Search NASA⌕ Search

SEARCH · Search NASA

Results for “site evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Appendix D: Assessement of potential industrial sites in Essex County, New York

Potential industrial sites were assessed using high and medium altitude aircraft photographs and supporting information on the 4,730 sq. km. (1,825 sq. mile) county. Factors evaluated include land availability, slope, site accessibility, soil drainage, other subsurface characteristics, and the expected physical as well as visual impacts on existing land use. Areas unavailable or unsuitable for development were eliminated first, and the remaining areas evaluated and the best sites identified.

Wozny, T. M.↗

An evaluation of procedure 1

LACIE Procedure 1 has undergone continuous testing and evaluation, starting with analytical and experimental studies even before it was implemented in ERIPS software and continuing to the present with performance evaluations using blind-site data. The strengths and weaknesses of the procedure are indicated and some areas for possible improvement are identified. Results from three of the experiments performed and an evaluation of LACIE Procedure 1 proportion estimates for some blind-site segments are discussed.

Wheeler, S. G.↗

An Evaluation of MODIS-Retrieved Aerosol Optical Depth over a Mountainous AERONET Site in the Southeastern US

The literature shows that aerosol optical depth (AOD) derived from the MODIS Collection 5 (C5) dark target algorithm has been extensively validated by spatiotemporal collocation with AERONET sites on both global and regional scales.Although generally comparing well over the eastern US region, poor performance over mountains in other regions indicate the need to evaluate the MODIS product over a mountain site. This study compares MODIS C5 AOD at 550nm to AOD measured at the Appalachian State University AERONET site in Boone, NC over 30 months between August 2010 and September 2013. For the combined Aqua and Terra datasets, although more than 70% of the 500 MODIS AOD measurements agree with collocated AERONET AOD to within error envelope of +/- (0.05 + 15%), MODIS tends to have a low bias (0.02-0.03). The agreement between MODIS and AERONET AOD does not depend on MODIS quality assurance confidence (QAC) value. However, when stratified by satellite, MODIS-Terra data does not perform as well as Aqua, with especially poor correlation (r = 0.39) for low aerosol loading conditions (AERONET AOD less than 0.15).Linear regressions between Terra and AERONET possess statistically-different slopes for AOD < 0.15 and AOD > or = 0.15. AERONET AOD measured only during MODIS overpass hours is highly correlated with daily-averaged AERONET AOD. MODIS monthly-averaged AOD also tracks that of AERONET over the study period. These results indicate that MODIS is sensitive to the day-to-day variability, as well as the annual cycle of AOD over the Appalachian State AERONET site. The complex topography and high seasonality in AOD and vegetation indices allow us to specifically evaluate MODIS dark target algorithm surface albedo and aerosol model assumptions at a regionally-representative SE US mountain site.

air quality↗

Restoring the Dunes: Using Satellite Imagery to Help Restore Turtle Nesting Grounds In Puerto Rico After Hurricane Maria

The North coast of Puerto Rico sustained heavy damage from Hurricane Maria and other subsequent tropical storms. This damage included erosion of beaches and foredunes. The foredunes are a delicate ecological environment, which provides important nesting grounds for endangered turtles. Local ecologists have been working to restore these dunes with mixed results. Presented here is an evaluation of dune restoration sites, and strategies to improve the success of subsequent restoration efforts. This involves both historical satellite image analysis and field work to evaluate sediment migration pathways. Local ecologists use a technique called Biomimicry to restore dunes. This involves inserting sticks or plants into the ground, simulating the effects of natural vegetation to slow wind speeds and deposit wind-blown sand. Manually planted vegetation can follow to stabilize the trapped sand. While often successful, this technique occasionally fails to accumulate significant amounts of sand. Satellite imagery shows that one of the controlling factors is the orientation of the dune and beach to the prevailing wind. Dunes that are oriented parallel to the prevailing wind are relatively slower-growing due to sediment bypass. Satellite imagery also indicates that the fastest growing dunes are in close proximity to major sediment sources. This is complicated by large dams, which limit the amount of sediment delivered to the coast. Field observation shows that biomimicry matrices are occasionally located too close to the swash zone, where storms over-top the dunes, poisoning stabilizing vegetation with salt water. Another common observation was that many dunes were starting to form behind fallen trees, suggesting that a different type of biomimicry might be successful. Satellite and field observation suggest that strategies to protect nearshore environments and improve dune restoration biomimicry efforts include: 1) orient biomimicry matrices at a higher angle to prevailing winds. 2) Prioritize sites near river mouths, particularly those without upstream dams. 3) Test other orientations of biomimicry, such as horizontal boards to mimic fallen trees. 4) Improve sediment supply by preventing further dam development, and releasing trapped sediment.

Paul Bremner↗

Field Data Collection: an Essential Element in Remote Sensing Applications

Field data collected in support of remote sensing projects are generally used for the following purposes: (1) calibration of remote sensing systems, (2) evaluation of experimental applications of remote sensing imagery on small test sites, and (3) designing and evaluating operational regional resource studies and inventories which are conducted using the remote sensing imagery obtained. Field data may be used to help develop a technique for a particular application, or to aid in the application of that technique to a resource evaluation or inventory problem for a large area. Scientists at the Forestry Remote Sensing Laboratory have utilized field data for both purposes. How meaningful field data has been collected in each case is discussed.

Pettinger, L. R.↗

Terrestrial central station array life-cycle analysis support study

Plant elements evaluated included designs for module, panel and array structures, as well as balance-of-plant systems. Installation and maintenance procedures and the impact of site environment were also evaluated. In terms of the cost of energy produced, the horizontal array configuration was found to be less expensive than the tandem array at latitudes less than 40 deg. Both of these configurations are less expensive than the rack design. However, the costs of energy for all three configurations are within approximately ?10 percent of each other. For flat plate panels, the seasonally adjusted and tracking array configurations are not economically attractive when compared to the three other designs. Balance-of-plant costs are approximately equal to (goal) module costs. The array structures and foundations are the most expensive items in the balance-of-plant costs.

Source record↗

Basalt generation at the Apollo 12 site. Part 1: New data, classification, and re-evaluation

New data are reported from five previously unanalyzed Apollo 12 mare basalts that are incorporated into an evaluation of previous petrogenetic models and classification schemes for these basalts. This paper proposes a classification for Apollo 12 mare basalts on the basis of whole-rock Mg# (molar 100*(Mg/(Mg+Fe))) and Rb/Sr ratio (analyzed by isotope dilution), whereby the ilmenite, olivine, and pigeonite basalt groups are readily distinguished from each other. Scrutiny of the Apollo 12 feldspathic 'suite' demonstrates that two of the three basalts previously assigned to this group (12031, 12038, 12072) can be reclassified: 12031 is a plagioclase-rich pigeonite basalt; and 12072 is an olivine basalt. Only basalt 12038 stands out as a unique sample to the Apollo 12 site, but whether this represents a single sample from another flow at the Apollo 12 site or is exotic to this site is equivocal. The question of whether the olivine and pigeonite basalt suites are co-magmatic is addressed by incompatible trace-element chemistry: the trends defined by these two suites when Co/Sm and Sm/Eu ratios are plotted against Rb/Sr ratio demonstrate that these two basaltic types cannot be co-magmatic. Crystal fractionation/accumulation paths have been calculated and show that neither the pigeonite, olivine, or ilmenite basalts are related by this process. Each suite requires a distinct and separate source region. This study also examines sample heterogeneity and the degree to which whole-rock analyses are representative, which is critical when petrogenetic interpretation is undertaken. Sample heterogeneity has been investigated petrographically (inhomogeneous mineral distribution) with consideration of duplicate analyses, and whether a specific sample (using average data) plots consistently upon a fractionation trend when a number of different compostional parameters are considered. Using these criteria, four basalts have been identified where reported analyses are not representative of the whole-rock composition: 12005, an ilmenite basalt; 12006 and 12036, olivine basalts; and 12031 previously classified as a feldspathic basalt, but reclassified as part of the pigeonite suite.

Neal, Clive R.↗

Evaluation of DVD-R for Archival Applications

For more than a decade, CD-ROM and CD-R have provided an unprecedented level of reliability, low cost and cross-platform compatibility to support federal data archiving and distribution efforts. However, it should be remembered that years of effort were required to achieve the standardization that has supported the growth of the CD industry. Incompatibilities in the interpretation of the ISO-9660 standard on different operating systems had to be dealt with, and the imprecise specifications in the Orange Book Part n and Part Hi led to incompatibilities between CD-R media and CD-R recorders. Some of these issues were presented by the authors at Optical Data Storage '95. The major current problem with the use of CD technology is the growing volume of digital data that needs to be stored. CD-ROM collections of hundreds of volumes and CD-R collections of several thousand volumes are becoming almost too cumbersome to be useful. The emergence of Digital Video Disks Recorder (DVD-R) technology promises to reduce the number of discs required for archive applications by a factor of seven while providing improved reliability. It is important to identify problem areas for DVD-R media and provide guidelines to manufacturers, file system developers and users in order to provide reliable data storage and interchange. The Data Distribution Laboratory (DDL) at NASA's Jet Propulsion Laboratory began its evaluation of DVD-R technology in early 1998. The initial plan was to obtain a DVD-Recorder for preliminary testing, deploy reader hardware to user sites for compatibility testing, evaluate the quality and longevity of DVD-R media and develop proof-of-concept archive collections to test the reliability and usability of DVD-R media and jukebox hardware.

Martin, Michael D.↗

Preliminary geologic evaluation of L-band radar imagery: Arkansas test site

The relatively small angles of incidence (steep depression angles) of the L-band system provide minimal shadowing on terrain back-slopes and considerable foreshortening on terrain fore-slopes which sacrifice much of the topographic enhancement afforded by a more oblique angle of illumination. In addition, the dynamic range of the return from vegetated surfaces is substantially less for the L-band system, and many surface features defined primarily by subtle changes in vegetation are lost. In areas having terrain conditions similar to those of northern Arkansas, and where LANDSAT and shorter wavelength aircraft radar data are available, the value of the JPL L-band imagery as either a complimentary or supplementary geologic data source is not obvious.

Macdonald, H.↗

Photovoltaic system criteria documents. Volume 3: Environmental issues and evaluation criteria for photovoltaic applications

The environmental issues and evaluation criteria relating to the suitability of sites proposed for photovoltaic (PV) system deployment are identified. The important issues are defined, briefly discussed and then developed into evaluation criteria. System designers are provided with information on the environmental sensitivity of PV systems in realistic applications, background material which indicates the applicability of the siting issues identified, and evaluation criteria are defined to facilitate the selection of sites that maximize PV system operation.

Koenig, John C.↗

Evaluation of Ocean Color Scanner (OCS) photographic and digital data: Santa Barbara Channel test site, 29 October 1975 overflight

A summary of Ocean Color Scanner data was examined to evaluate detection and discrimination capabilities of the system for marine resources, oil pollution and man-made sea surface targets of opportunity in the Santa Barbara Channel. Assessment of the utility of OCS for the determination of sediment transport patterns along the coastal zone was a secondary goal. Data products provided 1975 overflight were in digital and analog formats. In evaluating the OCS data, automated and manual procedures were employed. A total of four channels of data in digital format were analyzed, as well as three channels of color combined imagery, and four channels of black and white imagery. In addition, 1:120,000 scale color infrared imagery acquired simultaneously with the OCS data were provided for comparative analysis purposes.

Kraus, S. P.↗

Second Evaluation of Job Queuing/Scheduling Software

The recent proliferation of high performance workstations and the increased reliability of parallel systems have illustrated the need for robust job management systems to support parallel applications. To address this issue, NAS compiled a requirements checklist for job queuing/scheduling software. Next, NAS evaluated the leading job management system (JMS) software packages against the checklist. A year has now elapsed since the first comparison was published, and NAS has repeated the evaluation. This report describes this second evaluation, and presents the results of Phase 1: Capabilities versus Requirements. We show that JMS support for running parallel applications on clusters of workstations and parallel systems is still lacking, however, definite progress has been made by the vendors to correct the deficiencies. This report is supplemented by a WWW interface to the data collected, to aid other sites in extracting the evaluation information on specific requirements of interest.

Jones, James Patton↗

Hydrogen Generation Through Renewable Energy Sources at the NASA Glenn Research Center

An evaluation of the potential for generating high pressure, high purity hydrogen at the NASA Glenn Research Center (GRC) was performed. This evaluation was based on producing hydrogen utilizing a prototype Hamilton Standard electrolyzer that is capable of producing hydrogen at 3000 psi. The present state of the electrolyzer system was determined to identify the refurbishment requirements. The power for operating the electrolyzer would be produced through renewable power sources. Both wind and solar were considered in the analysis. The solar power production capability was based on the existing solar array field located at NASA GRC. The refurbishment and upgrade potential of the array field was determined and the array output was analyzed with various levels of upgrades throughout the year. The total available monthly and yearly energy from the array was determined. A wind turbine was also sized for operation. This sizing evaluated the wind potential at the site and produced an operational design point for the wind turbine. Commercially available wind turbines were evaluated to determine their applicability to this site. The system installation and power integration were also addressed. This included items such as housing the electrolyzer, power management, water supply, gas storage, cooling and hydrogen dispensing.

Colozza, Anthony↗

EO-1 Hyperion Reflectance Time Series at Calibration and Validation Sites: Stability and Sensitivity to Seasonal Dynamics

This study evaluated Earth Observing 1 (EO-1) Hyperion reflectance time series at established calibration sites to assess the instrument stability and suitability for monitoring vegetation functional parameters. Our analysis using three pseudo-invariant calibration sites in North America indicated that the reflectance time series are devoid of apparent spectral trends and their stability consistently is within 2.5-5 percent throughout most of the spectral range spanning the 12-plus year data record. Using three vegetated sites instrumented with eddy covariance towers, the Hyperion reflectance time series were evaluated for their ability to determine important variables of ecosystem function. A number of narrowband and derivative vegetation indices (VI) closely described the seasonal profiles in vegetation function and ecosystem carbon exchange (e.g., net and gross ecosystem productivity) in three very different ecosystems, including a hardwood forest and tallgrass prairie in North America, and a Miombo woodland in Africa. Our results demonstrate the potential for scaling the carbon flux tower measurements to local and regional landscape levels. The VIs with stronger relationships to the CO2 parameters were derived using continuous reflectance spectra and included wavelengths associated with chlorophyll content and/or chlorophyll fluorescence. Since these indices cannot be calculated from broadband multispectral instrument data, the opportunity to exploit these spectrometer-based VIs in the future will depend on the launch of satellites such as EnMAP and HyspIRI. This study highlights the practical utility of space-borne spectrometers for characterization of the spectral stability and uniformity of the calibration sites in support of sensor cross-comparisons, and demonstrates the potential of narrowband VIs to track and spatially extend ecosystem functional status as well as carbon processes measured at flux towers.

Calibration↗

Regional Rates of Young US Forest Growth Estimated From Annual Landsat Disturbance History and IKONOS Stereo Imagery

Forests of the Contiguous United States (CONUS) have been found to be a large contributor to the global atmospheric carbon sink. The magnitude and nature of this sink is still uncertain and recent studies have sought to define the dynamics that control its strength and longevity. The Landsat series of satellites has been a vital resource to understand the long-term changes in land cover that can impact ecosystem function and terrestrial carbonstock. We combine annual Landsat forest disturbance history from 1985 to 2011 with single date IKONOS stereoimagery to estimate the change in young forest canopy height and above ground live dry biomass accumulation for selected sites in the CONUS. Our approach follows an approximately linear growth rate following clearing over short intervals and does not estimate the distinct non-linear growth rate over longer intervals.We produced canopy height models by differencing digital surface models estimated from IKONOS stereo pairs with national elevation data (NED). Correlations between height and biomass were established independently using airborne LiDAR, and then applied to the IKONOS-estimated canopy height models. Graphing current biomass against time since disturbance provided biomass accumulation rates. For 20 study sites distributed across five regions of the CONUS, 19 showed statistically significant recovery trends (p is less than 0.001) with canopy growth from 0.26 m yr-1to 0.73 m yr-1. Above ground live dry biomass (AGB) density accumulation ranged from 1.31 t/ha yr-1 to 12.47 t/ha yr-1. Mean forest AGB accumulationwas 6.31 t/ha yr-1 among all sites with significant growth trends. We evaluated the accuracy of our estimates by comparing to field estimated site index curves of growth, airborne LiDAR data, and independent model predictions of C accumulation. Growth estimates found with this approach are consistent with site index curves and total biomass estimates fall within the range of field estimates. This is aviable approach to estimate forest biomass accumulation in regions with clear-cut harvest disturbances.

Neigh, Christopher S. R.↗

Laboratory Investigations

The primary objectives were to examine the site-specific physical, chemical, and biological factors that impact construction, durability and performance of the proposed 5-MW (sub e) solar pond system at the Salton Sea. The interactions of the water, salt, and soil of the site and on material compatibility were examined. Potential interactions of the water/brine and soil are particularly important because the pond will utilize the naturally occurring clays as a bottom seal. Although there is a considerable and growing solar pond literature, little written information deals with the important site-specific investigations of water, salt, and soil. Therefore, technical effort was directed toward identifying the factors that should be investigated and determining methods of investigation. As a result, a by-product was the development of an approach for site-specific investigations and some specific methodologies. This development should continue in order to establish a generic approach for evaluating the suitability of any site for the construction of large-scale solar ponds.

Source record↗

Analysis of space tug operating techniques supplemental report (study 2.4)

An analysis of space tug operating techniques is presented. The subjects discussed are: (1) sustaining engineering requirements, (2) off-site facility requirements, (3) evaluation of tug checkout alternatives, and (4) spares provisioning. Tables of data are included to clarify the written presentation.

Source record↗