Remote probing of wind and turbulence through cross-correlation of passive signals
Remote monitoring of atmospheric wind and turbulence by cross correlation passive techniques, measuring heat and humidity fluxes
Abshire, N. L.↗
SEARCH · Search NASA
Results for “remote monitoring”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Environment surveys
Environment applications are concerned with the quality, protection, and improvement of water, land, and air resources and, in particular, with the pollution of these resources caused by man and his works, as well as changes to the resources due to natural phenomena (for example, drought and floods). The broad NASA objectives related to the environment are directed toward the development and demonstration of the capability to monitor remotely and assess environmental conditions related to water quality, land and vegetation quality, wildlife resources, and general environment. The contributions of ERTS-1 to these subdiscipline areas are broadly summarized.
Greenwood, L. R.↗
Evaluation of Raman scattering as a sensor of temperature and molecular density
The performance of the Raman scattering technique for the remote monitoring of temperature and molecular number density in various wind tunnel and engine testing facilities has been experimentally evaluated. Temperature measurements were made by monitoring the pure rotational spectrum of nitrogen and the rotational branch separations of nu2 of CF4 for temperatures in the range 300 to 1000 K. These measurements yielded an average error of 2.6 and 7.6%, respectively, for temperature measurements at pressures near 1 atm. Molecular number density measurements with 20% error could be made at densities as low as 3.5 times 10 to the 22-nd power per cu m by monitoring the 6 to 8 rotational transition of nitrogen, 3.5 times 10 to the 23-rd power per cu m by monitoring the Q-branch of the fundamental vibrational transition of nitrogen, and 7 times 10 to the 22-nd power per cu m by monitoring the nu1 fundamental vibrational transition of CF4.
Bandy, A. R.↗
Disposable biomedical electrode
Reusable recording cap equipped with compressible snap-on bioelectronic electrodes is worn by patient to allow remote monitoring of electroencephalogram and electro-oculogram waveforms. Electrodes can be attached to inside surface of stretch-textile cap at twelve monitoring positions and at one or two ground positions.
Frost, J. D., Jr.↗
Visible and infrared imaging radiometers for ocean observations
The current status of visible and infrared sensors designed for the remote monitoring of the oceans is reviewed. Emphasis is placed on multichannel scanning radiometers that are either operational or under development. Present design practices and parameter constraints are discussed. Airborne sensor systems examined include the ocean color scanner and the ocean temperature scanner. The costal zone color scanner and advanced very high resolution radiometer are reviewed with emphasis on design specifications. Recent technological advances and their impact on sensor design are examined.
Barnes, W. L.↗
Ergonomics technology
Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.
Jones, W. L.↗
Laboratory measurements of radiance and reflectance spectra of dilute primary-treated sewage sludge
The feasibility of remotely monitoring ocean dumping of waste products such as acid and sewage sludge is evaluated. The laboratory arrangement, solar simulator, and test results from three experiments conducted in the laboratory are described. Radiance and reflectance spectra are presented for primary-treated sewage sludge mixed with two types of base water. Results indicate that upwelled reflectance varies in a near-linear manner with concentration and that the sludge has a practically flat signal response between 420 and 970 nm. Well-defined upwelled reflectance spectra were obtained for the sewage-sludge mixtures at all wavelengths and concentrations. The spectral-reflectance values appeared to be influenced by the type of base water, but this influence was small, especially for the mixtures with low concentrations of sewage sludge.
Usry, J. W.↗
Laboratory measurements of radiance and reflectance spectra of dilute secondary-treated sewage sludge
The National Aeronautics and Space Administration (NASA), in cooperation with the Environmental Protection Agency (EPA) and the National Oceanic and Atmospheric Administration (NOAA), conducted a research program to evaluate the feasibility of remotely monitoring ocean dumping of waste products such as acid and sewage sludge. One aspect of the research program involved the measurements of upwelled spectral signatures for sewage-sludge mixtures of different concentrations in an 11600-liter tank. This paper describes the laboratory arrangement and presents radiance and reflectance spectra in the visible and near-infrared ranges for concentrations ranging from 9.7 to 180 ppm of secondary-treated sewage sludge mixed with two types of base water. Results indicate that upwelled radiance varies in a near-linear manner with concentration and that the sludge has a practically flat signal response between 420 and 970 nm. Reflectance spectra were obtained for the sewage-sludge mixtures at all wavelengths and concentrations.
Witte, W. G.↗
Polarimeter measures sea state characteristics using emitted infrared radiation
An infrared polarimeter, capable of operating between 1 and 12 micrometers wavelength has been used to measure the polarization of emitted radiation from the sea. The observed polarization at 10.6 micrometers from a smooth sea was found to be positive, indicating the dominance of reflected infrared sky radiation over the emitted. With the appearance of waves, the percent polarization increased, as expected, for a zenith angle well above the Brewster angle for water. This is qualitatively in accordance with a model presented to explain the behavior. Initial analyses indicate that the polarized components of the sea's emitted and reflected radiation are affected by type and direction of waves, angle of viewing, and foam. The effects of variations in these parameters require further delineation. The infrared polarimetric technique appears to be a novel new passive method for remote monitoring of waves.
Egan, W. G.↗
Visible and infrared imaging radiometers for ocean observations
The technology of visible and infrared imaging sensors designed for the remote monitoring of the oceans is assessed. Emphasis is placed on multichannel scanning radiometers that are either operational or under development. Present design practices and parameter constraints are discussed. Airborne sensor systems examined include the Ocean Color Scanner (OCS) and the Ocean Temperature Scanner (OTS). The Coastal Zone Color Scanner (CZCS) and Advanced Very High Resolution Radiometer (AVHRR), are reviewed with emphasis on design specifications, expected completion, and anticipated performance. Finally, recent technology advances and their probable impact on sensor design are examined.
Barnes, W. L.↗
Remote sensing of earth resources using a spaceborne microwave radiometer
A microwave radiometer was one of five experiments installed onboard the NASA Skylab spacecraft in order to remotely monitor selective earth resources information. The essential features of the radiometer are described, and typical data required in space is also presented in order to illustrate the instrument's utility.
Leber, A.↗
A statistical technique for determining rainfall over land employing Nimbus 6 ESMR measurements
Statistical analysis of the Nimbus 6 ESMR measurements for remote monitoring of active rainfall data over land is presented. Horizontally and vertically polarized brightness temperature pairs from ESMR 6 were sampled for areas of rainfall over land as determined from the rain recording stations and the WSR 57 radar, and wet and dry ground over the southeastern U.S. These three categories of brightness temperatures were significantly different so that the possibilities of the mean vectors of any two populations coinciding were less than 1 in 100, so that classification algorithms were then developed. The Fisher linear classifier, the Bayesian quadratic classifier, and a non-parametric linear classifier were examined, and the Bayesian algorithm performed best. It was concluded that a rainfall area delineated by the Bayesian classifier coincided well with the synoptic-scale rainfall area mapped by ground recording rain data and radar echoes.
Rodgers, E.↗
Radar target for remotely sensing hydrological phenomena
An apparatus for remotely measuring and accessing water status relative to snow and glacial melt, surface runoff, rainfall, evaporation, flow rate, and soil moisture is described. A radar target located at a selected location on the surface of the Earth is designed to collect water and render its cross sectional area variable as a function of the height of the water level within the target. The target is remotely monitored by an orbiting or airborne synthetic aperature radar. The target appears as a bright spot embedded within the radar image. The target brightness is indicative of the height of the water level within the ground located target.
Sivertson, W. E., Jr.↗
Design, development, and field testing of Infrared Heterodyne Radiometer (IHR) for remote profiling of tropospheric and stratospheric species
The performance of a dual-channel infrared heterodyne radiometer, designed to remotely monitor the concentration and vertical distribution of selected atmospheric species, is described. Ground based solar viewing measurement using the IHR were performed at selected laser transitions for ammonia (NH3 and ozone O3). Flight tests were conducted aboard the Galileo II, NASA Ames CV-990, on the Latitude Survey Mission. Ozone was the selected atmospheric species for the airborne flight measurements because of the scientific interest in this atmospheric species, the availability of in situ monitors, the coordinated ozone measurements, and the availability of ground truth data. The IHS was operated in the solar viewing mode to determine ozone distributions in the stratosphere and in the nadir viewing mode to determine the ozone distribution in the troposphere. Airborne atmospheric propagation measurements also were carried out at selected CO2 laser transitions.
Lange, R.↗
Microwave response of snow
Truck-mounted microwave sensors were used to acquire backscattering coefficient and apparent temperature data for snow-covered terrain at 19 frequencies between 1 and 18 GHz and at 35.6 GHz. Passive microwave measurements were made at 10.7, 37, and 94 GHz. The radar backscattering coefficient and radiometric emissivity were evaluated as a function of snow depth, wetness, surface roughness, and other snow parameters. It is shown that volume scattering makes the radar backscattering coefficient to increase and the radiometric emissivity to decrease with increasing snow depth until the snow layer appears electromagnetically semiinfinite in extent. The presence of liquid water in the snowpack results in increased attenuation and reduction in scattering which leads to less backscatter and more emission by the snow volume. It is concluded that microwave sensors have the potential capability for remotely monitoring both the snow equivalent and wetness of snowpacks.
Ulaby, F. T.↗
Fiber-optic sensing in cryogenic environments
Passive optical sensors using fiber-optic signal transmission to a remote monitoring station are explored as an alternative to electrical sensors used to monitor the status of explosive propellants. The designs of passive optical sensors measuring liquid level, pressure, and temperature in cryogenic propellant tanks are discussed. Test results for an experimental system incorporating these sensors and operating in liquid nitrogen demonstrate the feasibility of passive sensor techniques and indicate that they can serve as non-hazardous replacements for more conventional measuring equipment in explosive environments.
Sharma, M.↗
Self-Identifying Reflecting Targets
Proposed scheme for target identification requires no radiation of energy by target itself. Instead, target alters light beam reflected from itself back to interrogating station in unique way. Interrogator then identifies target from its signature impressed on returned beam. Selfidentifying target useful in surveying, navigation, and remote monitoring (for example, of mountain-climbing parties.)
Frazer, R. E.↗
Electron-impact of the OI 1641.3 A line emission
The cross section for the dissociative excitation of the forbidden OI(2p41D-3s3S, 1641.3 A) transition by electron impact on O2 is measured. At 100 eV, a cross section value of 1.22 x 10 to the -23/sq cm + 2 - 35 percent is found. This result is consistent with recent estimates of this branching ratio from theoretical calculations and aeronomical observations and supports the suggestion by Meier et al. (1985) that observation of the OI 1641.3 A line would be useful for remote monitoring of atomic oxygen in the upper atmosphere.
Erdman, P. W.↗