Search NASA⌕ Search

SEARCH · Search NASA

Results for “rotating disc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

159 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Magnetic forces in high-Tc superconducting bearings

In September 1987, researchers at Cornell levitated a small rotor on superconducting bearings at 10,000 rpm. In April 1989, a speed of 120,000 rpm was achieved in a passive bearing with no active control. The bearing material used was YBa2Cu307. There is no evidence that the rotation speed has any significant effect on the lift force. Magnetic force measurements between a permanent rare-earth magnet and high T(sub c) superconducting material versus vertical and lateral displacements were made. A large hysteresis loop results for large displacements, while minor loops result for small displacements. These minor loops seem to give a slope proportional to the magnetic stiffness, and are probably indicative of flux pinning forces. Experiments of rotary speed versus time show a linear decay in a vacuum. Measurements of magnetic dipole over a high-T(sub c) superconducting disc of YBCO show that the lateral vibrations of levitated rotors were measured which indicates that transverse flux motion in the superconductor will create dissipation. As a result of these force measurements, an optimum shape for the superconductor bearing pads which gives good lateral and axial stability was designed. Recent force measurements on melt-quench processed superconductors indicate a substantial increase in levitation force and magnetic stiffness over free sintered materials. As a result, application of high-T(sub c) superconducting bearings are beginning to show great promise at this time.

Moon, F. C.↗
NASA NTRS1981

The rotation of Uranus

A historical review of the use of three independent techniques for measuring the rotational rate is presented. The approaches examined are: (1) using theoretical interior models together with observations of the oblateness and the gravitational moment; (2) studying periodic fluctuations in the brightness; and (3) spectrographically measuring the Doppler shifts (line tilts). Measurements of line tilts obtained using the Kitt Peak National Observation 4 meter telescope with a Cassegrain echelle to high obtain high spectral dispersion and large image are discussed and compared with results obtained by Muench and Hipplelein (1980) and by Hayes and Belton (1977). The possibility of using speckel imaging techniques to detect the motion of features across the disc in the 6091 methane band, and with more suitable image intensifiers, in the 7261 band is considered.

Goody, R. M.↗
NASA NTRS1990

Magnetic forces in high-T(sub c) superconducting bearings

In September 1987 research at Cornell levitated a small rotor on superconducting bearing at 10,000 rpm. In April 1989 a speed of 120,000 rpm was achieved in a passive bearing with no active control. The bearing material used was YBa2Cu3O7. There is no evidence that the rotation speed has any significant effect on the lift force. Magnetic force measurements between a permanent rare-earth magnet and high T(sub c) superconducting material versus vertical and lateral displacements were made. A large hysteresis loop results for large displacements, while minor loops result for small displacements. These minor loops seem to give a slope proportional to the magnetic stiffness, and are probably indicative of flux pinning forces. Experiments of rotary speed versus time show a linear decay in a vacuum. Measurements of magnetic drag forces of a magnetic dipole over a high-T(sub c) superconducting disc of YBCO show that the drag force reaches a constant value, independent of the speed. Dampling of lateral vibrations of levitated rotors were measured which indicates that transverse flux motion in the superconductor will create dissipation. As a result of these force measurements, an optimum shape for the superconductor bearing pads which gives good lateral and axial stability was designed. Recent force measurements on melt-quench processed superconductors indicate a substantial increase in levitation force and magnetic stiffness over free sintered materials. As a result, application of high-T(sub c) superconducting bearings are beginning to show great promise at this time.

Moon, F. C.↗
NASA NTRS2018

New Runtime Record Set for Free-Piston Stirling Machine

This article describes the recent progress GRC has made in the arena of long-life heat engines for power conversion. NASA has been interested in Stirling-cycle machines for power conversion since the 1970s. At that time, it was recognized that such a device could be designed to achieve long-life continuous operation with high reliability, by leveraging the free-piston configuration in favor of a kinematic engine. The free-piston variant eliminates the wear mechanisms associated with rolling-element bearings, piston rings, and connecting rods, typically found in kinematic Stirling engine designs. By restricting the moving components to linear motion only, there is no need to convert linear piston movement to rotating motion. With this, the moving components can be suspended within their cylinders by non-contacting bearings and seals can be effected with close clearances, also non-contacting. The use of a linear alternator attached directly to the piston enables direct conversion of heat, to mechanical, then to electrical energy, all in one hermetically sealed vessel, The electrical output only requires simple feedthroughs, and the complexity of sealed a rotating crankshaft is eliminated. In the free-piston variant, the displacer-to-piston phase is not implemented by a connection to a common rotating shaft. Instead, the pressure wave itself is used to drive the displacer. The displacer is designed to have a higher natural frequency of motion than the piston, which achieves a leading phase angle required for power production. The free-piston Stirling behaves like a spring-mass-damper system, with a forcing function created by the alternate heater and cooling of the working gas, and damping provided by the current flowing through the linear alternator. Two types of non-contacting bearings are available to designers: flexure and gas bearings. Flexure bearings consist of a spiral-cut disc of metal that has high radial stiffness but a deliberately engineering stiffness in the axial direction, to permit piston and displacer resonant motion. Gas bearings utilize a pressure source and precisely machined flow channels to provide a radial stiffness around the moving component. The pressure source can be supplied by the engine's pressure wave itself.

Oriti, Salvatore M.↗
DOE OSTI2022

Star-forming S0 Galaxies in SDSS-MaNGA: fading spirals or rejuvenated S0s?

ABSTRACT We investigate the origin of rare star formation in an otherwise red-and-dead population of S0 galaxies, using spatially resolved spectroscopy. Our sample consists of 120 low redshift (z < 0.1) star-forming S0 (SF-S0) galaxies from the SDSS-IV MaNGA DR15. We have selected this sample after a visual inspection of deep images from the DESI Legacy Imaging Surveys DR9 and the Subaru/HSC-SSP survey PDR3 to remove contamination from spiral galaxies. We also construct two control samples of star-forming spirals (SF-Sps) and quenched S0s (Q-S0s) to explore their evolutionary link with the star-forming S0s. To study star formation at resolved scales, we use dust-corrected H α luminosity and stellar density (Σ⋆) maps to construct radial profiles of star formation rate (SFR) surface density (ΣSFR) and specific SFR (sSFR). Examining these radial profiles, we find that star formation in SF-S0s is centrally dominated as opposed to disc-dominated star formation in spirals. We also compared various global (size–mass relation, bulge-to-total luminosity ratio) and local (central stellar velocity dispersion) properties of SF-S0s to those of the control sample galaxies. We find that SF-S0s are structurally similar to the quenched S0s and are different from star-forming spirals. We infer that SF-S0s are unlikely to be fading spirals. Inspecting stellar and gas velocity maps, we find that more than $50{{\ \rm per\ cent}}$ of the SF-S0 sample shows signs of recent galaxy interactions such as kinematic misalignment, counter-rotation, and unsettled kinematics. Based on these results, we conclude that in our sample of SF-S0s, star formation has been rejuvenated, with minor mergers likely to be a major driver.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2002

X-ray Dips Followed by Superluminal Ejections as Evidence for An Accretion Disc Feeding the Jet in A Radio Galaxy

Accretion onto black holes is thought to power the relativistic jets and other high-energy phenomena in both active galactic nuclei (AGNs) and the "microquasar" binary systems located in our Galaxy. However, until now there has been insufficient multifrequency monitoring to establish a direct observational link between the black hole and the jet in an AGE. This contrasts with the case of microquasars, in which superluminal features appear and propagate down the radio jet shortly after sudden decreases in the X-ray flux. Such an X-ray dip is most likely caused by the disappearance of a section of the inner accretion disc, part of which falls past the event horizon and the remainder of which is injected into the jet. This infusion of energy generates a disturbance that propagates down the jet, creating the appearance of a superluminal bright spot. Here we report the results of three years of intensive monitoring of the X-ray and radio emission of the Seyfert-like radio galaxy 3C 120. As in the case of microquasars, dips in the X-ray emission are followed by ejections of bright superluminal knots in the radio jet. Comparison of the characteristic length and time scales allows us to infer that the rotational states of the black holes in these two objects are different.

Marscher, Alan P.↗
DOE OSTI2024

Geometric and thermodynamic characterization of binary neutron star accretion discs

Accretion disks formed in binary neutron star mergers play a central role in many astrophysical processes of interest, including the launching of relativistic jets or the ejection of neutron-rich matter hosting heavy element nucleosynthesis. In this work we analyze in detail the properties of accretion disks from 44 ab initio binary neutron star merger simulations for a large set of nuclear equations of state, binary mass ratios, and remnant fates, with the aim of furnishing reliable initial conditions for disk simulations and a comprehensive characterization of their properties. We find that the disks have a significant thermal support, with an aspect ratio decreasing with the mass ratio of the binary from ~0.7 to 0.3. Even if the disk sample spans a broad range in mass and angular momentum, their ratio is independent from the equation of state and from the mass ratio. This can be traced back to the rotational profile of the disk, characterized by a constant specific angular momentum (as opposed to a Keplerian one) of 3 – 5×10 16 cm 2 s –1 . The profiles of the entropy per baryon and of the electron fraction depend on the mass ratio of the binary. For more symmetric binaries, they follow a sigmoidal distribution as a function of the rest mass density, for which we provide a detailed description and a fit. Furthermore, the disk properties discussed in this work can be used as a robust set of initial conditions for future long-term simulations of accretion disks from binary neutron star mergers, posing the basis for progress in the quantitative study of the outflow properties.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1997

Rotordynamics on the PC: Further Capabilities of ARDS

Rotordynamics codes for personal computers are now becoming available. One of the most capable codes is Analysis of RotorDynamic Systems (ARDS) which uses the component mode synthesis method to analyze a system of up to 5 rotating shafts. ARDS was originally written for a mainframe computer but has been successfully ported to a PC; its basic capabilities for steady-state and transient analysis were reported in an earlier paper. Additional functions have now been added to the PC version of ARDS. These functions include: 1) Estimation of the peak response following blade loss without resorting to a full transient analysis; 2) Calculation of response sensitivity to input parameters; 3) Formulation of optimum rotor and damper designs to place critical speeds in desirable ranges or minimize bearing loads; 4) Production of Poincard plots so the presence of chaotic motion can be ascertained. ARDS produces printed and plotted output. The executable code uses the full array sizes of the mainframe version and fits on a high density floppy disc. Examples of all program capabilities are presented and discussed.

Fleming, David P.↗
DOE OSTI2022

Abundance analysis of APOGEE spectra for 58 metal-poor stars from the bulge spheroid

The central part of the Galaxy hosts a multitude of stellar populations, including the spheroidal bulge stars, stars moved to the bulge through secular evolution of the bar, inner halo, inner thick disc, inner thin disc, as well as debris from past accretion events. We identified a sample of 58 candidate stars belonging to the stellar population of the spheroidal bulge, and analyse their abundances. The present calculations of Mg, Ca, and Si lines are in agreement with the ASPCAP abundances, whereas abundances of C, N, O, and Ce are re-examined. We find normal α-element enhancements in oxygen, similar to magnesium, Si, and Ca abundances, which are typical of other bulge stars surveyed in the optical in Baade’s Window. The enhancement of [O/Fe] in these stars suggests that they do not belong to accreted debris. No spread in N abundances is found, and none of the sample stars is N-rich, indicating that these stars are not second generation stars originated in globular clusters. Ce instead is enhanced in the sample stars, which points to an s-process origin such as due to enrichment from early generations of massive fast rotating stars, the so-called spinstars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

TOI–757 b: an eccentric transiting mini–Neptune on a 17.5–d orbit

ABSTRACT We report the spectroscopic confirmation and fundamental properties of TOI$-$757 b, a mini$-$Neptune on a 17.5$-$d orbit transiting a bright star ($V\, =\, 9.7$ mag) discovered by the TESS mission. We acquired high$-$precision radial velocity measurements with the HARPS, ESPRESSO, and PFS spectrographs to confirm the planet detection and determine its mass. We also acquired space$-$borne transit photometry with the CHEOPS space telescope to place stronger constraints on the planet radius, supported with ground$-$based LCOGT photometry. WASP and KELT photometry were used to help constrain the stellar rotation period. We also determined the fundamental parameters of the host star. We find that TOI$-$757 b has a radius of $R_{\mathrm{p}} = 2.5 \pm 0.1 R_{\oplus }$ and a mass of $M_{\mathrm{p}} = 10.5^{+2.2}_{-2.1} M_{\oplus }$, implying a bulk density of $\rho _{\text{p}} = 3.6 \pm 0.8$ g cm$^{-3}$. Our internal composition modelling was unable to constrain the composition of TOI$-$757 b, highlighting the importance of atmospheric observations for the system. We also find the planet to be highly eccentric with e = 0.39$^{+0.08}_{-0.07}$, making it one of the very few highly eccentric planets among precisely characterized mini$-$Neptunes. Based on comparisons to other similar eccentric systems, we find a likely scenario for TOI$-$757 b’s formation to be high eccentricity migration due to a distant outer companion. We additionally propose the possibility of a more intrinsic explanation for the high eccentricity due to star$-$star interactions during the earlier epoch of the Galactic disc formation, given the low metallicity and older age of TOI$-$757.

Alqasim, A. (ORCID:0000000151025505)↗
DOE OSTI2021

The antesonic condition for the explosion of core-collapse supernovae – II. Rotation and turbulence

In the problem of steady free fall on to a standing shockwave around a central mass, the ‘antesonic’ condition limits the regime of stable accretion to $c_T^2/v_\mathrm{esc}^2\le 3/16$, where cT is the isothermal sound speed in the subsonic post-shock flow, and vesc is the escape velocity at the shock radius. Above this limit, it is impossible to satisfy both the Euler equation and the shock jump conditions, and the system transitions to a wind. This physics explains the existence of a critical neutrino luminosity in steady-state models of accretion in the context of core-collapse supernovae. Here, we extend the antesonic condition to flows with rotation and turbulence using a simple one-dimensional formalism. Both effects decrease the critical post-shock sound speed required for explosion. While quite rapid rotation is required for a significant change to the critical condition, we show that the level of turbulence typically achieved in supernova simulations can greatly impact the critical value of $c_T^2/v_\mathrm{esc}^2$. A core angular velocity corresponding to a millisecond rotation period after contraction of the proto-neutron star results in only a ~5 percent reduction of the critical curve. In contrast, near-sonic turbulence with specific turbulent kinetic energy $K/c_T^2=0.5-1$, leads to a decrease in the critical value of $c_T^2/v_{\rm esc}^2$ by ~20 to 40 percent. This analysis provides a framework for understanding the role of post-shock turbulence in instigating explosions in models that would otherwise fail and helps explain why multidimensional simulations explode more easily than their one-dimensional counterparts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Laser Plasma Interaction in the MG Magnetic Field (Final Report)

Strong magnetic fields change properties of plasma. Employment of the magnetic fields can improve conditions for inertial confinement fusion. Compression and heating of the magnetized plasma is a base of the MagLIF pulsed power approach to the controlled fusion. Study of expansion and heating of plasma in the external magnetic fields, development of plasma instabilities, parametric and other effects are important for basic physics and applications. The main goal of the research for the grant was experimental investigation of laser produced plasma in the well characterized and controlled MG magnetic fields. We developed a platform for investigation of high intensity laser-plasma interaction (LPI) in the MG fields using a university-scale pulsed power machine. A Zebra machine at UNR generated transverse magnetic fields of 3 MG on the surface of the rod load and longitudinal fields of 1.4 MG in the coil loads. The magnetic fields were characterized with two-color Faraday rotation diagnostics. The pulsed power machine provided almost static magnetic fields for LPI compared to the much faster laser driven magnetic fields. We found that eddy currents in the rising magnetic field generate plasma on the metal targets. Eddy currents did not impact Si and CH dielectric targets. A Leopard laser with intensity in the focus up to 10 19 W/cm 2 produced plasma in the MG magnetic fields. The modified reflected Faraday diagnostics was used to study laser driven B-field at the MTW laser at Laboratory for Laser Energetics, UR. We demonstrated a slow dependence of the magnetic field in the coil on the applied laser intensity. The magnetic field increased by a factor of 2 if laser intensity increased by a factor of 30. This scaling is important for comparison of experiments at different laser facilities. Expansion of the plasma in the 2-3 MG external B-field was studied. Laser-produced plasma in the azimuthal magnetic field took the unique form of a thin disc expanding radially with a velocity of 250 km/s and confined in the vertical direction. A HYDRA MHD program at the University of Rochester was applied for simulations of LPI in the magnetic field B >3 MG. Simulations for the plasma disc parameters and the expansion dynamics were in a good agreement with experiments. Generation of narrow dense plasma jets in the longitudinal magnetic field of 0.6-0.8 MG was studied. Narrow plasma jets reached a length of 3-4 mm with the electron plasma density of (0.2-1.2)x10 20 cm -3 . A jet tip propagated with the velocity of 160-200 km/s. MHD simulations showed a good agreement of the dynamics of the formation of plasma jets with experiments. These jets are relevant to astrophysical jets. Simulations of K-shell spectra of Si plasma was performed for LPI in the B-field. The laser prepulse generated plasma near the laser target. A PrismSPECT model with a MeV electron beam produced by the laser was used. The spectral modelling showed the increased plasma density by a factor by 2-3 in the magnetic field. This was in agreement with the observed dynamics of the plasma plume confined by the axial magnetic field. The two-plasmon decay was studied in the 2.5-3 MG transversal magnetic fields. Strong 2-3.5 nm spectral widening and a 2-4 nm shifts of “red” and “blue” 3/2ω 0 spectral components were observed. The large shift and widening exceed the expected temperature and magnetic shift. PIC simulations are performing to clarify physics of this effect. The experimental research program for the grant is completed. New plasma effects in the MG fields were studied at the university-scale pulsed power generator. Two graduate and two undergraduate UNR and UR students carried experiments at the Zebra generator, supported and developed plasma diagnostics, provided data processing, and performed MHD simulations of LPI in the strong magnetic field. Research results are published in 9 referred papers and presented in 12 conferences. Program manager: Kramer U. Akli; Collaborators: R. C. Mancini and H. Sawada, University of Nevada, Reno (UNR); R. Betti and A. V. Maximov, University of Rochester (UR).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1995

Simulation of rotor blade element turbulence

A piloted, motion-based simulation of Sikorsky's Black Hawk helicopter was used as a platform for the investigation of rotorcraft responses to vertical turbulence. By using an innovative temporal and geometrical distribution algorithm that preserved the statistical characteristics of the turbulence over the rotor disc, stochastic velocity components were applied at each of twenty blade-element stations. This model was implemented on NASA Ames' Vertical Motion Simulator (VMS), and ten test pilots were used to establish that the model created realistic cues. The objectives of this research included the establishment of a simulation-technology basis for future investigation into real-time turbulence modeling. This goal was achieved; our extensive additions to the rotor model added less than a 10 percent computational overhead. Using a VAX 9000 computer the entire simulation required a cycle time of less than 12 msec. Pilot opinion during this simulation was generally quite favorable. For low speed flight the consensus was that SORBET (acronym for title) was better than the conventional body-fixed model, which was used for comparison purposes, and was determined to be too violent (like a washboard). For high speed flight the pilots could not identify differences between these models. These opinions were something of a surprise because only the vertical turbulence component on the rotor system was implemented in SORBET. Because of the finite-element distribution of the inputs, induced outputs were observed in all translational and rotational axes. Extensive post-simulation spectral analyses of the SORBET model suggest that proper rotorcraft turbulence modeling requires that vertical atmospheric disturbances not be superimposed at the vehicle center of gravity but, rather, be input into the rotor system, where the rotor-to-body transfer function severely attenuates high frequency rotorcraft responses.

Mcfarland, R. E.↗
DOE OSTI2022

The physical connection between central stellar surface density and stellar spin in SAMI and MaNGA nearby galaxies

The stellar surface density within the inner 1 kpc (Σ 1 ) has become a popular tool for understanding the growth of galaxies and its connection with the quenching of star formation. The emerging picture suggests that building a central dense core is a necessary condition for quenching. However, it is not clear whether changes in Σ 1 trace changes in stellar kinematics and the growth of dispersion-dominated bulges. In this paper, we combine imaging from the Sloan Digital Sky Survey with stellar kinematics from the Sydney-AAO Multi-object Integral-field unit and Mapping Nearby Galaxies at Apache Point Observatory surveys to quantify the correlation between Σ 1 and the proxy for stellar spin parameter within one effective radius (λ re ) for 1599 nearby galaxies. We show that, on the star-forming main sequence and at fixed stellar mass, changes in Σ 1 are mirrored by changes in λ re . While forming stars, main-sequence galaxies remain rotationally-dominated systems, with their Σ 1 increasing but their stellar spin staying either constant or slightly increasing. The picture changes below the main sequence, where Σ 1 and λ re are no longer correlated. Passive systems show a narrower range of Σ 1 , but a wider range of λre compared to star-forming galaxies. Our results indicate that, from a structural point of view, passive galaxies are a more heterogeneous population than star-forming systems, and may have followed a variety of evolutionary paths. This also suggests that, if dispersion-dominated bulges still grow significantly at z ~ 0, this generally takes place during, or after, the quenching phase.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2022

MAXI J1957+032: A New Accreting Millisecond X-ray Pulsar in an Ultra-Compact Binary

The detection of coherent X-ray pulsations at ∼314 Hz (3.2 ms) classifies MAXI J1957+032 as a fast-rotating, accreting neutron star. We present the temporal and spectral analysis performed using NICER observations collected during the latest outburst of the source. Doppler modulation of the X-ray pulsation revealed the ultra-compact nature of the binary system characterized by an orbital period of ∼1 h and a projected semimajor axis of 14 lt-ms. The neutron star binary mass function suggests a minimum donor mass of 1.7 × 10 −2 M ⊙ , assuming a neutron star mass of 1.4 M ⊙ and a binary inclination angle lower than 60 deg. This assumption is supported by the lack of eclipses or dips in the X-ray light curve of the source. We characterized the 0.5–10 keV energy spectrum of the source in outburst as the superposition of a relatively cold black-body-like thermal emission compatible with the emission from the neutron star surface and a Comptonization component with photon index consistent with a typical hard state. We did not find evidence for iron K α lines or reflection components.

X-rays:binaries↗