Search NASA⌕ Search

SEARCH · Search NASA

Results for “sintering preparation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Resin chemistry and particle size influence on stereolithography with silicon carbide

Stereolithography (SLA) is an established process able to produce high resolution polymer parts with complex geometries. Silicon carbide (SiC) has uses in a variety of applications, but traditionally was difficult to manufacture into complex geometries. There have been advances in producing SiC through SLA using a SiC-derived ceramic such as silicon oxycarbide (SiOC). In this study, a slurry using a commercially available resin as the base material with additional modifiers was investigated to create a SiC slurry ready for pressureless sintering. The effects of photoinitiator, dispersant and a bimodal distribution of SiC particle sizes was studied using a design of experiments (DOE). A slurry with a bimodal distribution of 70 % coarse and 30 % fine SiC powder at 40 % solids loading by volume was prepared and successfully printed. Rheology measurements show the slurry to have viscoelastic shear thinning behavior below the recommended 1000 Pas necessary for printing. Printing parameters for the new material on a commercially available SLA printer were studied parametrically. The laser marking speeds found to print the slurry was 260 mm/s and 130 mm/s. A slurry and printing parameters were determined to produce a green part with a proposed debinding cycle.

Herd, Tien [ORNL]↗
DOE OSTI2024

Enhanced Thermal Stability of Conductive Mercury Telluride Colloidal Quantum Dot Thin Films Using Atomic Layer Deposition

Colloidal quantum dots (CQDs) are valuable for their potential applications in optoelectronic devices. However, they are susceptible to thermal degradation during processing and while in use. Mitigating thermally induced sintering, which leads to absorption spectrum broadening and undesirable changes to thin film electrical properties, is necessary for the reliable design and manufacture of CQD-based optoelectronics. Here, low-temperature metal–oxide atomic layer deposition (ALD) was investigated as a method for mitigating sintering while preserving the optoelectronic properties of mercury telluride (HgTe) CQD films. ALD-coated films are subjected to temperatures up to 160 °C for up to 5 h and alumina (Al 2 O 3 ) is found to be most effective at preserving the optical properties, demonstrating the feasibility of metal–oxide in-filling to protect against sintering. HgTe CQD film electrical properties were investigated before and after alumina ALD in-filling, which was found to increase the p-type doping and hole mobility of the films. The magnitude of these effects depended on the conditions used to prepare the HgTe CQDs. With further investigation into the interaction effects of CQD and ALD process factors, these results may be used to guide the design of CQD–ALD materials for their practical integration into useful optoelectronic devices.

36 MATERIALS SCIENCE↗
NASA NTRS2009

Cast Aluminum Alloys for High Temperature Applications Using Nanoparticles Al2O3 and Al3-X Compounds (X = Ti, V, Zr)

In this paper, the effect of nanoparticles Al2O3 and Al3-X compounds (X = Ti, V, Zr) on the improvement of mechanical properties of aluminum alloys for elevated temperature applications is presented. These nanoparticles were selected based on their low cost, chemical stability and low diffusions rates in aluminum at high temperatures. The strengthening mechanism at high temperature for aluminum alloy is based on the mechanical blocking of dislocation movements by these nanoparticles. For Al2O3 nanoparticles, the test samples were prepared from special Al2O3 preforms, which were produced using ceramic injection molding process and then pressure infiltrated by molten aluminum. In another method, Al2O3 nanoparticles can also be homogeneously mixed with fine aluminum powder and consolidated into test samples through hot pressing and sintering. With the Al3-X nanoparticles, the test samples are produced as precipitates from in-situ reactions with molten aluminum using conventional permanent mold or die casting techniques. It is found that cast aluminum alloy using nanoparticles Al3-X is the most cost effective method to produce high strength aluminum alloys for high temperature applications in comparison to nanoparticles Al2O3. Furthermore, significant mechanical properties retention in high temperature environment could be achieved with Al3-X nanoparticles, resulting in tensile strength of nearly 3 times higher than most 300- series conventional cast aluminum alloys tested at 600 F.

Lee, Jonathan A.↗
NASA NTRS1972

Study, selection, and preparation of solid cationic conductors

Crystal chemical principles and transport theory were used to predict structures and specific compounds which might find application as solid electrolytes in rechargeable high energy and high power density batteries operating at temperatures less than 200 C. More than twenty compounds were synthesized or obtained and screened by nuclear magnetic resonance and conductivity. Many were densified by sintering or hot pressing. Encouraging results were obtained for nine of these materials but none have yet been good ionic conductors at low temperature.

Roth, W. L.↗
DOE OSTI2021

Hybrid of multi‐dimensional fillers for thermally enhanced polyamide 12 composites fabricated by selective laser sintering

Abstract Selective laser sintering (SLS) is an additive manufacturing technology that can provide a novel strategy to manufacture complex polymer‐based composites with tailored properties. In this study, polyamide 12 (PA12) composite powders based on Al 2 O 3 , boron nitride (BN), and carbon nanotubes (CNTs) were prepared via a two‐step mixing approach. Morphology characterization techniques indicated that the fillers were uniformly dispersed in the PA12 matrix as expected. Under the optimum 3D‐printing parameters, the fabrication of SLS parts with high filler loading could be obtained. With 40 wt% Al 2 O 3 , 8 wt% BN, and 2 wt% CNT hybrid fillers, the thermal conductivity of PA12 composites could reach 1.09 W/mK. It could be attributed to the synergistic effect of multi‐dimensional fillers to form dense and continuous thermal conduction paths. The factors influencing the performance of PA12 composites such as melting and crystallization behaviors, dielectric properties, and mechanical properties were also discussed. The results show that these composites have favorable dielectric and mechanical properties. Overall, the PA12 composites fabricated by SLS technology in this study exhibit excellent thermal management ability.

Yuan, Yue↗
DOE OSTI2020

Additive manufacturing of highly dense anisotropic Nd–Fe–B bonded magnets

Extrusion based big area additive manufacturing process is utilized for fabrication of dense anisotropic bonded magnets. High loading fraction (≥70 vol%) of magnequench anisotropic Nd–Fe–B powder in nylon is used for preparing anisotropic bonded magnets. A higher energy product of ~143.2 kJ/m 3 is obtained for the post printed magnetic field aligned at 1 Tesla. These findings make an important step towards the fabrication of gap magnets with energy product between ferrite and Nd–Fe–B sintered magnets. Finally, printed bonded magnets exhibited better thermal stability, mechanical properties and superior magnetic properties compared to commercial injection molded magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Perspective on Thin-Film Perovskites as Supports for Metal Catalysts

Perovskite-supported metals have sometimes been referred to as “intelligent catalysts” because of the potential to regenerate sintered particles by driving the metal into the oxide lattice by high-temperature oxidation and releasing the metal by reduction. However, low surface areas and incomplete release of metal from the lattice have prevented the widespread application of these materials. Furthermore, we describe the preparation of thin perovskite films on stable supports by Atomic Layer Deposition (ALD) as a means for avoiding the limitations associated with bulk perovskites. Examples will be given that demonstrate many of the favorable properties of perovskite supports can be retained, while avoiding some of the shortcomings. Potential opportunities for using these materials are discussed.

36 MATERIALS SCIENCE↗
NASA NTRS1996

Preparation and Properties of High-T(sub c) Bi-Pb-Sr-Ca-Cu-O Thick Film Superconductors on YSZ Substrates

An evaluation of four firing profiles was performed to determine the optimum processing conditions for producing high-T(sub c) Bi-Pb-Sr-Ca-Cu-O thick films on yttria-stabilized zirconia substrates. Using these four profiles, the effects of sintering temperatures of 830-850 C and soak times of 0.5 to 12 hours were examined. In this study, T-c, zero values of 100 K were obtained using a firing profile in which the films were sintered for 1.5 to 2 hours at 840 to 845 C and then quenched to room temperature. X-ray diffraction analyses of these specimens confirmed the presence of the high-T(sub c) phase. Films which were similarly fired and furnace cooled from the peak processing temperature exhibited a two-step superconductive transition to zero resistance, with T-c,zero values ranging from 85 to 92 K. The other firing profiles evaluated in this investigation yielded specimens which either exhibited critical transition temperatures below 90 K or did not exhibit a superconductive transition above 77 K.

Hooker, Matthew W.↗
DOE OSTI2020

Testing of Crystalline Silicotitanate to Support Tank-Side Cesium Removal System Operations - 20458

The direct feed of waste from the Hanford tank farms to the Low-Activity Waste Facility at the Hanford Waste Treatment and Immobilization Plant requires an intermediate treatment step that prepares the waste for vitrification. Washington River Protection Solutions (WRPS) selected a near-tank treatment system known as the Tank-Side Cesium Removal (TSCR) system to perform the required intermediate treatment functions. The approach in the TSCR system is to filter waste supernatant with a sintered metal dead-end filter and then use a series of ion exchange columns to remove cesium; this system has several similarities to the Tank Closure Cesium Removal system that has been deployed on the Savannah River Site. The ion exchange media proposed for use is crystalline silicotitanate (CST), which is a non-elutable media with a high affinity for cesium. Because the media is non-elutable, loaded columns will be blown down with compressed air, moved into interim storage, and replaced with new columns when cesium capacity is reached. The assumed extent and rate of drying that could be achieved in the TSCR column geometry lacked confirmation by experimental data. In addition, once the columns are loaded with cesium, they generate flammable gases (primarily hydrogen) via radiolysis acting on any resident liquids, i.e., moisture, remaining in the media bed. An assessment of available information on CST concluded that gas generation data that bounds expected operational conditions were needed to support the TSCR system safety basis and planned operations. Working with WRPS, Pacific Northwest National Laboratory (PNNL) designed and conducted testing with CST media to address the need for (a) representative in-column drying data, and (b) bounding flammable gas generation data. Drying testing was performed using a full-height column with a diameter of approximately 2 inches with injected air at temperatures of 18 deg. C and 30 deg. C. Gas generation testing was conducted in an engineered bunker that allowed simultaneous irradiation of up to eight samples at a time. These two experimental approaches used at PNNL for the CST testing are summarized and the major outcomes are presented. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Crystal Structure and Preparation of Li7La3Zr2O12 (LLZO) Solid-State Electrolyte and Doping Impacts on the Conductivity: An Overview

As an essential part of solid-state lithium-ion batteries, solid electrolytes are receiving increasing interest. Among all solid electrolytes, garnet-type Li7La3Zr2O12 (LLZO) has proven to be one of the most promising electrolytes because of its high ionic conductivity at room temperature, low activation energy, good chemical and electrochemical stability, and wide potential window. Since the first report of LLZO, extensive research has been done in both experimental investigations and theoretical simulations aiming to improve its performance and make LLZO a feasible solid electrolyte. These include developing different methods for the synthesis of LLZO, using different crucibles and different sintering temperatures to stabilize the crystal structure, and adopting different methods of cation doping to achieve more stable LLZO with a higher ionic conductivity and lower activation energy. It also includes intensive efforts made to reveal the mechanism of Li ion movement and understand its determination of the ionic conductivity of the material through molecular dynamic simulations. Nonetheless, more insightful study is expected in order to obtain LLZO with a higher ionic conductivity at room temperature and further improve chemical and electrochemical stability, while optimal multiple doping is thought to be a feasible and promising route. This review summarizes recent progress in the investigations of crystal structure and preparation of LLZO, and the impacts of doping on the lithium ionic conductivity of LLZO.

Raju, Md Mozammal (ORCID:0000000319040523)↗
DOE OSTI2020

Highly Ordered Carbon Coating Prepared with Polyvinylidene Chloride Precursor for High‐Performance Silicon Anodes in Lithium‐Ion Batteries

Abstract A highly ordered carbon structure based on polyvinylidene chloride precursor has been developed to host silicon nanoparticles. The stoichiometric ratio of sacrificial H and Cl elements facilitated full utilization of the carbon content of the precursor that produced robust carbon coatings on silicon nanoparticles with excellent mechanic properties and electrochemical stabilities. The optimal sintering temperature and carbon content have been investigated. When evaluated as the anode of a lithium‐ion battery (LIB), the Si : C 1 : 2 composite sintered at 800 °C (SiC12‐800) provided excellent capacity retention of 85 % at 0.1 C after 50 cycles with an enhanced CE, which reached 99 % only after 10 cycles. The SiC12‐800 electrode maintained a specific capacity of 709.2 mAh/g after 300 cycles at 0.3 C, and delivered a high rate performance of 737.9 mAh/g and 485.6 mAh/g at 5 C and 10 C, respectively. The results indicate that polymer precursors with stoichiometric ratio of sacrificial elements have high potential for generating highly robust carbon coatings for silicon anodes in high energy density LIBs.

Zhou, Shuo↗
DOE OSTI2020

Silver Adsorption on Calcium Niobate(001) Nanosheets: Calorimetric Energies That Explain Sinter-Resistant Support

Metal nanoparticles deposited on oxide supports are essential to many technologies, including catalysts, fuel cells and electronics. Therefore, understanding the chemical bonding strength between metal nanoparticles and oxide surfaces is of great interest. The adsorption energetics, adhesion energy and adsorbate structure of Ag on dehydrated HCa 2 Nb 3 O 10 (001) nanosheets at 300 K have been studied using metal adsorption calorimetry and surface spectroscopies. These dehydrated (“dh”) calcium niobate nanosheets “(dh-HCa 2 Nb 3 O 10 (001))” have stoichiometry Ca 4 Nb 6 O 19 . They impart unusual stability to metal nanoparticles when used as catalyst supports and are easy-to-prepare by Langmuir-Blodgett (LB) techniques, highly ordered, and essentially single-crystal surfaces of mixed oxides with a huge ratio of terrace to edge sites. Below monolayer coverage, Ag grows on dh-HCa 2 Nb 3 O 10 (001) as 2D islands of thickness ~2 layers. The differential heat of Ag adsorption is initially ~303 kJ/mol, increasing slowly to ~338 kJ/mol by 0.8 ML. At higher coverages, Ag atoms mainly add on top of these 2D islands, growing 3D nanoparticles of increasing thickness, as the heat decreases asymptotically towards silver’s heat of sublimation (285 kJ/mol). The adhesion energy of Ag(s) to this Ca niobate surface is estimated to be 4.33 J/m 2 , larger than on any oxide surface previously measured. This explains the sinter resistance reported for metal nanoparticles on this support. Electron transfer from Ag into the calcium niobate is also measured. Furthermore, these results demonstrate an easy way to do singlecrystal-type surface science studies - and especially thermochemical measurements - on the complex surfaces of mixed oxides: using LB-deposited perovskite nanosheets and ultrahigh vacuum annealing in O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Preparation and Photocatalytic Hydrogen Production of TiO 2 /(AlMnCoNiZn) 3 O 4 Nanocomposites

Photocatalytic water splitting is a promising strategy for addressing the global energy crisis and environmental pollution. In this study, spinel-type high-entropy oxide (HEO) nanoparticles, (AlMnCoNiZn) 3 O 4 , were successfully synthesized via a solution combustion method. TiO 2 /(AlMnCoNiZn) 3 O 4 nanocomposites with varying molar ratios were subsequently fabricated through solid-state sintering, and their photocatalytic water-splitting performance was systematically investigated. The hydrogen production rate initially increased and then decreased with increasing TiO 2 content. The optimal nanocomposite achieved a hydrogen evolution rate of 1450 μmol·h −1 ·g −1 under simulated sunlight irradiation, which is 2.2 times higher than that of pure TiO 2 nanoparticles. In addition, the TiO 2 /(AlMnCoNiZn) 3 O 4 nanocomposites exhibited significantly improved photocorrosion resistance compared with TiO 2 nanoparticles. After 12 h irradiation under a 500-W high-pressure mercury lamp, the hydrogen production rates of the nanocomposites and pure TiO 2 retained 79.3% and 5.47% of their initial values, respectively. These results demonstrate the important role of (AlMnCoNiZn) 3 O 4 and other HEOs in enhancing the photocatalytic performance of nanoheterojunction catalysts. Lastly, this work broadens the potential applications of (AlMnCoNiZn) 3 O 4 and related HEO materials in the field of photocatalysis.

Heterojunction↗
DOE OSTI2020

Cathode materials for lithium ion batteries

A process of forming a coated cathode active material include preparing a cathode material precursor by co-precipitation; coating the cathode material precursor with an electrochemically inert coating material precursor by precipitation to form a coated cathode material precursor; lithiating the coated cathode material precursor with a lithium source material to form a lithiated coated cathode material precursor; and sintering the lithiated coated cathode material precursor to form a cathode active material coated with an electrochemically inert material.

Wu, Huiming↗
DOE OSTI2024

Scalable Surface Micro-Texturing of LLZO Solid Electrolytes for Battery Applications

A challenge for lithium lanthanum zirconate (LLZO)-based solid-state batteries is to increase the critical current density (CCD) to enable high current cycling. A promising strategy is to modify the LLZO surface morphology to provide a larger contact area with the Li metal. Here, a surface-textured thin LLZO electrolyte was prepared through an easily scalable process. The texturing process is a simple pressing of green LLZO tapes between micro-textured substrates. A variety of textures can be produced, depending on the type of substrate, and texturing can be on either one side or both sides. For this work, after pressing and sintering, several micro-patterns are formed on thin LLZO (~118 μm thick). The properties of the various samples were characterized to investigate the impact of surface texturing, and the most promising ones were selected for electrochemical testing in symmetrical lithium cells and full cells. Li symmetric cells using a coarse ridge-textured LLZO exhibit ~2.5 times increased CCD compared to planar non-textured LLZO, and a solid-state full cell shows stable cycling and improved rate performance. Finally, we believe this process offers a favorable trade-off of processing complexity vs structural optimization to maximize CCD.

25 ENERGY STORAGE↗
DOE OSTI2024

Additive manufacturing of multiscale NiFeMn multi-principal element alloys with tailored composition

Nanostructured multi-principal element alloys (MPEAs) have been explored as next-generation engineering materials due to unique mechanical and functional properties which have significant advantages over traditional dilute alloys. However, the practical applications of nanostructured MPEAs are still limited due to the lack of scalable processing approaches to prepare a large quantity of nanostructured MPEAs, as well as lack of an efficient pathway for high-throughput discovery of better functional nanostructured MPEAs within their vast compositional space. Here we tackle these challenges by presenting an integrated approach by combining direct-ink-writing-based additive manufacturing, solid-state sintering, and chemical dealloying to manufacture hierarchically porous MPEAs. The hierarchical structure is comprised of macro- and micro-scale pores introduced via extrusion printing and polymer decomposition during sintering, as well as nanoscale pores formed via chemical dealloying. The macro- and micro-scale pores allow efficient dealloying of a large mass of material as the diffusion length that the corroding medium must penetrate remains at the scale of the ligaments formed after sintering (∼10 μm), despite the large volume of the 3D-printed samples. In addition, this integrated approach enables versatile control of the alloy composition via precisely tuning the ratio of elemental powders in the starting ink, thus offering a pathway for high-throughput discovery of novel functional MPEAs. As a case study, multiscale macro/micro/nanoporous NiFeMn MPEAs with three different compositions were investigated as catalysts to reduce the overpotential of oxygen evolution reaction (OER), where NiFeMn-based electrocatalysts display composition-dependent performance such that the overpotential measured at a current of 0.5 A g −1 for OER increases in the order of Ni 58 Fe 29 Mn 13 ⩽ Ni 64 Fe 26 Mn 10 < Ni 76 Fe 18 Mn 6 . This introduced manufacturing process offers new opportunities for scalable fabrication and rapid screening of nanostructured multi-component complex alloys.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Lightweight nickel electrodes for nickel/hydrogen cells

Thick nickel electrodes with lightweight substrate material have been prepared and tested in Ni/H2 boilerplate cells containing 26 percent KOH electrolyte. Lightweight substrates used were either 85 or 90 percent in porosity and either 0.8 or 2 mm in thickness, respectively, compared with 80 to 82 percent porosity and 0.75 to 0.8 mm thickness of the state-of-the-art sintered plaque substrate. All of these thick electrodes had substantially improved theoretical (or chemical) capacity over that of state-of-the-art sintered nickel plaque electrodes. However, utilization of the active material was low (65 to 80 percent) compared with that of the state-of-the-art electrodes (approximately 90 percent) in 26 percent KOH. Due to this low utilization, the electrodes using 85 percent porous substrates did not show any advantage over the state-of-the-art ones. The electrodes using a 90 percent porous substrate, however, showed 17 percent higher usable specific capacity (about 0.13 Ah/g in 26 percent KOH) than that of the state-of-the-art nickel electrodes despite the low utilization. These electrodes achieved up to 4860 cycles at 40 percent depth-of-discharge with neither capacity loss nor any significant changes of rate capability and charging efficiency with cycling.

Lim, Hong S.↗