Search NASA⌕ Search

SEARCH · Search NASA

Results for “selective transformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

A survey of laser and selected optical systems for remote measurement of pollutant gas concentrations

Applications of the Differential Absorption Lidar (DIAL) technique to the remote sensing of pollutant gases are surveyed. In the DIAl technique, the differential absorption of two laser beams reflected back to a receiver from a target determines the concentration of the gas being studied. The types of instruments available are considered in detail: dye lidar (to measure nitrogen dioxide, sulfur dioxide, and ozone); carbon dioxide laser (for ozone, ethylene, ammonia, and hydrazine), helium-neon laser (for methane); hydrogen fluoride laser (for HF); and tunable diode laser (for nitric oxide and carbon monoxide). DIAL instruments are compared with other optical remote sensors such as Fourier-transform infrared spectrometers, correlation spectrometers (COSPEC and GASPEC), and grating spectrometers; and criteria for the selection of an appropriate gas measuring system are suggested. Laser and other optical remote sensors are found to be cost effective in many cases, despite the fact that they are more costly than point-monitoring systems.

Grant, W. B.↗
NASA NTRS2003

Developing a MATLAB(registered)-Based Tool for Visualization and Transformation

An important step in the structural design and development of spacecraft is the experimental identification of a structure s modal characteristics, such as its natural frequencies and modes of vibration. These characteristics are vital to developing a representative model of any given structure or analyzing the range of input frequencies that can be handled by a particular structure. When setting up such a representative model of a structure, careful measurements using precision equipment (such as accelerometers and instrumented hammers) must be made on many individual points of the structure in question. The coordinate location of each data point is used to construct a wireframe geometric model of the structure. Response measurements obtained from the accelerometers is used to generate the modal shapes of the particular structure. Graphically, this is displayed as a combination of the ways a structure will ideally respond to a specified force input. Two types of models of the tested structure are often used in modal analysis: an analytic model showing expected behavior of the structure, and an experimental model showing measured results due to observed phenomena. To evaluate the results from the experimental model, a comparison of analytic and experimental results must be made between the two models. However, comparisons between these two models become difficult when the two coordinate orientations differ in a manner such that results are displayed in an unclear fashion. Such a problem proposes the need for a tool that not only communicates a graphical image of a structure s wireframe geometry based on various measurement locations (called nodes), but also allows for a type of transformation of the image s coordinate geometry so that a model s coordinate orientation is made to match the orientation of another model. Such a tool should also be designed so that it is able to construct coordinate geometry based on many different listings of node locations and is able to transform the wireframe coordinate orientation to match almost any possible orientation (i.e. it should not be a problem specific application) if it is to be of much value in modal analysis. Also, since universal files are used to store modal parameters and wireframe geometry, the tool must be able to read and extract information from universal files and use these files to exchange model data.The purpose of this project is to develop such a tool as a computer graphical user interface (GUI) capable of performing the following tasks: 1) Browsing for a particular universal file within the computer directory and displaying the name of this file to the screen; 2) Plotting each of the nodes within the universal file in a useful, descriptive, and easily understood figure; 3) Reading the node numbers from the selected file and listing these node numbers to the user for selection in an easily accessible format; 4) Allowing for user selection of a new model orientation defined by three selected nodes; and 5) Allowing the user to specify a directory to which the transformed model s node locations will be saved, and saving the transformed node locations to the specified file.

Anderton, Blake J.↗
NASA NTRS2009

Sequential Principal Component Analysis -An Optimal and Hardware-Implementable Transform for Image Compression

This paper presents the JPL-developed Sequential Principal Component Analysis (SPCA) algorithm for feature extraction / image compression, based on "dominant-term selection" unsupervised learning technique that requires an order-of-magnitude lesser computation and has simpler architecture compared to the state of the art gradient-descent techniques. This algorithm is inherently amenable to a compact, low power and high speed VLSI hardware embodiment. The paper compares the lossless image compression performance of the JPL's SPCA algorithm with the state of the art JPEG2000, widely used due to its simplified hardware implementability. JPEG2000 is not an optimal data compression technique because of its fixed transform characteristics, regardless of its data structure. On the other hand, conventional Principal Component Analysis based transform (PCA-transform) is a data-dependent-structure transform. However, it is not easy to implement the PCA in compact VLSI hardware, due to its highly computational and architectural complexity. In contrast, the JPL's "dominant-term selection" SPCA algorithm allows, for the first time, a compact, low-power hardware implementation of the powerful PCA algorithm. This paper presents a direct comparison of the JPL's SPCA versus JPEG2000, incorporating the Huffman and arithmetic coding for completeness of the data compression operation. The simulation results show that JPL's SPCA algorithm is superior as an optimal data-dependent-transform over the state of the art JPEG2000. When implemented in hardware, this technique is projected to be ideally suited to future NASA missions for autonomous on-board image data processing to improve the bandwidth of communication.

Duong, Tuan A.↗
NASA NTRS2003

Flight Investigation of Prescribed Simultaneous Independent Surface Excitations for Real-Time Parameter Identification

Near real-time stability and control derivative extraction is required to support flight demonstration of Intelligent Flight Control System (IFCS) concepts being developed by NASA, academia, and industry. Traditionally, flight maneuvers would be designed and flown to obtain stability and control derivative estimates using a postflight analysis technique. The goal of the IFCS concept is to be able to modify the control laws in real time for an aircraft that has been damaged in flight. In some IFCS implementations, real-time parameter identification (PID) of the stability and control derivatives of the damaged aircraft is necessary for successfully reconfiguring the control system. This report investigates the usefulness of Prescribed Simultaneous Independent Surface Excitations (PreSISE) to provide data for rapidly obtaining estimates of the stability and control derivatives. Flight test data were analyzed using both equation-error and output-error PID techniques. The equation-error PID technique is known as Fourier Transform Regression (FTR) and is a frequency-domain real-time implementation. Selected results were compared with a time-domain output-error technique. The real-time equation-error technique combined with the PreSISE maneuvers provided excellent derivative estimation in the longitudinal axis. However, the PreSISE maneuvers as presently defined were not adequate for accurate estimation of the lateral-directional derivatives.

Moes, Timothy R.↗
NASA NTRS2010

Estimation of Signal Coherence Threshold and Concealed Spectral Lines Applied to Detection of Turbofan Engine Combustion Noise

Combustion noise from turbofan engines has become important, as the noise from sources like the fan and jet are reduced. An aligned and un-aligned coherence technique has been developed to determine a threshold level for the coherence and thereby help to separate the coherent combustion noise source from other noise sources measured with far-field microphones. This method is compared with a statistics based coherence threshold estimation method. In addition, the un-aligned coherence procedure at the same time also reveals periodicities, spectral lines, and undamped sinusoids hidden by broadband turbofan engine noise. In calculating the coherence threshold using a statistical method, one may use either the number of independent records or a larger number corresponding to the number of overlapped records used to create the average. Using data from a turbofan engine and a simulation this paper shows that applying the Fisher z-transform to the un-aligned coherence can aid in making the proper selection of samples and produce a reasonable statistics based coherence threshold. Examples are presented showing that the underlying tonal and coherent broad band structure which is buried under random broadband noise and jet noise can be determined. The method also shows the possible presence of indirect combustion noise. Copyright 2011 Acoustical Society of America. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the Acoustical Society of America.

Miles, Jeffrey Hilton↗
NASA NTRS1984

Development of a quantitative basis for selection of spectral features in a vegetation monitoring system

The development of an objective methodology for evaluation of alternative Landsat data preprocessing options, spectral transform features for monitoring vegetation, and feature summarization algorithms is presented. Based on estimates of spectral separability between a target class and its confusion classes, analysis of variance techniques are used to evaluate potential design options for large scale vegetation monitoring systems. Case studies are presented for early season and through the season spring small grains separation and for barley/other spring small grains separation. It is concluded that a basis for efficient, objective selection among alternative feature extraction approaches has been established for the large scale vegetation mapping/inventory problem. Although the approach has been demonstrated for the unitemporal class separability case, extensions to the multitemporal case are under development.

Phinney, D. E.↗
NASA NTRS1975

A counter example in linear feature selection theory

The linear feature selection problem in multi-class pattern recognition is described as that of linearly transforming statistical information from n-dimensional (real Euclidean) space into k-dimensional space, while requiring that average interclass divergence in the transformed space decrease as little as possible. Divergence is the expected interclass divergence derived from Hajek two-class divergence; it is known that there always exists a k x n matrix B such that the transformation determined by B maximizes the divergence in k-dimensional space. It is known that, if Q is any k x k invertible matrix, and B is as defined above, then QB again maximizes the divergence in k-space. It is shown that the converse of this result is false: two matrices exist, B sub 1 and B sub 2, each of which maximizes transformed divergence, which are not related in the fashion B sub 2 = QB sub 1 for any k x k matrix Q.

Brown, D. R.↗
NASA NTRS1991

Fuel Systems Architecture (FSA) evaluation criteria and concept evaluation methodology

Consideration is given to two methods developed for the evaluation, screening, and ranking of concepts for Space Exploration Initiative vehicle propellant management systems. The methods selected for handling this multicriteria decision problem are based on the utility theory which transforms both qualitative and quantitative criteria into a nondimensional utility scale for comparison of dissimilar figures of merit. The development of the resultant FSA evaluation criteria and concept evaluation methodology is summarized.

Hendershot, J. E.↗
NASA NTRS1999

On the Oxidative Degradation of Nadic End-Capped Polyimides: Synthesis and Characterization of Model Compounds for End-Cap Degradation Products - 3

The oxidative degradation of PMR (for polymerization of monomeric reactants) polyimides at elevated temperatures was followed by cross-polarized magic angle spinning (CP-MAS) NMR. Labeling of selected sites in the polymers with C-13 allowed for direct observation of the transformations arising from oxidation processes. The formation of several degradation products has been proposed to be occurring in the cross-links derived from the nadic end caps on oxidation. Model compounds have been synthesized and characterized by CPMAS NMR with both normal and delayed decoupling to distinguish between protonated and unprotonated carbons. Comparison of these spectra to predicted chemical shifts of proposed products for the aged polymer provides further insight to degradation occurring in the cross-linked moieties.

Meador, Mary Ann B.↗
NASA NTRS2012

Object-Oriented Bayesian Networks (OOBN) for Aviation Accident Modeling and Technology Portfolio Impact Assessment

The concern for reducing aviation safety risk is rising as the National Airspace System in the United States transforms to the Next Generation Air Transportation System (NextGen). The NASA Aviation Safety Program is committed to developing an effective aviation safety technology portfolio to meet the challenges of this transformation and to mitigate relevant safety risks. The paper focuses on the reasoning of selecting Object-Oriented Bayesian Networks (OOBN) as the technique and commercial software for the accident modeling and portfolio assessment. To illustrate the benefits of OOBN in a large and complex aviation accident model, the in-flight Loss-of-Control Accident Framework (LOCAF) constructed as an influence diagram is presented. An OOBN approach not only simplifies construction and maintenance of complex causal networks for the modelers, but also offers a well-organized hierarchical network that is easier for decision makers to exploit the model examining the effectiveness of risk mitigation strategies through technology insertions.

Shih, Ann T.↗
NASA NTRS1967

Report 2: First Application of the Successive Transformation Method

Report 1 of these studies described a basic method for predicting lunar surface temperatures, using readings recorded by Surveyor I and extrapolating to obtain surface temperatures in other selected areas. The areas selected were those considered as potential Apollo landing sites. This second report indicates that the temperature isotherms are directly related to the topographical profile of the surface areas they cover. If, after further observations by Surveyor 11, it becomes evident that the "Successive Transformation Method" provides accurate temperature data, this technique would become a valuable tool for charting the profile of any remote surface where manned spacecraft could be landed.

Rojas, Hector R.↗
NASA NTRS1987

Shuttle computational grid generation

The well known Karman-Trefftz conformal transformation, consisting of repeated applications of the same basic formula, were found to be quite successful to body, wing, and wing-body cross sections. This grid generation technique is extended to cross sections of more complex forms, and also more automatic. Computer programs were written for the selection of hinge points on cross section with angular shapes, the Karman-Trefftz tranformation of arbitrary shapes, and the special transform of hinge point on the imaginary axis. A feasibility study is performed for the future application of conformal mapping grid generation to complex three dimensional configurations. Examples such as Orbiter vehicle section and a few others were used.

Ing, Chang↗
NASA NTRS1982

Unequal-Split Strip-Line Power Divider

Simple technique for designing strip-line or microstrip power dividers can be used for unequal, but inphase power split. Technique allows power splits ranging from equal to as large as required, with advantage of using same line impedances and line spacings for all splits. Output power ratio is determined by selecting location of input port in manner analogous to tap point for electric-power transformer.

Bailey, M. C.↗
NASA NTRS1994

Scattering From A Thick Dichroic Microwave Reflector

Thick Frequency Selective Surface with Rectangular Apertures, TFSSRA, computer program developed to calculate scattering parameters of thick frequency-selective surface with rectangular apertures on skew grid at oblique angle of incidence. Integral equation transformed into matrix equation, which is then solved. Written in FORTRAN 77 with single precision.

Chen, Jacqueline C.↗
NASA NTRS1994

Measurements of striae in CR+ doped YAG laser crystals

Striations in Czochralski (CZ) grown crystals have been observed in materials such as GaAs, silicon, photorefractive crystals used for data storage, potassium titanyl phosphate crystals and LiNbO3. Several techniques have been used for investigating these defects including electron microscopy, laser scanning tomography, selective photoetching, X-ray diffuse scattering, interference orthoscopy, laser interferometry and micro-Fourier transform infrared spectroscopy mapping. A 2mm thick sample of the material to be investigated is illuminated with light that is absorbed and non-absorbed by the ion concentration to be observed. The back surface of the sample is focused onto a solid-state image detector and images of the input beam and absorbed (and diffracted) beams are captured at two wavelengths. The variation of the coefficient of absorption asa function of distance on the sample can be derived from these measurements. A Big Sky Software Beamcode system is used to capture and display images. Software has been written to convert the Beamcode data files to a format that can be imported into a spreadsheet program such as Quatro Pro. The spreadsheet is then used to manipulate and display data. A model of the intensity map of the striae collected by the imaging system has been proposed and a data analysis procedure derived. From this, the variability of the attenuation coefficient alpha can be generated. Preliminary results show that alpha may vary by a factor of four or five over distances of 100 mu m. Potential errors and problems have been discovered and additional experiments and improvements to the experimental setup are in progress and we must now show that the measurement techniques and data analysis procedures provide 'real' information. Striae are clearly visible at all wavelengths including white light. Their basic spatial frequency does not change radically, at least when changing from blue to green to white light. Further experimental and theoretical work can be done to improve the data collection techniques and to verify the data analysis procedures.

Cady, Fredrick M.↗
NASA NTRS1995

Analysis/Design Tool

Excelerator II, developed by INTERSOLV, Inc., provides a complete environment for rules-based expert systems. The software incorporates NASA's C Language Integrated Production System (CLIPS), a shell for constructing expert systems. Excelerator II provides complex verification and transformation routines based on matching that is simple and inexpensive. *Excelerator II was sold to SELECT Software Tools in June 1997 and is now called SELECT Excelerator. SELECT has assumed full support and maintenance for the product line.

Source record↗
NASA NTRS2011

Geopotential Field Anomaly Continuation with Multi-Altitude Observations

Conventional gravity and magnetic anomaly continuation invokes the standard Poisson boundary condition of a zero anomaly at an infinite vertical distance from the observation surface. This simple continuation is limited, however, where multiple altitude slices of the anomaly field have been observed. Increasingly, areas are becoming available constrained by multiple boundary conditions from surface, airborne, and satellite surveys. This paper describes the implementation of continuation with multi-altitude boundary conditions in Cartesian and spherical coordinates and investigates the advantages and limitations of these applications. Continuations by EPS (Equivalent Point Source) inversion and the FT (Fourier Transform), as well as by SCHA (Spherical Cap Harmonic Analysis) are considered. These methods were selected because they are especially well suited for analyzing multi-altitude data over finite patches of the earth such as covered by the ADMAP database. In general, continuations constrained by multi-altitude data surfaces are invariably superior to those constrained by a single altitude data surface due to anomaly measurement errors and the non-uniqueness of continuation.

Kim, Jeong Woo↗
NASA NTRS2012

Geopotential Field Anomaly Continuation with Multi-Altitude Observations

Conventional gravity and magnetic anomaly continuation invokes the standard Poisson boundary condition of a zero anomaly at an infinite vertical distance from the observation surface. This simple continuation is limited, however, where multiple altitude slices of the anomaly field have been observed. Increasingly, areas are becoming available constrained by multiple boundary conditions from surface, airborne, and satellite surveys. This paper describes the implementation of continuation with multi-altitude boundary conditions in Cartesian and spherical coordinates and investigates the advantages and limitations of these applications. Continuations by EPS (Equivalent Point Source) inversion and the FT (Fourier Transform), as well as by SCHA (Spherical Cap Harmonic Analysis) are considered. These methods were selected because they are especially well suited for analyzing multi-altitude data over finite patches of the earth such as covered by the ADMAP database. In general, continuations constrained by multi-altitude data surfaces are invariably superior to those constrained by a single altitude data surface due to anomaly measurement errors and the non-uniqueness of continuation.

Kim, Jeong Woo↗