Search NASA⌕ Search

SEARCH · Search NASA

Results for “recent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Industrial-era global ocean heat uptake doubles in recent decades

Formal detection and attribution studies have used observations and climate models to identify an anthropogenic warming signature in the upper (0–700 m) ocean1,2,3,4. Recently, as a result of the so-called surface warming hiatus, there has been considerable interest in global ocean heat content (OHC) changes in the deeper ocean, including natural and anthropogenically forced changes identified in observational5,6,7, modelling8,9 and data re-analysis10,11 studies. Here, we examine OHC changes in the context of the Earth’s global energy budget since early in the industrial era (circa 1865–2015) for a range of depths. We rely on OHC change estimates from a diverse collection of measurement systems including data from the nineteenth-century Challenger expedition12, a multi-decadal record of ship-based in situ mostly upper-ocean measurements, the more recent near-global Argo floats profiling to intermediate (2,000 m) depths13, and full-depth repeated transoceanic sections5. We show that the multi-model mean constructed from the current generation of historically forced climate models is consistent with the OHC changes from this diverse collection of observational systems. Overall, our model-based analysis suggests that nearly half of the industrial-era increases in global OHC have occurred in recent decades, with over a third of the accumulated heat occurring below 700 m and steadily rising.

54 ENVIRONMENTAL SCIENCES↗

The influence of recent and future climate change on spring Arctic cyclones

In recent decades, the Arctic has experienced rapid atmospheric warming and sea ice loss, with an ice-free Arctic projected by the end of this century. Cyclones are synoptic weather events that transport heat and moisture into the Arctic, and have complex impacts on sea ice, and the local and global climate. However, the effect of a changing climate on Arctic cyclone behavior remains poorly understood. This study uses high resolution (4 km), regional modeling techniques and downscaled global climate reconstructions and projections to examine how recent and future climatic changes alter cyclone behavior. Results suggest that recent climate change has not yet had an appreciable effect on Arctic cyclone characteristics. However, future sea ice loss and increasing surface temperatures drive large increases in the near-surface temperature gradient, sensible and latent heat fluxes, and convection during cyclones. The future climate can alter cyclone trajectories and increase and prolong intensity with greatly augmented wind speeds, temperatures, and precipitation. Such changes in cyclone characteristics could exacerbate sea ice loss and Arctic warming through positive feedbacks. The increasing extreme nature of these weather events has implications for local ecosystems, communities, and socio-economic activities.

54 ENVIRONMENTAL SCIENCES↗

Recent advances and applications of deep learning methods in materials science

Deep learning (DL) is one of the fastest-growing topics in materials data science, with rapidly emerging applications spanning atomistic, image-based, spectral, and textual data modalities. DL allows analysis of unstructured data and automated identification of features. The recent development of large materials databases has fueled the application of DL methods in atomistic prediction in particular. In contrast, advances in image and spectral data have largely leveraged synthetic data enabled by high-quality forward models as well as by generative unsupervised DL methods. In this article, we present a high-level overview of deep learning methods followed by a detailed discussion of recent developments of deep learning in atomistic simulation, materials imaging, spectral analysis, and natural language processing. For each modality we discuss applications involving both theoretical and experimental data, typical modeling approaches with their strengths and limitations, and relevant publicly available software and datasets. We conclude the review with a discussion of recent cross-cutting work related to uncertainty quantification in this field and a brief perspective on limitations, challenges, and potential growth areas for DL methods in materials science.

36 MATERIALS SCIENCE↗

Optical waveguides in lithium niobate: Recent developments and applications

The state of the art of optical waveguide fabrication in lithium niobate is reviewed, with particular emphasis on new technologies and recent applications. The attention is mainly devoted to recently developed fabrication methods, such as femtosecond laser writing, ion implantation, and smart cut waveguides as well as to the realization of waveguides with tailored functionalities, such as photorefractive or domain engineered structures. More exotic systems, such as reconfigurable and photorefractive soliton waveguides, are also considered. Classical techniques, such as Ti in-diffusion and proton exchange, are cited and briefly reviewed as a reference standpoint to highlight the recent developments. In all cases, the application-oriented point of view is preferred, in order to provide the reader with an up-to date panorama of the vast possibilities offered by lithium niobate to integrated photonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE RECENT STAR FORMATION HISTORY OF NGC 5102

We present Hubble Space Telescope photometry of young stars in NGC 5102, a nearby gas-rich post-starburst S0 galaxy with a bright young stellar nucleus. We use the IAC-pop/MinnIAC algorithm to derive the recent star formation history in three fields in the bulge and disk of NGC 5102. In the disk fields, the recent star formation rate has declined monotonically and is now barely detectable, but a starburst is still in progress in the bulge and has added about 2% to the mass of the bulge over the last 200 Myr. Other studies of star formation in NGC 5102 indicate that about 20% of its stellar mass was added over the past Gyr. If this is correct, then much of the stellar mass of the bulge may have formed over this period. It seems likely that this star formation was fueled by the accretion of a gas-rich system with H I mass of about 2 x 10{sup 9} M {sub sun}, which has now been almost completely converted into stars. The large mass of recently formed stars and the blue colors of the bulge suggest that the current starburst, which is now fading, may have made a significant contribution to building the bulge of NGC 5102.

79 ASTRONOMY AND ASTROPHYSICS↗

THE STELLAR ARCHEOLOGY OF THE M33 DISK: RECENT STAR-FORMING HISTORY AND CONSTRAINTS ON THE TIMING OF AN INTERACTION WITH M31

Images recorded with MegaCam are used to investigate the recent (t {<=} 0.25 Gyr) star-forming history (SFH) of the Local Group Sc galaxy M33. The data sample the entire star-forming disk, as well as areas immediately to the north and south of the galaxy. The properties of the stellar disk change near R{sub GC} = 8 kpc. Within this radius the luminosity function of main-sequence stars indicates that the star formation rate (SFR) has been constant with time during at least the past 250 Myr, while at larger radii the SFR has declined during this same time period. That the recent SFR in the inner disk has been constant suggests that M33 has evolved in isolation for at least the past {approx}0.5 Gyr, thereby providing a constraint on the timing of any recent interaction with M31. The color of the main-sequence ridgeline changes with radius, suggesting a gradient in extinction of size {Delta}A{sub V} /{Delta}R{sub GC} = -0.05 mag kpc{sup -1}. The fractional contribution that young stars make to the total mass of the stellar disk changes with radius, peaking near 8 kpc. Evidence is also presented of systematic spatial variations in the SFH of the disk, such that the SFR during the past 100 Myr in the southern half of the galaxy has been {approx}0.4 dex higher than in the northern half. Finally, structures with sizes spanning many kpc that contain blue objects-presumably main-sequence stars that formed during intermediate epochs-are identified near the disk boundary. It is argued that these are tidal features that were pulled from the main body of M33 and-in some cases-are the fossil remnants of star formation that occurred in an extended disk during intermediate epochs.

79 ASTRONOMY AND ASTROPHYSICS↗

Early-type galaxies at intermediate redshift observed with Hubble space telescope WFC3: perspectives on recent star formation

We present an analysis of the stellar populations of 102 visually selected early-type galaxies (ETGs) with spectroscopic redshifts (0.35 ≲ z ≲ 1.5) from observations in the Early Release Science program with the Wide Field Camera 3 (WFC3) on the Hubble Space Telescope (HST). We fit one- and two-component synthetic stellar models to the ETGs UV-optical-near-IR spectral energy distributions and find that a large fraction (∼40%) are likely to have experienced a minor (f{sub YC} ≲ 10% of stellar mass) burst of recent (t{sub YC} ≲ 1 Gyr) star formation. The measured age and mass fraction of the young stellar populations do not strongly trend with measurements of galaxy morphology. We note that massive (M > 10{sup 10.5} M {sub ☉}) recent star-forming ETGs appear to have larger sizes. Furthermore, high-mass, quiescent ETGs identified with likely companions populate a distinct region in the size-mass parameter space, in comparison with the distribution of massive ETGs with evidence of recent star formation (RSF). We conclude that both mechanisms of quenching star formation in disk-like ETGs and (gas-rich, minor) merger activity contribute to the formation of young stars and the size-mass evolution of intermediate redshift ETGs. The number of ETGs for which we have both HST WFC3 panchromatic (especially UV) imaging and spectroscopically confirmed redshifts is relatively small, therefore, a conclusion about the relative roles of both of these mechanisms remains an open question.

79 ASTRONOMY AND ASTROPHYSICS↗

Stability against {alpha} decay of some recently observed superheavy elements

The probability of {alpha}-particle emission for some recently observed superheavy nuclei (SHN) are investigated. The {alpha}-decay half-lives of SHN are calculated in a quantum tunneling model with density-dependent M3Y (DDM3Y) effective nuclear interaction using theoretical and measured Q{sub {alpha}} values. We determine the density distribution of {alpha} and daughter nuclei from the relativistic mean-field (RMF) theory using FSUGold force, NL3, and TM1 parameter sets. The double-folded nuclear potential is numerically calculated in a more microscopic manner using these density distributions. The estimated values of {alpha}-decay half-lives are in good agreement with the recent data. We compare our results with recently detected {alpha}-decay chains from a new element with atomic number Z=117 reported by the Joint Institute for Nuclear Research, Dubna. Finally, we determine the half-lives of superheavy elements with Z=108-120 and neutron number N=152-190 to explore the long-standing predictions of the existence of an 'island of stability' due to possible spherical proton (Z{approx}114) and neutron (N{approx}184) shell closures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Recent developments in support of the shattered pellet technique for disruption mitigation

The technology for producing, accelerating, and shattering large pellets (before injection into plasmas) for disruption mitigation has been under development at the Oak Ridge National Laboratory for several years, including a system on DIII-D that has been used to provide some significant experimental results. The original proof-of-principle testing was carried out using a pipe gun injector cooled by a cryogenic refrigerator (temperatures ~8 to 20 K) and equipped with a stainless steel tube to produce 16.5 mm pellets composed of either pure D2, pure Ne, or a dual layer with a thin outer shell of D2 and core of Ne. Recently, significant progress has been made in the laboratory using that same pipe gun and a new injector that is an ITER test apparatus cooled with liquid helium. The new injector operates at ~5 to 8 K, which is similar to temperatures expected with cooling provided by the flow of supercritical helium on ITER. An alternative technique for producing/solidifying large pellets directly from a pre-mixed gas has now been successfully tested in the laboratory. Also, two additional pellet sizes have been tested recently (nominal 24.4 and 34.0 mm diameters). With larger pellets, the number of injectors required for ITER disruption mitigation can be reduced, resulting in less cost and a smaller footprint for the hardware. An attractive option is longer pellets, and 24.4 mm pellets with a length/diameter ratio of ~3 have been successfully tested. Since pellet speed is the key parameter in determining the response time of a shattered pellet system to a plasma disruption event, recent tests have concentrated on documenting the speeds with different hardware configurations and operating parameters; speeds of ~100 to 800 m/s have been recorded. The data and results from laboratory testing are presented and discussed.

neon↗

Critical Current Distributions of Recent Bi-2212 Round Wires

Bi 2 Sr 2 CaCu 2 O 8+x (Bi-2212) is the only high-field, high-temperature superconductor (HTS) capable of reaching a critical current density J c (16 T, 4.2 K) of 6500 A·mm –2 in the highly desirable round wire (RW) form. However, state-of-the-art Bi-2212 conductors still have a critical current density (J c ) to depairing current density (J d ) ratio around 20 to 30 times lower than that of state-of-the-art Nb–Ti or REBCO. Previously, we have shown that recent improvements in Bi-2212 RW J c are due to improved connectivity associated with optimization of the heat treatment process, and most recently due to a transition to a finer and more uniform powder manufactured by Engi-Mat. One quantitative measure of connectivity may be the critical current (I c ) distribution, since the local I c in a wire can vary along the length due to variable vortex-microstructure interactions and to factors such as filament shape variations, grain-to-grain connectivity variations and blocking secondary phase distributions. Modeling the experimental V-I transition measured on a low resistance shunt as a complex sum of voltage contributions of individual filament and wire sub-sections allows a numerical extraction of the I c distribution from the d 2 V/dI 2 treatment of the V-I curves. Here we compare ~0.1 m length I c distributions of Bi-2212 RWs with recent state-of-the-art very high-J c Engi-Mat powder and lower J c and older Nexans granulate powder. We do find that the I c spread for Bi-2212 wires is about twice the relative standard of high-J c Nb–Ti well below H irr . We do not yet see any obvious contribution of the Bi-2212 anisotropy to the I c distribution and are rather encouraged that these Bi-2212 round wires show relative I c distributions not too far from high-J c Nb–Ti wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accelerating dark energy models of the universe in anisotropic Bianchi type space-times and recent observations

Motivated by the increasing evidence for the need of a geometry that resembles Bianchi morphology to explain the observed anisotropy in the WMAP data, we have discussed some features of the Bianchi type universes in the presence of a fluid that wields an anisotropic equation of state (EoS) parameter in general relativity. Such models are of great interest in cosmology in favor of constructing more realistic models than FLRW models with maximally symmetric spatial geometry. Additionally, the interest in such models was promoted in recent years due to the debate that going on the analysis and the interpretation of the WMAP [21, 111, 112] data, whether they need a Bianchi type morphology to be explained successfully [7, 103, 118, 117]. The LLC-WMAP data maps show seven axes well aligned with one another and the direction Virgo. For this reason Bianchi models are important in the study of anisotropies. In the present study of Bianchi type-I, II, III, V and VI{sub 0} space-times, we observe that the EoS for dark energy ω is found to be time-dependent and its existing range for derived models is in good agreement with the recent observations of SNe Ia data [50], SNe Ia data with CMBR anisotropy and galaxy clustering statistics [11] and latest combination of cosmological datasets coming from CMB anisotropies, luminosity distances of high redshift type Ia supernovae and galaxy clustering [21, 51]. It has been suggested that the dark energy that explains the observed accelerating expansion of the universe may arise due to the contribution to the vacuum energy of the EoS in a time dependent background. The cosmological constant Λ is found to be a positive decreasing function of time and it approaches to a small positive value at late time (i.e. the present epoch) which is corroborated by results from recent type Ia supernovae observations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Editors’ Choice—Review—Recent Advances in Mixed Potential Sensors

Gas sensors are widely used in environmental monitoring and provide controls especially when working with toxic gases. YSZ based λ-sensors have been utilized in the automobile industry for exhaust gas monitoring for more than 40 years. However, recent regulations on emissions reduction has forced further development of toxic gases monitoring in various applications. Mixed potential sensors with YSZ electrolyte are receiving increased attention due to their higher sensitivity and durability under harsh conditions. This review focuses on recent (past 5 years) developments made on electrode and electrolyte structure along with new sensing electrode materials towards detecting gases such as NO x , NH 3 , H 2 , CO and hydrocarbons (HCs). The theory of mixed potential sensors is discussed along with recent developments in detection of multi-gas mixtures using the output from an array of sensors in a mathematical model. Future directions for mixed potential sensor research, and methodologies to improving sensing characteristics are also outlined

47 OTHER INSTRUMENTATION↗

A Review of Recent and Emerging Machine Learning Applications for Climate Variability and Weather Phenomena

Abstract Climate variability and weather phenomena can cause extremes and pose significant risk to society and ecosystems, making continued advances in our physical understanding of such events of utmost importance for regional and global security. Advances in machine learning (ML) have been leveraged for applications in climate variability and weather, empowering scientists to approach questions using big data in new ways. Growing interest across the scientific community in these areas has motivated coordination between the physical and computer science disciplines to further advance the state of the science and tackle pressing challenges. During a recently held workshop that had participants across academia, private industry, and research laboratories, it became clear that a comprehensive review of recent and emerging ML applications for climate variability and weather phenomena that can cause extremes was needed. This article aims to fulfill this need by discussing recent advances, challenges, and research priorities in the following topics: sources of predictability for modes of climate variability, feature detection, extreme weather and climate prediction and precursors, observation–model integration, downscaling, and bias correction. This article provides a review for domain scientists seeking to incorporate ML into their research. It also provides a review for those with some ML experience seeking to broaden their knowledge of ML applications for climate variability and weather.

54 ENVIRONMENTAL SCIENCES↗

Recent Third Pole's rapid warming accompanies cryospheric melt and water cycle intensification and interactions between monsoon and environment: Multidisciplinary approach with observation, modeling and analysis

The Third Pole (TP) is experiencing rapid warming and is currently in its warmest period in the past 2000 years. This paper reviews the latest development in multi-disciplinary TP research associated with this warming. The rapid warming facilitates intense and broad glacier melt over most of TP, although some glaciers in the northwest are advancing. By heating the atmosphere and reducing snow/ice albedo, aerosols also contribute to the glaciers melting. Glacier melt is accompanied by lake expansion and intensification of the water cycle over the TP. Precipitation has increased over the eastern and northwestern TP. Meanwhile, the TP is greening and most regions are experiencing advancing phenological trends although over the southwest there is a spring phenological delay mainly in response to the recent decline in spring precipitation. Atmospheric and terrestrial thermal and dynamical processes over the TP affect the Asian monsoon at different scales. Recent evidence indicates substantial roles that Meso-scale Convective Systems play in TP's precipitation as well as an association between soil moisture anomalies in TP and the Indian monsoon. Moreover, an increase in geo-hazard events has been associated with recent environmental changes, some of which have had catastrophic consequences caused by glacial lake outbursts and landslides. Active debris flows are growing in both frequency of occurrences and spatial scale. Meanwhile, new types of disasters, such as the twin ice avalanches in Ali in 2016, are now appearing in the region. Adaptation and mitigation measures should be taken to help societies' preparation for future environmental challenges. Some key issues for future TP studies are also discussed.

Third Pole's rapid warming, cryospheric melt↗

An Independent Assessment of Anthropogenic Attribution Statements for Recent Extreme Temperature and Rainfall Events

The annual "State of the Climate" report, published in the Bulletin of the American Meteorological Society (BAMS), has included a supplement since 2011 composed of brief analyses of the human influence on recent major extreme weather events. There are now several dozen extreme weather events examined in these supplements, but these studies have all differed in their data sources as well as their approaches to defining the events, analyzing the events, and the consideration of the role of anthropogenic emissions. This study reexamines most of these events using a single analytical approach and a single set of climate model and observational data sources. In response to recent studies recommending the importance of using multiple methods for extreme weather event attribution, results are compared from these analyses to those reported in the BAMS supplements collectively, with the aim of characterizing the degree to which the lack of a common methodological framework may or may not influence overall conclusions. Results are broadly similar to those reported earlier for extreme temperature events but disagree for a number of extreme precipitation events. Based on this, it is advised that the lack of comprehensive uncertainty analysis in recent extreme weather attribution studies is important and should be considered when interpreting results, but as yet it has not introduced a systematic bias across these studies.

54 ENVIRONMENTAL SCIENCES↗

The Gene Ontology (GO) Cellular Component Ontology: integration with SAO (Subcellular Anatomy Ontology) and other recent developments

Background: The Gene Ontology (GO) (http://www.geneontology.org/) contains a set of terms for describing the activity and actions of gene products across all kingdoms of life. Each of these activities is executed in a location within a cell or in the vicinity of a cell. In order to capture this context, the GO includes a sub-ontology called the Cellular Component (CC) ontology (GO-CCO). The primary use of this ontology is for GO annotation, but it has also been used for phenotype annotation, and for the annotation of images. Another ontology with similar scope to the GO-CCO is the Subcellular Anatomy Ontology (SAO), part of the Neuroscience Information Framework Standard (NIFSTD) suite of ontologies. The SAO also covers cell components, but in the domain of neuroscience. Description: Recently, the GO-CCO was enriched in content and links to the Biological Process and Molecular Function branches of GO as well as to other ontologies. This was achieved in several ways. We carried out an amalgamation of SAO terms with GO-CCO ones; as a result, nearly 100 new neuroscience-related terms were added to the GO. The GO-CCO also contains relationships to GO Biological Process and Molecular Function terms, as well as connecting to external ontologies such as the Cell Ontology (CL). Terms representing protein complexes in the Protein Ontology (PRO) reference GO-CCO terms for their species-generic counterparts. GO-CCO terms can also be used to search a variety of databases. Conclusions: In this publication we provide an overview of the GO-CCO, its overall design, and some recent extensions that make use of additional spatial information. One of the most recent developments of the GO-CCO was the merging in of the SAO, resulting in a single unified ontology designed to serve the needs of GO annotators as well as the specific needs of the neuroscience community.

59 BASIC BIOLOGICAL SCIENCES↗

Recent Progress Validating the HADES Model of LLNL's HEAF MicroCT Measurements

This report compares recent HADES calculations of x-ray linear attenuation coefficients to previous MicroCT measurements made at Lawrence Livermore National Laboratory’s High Energy Applications Facility (HEAF). The chief objective is to investigate what impact recent changes in HADES modeling have on validation results. We find that these changes have no obvious effect on the overall accuracy of the model. Detailed comparisons between recent and previous results are presented.

42 ENGINEERING↗

Recent Developments in Hydrogeologic Applications for Strain Tensor Analyses

Changes in fluid pressure deform porous media and this effect occurs in a variety of hydrogeologic processes, from the change in storage during pumping or injection to fluctuations in water levels caused by barometric pressure. We have developed instruments for measuring small strains in porous media, and we have used the resulting strain data to evaluate well testing, hydraulic fracturing, manual loading at the ground surface, and ambient hydrologic processes, like rainfall and evaporation. A particularly important application is the use of strain tensor data measured at shallow depths to analyze well tests or hydraulic fractures conducted at much greater depths. An early demonstration of this technique was conducted at the North Avant Field north of Tulsa, Oklahoma, where Pennsylvanian sandstone creates a confined aquifer and oil reservoir at a depth of 530m. We have showed that the strains caused by injecting into the aquifer could be measured at a depth of 30m and used to evaluate the properties of the aquifer. We recently expanded the array of strainmeters at the North Avant Field by deploying three more instruments at shallow depth (30m) along with a deep instrument at 520m depth in the winter, 2021. The deep instrument is deployed in shale caprock slightly above the aquifer. To our knowledge, the deep strainmeter at the North Avant Field is the deepest strainmeter ever deployed and this required refining methods originally developed for shallow deployments. The instrument was lowered to depth on oil field tubing and cemented in place using techniques and materials developed for use in oil wells. Optical fiber used to communicate with the instrument was cemented in the annulus on the outside of tubing. This is significant because the techniques we used could readily be extended to greater depth, suggesting that strainmeters can be deployed over a wide range of depths for monitoring critical subsurface processes. For example, it suggests that strainmeters could be deployed through the caprock to monitor for leaks from underlying CO2 storage reservoirs. The strainmeter array at the North Avant Field has been used to characterize deformation during a series of injection tests in the spring and summer, 2021. All the new strainmeters respond to pumping, and the strainmeters we installed earlier also responded. To our knowledge, this is the first application of well testing in a deep aquifer that was monitored by an array of strainmeters—our earlier work used strainmeters at a single location. We are currently analyzing the strain data using an analytical solution, a proxy-based Bayesian inversion algorithm, and other methods. Strainmeter data has also been used to characterize periodic pumping tests by us and Riley Blais. A periodically varying pumping rate causes both hydraulic head and strain signals that vary with the same period as the pumping. The peaks and troughs of the head in monitoring wells lag behind the peaks and troughs of the head in the pumping well, and this lag time increases with distance from the pumping well. The lag time of the pressure and the distance to the monitoring well can be used in a simple analysis to estimate the hydraulic diffusivity of the aquifer. The lag time determined from strain data can be used to estimate aquifer properties using the same analysis that works for the pressure only for strain data measured at particular locations. That is because the strain field in a confining unit advances upward, laterally and then downward even though the pressure in the underlying aquifer only advances laterally, according to our recent simulations. We have field data showing that a small periodic signal superimposed on an injection rate at the North Avant Field will create a periodic strain signal at shallow strainmeters. The field data and the recent simulations suggest that including a periodic component to injection or pumping and then monitoring the resulting strain signal could be a way to monitor the subsurface.

Murdoch, Larry↗