibrium properties of alkali metals, transition metals, and intermetallics that were degraded relative to the PBE GGA values by both SCAN and r 2 SCAN. We compare OFR2 to the r 2 SCAN -L LL-MGGA [Mejia-Rodriguez and Trickey, Phys. Rev. B 102, 121109(R) (2020)] and show that OFR2 tends to outperform r 2 SCAN -L for the equilibrium properties of solids, but r 2 SCAN -L much better describes the atomization energies of molecules than OFR2 does. For best accuracy in molecules and nonmetallic condensed matter, we continue to recommend SCAN and r 2 SCAN. Numerical performance is discussed in detail, and our paper provides an outlook to machine learning.
36 MATERIALS SCIENCE↗
FLC Award: Smart Chutes and Sensors
Increasing the production and use of biofuels is a national objective for renewable, cleaner energy. A primary objective of the Department of Energy’s Bioenergy Technologies Office (BETO) Feedstock-Conversion Interface Consortium (FCIC) is to address the operational, safety, throughput, and yield of bio-refineries to revolutionize biomass processing with the goal to make bio-derived fuels cost-competitive with fossil fuels. One of the main hurdles is increasing the operational reliability of the bio-refineries. Bio-refineries convert the biomass, such as corn stover, into ethanol. Corn stover is composed of the non-edible stalks, leaves, cobs, and husks left over from harvesting. This material is known for having poor processing properties for bulk solids handling and transport. These properties, such as moisture content, cause costly system plugging and downtime at bio-refineries which limit biofuel from being cost-competitive with diesel and gasoline fuels.
09 BIOMASS FUELS↗
A review of film boiling at cryogenic temperatures.
Film boiling occurs in the quenching of metals, the chilling of biological species, the regenerative cooling of rockets, and the cooling down of a cryogenic fuel tank. Occasionally film boiling is also found in a nuclear reactor or in a cryomagnet. Aspects of film boiling involving an unconstrained liquid mass are considered, giving attention to the evaporation time, the Leidenfrost temperature, solid-liquid contacts, the thermal properties of the solid, effects of coating or scale, wettability, the metastable condition, and the velocity effect on drops. Developments discussed with regard to pool boiling are related to vertical surfaces, film boiling from horizontal surfaces, film boiling from a horizontal cylinder, film boiling from a sphere, and film boiling of helium. Processes of film boiling in a channel are also analyzed.
Hsu, Y. Y.↗
Understanding slurry formulations to guide solution-processing of solid electrolytes
Scalable processing of thin solid electrolytes is crucial for engineering solid-state batteries with practical energy densities. To leverage existing battery production infrastructure, pathways for solution processing of solid electrolyte films must be investigated. Here, roll-to-roll compatible film preparation of aluminum-doped lithium lanthanum zirconate oxide was studied. Four slurry configurations accounting for different solvent properties and solid loadings were evaluated to investigate the ternary interactions within the dispersions. Rheological and coating stability analyses were carried out on the processed slurries. The analysis and characterization indicated that improved component interactions within the ethanol/toluene system result in homogenized distribution of the particles, binder, and plasticizer, and enable the extraction of free-standing thin films with thicknesses of 20 μm and large area (>15 in. 2 ). The drawbacks and opportunities of several protocols for high temperature sintering of the dried green films were investigated. This study highlights the importance of engineering dispersions during the development of processing protocols for solid electrolytes and provides guidelines for the best practices that can be leveraged for solution processing–based fabrications for a wide range of solid electrolyte materials.
25 ENERGY STORAGE↗
High-Energy Solid-State Lithium Batteries with Organic Cathode Materials (Final Report)
Organic materials made from abundant elements via low-energy processes are emerging as sustainable and low-cost alternatives to transition metal oxides as the electrode materials for high- energy batteries in the wake of supply chain and environmental issues associated with critical materials during the transition to clean energy. Organic insertion materials (OIMs) offer material- level energy comparable to transition metal oxides, but they have durability difficulties owing to dissolving in common liquid electrolytes. Combining ceramic-based solid electrolytes with organic electrode materials is one intriguing solution. The goal of this project is to design and synthesize high-energy OIMs, to understand the chemical dynamics and mechanical properties at the OIM-sulfide interface during electrochemical cycling, and to develop methods for constructing the optimum cathode microstructure, which will lead to improved electrochemical performance. The project team has accomplished the following over the last four years: (a) demonstrating that the mechanical softness of organic electrode materials is uniquely beneficial in suppressing crack formation at the electrode-electrolyte interface during cell operation; (b) understanding the interaction between cathode microstructure and the mechanical properties of individual components; and (c) establishing predictive control of cathode microstructure by tuning the mechanical properties of solid electrolytes and OIMs; (d) determining the chemical combability of sulfide electrolyte with high-energy OIMs and finally (f) laying out a road map toward a specific energy of 500 Wh kg -1 for solid-state lithium batteries. 14 publications resulted from this project.
25 ENERGY STORAGE↗
Paper or Plastic? Multiscale Material Handling Properties of Two Model Municipal Solid Waste Streams
Purpose: Municipal Solid Waste (MSW) is a potentially valuable sustainable feedstock for fuel and chemical production due to its carbon-rich content and low cost. This study aims to assess the material handling properties of paperand plastic-rich MSW feedstocks to mitigate equipment failure and processing downtime. Methods: The material handling properties of crumbled MSW feedstocks were measured using apowder rheometer with mass flow hopper calculations to assess handling performance. Inverse gas chromatography was use to measure the surface energy differences between feedstocks. Electron microscopy and Raman spectroscopy was used to evaluate microscale features that may contribute to material handling differences. Results: Plastic and paper rich feedstocks crumbled to a nominal 2 mm particle size were observed to have similar flow and handling characteristics with reasonable hopper outlets. 2 mm plastic rich crumbles, with their higher bulk density, exhibited superior flow performance. By contrast, 4 mm material required significantly larger hopper outlets, indicating poor flowability. Paper rich and 4 mm plastic rich samples displayed broad particle size distributions, which contributed to particle interlocking, jamming, and other flow issues. Electron microscopy revealed that plastic rich samples were significantly smoother, enhancing their flowability compared to the rougher, paper rich materials. Conclusions: This study establishes critical material handling baselines for processing MSW as a viable feedstock for fuel and chemical production. The findings highlight the importance of optimizing particle size and feedstock composition to improve flowability and handling performance.
09 BIOMASS FUELS↗