Search NASA⌕ Search

SEARCH · Search NASA

Results for “shells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Unraveling electrochemo-mechanical aspects of core–shell composite cathode for sulfide based all-solid-state batteries

All-solid-state lithium batteries (ASSLBs) are emerging as promising next-generation batteries for electric vehicles owing to their high energy densities and safety features. However, challenges such as inadequate material percolation and low cathode utilization often hinder their potential. This paper presents a core–shell approach to optimize the cathode active material (CAM) utilization. The resultant CAM composite showed high ionic conductivity, a highly dense microstructure with <10% porosity, and minimal stack pressure changes during electrochemical cycling. The maximum CAM utilization was achieved while effectively mitigating electrochemo-mechanical side reactions by applying a uniformly coated Li 6 PS 5 Cl solid electrolyte layer (≈500 nm) and a LiNbO 3 buffer layer (≈10 nm) onto LiNi 0.8 Mn 0.1 Co 0.1 O 2 particles (LPSCl@LNO@NMC). The engineered LPSCl@LNO@NMC composites, which incorporated a 5 wt% LPSCl coating on LNO@NMC powders, exhibited a dense microstructure that enhanced the mechanical stability at the cathode. Sulfide-based solid electrolyte (SSE)/SSE contact provided better ionic pathways within the composite and increased CAM utilization. Thus, an enhanced reversible capacity (197 mA h g -1 ) and exceptional high-rate cycling performance (86.3% capacity retention after 1000 cycles at 2C) were observed. These findings pave the way for the advancement and commercialization of high-performance ASSLBs.

25 ENERGY STORAGE↗
DOE OSTI2024

Effects of drive pulse shape on graded metal pushered single shell capsule implosions on the National Ignition Facility

Graded metal pushered single shells (PSS) are a viable alternative to low-Z capsules (Z is the atomic number) for indirect drive inertial confinement fusion implosions due to enhanced core tamping and radiation trapping, but they can be compromised by the pusher mixing with the fuel. We compare 2-shock and 3-shock laser pulses for Be/Cr PSS capsules filled with deuterium–tritium gas fuel at 6 mg/cc density. 1D radiation-hydrodynamic simulations predict higher core compression and, hence, ∼2× higher fusion yield for the 3-shock drive than for 2-shock. Nevertheless, we observe similar core ion temperatures and fusion yields for both drives. The implosion burn duration is 25% shorter and the core volume is ∼2.5× smaller for the 3-shock drive than for 2-shock, consistent with a higher compression. 1D LASNEX mix simulations using a buoyancy-drag model matching the measured yields also agree with the observed core sizes and burn durations and suggest ∼40% and ∼70% yield degradations for 2-shock and 3-shock drives due to hydrodynamic instabilities and atomic mix at the pusher–fuel interface. At the same time, 2D HYDRA simulations show that mid-mode (2–250) instability degradations are negligible for the 2-shock implosion (9%) and significant (45%) for 3-shock. Subtracting these from the 1D mix simulations, we infer similar degradations from high-mode instabilities and atomic mix for both drives. Due to its robustness to mid-mode instabilities, future pusher–gas mix studies will use the 2-shock drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Mitigation of hot-electron preheat from the two-plasmon-decay instability using silicon-doped plastic shells in direct-drive implosions on OMEGA

Hot electrons generated by the two-plasmon-decay (TPD) instability in laser-direct-drive implosions preheat the fuel and degrade performance. The mitigation of preheat using silicon-doped ablators (i.e., preheat is reduced by a factor of 1.40 ± 0.04) while decreasing the ratio of the laser spot diameter to the target diameter (⁠R b /R t⁠ ) to mitigate cross-beam energy transfer has been demonstrated on the OMEGA laser for quarter-critical laser intensities of 4.1 x 10 14 W/cm 2 ⁠, equivalent to an incident laser intensity of 8.3 x 10 14 W/cm 2 ⁠. The silicon dopant increases the electron temperature of the ablation plasma, which raises the intensity threshold for the onset of the TPD instability. These results show that implosion designs utilizing higher drive intensities can be used to achieve higher shell velocities, which are currently inaccessible with plastic ablators due to excessive preheat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Multi-Fidelity Bayesian Optimization with Gaussian Processes for Double Shell Inertial Confinement Fusion Target Design

Reliable, secure access to energy is a major focus for national security efforts. One potential route to such energy is through fusion reactions in inertial confinement fusion (ICF) experiments. Such experiments are carried out at facilities such as the National Ignition Facility (NIF) in Livermore, California, where high powered lasers are used to compress a DT fuel-containing target to the necessary high temperature, high pressure conditions. These experiments are limited in number, which creates a heavy dependence on high fidelity predictive physics simulations and analysis performed “pre shot,” or before the experiment occurs. Many of these simulations in higher dimensions (2D and 3D) are computationally expensive, so finding optimal simulation-based designs presents its own challenges. In this work, we present our multi-fidelity Bayesian optimization with Gaussian processes (GPs) for ICF double shell targets, where a 1D surrogate model is used to help find a 2D surrogate model, enabling us to find optimal targets in the higher fidelity (2D), while saving computational cost.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Two-component atomic Fermi superfluid with spin-orbital coupling in thin-spherical-shell geometry

We present a theory of two-component atomic Fermi superfluid with tunable pairing interaction in a thin spherical shell subject to spin-orbit coupling (SOC). By incorporating SOC into the Fermi superfluid in the BCS-Bose Einstein condensation (BEC) crossover, we obtain the energy spectrum and equations of state. While the order parameter and chemical potential are suppressed by SOC on the BCS side, the former remains positive but the latter may be pushed to negative values by SOC.Meanwhile, the compressibility exhibits kinks as the pairing interaction or SOC varies, indicating singular behavior of higher derivatives of the free energy despite the presence of the superfluid order parameter. The minimum of the energy dispersion indicates a decoupling of the energy gap from the order parameter, and the compressibility kinks occur when the energy gap approaches 0. We found the particle-hole mixing in the Fermi superfluid essential for the compressibility kinks since a Fermi gas with the same SOC but no pairing interaction only exhibits complicated dispersions but no singular behavior. Therefore, our results show that a combination of superfluid, SOC, and geometry can lead to interesting phenomena. Here, we also discuss possible experimental realizations and implications.

Fermi gases↗
DOE OSTI2024

Momentum shift and on-shell recursion relation for electroweak theory

We study the all-line transverse (ALT) shift which we developed for on-shell recursion of amplitudes for particles of any mass. We discuss the validity of the shift for general theories of spin ≤1, and illustrate the connection between Ward identity and constructibility for massive spin-1 amplitude under the ALT shift. We apply the shift to the electroweak theory, and various four-point scattering amplitudes among electroweak gauge bosons and fermions are constructed. We show explicitly that the four-point gauge boson contact terms in massive electroweak theory automatically arise after recursive construction, independent of UV completion, and they automatically cancel the terms growing as (energy) 4 at high energy. We explore UV completion of the electroweak theory that cancels the remaining (energy) 2 terms and impose unitarity requirements to constrain additional couplings. The ALT shift framework allows consistent treatment in dealing with contact term ambiguities for renormalizable massive and massless theories, which we show can be useful in studying real-world amplitudes with massive spinors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Probing Exotic Cross-Shell Interactions at N = 28 with Single-Neutron Transfer on 47 K

Here, we present the first measurement of the 47 K ⁡(𝑑, 𝑝⁢𝛾)⁢ 48 K transfer reaction, performed in inverse kinematics using a reaccelerated beam of 47 K. The level scheme of 48 K has been greatly extended, with nine new bound excited states identified and spectroscopic factors deduced. Uniquely, the 47 K ⁡(𝑑, 𝑝) reaction gives access to nuclear states that are sensitive to the interaction of protons and neutrons in the widely spaced 1⁢𝑠 and 𝑓⁡𝑝 orbitals, respectively. Detailed comparisons with SDPF-U and SDPF-MU shell-model calculations reveal a number of discrepancies between theory and experiment. Intriguingly, a systematic overestimation of spectroscopic factors and a poor reproduction of the energies for 1 − states suggests that the mixing between the 𝜋⁢𝑠$^1_{1/2}$⁢𝑑$^4_{3/2}$ and 𝜋⁢𝑠$^2_{1/2}$⁢𝑑$^3_{3/2}$ proton configurations in 48 K is not correctly described using current interactions, challenging our description of light nuclei around the 𝑁 = 28 island of inversion.

Paxman, Charlie J. [Univ. of Surrey, Guildford (Un↗
DOE OSTI2025

Effect of competition of spherical and deformed shells in quasifission of superheavy nuclei

Quasifission and fusion-fission represent the two most likely reaction outcomes to occur postcapture in collisions leading to superheavy nuclei. As such, understanding these mechanisms and how they relate to one another is key to understanding the intricate dynamics that drive the formation (or dissociation) of the nascent compound nuclei formed in fusion reactions. This understanding directly translates to a more informed picture of suitable reaction partners and can provide vital information for experimental efforts to study the physics and chemistry of superheavy elements. In this work we report results from time-dependent simulations of 48 Ca + 238 U and 50 Ti + 236 Th reactions at incident energies just above the Coulomb barrier with a focus on the quasifission process that prevent the formation of a fully equilibrated 286 Cn compound nucleus. We study these reactions systematically and consider a wide range of initial configurations to extract a robust estimate of primary fragment yields for the quasifission process. Multiple preferred exit channels are observed, with both spherical and deformed shell effects in the heavy and light fragments driving contributions to the production yields depending on the initial configuration of the system. Orientation effects of the deformed actinide targets are found to be a primary driver of which exit channels are populated. Here, the impact of moving away from a doubly magic projectile is explored with implications towards the reactions considered for current and future superheavy searches.

Gumbel, Richard [Michigan State University, East L↗
DOE OSTI2025

High-precision Penning trap mass measurements of neutron-rich chlorine isotopes at the 𝑁 = 28 shell closure

Although it is known that the N = 28 spherical shell closure erodes, the strength of the closure with decreasing proton number Z < 20 is an open question in nuclear structure. Here, in this region of interest, high-precision mass measurements of neutron-rich 43-45 Cl isotopes were performed at the Low Energy Beam and Ion Trap (LEBIT) when coupled to the National Superconducting Cyclotron Lab. The resulting mass excesses (MEs) are ME(⁴³Cl) = -24114.4(1.7) keV, ME(⁴⁴Cl) = -20450.8(10.6) keV, and ME(⁴⁵Cl) = -18240.1(3.7) keV, and improve the uncertainty of these masses by up to a factor of ∼40 compared to the previous values reported in the 2020 Atomic Mass Evaluation. Comparison to ab initio calculations using the Valence-Space In-Medium Similarity Renormalization Group (VS-IMSRG) shows good agreement up to and including the closure.

Erington, H. [Michigan State Univ., East Lansing, ↗
DOE OSTI2025

Resonant structure of 18 Na and the N = 8 shell

The resonant structure of the proton-unbound nucleus 18 Na has been studied via knockout reactions of a 20 Mg beam on a 9 Be target. Three resonant states in 18 Na are identified through the invariant-mass reconstruction of 17 Ne+1⁢𝑝 events, including the 1$^−_1$ ground state with one-proton decay energy of 1.38(2) MeV. In comparison with the low-lying states in the mirror neutron-rich nucleus 18 N, the 1$^−_1$ ground state and 2$^−_1$ excited state with 𝜋⁢(1⁢𝑑 5/2 ) 3 ⊗ 𝜈⁢1⁢𝑝 1/2 configurations in 18 Na likely correspond to different proton seniorities, 𝜈=3 and 1, respectively, while the 0$^−_1$ and 1$^−_2$ states with 𝜋⁢(1⁢𝑑 5/2 ) 2⁢ (2⁢𝑠 1/2 ) ⊗ 𝜈⁢1⁢𝑝 1/2 configuration show obvious Thomas-Ehrman shifts. With the more-precise atomic mass of 18 Na, the one-neutron separation energy 𝑆𝑛⁡( 19 Na)=20.31⁢(2)⁢MeV is derived. Based on the systematics of the differences in experimental one-neutron separation energy in the isotopic chains from 𝑍=9 to 12, the shell effects at 𝑁=8 for proton-rich nuclei are discussed.

energy levels↗
DOE OSTI2024

Five-analyzer Johann spectrometer for hard X-ray photon-in/photon-out spectroscopy at the Inner Shell Spectroscopy beamline at NSLS-II: design, alignment and data acquisition

Here, a recently commissioned five-analyzer Johann spectrometer at the Inner Shell Spectroscopy beamline (8-ID) at the National Synchrotron Light Source II (NSLS-II) is presented. Designed for hard X-ray photon-in/photon-out spectroscopy, the spectrometer achieves a resolution in the 0.5–2 eV range, depending on the element and/or emission line, providing detailed insights into the local electronic and geometric structure of materials. It serves a diverse user community, including fields such as physical, chemical, biological, environmental and materials sciences. This article details the mechanical design, alignment procedures and data-acquisition scheme of the spectrometer, with a particular focus on the continuous asynchronous data-acquisition approach that significantly enhances experimental efficiency.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Abstract for CRADA between National Energy Technology Laboratory and Shell International Exploration & Production, Inc

Introducing CO₂ into geothermal systems as a working fluid in reservoirs can enhance geothermal conductivity, production, and pressure maintenance. A cross-disciplinary interaction of geothermal reservoir stimulation and CO₂ utilization satisfies renewable energy demands and operations that support sustainable energy infrastructure. Challenges to implementing CO₂-stimulated geothermal enhancement (CS-GE) include (1) accurately characterizing and imaging CO₂-stimulated geothermal reservoirs; (2) quantitatively inferring CS-GE evolution under current and future engineered conditions for cost effective operations; and (3) monitoring resources by improving observational methods to advance the understanding of complex geothermal systems for sweep efficiency and, ultimately, cost effectiveness. NETL and Shell will collaborate under this CRADA to develop software to image key features, including CO₂-stimulated fracture imaging, CO₂ fluid sweep imaging and heat transfer and exchange imaging by leveraging available datasets and applying advanced Artificial Intelligence/Machine Learning (AI/ML), multi-level data analytics and data/information fusion to better understand the comprehensive mechanisms of CO₂-stimulated geothermal systems.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Delivery of LiH Shell for DANCE

Material for a new LiH shell for neutron shielding has been obtained for the Detector for Advanced Neutron Capture Experiments. This is a critical component for optimizing sensitivity of neutron capture experiments performed in support of Office of Experimental Sciences mission, particularly in the case of small, rare samples.

42 ENGINEERING↗
DOE OSTI2024

Hanford Double Shell Waste Tank Corrosion Studies (Final Report FY2023)

For fiscal year (FY) 2023, the Savannah River National Laboratory (SRNL) focused on two experimental tasks related to Hanford Double Shell Tank (DST) chemistry and integrity. The first task focused on understanding risk of corrosion due to formation of either continuous layers or discrete patches of solids on the tanks’ inner sidewalls and bottoms. Differences in the conductivity between various layers of the tank (e.g., solids, liquid, etc.) could result in differences in the electrochemical potential of the tank metal at various locations. The electrochemical potential difference may result in a corrosion current between the coupled surfaces. In FY23, SRNL investigated test configurations and protocols that could evaluate the presence of a galvanic couple between the tank bottom and the tank wall.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Degradation of performance in Z-pinch implosions due to shell and magnetic-drive asymmetries

Achieving maximum performance in a Z-pinch Magnetized Liner Inertial Fusion (MagLIF) implosion requires high levels of symmetry to reach high pressures, high areal densities, and high efficiency energy coupling between the compressed fuel and the imploding shell. In this work, we present the development of a nonlinear model to describe an asymmetric MagLIF liner undergoing magneto-Rayleigh-Taylor (MRT) instabilities in the z = 0 plane. We investigate and present results from our model that show the degradation of the pressure at stagnation under various kinds of asymmetries that can arise during MagLIF experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Core-Shell Oxidative Aromatization Catalysts for Single Step Liquefaction of Distributed Shale Gas (Final Technical Report)

The objective of this project was to design and demonstrate a core-shell structured multifunctional catalyst to convert the light (dry) components of shale gas into liquid aromatic compounds (primarily benzene and toluene) in a single step. Operated in a modular oxidative aromatization system (OAS) under a cyclic redox scheme, the novel catalyst and process can significantly improve the value and transportability of distributed shale gas. Since the project started, each quarter addressed a different set of tasks related to the completion of the milestone detailed in the project award. The yearly summaries of these tasks are summarized below: Q1-Q4: • Conducted project planning and literature search. • Investigated a number of SHC redox catalysts using thermogravimetric analysis and fixed-bed reactor experiments. • Initiated process modeling towards generating two process models for the methane DHA base case and OAS process. • Developed DHA catalysts capable of producing >500 g/kg-cat-hr aromatics at 80% or greater aromatics selectivity at 700°C. Q5-Q8: • Developed alternative approaches with sequential bed configurations to enhance the aromatic yields based on OCM+DHA • Improved the zeolite synthesis efficiency by using the microwave-assisted technique and investigated the synthesis conditions on the zeolite yield, crystalline structure and morphology • Constructed a set of Aspen Plus process models with significant energy savings for OAS as compared to the base case non-oxidative DHA. • Adapted conventional hydrothermal method to be applicable to the microwave synthesizer unit for more efficient catalyst synthesis. • Studied the structure of the OCM catalyst and the dispersion of the carbonate in the redox reactions and in methane flow with Raman Spectroscopy. Q9-Q12: • Scaled up the catalyst synthesis with the microwave synthesis method. Based on its performance, procedural characterizations and catalytic performance testing were further conducted for the new microwave synthesized catalysts with the newly-developed product analysis procedure. • Developed the reaction system setup for the C2-DHA or OCM+DHA reaction product and achieved a better product collection-analysis method for the aromatic products with an improved carbon balance. The product from the OCM reaction exhibited complicated effects on the DHA catalyst. • Conducted additional OCM catalyst characterization using Near Ambient Pressure X-ray Photoelectron Spectroscopy and in situ Raman characterization • Validated the significant energy savings for OAS as compared to the base case non-oxidative DHA. Successfully set up the simulation model for the OCM+DHA+SHC reaction system based on the updated experimental results from NCSU. Q13-End of project: • Synthesized new zeolite catalysts by the microwave method, conducted characterizations (XRD, SEM, and TEM) and catalytic behavior testing. • Explored the “wet” C 2 H 6 and C 2 H 4 DHA reactions with using steam co-feed. A subsequent reduction as the regeneration step can regenerate the DHA catalyst and recover 99% activity of the fresh performance. • Achieved a 15.3% single-pass aromatic yield from methane by rationally combining the OCM and DHA at different temperatures. • Conducted a 105-hour stability test with an improved regeneration procedure, with an average aromatic yield of 13.8%. • Developed new catalyst and achieved a record-high 23.2% yield.

03 NATURAL GAS↗
DOE OSTI2024

Simulation & Analysis of the Hydronic Shell Retrofit System as a Solution for Deep Energy Retrofits and Electrification of Large Multifamily Housing Communities in Cold Climate

According to the 2020 residential energy consumption survey, there are 32 million multi-family buildings in the United States, and approximately 42% of these have poor or no insulation (US EIA 2020). Electrification of buildings with heat pump is one of the key strategies to achieve the goal of 90% reduction of greenhouse gas emissions in buildings by 2050 (U.S. Department of Energy 2024a). Building electrification will also enable greater penetration of variable renewable energy sources. However, replacing the natural gas dominated heating system by electrical appliance will increase the electrical load in heating dominated climate. It is crucial to well-insulate the building envelope to mitigate the stress in the grid from electrification. The hydronic shell (HS) system discussed next can achieve dual objective of envelope retrofit with space heating system electrification.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Hanford Double Shell Waste Tank Corrosion Studies- Final Report FY2024

For fiscal year (FY) 2024, the Savannah River National Laboratory (SRNL) focused on two experimental tasks related to Hanford Double Shell Tank (DST) chemistry and integrity. The first task focused on understanding risk of corrosion due to formation of either continuous layers or discrete patches of solids on the tanks’ inner sidewalls and bottoms. The objective of this task was to determine the effect of solid deposits on the corrosion risk to the tank bottom, and whether a combination of scale, saltcake and loose solids lead to under deposit corrosion. Electrochemical testing in a single cell arrangement was employed to determine a threshold inhibitor level for the interstitial liquid in the solids, above which carbon steel was not susceptible to corrosion beneath the solids. The inhibitor levels tested were based on the previously determined probability of failure for carbon steel in a simulated waste (i.e., Pitting Factor).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗