Search NASA⌕ Search

SEARCH · Search NASA

Results for “reference model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

A PRELIMINARY JUPITER MODEL

In anticipation of new observational results for Jupiter's axial moment of inertia and gravitational zonal harmonic coefficients from the forthcoming Juno orbiter, we present a number of preliminary Jupiter interior models. We combine results from ab initio computer simulations of hydrogen–helium mixtures, including immiscibility calculations, with a new nonperturbative calculation of Jupiter's zonal harmonic coefficients, to derive a self-consistent model for the planet's external gravity and moment of inertia. We assume helium rain modified the interior temperature and composition profiles. Our calculation predicts zonal harmonic values to which measurements can be compared. Although some models fit the observed (pre-Juno) second- and fourth-order zonal harmonics to within their error bars, our preferred reference model predicts a fourth-order zonal harmonic whose absolute value lies above the pre-Juno error bars. This model has a dense core of about 12 Earth masses and a hydrogen–helium-rich envelope with approximately three times solar metallicity.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Validation of RU-WRF, the Custom Atmospheric Mesoscale Model of the Rutgers Center for Ocean Observing Leadership

The Rutgers University Center for Ocean Observing Leadership (RU-COOL) contracted the National Renewable Energy Laboratory (NREL) to evaluate RU-COOL's atmospheric observation and modeling capabilities for characterizing the New Jersey offshore wind resource. The observational network used by RU-COOL consists of mostly public but some private coastal and offshore buoy-based stations. The core wind resource modeling capability of RU-COOL is a custom setup of the Weather Research and Forecasting (WRF) mesoscale model, referred to in this report as RU-WRF. The most unique feature of RU-WRF and not found in other WRF model setups is the use of custom sea surface temperature (SST) product generated by RU-COOL. This custom product was designed to better capture the unique coastal upwelling and strong storm mixing in the Mid-Atlantic Bight, which other typical SST products are not designed to capture. Funding for the development, maintenance, and use of RU-WRF by RU-COOL is provided by the New Jersey Board of Public Utilities, who also funded the validation work presented in this report. In this validation study, NREL was specifically tasked to: 1) Assess the observational network used by RU-COOL to validate RU-WRF and make recommendations for improvement, 2) Assess methods used by RU-COOL to validate RU-WRF and make recommendations for improvement, 3) Examine the inputs to and setup within RU-WRF, compare against available NREL data sets, and make recommendations for improvement.

17 WIND ENERGY↗
DOE OSTI2016

Mass–radius relation for rocky planets based on PREM

Several small dense exoplanets are now known, inviting comparisons to Earth and Venus. Such comparisons require translating their masses and sizes to composition models of evolved multi-layer interior planets. Such theoretical models rely on our understanding of the Earth’s interior, as well as independently derived equations of state, but so far have not involved direct extrapolations from Earth’s seismic model: the Preliminary Reference Earth Model (PREM). To facilitate more detailed compositional comparisons between small exoplanets and the Earth, we derive here a semi-empirical mass–radius relation for two-layer rocky planets based on PREM, (R/(R{sub ⊕}))=(1.07−0.21⋅CMF)⋅((M/(M{sub ⊕}))){sup 1/3.7}, where CMF stands for core mass fraction. It is applicable to 1 ∼ 8 M{sub ⊕} and a CMF of 0.0 ∼ 0.4. Applying this formula to Earth and Venus and several known small exoplanets with radii and masses measured to better than ∼30% precision gives a CMF fit of 0.26 ± 0.07.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Gas Gun Model and Comparison to Experimental Performance of Pipe Guns Operating with Light Propellant Gases and Large Cryogenic Pellets

Injection of multiple large (~10 to 30 mm diameter) shattered pellets into ITER plasmas is presently part of the scheme planned to mitigate the deleterious effects of disruptions on the vessel components. To help in the design and optimize performance of the pellet injectors for this application, a model referred to as “the gas gun simulator” has been developed and benchmarked against experimental data. The computer code simulator is a Java program that models the gas-dynamics characteristics of a single-stage gas gun. Following a stepwise approach, the code utilizes a variety of input parameters to incrementally simulate and analyze the dynamics of the gun as the projectile is launched down the barrel. Using input data, the model can calculate gun performance based on physical characteristics, such as propellant-gas and fast-valve properties, barrel geometry, and pellet mass. Although the model is fundamentally generic, the present version is configured to accommodate cryogenic pellets composed of H2, D2, Ne, Ar, and mixtures of them and light propellant gases (H2, D2, and He). The pellets are solidified in situ in pipe guns that consist of stainless steel tubes and fast-acting valves that provide the propellant gas for pellet acceleration (to speeds ~200 to 700 m/s). The pellet speed is the key parameter in determining the response time of a shattered pellet system to a plasma disruption event. The calculated speeds from the code simulations of experiments were typically in excellent agreement with the measured values. With the gas gun simulator validated for many test shots and over a wide range of physical and operating parameters, it is a valuable tool for optimization of the injector design, including the fast valve design (orifice size and volume) for any operating pressure (~40 bar expected for the ITER application) and barrel length for any pellet size (mass, diameter, and length). Key design parameters and proposed values for the pellet injectors for the ITER disruption mitigation systems are discussed.

Combs, S. K.↗
DOE OSTI2017

A new and inexpensive non-bit-for-bit solution reproducibility test based on time step convergence (TSC1.0)

A test procedure is proposed for identifying numerically significant solution changes in evolution equations used in atmospheric models. The test issues a fail signal when any code modifications or computing environment changes lead to solution differences that exceed the known time step sensitivity of the reference model. Initial evidence is provided using the Community Atmosphere Model (CAM) version 5.3 that the proposed procedure can be used to distinguish rounding-level solution changes from impacts of compiler optimization or parameter perturbation, which are known to cause substantial differences in the simulated climate. The test is not exhaustive since it does not detect issues associated with diagnostic calculations that do not feedback to the model state variables. Nevertheless, it provides a practical and objective way to assess the significance of solution changes. The short simulation length implies low computational cost. The independence between ensemble members allows for parallel execution of all simulations, thus facilitating fast turnaround. The new method is simple to implement since it does not require any code modifications. We expect that the same methodology can be used for any geophysical model to which the concept of time step convergence is applicable.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

High-Fidelity Modelng and Simulation for a High Flux Isotope Reactor Low-Enriched Uranium Core Design

A high-fidelity model of the High Flux Isotope Reactor (HFIR) with a low-enriched uranium (LEU) fuel design and a representative experiment loading has been developed to serve as a new reference model for LEU conversion studies. With the exception of the fuel elements, this HFIR LEU model is completely consistent with the current highly enriched uranium HFIR model. Results obtained with the new LEU model provide a baseline for analysis of alternate LEU fuel designs and further optimization studies. The newly developed HFIR LEU model has an explicit representation of the HFIR-specific involute fuel plate geometry, including the within-plate fuel meat contouring, and a detailed geometry model of the fuel element side plates. Such high-fidelity models are necessary to accurately account for the self-shielding from 238 U and the depletion of absorber materials present in the side plates. In addition, a method was developed to account for fuel swelling in the high-density LEU fuel plates during the depletion simulation. In conclusion, calculated time-dependent metrics for the HFIR LEU model include fission rate and cumulative fission density distributions, flux and reaction rates for relevant experiment locations, point kinetics data, and reactivity coefficients.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Expanding the representation of aerosol, cloud, and precipitation processes with graph network-based simulators

We explored a novel framework for simulating the small-scale processes that drive the evolution of aerosol, cloud, and precipitation particles, which are a critical gap in the predictive understanding of weather and climate. Particle-based methods have emerged as an effective tool for modeling aerosol-cloud-precipitation interactions, but existing particle-based models are computationally too expensive to simulate the large domains relevant for the atmosphere or to represent the full suite of relevant processes. The lack of a comprehensive and efficient reference model is a critical bottleneck in our understanding of cloud and precipitation processes and our ability to parameterize these processes for regional- and global-scale simulations. To address this need, we explored an approach to accelerate and expand particle-based models using a new machine learning approach, graph network-based simulators (GNS). Rather than modeling the evolution of the system by numerically integrating continuity equations, the GNS represents dynamics through learned message passing. Our aim was to develop fast and accurate surrogate models for particle-based simulations. We explored applying GNS to simulate cloud droplet transport, growth, and evaporation under turbulent conditions, but we found the GNS over-smoothed the simulations. We then applied the GNS to simulate aerosol dynamics through gas condensation and found the GNS was able to reproduce the benchmark, physics-based simulation with high accuracy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Quantum chaos on edge

Recently, the physics of many-body quantum chaotic systems close to their ground states has come under intensified scrutiny. Such studies are motivated by the emergence of model systems exhibiting chaotic fluctuations throughout the entire spectrum [the Sachdev-Ye-Kitaev (SYK) model being a renowned representative] as well as by the physics of holographic principles, which likewise unfold close to ground states. Interpreting the edge of the spectrum as a quantum critical point, here we combine a wide range of analytical and numerical methods to the identification and comprehensive description of two different universality classes: the near edge physics of “sparse” and the near edge of “dense” chaotic systems. The distinction lies in the ratio between the number of a system's random parameters and its Hilbert space dimension, which is exponentially small or algebraically small in the sparse and dense case, respectively. Notable representatives of the two classes are generic chaotic many-body models (sparse) and invariant random matrix ensembles or chaotic gravitational systems (dense). While the two families share identical spectral correlations at energy scales comparable to the level spacing, the density of states and its fluctuations near the edge are different. Considering the SYK model as a representative of the sparse class, we apply a combination of field theory and exact diagonalization to a detailed discussion of its edge spectrum. Conversely, Jackiw-Teitelboim gravity is our reference model for the dense class, where an analysis of the gravitational path integral and random matrix theory reveal universal differences to the sparse class, whose implications for the construction of holographic principles we discuss. Published by the American Physical Society 2024

Altland, Alexander (ORCID:0000000229914805)↗
DOE OSTI2014

Design of set-point weighting PI{sup λ} + D{sup μ} controller for vertical magnetic flux controller in Damavand tokamak

In this paper, a simple method is presented for tuning weighted PI{sup λ} + D{sup μ} controller parameters based on the pole placement controller of pseudo-second-order fractional systems. One of the advantages of this controller is capability of reducing the disturbance effects and improving response to input, simultaneously. In the following sections, the performance of this controller is evaluated experimentally to control the vertical magnetic flux in Damavand tokamak. For this work, at first a fractional order model is identified using output-error technique in time domain. For various practical experiments, having desired time responses for magnetic flux in Damavand tokamak, is vital. To approach this, at first the desired closed loop reference models are obtained based on generalized characteristic ratio assignment method in fractional order systems. After that, for the identified model, a set-point weighting PI{sup λ} + D{sup μ} controller is designed and simulated. Finally, this controller is implemented on digital signal processor control system of the plant to fast/slow control of magnetic flux. The practical results show appropriate performance of this controller.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

GRIZZLY MODEL OF FULLY COUPLED HEAT TRANSFER, MOISTURE DIFFUSION, ALKALI-SILICA REACTION AND FRACTURING PROCESSES IN CONCRETE

Idaho National Laboratory (INL) has been developing a fully coupled thermo-hydro-mechanical-chemical (THMC) concrete model, referred as Grizzly, with the ultimate goal of reliably simulating and predicting the long-term performance of concrete structures subjected to various aging and degradation mechanisms. In this paper, we present a fully coupled concrete model implemented in our Grizzly code for simulating coupled moisture/heat transfer, stress-dependent ASR swelling and elastic/inelastic mechanics. Example simulation results and preliminary model validation results against experimental data reported in the literature will be provided also in this paper. The close matches between the simulation results and experiments clearly reveal the potential of the fully coupled solution strategy for solving tightly coupled THMC concrete models. We also present simulation results of using a rate-dependent damaging mechanics model for simulating the ASR swelling induced degradation of concrete structures and its feedback to moisture and heat transport processes.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Impedance Emulation Control of Wave Energy Converters

Modeling and control of wave energy conversion (WEC) systems for maximum power extraction is challenging due to complex multiphysics that include fluids, mechanics, and machine drives. To uncover an intuitive model that clearly depicts WEC system operation, we utilize a force-current equivalent circuit framework which then enables us to design an impedance emulation control strategy. To provide context for our framework, we focus on a standard reference model-3 (RM3) point absorber device coupled to a permanent magnet synchronous generator. After the proposed extremum seeking controller is computed, we experimentally validate its performance on a platform that consists of two back-to-back connected inverters that emulate the WEC system.

wave energy conversion, impedance emulation, machi↗
DOE OSTI2021

Decentralized Filtering Adaptive Neural Network Control for Uncertain Switched Interconnected Nonlinear Systems

This article presents a novel decentralized filtering adaptive neural network control framework for uncertain switched interconnected nonlinear systems. Each subsystem has its own decentralized controller based on the established decentralized state predictor. For each subsystem, the nonlinear uncertainties are approximated by a Gaussian radial basis function (GRBF) neural network incorporated with a piecewise constant adaptive law, where the adaptive law will update adaptive parameters from the error dynamics between the host system and the decentralized state predictor by discarding the unknowns, whereas a decentralized filtering control law is derived to cancel both local and mismatched uncertainties from other subsystems, as well as achieve the local objective tracking of the host system. The achievement of global objective depends on the achievement of local objective for each subsystem. The matched uncertainties are canceled directly by adopting their opposite in the control signal, whereas a dynamic inversion of the system is required to eliminate the effect of the mismatched uncertainties on the output. By exploiting the average dwell time principle, the error bounds between the real system and the virtual reference system, which defines the best performance that can be achieved by the closed-loop system, are derived. A numerical example is given to illustrate the effectiveness of the decentralized filtering adaptive neural network control architecture by comparing against the model reference adaptive control (MRAC).

Average dwell time, decentralized, filtering adapt↗
DOE OSTI2022

Calculating adsorption isotherms using the two-phase thermodynamic method and molecular dynamics simulations

We describe the calculation of adsorption isotherms from molecular dynamics simulations based on the two-phase thermodynamic (2PT) model. The 2PT model developed for bulk fluid phases treats the gas-like components as hard spheres (HSs), which correctly recovers the limiting behaviors of unconfined fluids. We showed that this treatment, however, does not always lead to the correct zero-loading behavior in strongly confining systems. For methane adsorption into zeolite MFI, the HS reference state underestimates entropy by up to 20% at low loadings and leads to an order-of-magnitude increase in the adsorption onset pressure. To fix these issues, we propose the use of ideal adsorbed gas (IAG) as the gas reference model, the properties of which can be computed using the Widom insertion method on an empty adsorbent. We further describe three routes to compute adsorption isotherms from the Helmholtz free energy at different loadings. Comparing against established Monte Carlo (MC) methods, we found that the adsorption isotherms obtained using the IAG reference state agrees to within 40%, which corresponds to deviations of <5% in adsorption free energy. The isotherms calculated using the HS reference state underestimate the adsorption uptake at low to medium loadings in strongly confining systems, but its accuracy improves at higher loadings and as the pore size increases relative to the sorbate diameter. The methods described here provide an alternative approach for computing adsorption isotherms when MC simulations in an open ensemble are undesirable and enable a direct comparison of computed adsorption thermodynamics with experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Identifying Meteorological Drivers for Errors in Modeled Winds along the Northern California Coast

Abstract An accurate wind resource dataset is required for assessing the potential energy yield of floating offshore wind farms that are expected along the California outer continental shelf. The National Renewable Energy Laboratory has developed and disseminated an updated wind resource dataset offshore of California, using the Weather Research and Forecasting Model, referred to as the CA20 dataset. As compared to buoy lidar measurements that have become available recently, the CA20 dataset showed significant positive biases for 100-m wind speeds along Northern California wind energy lease areas. To investigate the meteorological drivers for the model errors, we first consider two 1-yr simulations run with two different planetary boundary layer (PBL) parameterizations: the Mellor–Yamada–Nakanishi–Niino (MYNN) PBL scheme (the chosen configuration in the CA20 dataset) and the Yonsei University PBL scheme (which significantly reduces the bias in modeled winds). By comparing the 1-yr simulations to the concurrent lidar buoy observations, we find that errors are larger with the MYNN PBL scheme in warm seasons. We then dive deeper into the analysis by running simulations for short-term (3-day) case studies to evaluate the sensitivity of initial/boundary condition forcings on model results. By analyzing the short-term simulations, we find that during synoptic-scale northerly flows driven by the North Pacific high and inland thermal low, a coastal warm bias in the MYNN simulation is mainly responsible for the modeled wind speed bias by altering the boundary layer thermodynamics. The results of our analysis will help guide the creation of an updated version of the CA20 dataset.

17 WIND ENERGY↗
DOE OSTI2016

DREISS: Using State-Space Models to Infer the Dynamics of Gene Expression Driven by External and Internal Regulatory Networks

Gene expression is controlled by the combinatorial effects of regulatory factors from different biological subsystems such as general transcription factors (TFs), cellular growth factors and microRNAs. A subsystem’s gene expression may be controlled by its internal regulatory factors, exclusively, or by external subsystems, or by both. It is thus useful to distinguish the degree to which a subsystem is regulated internally or externally–e.g., how non-conserved, species-specific TFs affect the expression of conserved, cross-species genes during evolution. We developed a computational method (DREISS, dreiss.gerteinlab.org) for analyzing the Dynamics of gene expression driven by Regulatory networks, both External and Internal based on State Space models. Given a subsystem, the “state” and “control” in the model refer to its own (internal) and another subsystem’s (external) gene expression levels. The state at a given time is determined by the state and control at a previous time. Because typical time-series data do not have enough samples to fully estimate the model’s parameters, DREISS uses dimensionality reduction, and identifies canonical temporal expression trajectories (e.g., degradation, growth and oscillation) representing the regulatory effects emanating from various subsystems. To demonstrate capabilities of DREISS, we study the regulatory effects of evolutionarily conserved vs. divergent TFs across distant species. In particular, we applied DREISS to the time-series gene expression datasets of C. elegans and D. melanogaster during their embryonic development. We analyzed the expression dynamics of the conserved, orthologous genes (orthologs), seeing the degree to which these can be accounted for by orthologous (internal) versus species-specific (external) TFs. We found that between two species, the orthologs have matched, internally driven expression patterns but very different externally driven ones. This is particularly true for genes with evolutionarily ancient functions (e.g. the ribosomal proteins), in contrast to those with more recently evolved functions (e.g., cell-cell communication). This suggests that despite striking morphological differences, some fundamental embryonic-developmental processes are still controlled by ancient regulatory systems.

Biochemistry & Molecular Biology↗
DOE OSTI2015

SU-E-I-80: Quantification of Respiratory and Cardiac Motion Effect in SPECT Acquisitions Using Anthropomorphic Models: A Monte Carlo Simulation Study

Purpose: The purpose of the present study was to quantify, evaluate the impact of cardiac and respiratory motion on clinical nuclear imaging protocols. Common SPECT and scintigraphic scans are studied using Monte Carlo (MC) simulations, comparing the resulted images with and without motion. Methods: Realistic simulations were executed using the GATE toolkit and the XCAT anthropomorphic phantom as a reference model for human anatomy. Three different radiopharmaceuticals based on 99mTc were studied, namely 99mTc-MDP, 99mTc—N—DBODC and 99mTc—DTPA-aerosol for bone, myocardium and lung scanning respectively. The resolution of the phantom was set to 3.5 mm{sup 3}. The impact of the motion on spatial resolution was quantified using a sphere with 3.5 mm diameter and 10 separate time frames, in the ECAM modeled SPECT scanner. Finally, respiratory motion impact on resolution and imaging of lung lesions was investigated. The MLEM algorithm was used for data reconstruction, while the literature derived biodistributions of the pharmaceuticals were used as activity maps in the simulations. Results: FWHM was extracted for a static and a moving sphere which was ∼23 cm away from the entrance of the SPECT head. The difference in the FWHM was 20% between the two simulations. Profiles in thorax were compared in the case of bone scintigraphy, showing displacement and blurring of the bones when respiratory motion was inserted in the simulation. Large discrepancies were noticed in the case of myocardium imaging when cardiac motion was incorporated during the SPECT acquisition. Finally the borders of the lungs are blurred when respiratory motion is included resulting to a dislocation of ∼2.5 cm. Conclusion: As we move to individualized imaging and therapy procedures, quantitative and qualitative imaging is of high importance in nuclear diagnosis. MC simulations combined with anthropomorphic digital phantoms can provide an accurate tool for applications like motion correction techniques’ optimization. This research has been co-funded by the European Union (European Social Fund) and Greek national resources under the framework of the ‘Archimedes III: Funding of Research Groups in TEI of Athens’ project of the ‘Education & Lifelong Learning’ Operational Programme.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Prescribing the aerosol effective radiative forcing in the Simple Cloud-Resolving E3SM Atmosphere Model v1

Aerosol effective radiative forcing critically influences climate projections but remains poorly constrained. Using the Simple Cloud-Resolving E3SM Atmosphere Model (SCREAM) v1 configuration, we assess the sensitivity of the radiative forcing due to anthropogenic aerosol changes using a simplified prescribed aerosol scheme (SPA) derived from E3SM v3. Nudged simulations at 3 and 12 km horizontal grid spacings reveal a more negative aerosol forcing than the reference 100 km E3SM v3 whence the SPA properties are derived. The resulting globally averaged aerosol forcing signal is largely due to aerosol–cloud interactions and exhibits little overall resolution sensitivity, while hints of resolution sensitivity appear regionally between the 3 and 12 km runs. While the default SPA scheme overestimates cloud droplet dependence on aerosols, parameterization adjustments in the activation process reconcile forcing estimates with the reference model. Our results demonstrate the ability to use a prescribed aerosol scheme to hold aerosol forcing to a desired strength across resolutions.

54 ENVIRONMENTAL SCIENCES↗