Search NASA⌕ Search

SEARCH · Search NASA

Results for “small lasers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Laser Cutting and Micromachining for Localized and Targeted Solar Cell Characterization

Laser cutting and micromachining can be applied to solar cell materials for processing and characterization applications. An ultrashort pulse (USP) laser with sub-picosecond pulse width can remove material with minimal thermal effects or damage, which is termed `cold ablation'. Such USP laser cutting and scribing can be implemented for isolating areas within a larger cell while maintaining electrical performance and preventing laser-induced damage and shunting. Laser micromachining has been used to isolate a shunt to improve cell performance and to isolate a small, selected area to define a sample suitable for deep level transient spectroscopy.

14 SOLAR ENERGY↗
DOE OSTI2021

Single and Double Shell Ignition Targets for the National Ignition Facility at 527 nm

Converting and using the National Ignition Facility (NIF) to deliver 527 nm light instead of its current 351 nm would allow the laser to deliver more energy and power to ignition targets. We update previous 527 nm target design work to reflect more contemporary target designs using high-density carbon capsules and low density helium gas filled Hohlraums. We extend single shell capsule designs based on current experimental results to higher energy and power and also explore double shell capsules, both driven by green light. These studies were completed using detailed pulse shapes found for targets that converged with acceptable 2D implosion symmetries and then used the Lava Lamp II code to confirm their feasibility at NIF. A 1.2× dimensional scaleup of one tuned NIF target at the limit of its current 351 nm capabilities and shot 170827 uses 3.3 MJ, at the limit of the current NIF's 527 nm capability. With the less-structured pulse of a double shell target, 3.7 MJ could be delivered by the laser. Our LPI calculations do not preclude operation at 527 nm, particularly for low fill Hohlraums, and suggest that the stimulated Raman backscatter may be no worse than the small quantities seen in 170827; stimulated forward Raman scattering may be present. If Stimulated Brillouin Scattering is too great, the much greater laser bandwidth available at 527 nm could be used to decrease backscatter. These larger targets with higher energy and power may offer a better chance of achieving ignition with only modest changes to the NIF laser.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Flow visualization in high-energy-density laboratory plasmas

Flow visualization is often essential for evaluating high-energy-density (HED) laboratory plasmas, examining their dynamics, and assessing design strategies. However, imaging at fine phenomenological flow scales is a major challenge. Here, a zone-plate–based radiography system tailored for applications in HED physics is demonstrated. The burst-mode radiography system combines a dual-flash laser-generated x-ray source, a high-magnification zone plate optic, and a multiple frame hybrid complementary metal-oxide-semiconductor (hCMOS) sensor for image detection. Operating at a magnification of 42 x⁠, a pair of radiographs is measured in rapid succession, each time gated by a 4.75 keV flash of x rays lasting 100 ps. The system achieves a spatial resolution below 3 μm. The potential of this approach for applications in HED physics is exemplified by observing small-scale spike morphologies at a pusher-foam interface impacted by a strong, laser-driven blast wave.

Flow instabilities↗
DOE OSTI2023

Studies of Laser-Driven Flyer Acceleration Using Optical Fiber Coupling [Book Chapter]

An optically recording velocity interferometer system has been used to measure acceleration histories and maximum velocities for laser-driven aluminum foil targets launched from the output face of optical fibers. Peak flyer velocities have been determined as a function of various parameters, including driving laser fluence, laser pulse duration and target thickness. The results at high fluences are consistent with a nearly constant efficiency of coupling optical energy into flyer kinetic energy and a small ablated mass fraction; however, the coupling efficiency falls off rapidly at fluences < 15 J-cm -2 . Measurement of the time delay between laser pulse arrival at the target and the onset of flyer motion have also been performed. Significant delays are observed at low fluences, arising from the increased time required for plasma formation at the fiber/foil interface under these conditions.

440600 -- Optical Instrumentation-- (1990-)↗
DOE OSTI2025

Spatial metabolomics and lipidomics in kidney disease

Kidney disease is a global health issue that affects over 850 million people, and early detection is key to preventing severe disease and complications. Kidney diseases are associated with complex dysregulation of lipid metabolism. Spatial metabolomics through mass spectrometry imaging (MSI) enables spatial mapping of the lipids in tissue and includes a variety of techniques that can be used to image lipids. In the kidney MSI studies often seek to resolve individual functional tissue units such as glomeruli and proximal tubules. Several different MSI techniques such as matrix-assisted laser desorption/ionization and desorption electrospray ionization have been used to characterize lipids and small molecules in chronic kidney disease, acute kidney injury, genetic kidney disease, and cancer. In this review we provide several examples of how spatial metabolomics data can provide critical information concerning localization of changes in disease states. Additionally, when combined with pathology, measurements, transcriptomics, or proteomics, the metabolomic changes can illuminate underlying mechanisms and provide new clinical insights.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Shock ignition and deflagration growth in plastic-bonded TATB (1, 3, 5-trinitro-2, 4, 6-triaminobenzene) microstructures

TATB (1,3,5-triamino-2,4,6-trinitrobenzene) plastic-bonded explosives (PBX) were shocked with laser-launched flyer plates. The spectral radiance of the emitted light from a small portion of the microstructure (a “microenvironment”) containing a small number of TATB particles with an estimated mass of 150 ng was measured every 0.8 ns from 1 ns to 200 μs and was analyzed to give radiance and time-dependent graybody temperatures. By fabricating an array with 186 PBX charges, we could obtain ≥15 shots at each of 12 velocities between 1.8 and 4.7 km/s. We found that every microenvironment generated a unique radiance fingerprint. Some of these microenvironments were much more reactive than average. The radiance has two peaks around 20 ns and 5 μs, associated with shock ignition and deflagration growth. In our interpretation, the shock creates an ensemble of hot spots of various sizes and temperatures. Of those hot spots that ignite, only a small portion, at about 2200 K, was large enough and hot enough to survive long enough (>100 ns) to ignite individual TATB particles, leading to deflagration. Integrating various time intervals of the radiance can quantify the strength of the shock–PBX interaction, and the decay and growth of the hot spot ensemble and the deflagration.

Akhtar, Meysam (ORCID:0000000243897837)↗
DOE OSTI2021

Two-dimensional retrieval methods for ultrafast imaging of molecular structure using laser-induced electron diffraction

Molecular structural retrieval based on electron diffraction has been proposed to determine the atomic positions of molecules with sub-angstrom spatial and femtosecond temporal resolutions. Given its success on small molecular systems, in this work, we point out that the accuracy of structure retrieval is constrained by the availability of a wide range of experimental data in the momentum space in all molecular systems. To mitigate the limitations, for laser-induced electron diffraction, here we retrieve molecular structures using two-dimensional (energy and angle) electron momentum spectra in the laboratory frame for a number of small molecular systems, which have previously been studied with 1D methods. Compared to the conventional single-energy or single-angle analysis, our 2D methods effectively expand the momentum range of the measured data. Besides utilization of the 2D data, two complementary methods are developed for consistency check on the retrieved results. Further, the 2D nature of our methods also offers a way of estimating the error from retrieval, which has never been explored before. Comparing with results from prior experiments, our findings show evidence that our 2D methods outperform the conventional 1D methods. Paving the way to the retrieval of large molecular systems, in which their tunneling ionization rates are challenging to obtain, we estimate the error of using the isotropic model in place of including the orientation-dependent ionization rate.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Luminescence of Xe{sub 2}Cl{sup *} upon laser excitation of Cl{sub 2} – Xe mixtures in a wide pressure range

The luminescence of Xe{sub 2}Cl{sup *} excimer upon optical excitation of high-pressure Cl{sub 2} – Xe mixtures by XeCl laser pulses (λ = 308 nm) with different energies is investigated. It is shown that small-signal gain of the Xe{sub 2}Cl amplifier may reach ∼1.3 × 10{sup −1} cm{sup −1} in a mixture of Cl{sub 2} and Xe with partial pressures of 4 Torr and 9 atm, respectively, and an excitation fluence of 10{sup 26} photons cm{sup −2} s{sup −1}. (active media)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Fast ignition inertial fusion energy using laser-driven ion beams

Ion fast ignition (IFI), or fusion fast ignition initiated by a laser-driven ion beam, is a promising path to high-gain inertial fusion energy (IFE). In IFI, cold, dense deuterium-tritium (DT) fuel is first assembled using lasers or pulsed power drivers. Then, a high-power ion beam is focused onto a small volume within the fuel (the hot spot), heating the fuel rapidly to conditions where fusion ignition takes place. Fusion burn in this hot spot propagates to the fuel surrounding the hot spot, leading to burnup of a significant fraction of this fuel and the possibility of high gain (G~100), as needed for inertial fusion energy. IFI uses separate drivers for the two basic elements, fuel compression and ignition, allowing maximum control and optimization of each. On the other hand, conventional laser fusion uses multiple beams of the same driver to compress the fuel and shock-heat its very center to ignite a burn wave. Despite impressive progress in conventional laser fusion, the precise spatial symmetry, temporal pulse shaping and timing required for high gain and IFE remain a serious unmet challenge.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Determining the Effects of Neutron Irradiation on the Structural Integrity of Additively Manufactured Heat Exchangers for Very Small Modular Reactor Applications, DOE Final Report (Project # 19-16980)

Auburn University (AU) teamed with the University of Missouri Research Reactor (MURR) and Kansas State University (KSU) to determine how to best use laser-powder bed fusion (L-PBF) additive manufacturing (AM) methods for generating radiation resistant nickel-based superalloys, Inconel alloy 625 and 718, for special purpose reactor (SPR) or very small modular reactor (vSMR) heat-exchangers (HeXs). Compact, conformal, and durable HeXs that are tolerant of extreme environments are needed for supporting the technical maturity of next-generation, portable compact reactors. AM is an enabler for realizing this new wave of HeXs – providing a means to make customizable hot and cold stream architectures with novel flow path geometries (e.g., tortuous channels with non-uniform, asymmetric cross-sections) and reduced layer-to-layer contact resistance (i.e., no separate bonding procedure required). AM further enables a more time/cost efficient means for fabricating SPRs by reducing the number of suppliers required for HeX assembly and allowing for on-site HeX fabrication. The project aim has been to better understand how neutron irradiation affects the microstructure and properties of additively manufactured nickel-based superalloys, to accelerate their safe, reliable use in the modular reactor industry. The major objective was to qualify/quantify the microstructure and microhardness of nickel-based superalloys (including Inconel 718 and 625) additively manufactured via the L-PBF process in the neutron-dosed (irradiated) and non-irradiated states over a course of 3 years. Effects of build orientation during L-PBF and post-AM heat treatments on neutron resistance, microstructure and mechanical properties were also investigated. Neutron damage mechanisms via hardening were characterized. This project combined subject-matter experts in AM, mechanical/microstructure metallic part characterization, and neutron irradiation, as well as unique assets and capabilities at AU and MURR at MU, to ensure project results translated to effectively addressing known gaps in nuclear science and engineering. Parts were fabricated using L-PBF systems readily available at AU. Specimens were then irradiated using MURR facilities; a manipulator equipped hot cell was also used to measure material hardness after dosing. MURR, a 10 MW, light-water nuclear reactor, is the largest, highest powered, highest-flux university owned research reactor in the U.S. The major findings in this project provide evidence that AM can serve as an alternative way to build structural components for future advanced small modular reactors using advanced materials like Inconel 625 (IN625) or Inconel 718 (IN718). After full spectrum neutron irradiation, vertically as-built AM IN625 samples were observed to display better resistance towards radiation-induced-hardening defects relative to traditionally machined metals. A Vickers microhardness tester, using settings of 1 kgf and dwell time of 15 seconds per indentation, was used to measure hardness in this study. The as-built, vertically printed samples experienced 1.2% of radiation hardening vs. 5.25% radiation hardening observed in wrought IN625. Another set of IN625 and IN718 samples were exposed to fast neutron irradiation. It was observed that IN718 showed more resistance towards radiation hardening compared to IN625 samples indicating IN718 had a better performance. Results showed that the IN718 samples experienced less change (-2.5 to 3.24 %) in microhardness. On the other hand, IN625 samples underwent more (0.9 to 7.21%) change in microhardness after fast neutron irradiation. AM IN625 samples were irradiated using an ion (proton) beam in cyclotron. The mechanical properties of AM samples post irradiation were compared with wrought samples. The irradiated region on the samples were tested using nano-hardness indention. It was observed that the beam current and time used in this study generated an annealing effect and thus reduced the hardness of the samples. The sum of the project results provide precious insight into how one may minimize radiation hardening in AM materials while maintaining material property constraints. Results should assist engineers in selecting an appropriate heat treatment for AM nickel-based superalloys for increased radiation resistance. Results should increase confidence levels for adopting AM for building nuclear reactor components which perform the same or better than conventionally manufactured components. Fast neutron irradiation testing provided an accelerated means of obtaining radiation effects without making materials radioactive and difficult to handle.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Strong mutual increase in the efficiency of isotope-selective laser IR dissociation of molecules under nonequilibrium thermodynamic conditions of the compression shock under irradiation in a bimolecular mixture

We have revealed a strong (by a factor of 2 to 5) mutual increase in the yield of IR molecular dissociation (by the example of CF{sub 2}HCl and CF{sub 3}Br) and a significant (by a factor of 1.5 to 3) lowering of dissociation thresholds in the nonequilibrium thermodynamic conditions of compression shock in the irradiation of the molecules by resonance IR laser radiation in the bimolecular mixture in comparison with their individual irradiation. This opens up the possibility to perform efficient isotope-selective IR dissociation of molecules at lower excitation energy densities (Φ ⩽ 1.5 – 2.0 J cm{sup −2}) and thereby to improve the dissociation selectivity. This was demonstrated by the example of chlorine- and bromine-isotope selective dissociation of the specified molecules, which are characterised by quite small (less than 0.25 cm{sup −1}) isotope shifts in the IR vibrational absorption spectra excited by laser radiation. The enrichment coefficients K {sub enr}({sup 35}Cl / {sup 37}Cl) = 0.90 ± 0.05 in the residual CF{sub 2}HCl gas and K {sub enr}({sup 79}Br / {sup 81}Br) in the resultant Br{sub 2} product are obtained when the CF{sub 2}HCl : CF{sub 3}Br = 1 : 1 molecular mixture and CF{sub 3}Br molecules, respectively, are irradiated by the 9R(30) CO{sub 2} laser line (frequency, 1084.635 cm{sup −1}) at an energy density Φ ≈ 1.3 J cm{sup −2}. (laser isotope separation)

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-resolution x-ray radiography with Fresnel zone plates on the University of Rochester’s OMEGA Laser Systems

Experiments performed at the Laboratory for Laser Energetics with a continuous-wave (cw) x-ray source and on the OMEGA and OMEGA EP Laser Systems have utilized a Fresnel zone plate (FZP) to obtain x-ray images with a spatial resolution as small as ~1.5 μm. Such FZP images were obtained with a charge-coupled device or a framing camera at energies ranging from 4.5 keV to 6.7 keV using x-ray line emission from both the cw source and high-intensity, laser-beam–illuminated metal foils. In all cases, the resolution test results are determined from patterns and grids backlit by these sources. Here, the resolutions obtained are shown to be due to a combination of the spectral content of the x-ray sources and detector resolution limited by the magnification of the images (14× to 22×). High-speed framing cameras were used to obtain FZP images with frame times as short as ~30 ps. Double-shell implosions on OMEGA were backlit by laser-irradiated Fe foils, thus obtaining a framing-camera–limited, FZP-image resolution of ~3 μm–4 μm.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Controlled Assembly of Upconverting Nanoparticles for Low-Threshold Microlasers and Their Imaging in Scattering Media

Micron-sized lasers fabricated from upconverting nanoparticles (UCNP) coupled to whispering gallery mode (WGM) microresonators can exhibit continuous-wave anti-Stokes lasing useful for tracking cells, environmental sensing, and coherent stimulation of biological activity. The integration of these microlasers into organisms and microelectronics requires even smaller diameters, however, which raises threshold pump powers beyond practical limits for biological applications. To meet the need for low lasing thresholds and high fidelity fabrication methods, we use correlative optical and electron microscopy to uncover the nanoparticle assembly process and structural factors that determine efficient upconverted lasing. We show that 5 μm microspheres with controlled submonolayer UCNP coatings exhibit, on average, 25-fold lower laser thresholds (1.7 ± 0.7 kW/cm 2 ) compared to the mean values of the lowest threshold UCNP lasers, and variability is reduced 30-fold. WGMs are observed in the upconversion spectra for TiO 2 -coated microspheres as small as 3 μm, a size at which optical losses had previously prevented such observations. Finally, we demonstrate that the WGM signatures of these upconverting microlasers can be imaged and distinguished through tissue-mimicking phantoms. These advances will enable the fabrication of more efficient upconverting lasers for imaging, sensing, and actuation in optically complex environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nucleophilic Displacement Reactions of Silver-Based Metal–Organic Chalcogenolates

Here, we report nucleophilic displacement reactions that can increase the dimensionality or coordination number of silver-based metal–organic chalcogenolates (MOChas). MOChas are crystalline ensembles containing one-dimensional (1D) or two-dimensional (2D) inorganic topologies with structures and properties defined by the choice of metal, chalcogen, and ligand. MOChas can be readily prepared from a variety of small-molecule ligands and metals or metal ions. Although MOChas offer ligand diversity, most reported examples use relatively small ligands, typically involving short alkyl chains, aryl rings, or molecular cages. This is because larger, more complex molecules often yield poor product morphologies with indeterminate structures. In this study, we overcame this limitation by employing a ligand exchange strategy whereby a 1D MOCha, silver(I) methyl 2-mercaptobenzoate (2MMB), is used as a silver source for preparing 2D examples. The reaction proceeds generally toward products composed of the stronger nucleophile. We show that the reaction prefers displacing 1D topologies to yield 2D ones and replacing thiolates with selenolates. We performed a study to characterize the mechanism by which organic chalcogenols and dichalcogenides exchange with MOChas. The collected data and product analysis support a proposed mechanism of nucleophilic substitution, explaining how both organic chalcogenols and dichalcogenides can displace ligands in MOChas. This work provides a new synthetic route that will enable the preparation of more elaborate MOChas and heterostructures thereof. This approach enabled the preparation of previously inaccessible oligophenyl MOChas, which were successfully solved via small-molecule serial femtosecond crystallography (smSFX) at the SPring-8 Ångström Compact Free Electron LAser (SACLA) facility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Imaging a light-induced molecular elimination reaction with an X-ray free-electron laser

Tracking the motion of individual atoms during chemical reactions represents a severe experimental challenge, especially if several competing reaction pathways exist or if the reaction is governed by the correlated motion of more than two molecular constituents. Here we demonstrate how ultrashort X-ray pulses combined with coincident ion imaging can be used to trace molecular iodine elimination from laser-irradiated diiodomethane (CH 2 I 2 ), a reaction channel of fundamental importance but small relative yield that involves the breaking of two molecular bonds and the formation of a new one. We map bending vibrations of the bound molecule, disentangle different dissociation pathways, image the correlated motion of the iodine atoms and the methylene group leading to molecular iodine ejection, and trace the vibrational motion of the formed product. Our results provide a quantitative mechanistic picture behind previously suggested reaction mechanisms and prove that a variety of geometries are involved in the molecular bond formation.

Atomic and molecular interactions with photons↗
DOE OSTI2021

Strong-field ionization of water. II. Electronic and nuclear dynamics en route to double ionization

We investigate the role of nuclear motion and strong-field-induced electronic couplings during the double ionization of deuterated water using momentum-resolved coincidence spectroscopy. By examining the three-body dicationic dissociation channel, D$^{+}$/D$^{+}$/O, for both few- and multi-cycle laser pulses, strong evidence for intra-pulse dynamics is observed. The extracted angle- and energy-resolved double ionization yields are compared to classical trajectory simulations of the dissociation dynamics occurring from different electronic states of the dication. In contrast with measurements of single photon double ionization, pronounced departure from the expectations for vertical ionization is observed, even for pulses as short as 10~fs in duration. We outline numerous mechanisms by which the strong laser field can modify the nuclear wavefunction en-route to final states of the dication where molecular fragmentation occurs. Specifically, we consider the possibility of a coordinate-dependence to the strong-field ionization rate, intermediate nuclear motion in monocation states prior to double ionization, and near-resonant laser-induced dipole couplings in the ion. These results highlight the fact that, for small and light molecules such as D$_2$O, a vertical-transition treatment of the ionization dynamics is not sufficient to reproduce the features seen experimentally in the strong field coincidence double-ionization data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

High-Spectral Resolution Lidar (HSRL) Instrument Handbook

High-spectral-resolution lidar (HSRL) systems provide vertical profiles of optical depth, backscatter cross-section, depolarization, and backscatter phase function. All HSRL measurements are calibrated by reference to molecular scattering, which is measured at each point in the lidar profile. Like the Raman lidar (RL), but unlike simple backscatter lidars such as the micropulse lidar (MPL), this enables the HSRL to measure backscatter cross-sections and optical depths without prior assumptions about the scattering properties of the atmosphere. The depolarization observations allow robust discrimination between ice and water clouds. Rigorous error estimates can be computed for all measurements. A very narrow angular field of view reduces multiple scattering contributions. The small field of view, coupled with a narrow optical bandwidth, nearly eliminates noise due to scattered sunlight. The laser transmitter is a diode-pumped, frequency-doubled Nd:YAG laser. Narrow-band, single-frequency operation is provided by injection seeding with a single-frequency, cw-diode-pumped diode laser. The main laser cavity is maintained in resonance with the seed laser by adjusting the cavity length to minimize the time between the Q-switch trigger and the emission of the laser pulse. The emission wavelength is tuned via temperature control of the seed laser crystal and is locked to line #1109 of the iodine absorption spectra. Locking is accomplished by minimizing the transmission through a 2-cm-long iodine absorption cell. Use of a high-repetition-rate laser and expansion of the transmitted beam through a 400-mm telescope reduces the transmitted energy density to eye-safe levels. It is possible to look directly into the output beam without hazard. The receiver and transmitter use the same afocal telescope, simplifying the maintenance of stable alignment of the transmitter and receiver although the angular FOV is only 100 μrad. The small FOV and the 4-kHz repetition rate also limit the near-field signal strength, making it possible to record continuous profiles that start at an altitude of ~100 m and extend to 30 km using photon counting detectors. The small FOV also suppresses multiple scattering contributions.

54 ENVIRONMENTAL SCIENCES↗