Search NASA⌕ Search

SEARCH · Search NASA

Results for “simplification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Ground Wind Loads on the Space Launch System’s Mobile Launcher Crew Access Arm

An aerodynamic database for the crew access arm during deployment is generated. While initial attempts used data derived from wind tunnel testing, limitations lead to the use of computational fluid dynamics to improve analysis. This computational data compared favorably to the experimental data increasing confidence in both. Further analysis lead to simplification showing the ability to build the database with a single relative wind variable which takes into account both arm deployment angle and wind direction. Eventually geometric simplifications and conservative results lead to the use of simulations of the CAA alone to build the database.Finally these static conditions are then compared to a dynamic simulation where the CAA rotates into position to test the quasi-steady state assumptions used to generate the database. The dynamic case showed an increase in the moment of interest but within acceptable bounds for now.

SLS↗
DOE OSTI2018

A SIMPLIFIED ENERGY MODELING APPROACH FOR BUILDINGS

This paper introduces simplified energy modeling (SEM) approaches using DOE2 and EnergyPlus and proposes a validation method for simplified energy modeling. Simplified energy modeling can allow more design teams and owners to leverage the power of energy modeling to inform their designs and lead to greater energy savings and a lower first cost because the technologies and design strategies can be thoroughly tested against models before the decisions are made. By starting a discussion on how to develop simplified energy modeling approaches and methods to validate results, we hope to increase innovation in energy modeling software while decreasing variation between modelers. Simplified modeling is not yet widely accepted because it is unclear if the simplifications reduce the accuracy of the results. By starting an industry dialogue on a testing method for these modeling approaches, we hope to aid adoption of more streamlined tools when they can be shown to provide similar accuracy to more detailed tools. This paper proposes a method to test simplified energy modeling programs against the DOE prototype buildings. It builds on the testing procedure established for simulation engines by ASHRAE Standard 140. By comparing whole building and end use results from the accepted prototype buildings to any simplified modeling approach across multiple building types and climate zones we can determine if the simplifications create unwarranted error. We will present the SEM approach and results for a case study validation for a sample building types in 16 US climate zones from two such simplified energy modeling tools.

Energy Modeling, 90.1 Appendix G, Asset Score Tool↗
DOE OSTI2020

A Simplified Building Modeling Approach for Identifying Whole Building Retrofits

Building Energy Modeling (BEM) is an effective strategy for optimizing new and retrofit building design, evaluating its energy savings potential and rating its energy performance. However, because of the complexity and expense of modeling, only a small percentage of buildings are simulated. Over 80% of buildings are <25,000 ft2, and the cost associated with BEM can be a big deterrent for reaching this subsector, which usually ends up complying with energy codes and qualifying for incentives using prescriptive measures or generalized design guides. Similarly, efficiency considerations for small building retrofits are often identified through deemed measures or Technical Reference Manuals, which though a scalable and convenient approach, can limit innovation in design and optimization of measures. Simplification of the modeling process, where appropriate, can lead to increased energy savings and more informed decision making. This paper will discuss the development of a ruleset for a simplified approach based on the Performance Rating Method (PRM) contained in ASHRAE Standard 90.1. The approach aims to simplify and lower the cost of the energy modeling process in a controlled and documented manner. An anticipated outcome is an increased use of BEM and its effectiveness in the design, retrofit and operation of commercial buildings. In addition, simplification of the modeling process will result in fewer errors from misinterpretations of both program requirements and program intent in simulation software. The paper will discuss the need and advantages of a simplified modeling approach for whole building retrofits and the technical process for achieving the same.

Goel, Supriya↗
DOE OSTI2025

The impact of simplified window and exhaust fan assumptions on indoor air quality in multifamily buildings

In residential buildings, the indoor air quality can be significantly affected by ventilation measures initiated by occupants, including the operation of windows and in-unit exhaust fans in kitchens and bathrooms. Many simulations simplify these factors by disregarding window opening behaviors and using fixed schedules for exhaust fan operation across all residential units. To estimate the impact of these simplifications in the U.S. context, this study used coupled CONTAM and EnergyPlus models to simulate airflow and contaminant transport in multifamily buildings. The coupled models parametrically varied climate zone, building airtightness, and mechanical ventilation system types. The study conducted a sensitivity analysis on two key occupant behaviors: (1) operating kitchen and bathroom exhausts on different schedules in individual dwelling units, and (2) scheduling open windows on ground and top floors. The simplified assumptions (i.e. uniform in-unit exhaust fan operation and window operation) had a minimal impact on inter-unit air flow and contaminant transport simulations across a broad range of building air leakage and mechanical ventilation system types. These findings suggest that for buildings with tight construction it is reasonable for most modelling and simulation efforts to ignore the effects of non-uniform exhaust fan operation and window opening.

Occupant behavior↗
DOE OSTI2023

Suppressing Structural Relaxation in Nanoscale Antimony to Enable Ultralow‐Drift Phase‐Change Memory Applications

Abstract Phase‐change random‐access memory (PCRAM) devices suffer from pronounced resistance drift originating from considerable structural relaxation of phase‐change materials (PCMs), which hinders current developments of high‐capacity memory and high‐parallelism computing that both need reliable multibit programming. This work realizes that compositional simplification and geometrical miniaturization of traditional GeSbTe‐like PCMs are feasible routes to suppress relaxation. While to date, the aging mechanisms of the simplest PCM, Sb, at nanoscale, have not yet been unveiled. Here, this work demonstrates that in an optimal thickness of only 4 nm, the thin Sb film can enable a precise multilevel programming with ultralow resistance drift coefficients, in a regime of ≈10 −4 –10 −3 . This advancement is mainly owed to the slightly changed Peierls distortion in Sb and the less‐distorted octahedral‐like atomic configurations across the Sb/SiO 2 interfaces. This work highlights a new indispensable approach, interfacial regulation of nanoscale PCMs, for pursuing ultimately reliable resistance control in aggressively‐miniaturized PCRAM devices, to boost the storage and computing efficiencies substantially.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Scalable Al 2 O 3 –TiO 2 Conductive Oxide Interfaces as Defect Reservoirs for Resistive Switching Devices

Abstract Resistive switching devices herald a transformative technology for memory and computation, offering considerable advantages in performance and energy efficiency. Here, a simple and scalable material system of conductive oxide interfaces is employed, and their unique properties are leveraged for a new type of resistive switching device. An Al 2 O 3 –TiO 2 ‐based valence‐change resistive switching device, where the conductive oxide interface serves both as the bottom electrode and as a reservoir of defects for switching, is demonstrated. The amorphous–polycrystalline Al 2 O 3 –TiO 2 conductive interface is obtained following the technological path of simplifying the fabrication of the 2D electron gases (2DEGs), making them scalable for practical mass integration. Physical analysis of the device chemistry and microstructure with comprehensive electrical analysis of its switching behavior and performance is combined. The origin of the resistive switching is pinpointed to the conductive oxide interface, which serves both as the bottom electrode and as a reservoir of oxygen vacancies. The latter plays a key role in valence‐change resistive switching devices. The new device, based on scalable and complementary metal–oxide–semiconductor (CMOS)‐technology‐compatible fabrication processes, opens new design spaces toward increased tunability and simplification of the device selection challenge.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Conservative solute transport processes and associated transient storage mechanisms: Comparing streams with contrasting channel morphologies, land use and land cover

Abstract Land use within a watershed impacts stream channel morphology and hydrology and, therefore, in‐stream solute transport processes and associated transient storage mechanisms. This study evaluated transport processes in two contrasting stream sites where channel morphology was influenced by the surrounding land use, land cover, climate and geologic controls: Como Creek, CO, a relatively undisturbed, high gradient, forested stream with a gravel bed and complex channel morphology, and Clear Creek, IA, an incised, low‐gradient stream with low‐permeability substrate draining an agricultural landscape. We performed conservative stream tracer injections at these sites to address the following questions: (1) How does solute transport vary between streams with differing morphologies? and (2) How does solute transport at each stream site change as a function of discharge? We analysed in‐stream tracer time series data and compared results quantifying solute attenuation in surface and subsurface transient storage zones. Significant trends were observed in these metrics with varying discharge conditions at the forested site but not at the agricultural site. There was a broad range of transport mechanisms and evidence of substantial exchange with both surface and hyporheic transient storage in the relatively undisturbed, forested stream. Changing discharge conditions activated or deactivated different solute transport mechanisms in the forested site and greatly impacted advective travel time. Conversely in the simplified agricultural stream, there was a narrow range of solute transport behaviour across flows and predominantly surface transient storage at all measured discharge conditions. These results demonstrate how channel simplification inhibits available solute transport mechanisms across varying discharge conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A large deformation multiphase continuum mechanics model for shock loading of soft porous materials

A large deformation, coupled finite-element (FE) model is developed to simulate the multiphase response of soft porous materials subjected to high strain-rate loading. The approach is based on the theory of porous media (TPM) at large deformations. Simplifications to the one-dimensional regime studied in the numerical simulations follow. An overview of several different time integration schemes is presented for the purpose of solving the nonlinear dynamic coupled balance of momenta (mixture and fluid) and balance of mass of the mixture equations. Numerical examples are presented for (i) verification against closed-form analytical solutions assuming small loads, (ii) demonstrating large deformation effects at high strain-rate, and (iii) showing differences in deformations between a single-phase elastodynamics model with occluded compressible pore fluid and a multiphase poroelastodynamics model at high strain-rate. The multiphase model shows that the relative motion of the pore fluid significantly dampens the deformation response of the solid skeleton as compared to the single-phase model, and makes it possible to extract quantitative values for the stresses of the different constituents, thereby allowing one to form preliminary conclusions about the onset of damage in the solid skeleton. The novelty of the current work is developing a multiphase, large deformation, mixture theory numerical model for high strain-rate loading of soft porous materials. It was discovered that explicit, adaptive time-stepping Runge–Kutta schemes offer high accuracy at relatively low cost when compared to traditional implicit or explicit central difference time-stepping schemes for shock-like loadings. Here, shock viscosity is added to the mixture momentum balance equation to regularize the shock front, and a stabilization term is added to the mixture mass balance equation to stabilize equal order interpolation finite elements for the coupled finite element solution of multiphase materials.

Engineering↗
DOE OSTI2020

Using AI Simulations to Dynamically Model Multi-agent Multi-team Energy Systems

The complexity of energy systems is well known as they are complex and intricate systems. As a result, many extant studies have used many simplifications or generalizations that do not accurately reflect the nature of this complex system. In particular, most HVAC systems are modeled as a single unit, or several large units, rather than as a hierarchical composite (e.g., as a floor rather than as a collection of disparate rooms). The net result of this is that the simulations are too generic to perform meaningful analysis, machine learning, or integrated simulation. We propose using a multi-agent multi-team strategic simulations framework called SiMAMT to better define, model, simulate, and learn the HVAC environment. SiMAMT allows us to create distinct models for each type of room, hierarchically aggregate them into units (like floors, or sections), and then into larger sets (like buildings or a campus), and then perform a simulation that interacts with each sub-element individually, the teams of sub-elements collectively, and the entire set in aggregation. Further, and most importantly, we additionally model another ‘team’ within the simulation framework - the users of the systems. Again, each individual is modeled distinctly, aggregated into sub-sets, then collected into large sets. Each user, or agent, is performing on their own but with respect to the larger team goals. This provides a simulation that has a much higher model fidelity and more applicable results that match the real-world.

Franklin, D. Michael↗
DOE OSTI2019

Black hole spectroscopy and AdS 2 holography

We compute the spectrum of extremal nonBPS black holes in four dimensions by studying supergravity on their AdS 2 × S2 near horizon geometry. We find that the spectrum exhibits significant simplifications even though supersymmetry is completely broken. We interpret our results in the framework of nAdS 2 /nCFT 1 correspondence and by comparing with dimensional reduction from AdS 3 /CFT 2 duality. As an additional test we compute quantum corrections to extremal black hole entropy on the nonBPS branch and recover results previously determined using very different methods.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Anomalous dimensions from soft Regge constants

Using an effective field theory (EFT) formalism for forward scattering, we reconsider the factorization of 2 → 2 scattering amplitudes in the Regge limit. Expanding the amplitude in gauge invariant operators labelled by the number of Glauber exchanges, allows us to further factorize the standard impact factors into separate collinear and soft functions. The soft functions are universal, and describe radiative corrections to the Reggeized gluon states exchanged by the collinear projectiles. Remarkably, we find that the one-loop soft function for the single Reggeized gluon state is given to O(ϵ) in terms of the two-loop cusp and two-loop rapidity anomalous dimensions. We argue that this iterative structure follows from the simple action of crossing symmetry in the forward scattering limit, which in the EFT allows us to replace the divergent part of a soft loop by a much simpler Glauber loop. We use this correspondence to provide a simple calculation of the two-loop Regge trajectory using the EFT. We then explore its implications at higher perturbative orders, and derive the maximally matter dependent contributions to the Regge trajectory to all loop orders, i.e. the terms ~ α$^{k+1}_{s}$n$^{k}_{f}$ for any k, where n f is the number of massless flavors. These simplifications suggests that the EFT approach to the Regge limit will be helpful to explore and further understand the structure of the Regge limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Global symmetry and integral constraint on superconformal lines in four dimensions

We study properties of point-like impurities preserving flavor symmetry and supersymmetry in four-dimensional 𝒩 = 2 field theories. At large distances, such impurities are described by half-BPS superconformal line defects. By working in the AdS 2 × S 2 conformal frame, we develop a novel and simpler way of deriving the superconformal Ward identities relating the various two-point functions of flavor current multiplet operators in the presence of the defect. We use these relations to simplify a certain integrated two-point function of flavor current multiplet operators that, in Lagrangian theories, can be computed using supersymmetric localization. The simplification gives an integral constraint on the two-point function of the flavor current multiplet superconformal primary with trivial integration measure in the AdS 2 × S 2 conformal frame. We provide several consistency checks on our Ward identities.

extended supersymmetry↗
DOE OSTI2022

Vector boson pair production at one loop: analytic results for the process $q\bar{q}$$ℓ\bar{ℓ}$$ℓ'\bar{ℓ}'g$

We present compact analytic results for the one-loop amplitude for the process 0 → $q\bar{q}$$ℓ\bar{ℓ}$$ℓ'\bar{ℓ}'g$, relevant for both the production of a pair of Z and W-bosons in association with a jet. We focus on the gauge-invariant contribution mediated by a loop of quarks. We explicitly include all effects of the loop-quark mass m, appropriate for the production of a pair of Z-bosons. In the limit m → 0, our results are also applicable to the production of W-boson pairs, mediated by a loop of massless quarks. Implemented in a numerical code, the results are fast. The calculation uses novel advancements in spinor-helicity simplification techniques, for the first time applied beyond five-point massless kinematics. We make use of primary decompositions from algebraic-geometry, which now involve non-radical ideals, and p-adic numbers from number theory. We show how to infer whether numerator polynomials belong to symbolic powers of non-radical ideals through numerical evaluations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Relations between anomalous dimensions in the Regge limit

We extend the recent formalism developed for computing rapidity anomalous dimension of form factors using unitarity to the problem of high-energy near forward scattering. By combining the factorization of 2 → 2 scattering in the effective field theory (EFT) for Glauber operators with definite signature amplitudes, we derive an expression that relates anomalous dimensions (including Regge trajectories) to cut amplitudes, leading to significant computational simplifications. We demonstrate this explicitly by computing the one and two-loop Regge trajectories. Our formalism can also be used to bootstrap anomalous dimensions of operators not related by symmetries. As an example, we show that the full anomalous dimensions (including both the Regge pole and cut pieces) of the two Glauber exchange anti-symmetric octet operator, can be determined from the anomalous dimension of the single Glauber exchange operator. Many other such relations exist between other color channels at each order in α.

Effective Field Theories↗
DOE OSTI2018

Lightcone effective Hamiltonians and RG flows

We introduce a prescription for an effective lightcone (LC) Hamiltonian that includes the effects of zero modes, focusing on the case of Conformal Field Theories (CFTs) deformed by relevant operators. We display how the prescription resolves a number of issues with LC quantization, including i) the apparent non-renormalization of the vacuum, ii) discrepancies in critical values of bare parameters in equal-time vs LC quantization, and iii) an inconsistency at large N in CFTs with simple AdS duals. We describe how LC quantization can drastically simplify Hamiltonian truncation methods applied to some large N CFTs, and discuss how the prescription identifies theories where these simplifications occur. We demonstrate and check our prescription in a number of examples.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Circles and triangles, the NLSM and Tr(Φ 3 )

A surprising connection has recently been made between the amplitudes for Tr(Φ 3 ) theory and the non-linear sigma model (NLSM). A simple shift of kinematic variables naturally suggested by the associahedron/stringy representation of Tr(Φ 3 ) theory yields pion amplitudes at all loops. In this note we provide an elementary motivation and proof for this link going in the opposite direction, starting from the non-linear sigma model and discovering its formulation as a sum over triangulations of surfaces with simple numerator factors. This uses an ancient connection between “circles” and “triangles”, interpreting the equation y = $\sqrt{1 – x^2}$ both as parametrizing points a circle as well as generating the number of triangulations of polygons. A further simplification of the numerator factors exposes them as arising from the kinematically shifted Tr(Φ3) theory, and gives rise to novel tropical representations of NLSM amplitudes. The connection to Tr(Φ 3 ) theory defines a natural notion of “surface-soft limit” intrinsic to curves on surfaces. Remarkably, with this definition, the soft limit of pion amplitudes vanishes directly at the level of the integrand, via obvious pairwise cancellations. We also give simple, explicit expressions for the multi-soft factors for tree and loop-level integrands in the limit as any number of pions are taken “surface-soft”.

Scattering Amplitudes↗
DOE OSTI2024

Extracting the asymptotic behavior of S-matrix elements from their phases

The asymptotic kinematic limits of S-matrices are dominated by large logarithms which, roughly speaking, fall into two categories: those which are controlled by a renormalization group (RG) scale, which we may think of as logs involving ratios of invariant mass scales, and those which are functions of ratios of rapidities, so called “rapidity logs”. It has been pointed out by Caron-Huot and Wilhlem [1] that RG anomalous dimension can be extracted from the phase of the S-matrix, which can greatly simplify calculations via unitarity methods. In this paper we generalize the results of [1] to show that the phase can be used to reconstruct rapidity anomalous dimensions, by performing a special type of complex boost. The methodology introduced allows one to calculate without the need for a rapidity regulator which can lead to significant simplifications. We demonstrate the use of this method to derive the rapidity anomalous dimensions in the Sudakov form factor and the two parton soft function at two loops order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

CGC for ultra-peripheral Pb+Pb collisions at the Large Hadron Collider: a more realistic calculation

We provide the first calculation of two-gluon production at mid-rapidity in ultra-peripheral collisions in the Color Glass Condensate framework. To estimate systematic uncertainty associated with poor understanding of the wave function of the nearly real photon, we consider two diametrically different models: the dilute quark-antiquark dipole approximation and a vector meson, in which color charge density is approximated by McLerran-Venugopalan model. In the experimentally relevant range, the target nucleus can be faithfully approximated by a highly saturated state. This simplification enables us to perform efficient numerical simulations and extract the two-gluon correlation functions and the associated azimuthal harmonics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗