Search NASA⌕ Search

SEARCH · Search NASA

Results for “so2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Effects of Different Stratospheric SO2 Injection Altitudes on Stratospheric Chemistry and Dynamics

Strategic geoengineering has been proposed to reduce some of the known side effects of stratospheric aerosol modifications. Specific climate goals could be reached depending on design choices of stratospheric sulfur injections by latitude, altitude, and magnitude. Here we explore in detail the stratospheric chemical and dynamical responses to injections at different altitudes using a fully coupled state-of-the-art climate model. Two different sce-narios are explored that produce approximately the same global cooling of 2?C over the period 2042 – 49, a high altitude injection case using 24 Tg SO2 yr-1 at 30 hPa (˜ 25km altitude), and a low altitude injection case using 32 Tg SO2 yr-1 injections at 70 hPa (˜ 20 km altitude), with annual injections divided equally between 15?N and 15?S. Both cases result in a warming of the lower tropical stratosphere up to 10 and 15?C for the high and low altitude injection case and in substantial increase of water vapor of 2 and 4 ppm, respectively, compared to no geoengineering conditions. Polar column ozone in the Northern Hemisphere is reduced by up to 18% in March for the high altitude injection case and up to 8% for the low altitude injection case. However, for winter mid- and high northern latitudes, low altitude injections result in column ozone greater than without geoengineering. These changes are mostly driven by dynamics and advection. Antarctic column ozone in 2040-49 does not recover from present day values for both cases.

Tilmes, S↗

Molecular mechanism of CO2 and SO2 molecules binding to the air/liquid interface of 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid: A Molecular dynamics study with polarizable potential models

Molecular dynamics simulations with many-body interactions were carried out to understand the bulk and interfacial absorption of gases in 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4). A new polarizable molecular model was developed for BMIMBF4, which was found to give the correct liquid density, but also had good agreement with experiment for its surface tension and X-ray reflectivity. The potential of mean force of CO2 and SO2 were calculated across the air-BMIMBF4 interface, and the bulk free energies were calculated with the free energy perturbation method. A new polarizable model was also developed for CO2. The air-BMIMBF4 interface had enhanced BMIM density, which was mostly related to its butyl group, followed by enhanced BF4 density a few angstroms towards the liquid bulk. The density profiles were observed to exhibit oscillations between high BMIM and BF4 density, indicating the presence of surface layering induced by the interface. The potential of mean force for CO2 and SO2 showed more negative free energies in regions of enhanced BF4 density, while more positive free energies in regions of high BMIM density. Moreover, these gases showed free energy minimums at the interface, where the BMIM alkyl groups were found to be most prevalent. Our results show the importance of ionic liquid interfacial ordering for understanding gas solvation in them. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparing surface and stratospheric impacts of geoengineering with different SO2 injection strategies

Geoengineering with stratospheric sulfate aerosols can, to some extent, be designed to achieve different climate objectives. Here we use the the state-of-the-art Community Earth System Model, version 1, with the Whole Atmosphere Community Climate Model as its atmospheric component (CESM1(WACCM)), to compare surface climate and stratospheric effects of two geoengineering strategies. In one, SO2 is injected into the tropical lower stratosphere at the equator to keep global mean temperature nearly constant under an RCP8.5 scenario, as has been commonly simulated in previous studies. In another, the Geoengineering Large Ensemble (GLENS), SO2 is injected into the lower stratosphere at four different locations (30°N/S and 15°N/S) to keep global mean temperature, the interhemispheric temperature gradient, and the equator-to-pole temperature gradient nearly unchanged. Both simulations are effective at offsetting changes in global mean temperature and the interhemispheric temperature gradient that result from increased greenhouse gases, but only GLENS offsets changes in the equator-to-pole temperature gradient. GLENS results in a more even aerosol distribution, whereas equatorial injection tends to result in an aerosol peak in the tropics. Many other aspects of surface climate changes, including precipitation and sea ice coverage, also show reduced changes in GLENS as compared to equatorial injection. Stratospheric changes, including heating, circulation, and effects on the quasi-biennial oscillation are greatly reduced in GLENS as compared to equatorial injection.

Kravitz, Benjamin S.↗

Measurements of SO2 absorption coefficients using a tunable dye laser

High-resolution measurements of SO2 absorption coefficients in the UV are presented in the wavelength interval between 2962 and 3011 A using a frequency-doubled dye laser as the radiation source. These measurements have application to pollution monitoring of SO2 using the differential absorption scattering (DAS) technique. The spectral resolution of the measurements was 0.2 A (determined by the linewidth of the dye laser) and the generated spectra exhibited considerable rotational structure on the (000) double prime to (060) prime, (070) prime, and (080) prime electronic-vibrational transitions. The latter transitions correspond to center wavelengths of 3001.8, 2981.0, and 2962 A, respectively. The laser measurements were obtained with a signal-processing technique which eliminated calibration procedures associated with conventional optical-absorption measurements. Using this technique, the statistical uncertainty associated with measured absorption coefficients has been reduced to less than plus or minus 2% with a wavelength uncertainty of the laser source of plus or minus 0.1 A.

Thompson, R. T., Jr.↗

Computer simulation of an aircraft-based differential absorption and scattering system for retrieval of SO2 vertical profiles

The feasibility of using the differential absorption and scattering technique from aircraft altitudes for remotely measuring the vertical distribution of SO2 was studied via a computer simulation. Particular care was taken in this simulation to use system parameters (i.e., laser energy, telescope size, etc.) which can be accommodated on an aircraft and can be realized with commercially available technology. The vertical molecular and aerosol profiles were chosen to simulate the types of profiles which might be experienced over a large city. Results are presented on the retrieval of the assumed SO2 profile which show the effects of systematic errors due to interfering gases and aerosols, as well as random errors due to shot noise in the return signal, detector and background noise, and instrument-generated noise.

Hoell, J. M., Jr.↗

A four-channel portable solar radiometer for measuring particulate and/or aerosol opacity and concentration of NO2 and SO2 in stack plumes

Solar absorption radiometry has been investigated as a method of measuring stackplume effluents. A simple and inexpensive instrument was constructed for observing the sun at four wavelengths: 800, 600, 400, and 310 nm. Higher wavelength channels measured the effect of the particulates and NO2, and an ultraviolet channel measured the contribution of SO2 to the attenuation. Stack-plume measurements of opacity and concentration of NO2 and SO2 were in basic agreement with in-stack measurements. The major limitation on the use of the radiometer is the requirement for an accessible viewing position which allows the sun-plume-observer relationship to be attained. It was concluded that the solar radiometer offers an inexpensive method for monitoring plume effluents when the viewing position is not restricted.

Exton, R. J.↗

Remote sensing of atmospheric SO2 using the differential absorption LIDAR technique

The paper reports an investigation of the capabilities of a UV differential absorption lidar (DIAL) system for remote measurements of sulfur dioxide emissions. Two features of the present DIAL system are an absorption cell permitting the determination of the difference in SO2 absorption coefficients for the two transmitted wavelengths and a calibration cell permitting the linearity and performance of the system to be evaluated. The DIAL technique is described along with the transmitter, receiver, data-adquisition, and data-processing components of the investigated system. Quantitative measurements of the average SO2 concentration in a region surrounding the exhaust stack of a steam-generating plant are discussed which show that the present system has measurement sensitivities of 10 ppb at a range of 0.8 km and 20 ppb at 1.9 km. Based on performance characteristics obtained during a calibration of this system, it is predicted that a measurement sensitivity of less than 4 ppb over a 1-km path will be attained.

Hoell, J. M., Jr.↗

Chemiluminescent reactions of sulfur /3P2/ atoms in cryogenic matrices - S + O2 yields SO2 /a3 B1/

Results are reported for thermoluminescence studies of reactions of sulfur atoms in cryogenically deposited solid argon through in situ photolysis of OCS. Analysis of the thermoluminescence spectrum that resulted from photolysis and heating of matrices in which O2 was codeposited with an OCS/Ar mixture shows that the emitter contained oxygen derived from the added O2 and that little SO2 accumulated during photolysis. The observed absence of thermoluminescence or fluorescence in either of the allowed transitions of excited SO2 is taken as definitive evidence that ground-state sulfur atoms can insert into the oxygen molecule with effectively zero activation energy.

Long, S. R.↗

Fluctuations in SO2 emission during recent eruptions of Etna

The eruptive activity of July-August 1977 of Mt. Etna consisted of four separate, short eruptive episodes. The rate of SO2 emission during these eruptions was monitored using a remote-sensing correlation spectrometer. The obtained data suggest that fluctuations in the SO2 emission rate provide a means for predicting eruptions of Etna. The July-August 1977 eruptions were confined to the North East Crater vent, while continuous degassing occurred from the central vents. The continuous gas plume was blown downwind immediately after it was emitted while the eruption plumes from the North East Crater rose 500-1,000 m before being blown horizontally. Monitoring began on 24 July, immediately after the first eruptive episode had ended, and continued until 27 August.

Malinconico, L. L., Jr.↗

Identification of gaseous SO2 and new upper limits for other gases on Io

The identification of gaseous sulfur dioxide on Io by Voyager 1 is reported, and preliminary upper limits for other atmospheric gases are presented. Averaged spectra taken by the Voyager IRIS experiment in the range of 1,000 to 1,200/cm are interpreted as containing three fundamental sulfur dioxide bands, with intensities most nearly corresponding to an atmospheric model with a sulfur dioxide abundance of 0.2 cm atm. Upper limits for COS, CS2, SO3, H2S, CO2, O3, N2O, H2O, CH4, NH3 and HC1, not detected in the spectra, were calculated on the basis of the radiative transfer equation for temperatures of 130 and 250 K; a depletion of hydrogen, carbon and nitrogen is noted. It is suggested that a SO2 outgassing from a cooling sulfur extrusion is the major source of the observed atmospheric SO2.

Pearl, J.↗

IO - Could SO2 condensation/sublimation cause the sometimes reported post-eclipse brightening

It is shown that each of the three quantifiable brightening characteristics (i.e., amplitude, time-scale /half-life/, and temporal variability) suggests that brightening of Io may be due to condensation and sublimation of SO2 frost. This is concentrated within a region that encompasses both the subsolar points at the time of entrance into and emergence from eclipse, and volcanic sources. Qualitatively and intuitively, an SO2 frost hypothesis is found to provide good possibilities for explaining any variations in Io's ability to brighten, which may occur on a time scale of years.

Fanale, F. P.↗

Gaseous SO2 on Io

The evidence for SO2 on Io is discussed in terms of the thermal infrared and the near infrared. Recent and ongoing work in the ultraviolet is summarized. Charged particle measurements which support the presence of SO2 are presented.

Pearl, J.↗

Autoionization states of SO2

Assignments are reported for the autoionizing states of SO2(+) in the 1020-630 A region. The Rydberg states of SO(+) were observed by the method of molecular beam photoionization mass spectrometry, which ensures that all the states observed are autoionizing in nature. The vibrational progressions obtained are assigned to the 4b2-3s, 4b2-3d, 7a1-3p, 7a1-3d, and 2b1-3p Rydberg states. Dips in the photoionization efficiency curves of SO2(+) and SO(+) correspond to those of a window resonance series previously observed in photoabsorption.

Wu, C. Y. R.↗

Elastic scattering of electrons from SO2

A crossed electron beam-molecular beam scattering geometry and the relative-flow technique are used to measure the ratios of the elastic differential cross sections of SO2 to those of He at electron impact energies of 12, 20, 50, 100, 150, and 200 eV. At each energy, an angular range of 15-150 deg is covered. The ratios are multiplied by previously known He elastic differential cross sections to obtain elastic differential cross sections for SO2. Integral and momentum transfer cross sections are then determined from a knowledge of differential cross sections. With the aid of the two-potential theory of e-molecule scattering, calculations are also performed and compared with the measurements.

Orient, O. J.↗

Kinetics and mechanism of the oxidation of S(IV) by ozone in aqueous solution with particular reference to SO2 conversion in nonurban tropospheric clouds

Results are presented from a laboratory study of the kinetics of the S(IV)-O3 reaction in aqueous solution, including measurements of the effects of UV radiation, dissolved transition metals, and an antioxidant (hydroquinone) on the rate. On the basis of the results, relative rates of S(IV) conversion by O3 in tropospheric cloud water are compared with those predicted for H2O2 and for O2. The reaction mechanism is discussed, with an outline given of the elements of a possible reaction scheme. Application of the rate constants obtained to SO2 conversion in cloud water predicts conversion rates by ozone to be competitive with those by H2O2 at pH above about 4.5 and to dominate at pH above about 5.5. It is pointed out that since these pH's are typical for nonurban tropospheric cloud water, ozone is a potentially important contributor to the overall oxidative conversion of SO2 to sulfate in the nonurban troposphere.

Maahs, H. G.↗

Effects of SO2 and SO3 on the Na2SO4 induced corrosion of nickel

The effects of SO2 and SO3 in the environment on the hot-corrosion behavior of Ni in the temperature range 750-950 C has been studied. Below the melting point of Na2SO4 (884 C), rapid corrosion takes place by formation of a Na2SO4-NiSO4 melt which can penetrate the porous oxide scale and give rise to sulfide information by coming in contact with the metal. The distribution of the sulfides depends on the SO2 level in the ambient gas. Continued corrosion occurs by a sulfidation-oxidation mechanism. At temperatures above the melting point of Na2SO4, accelerated degradation occurs via dissolution of the surface scale, followed by reprecipitation of the oxide in a nonprotective form.

Misra, A. K.↗

The SO2 atmosphere and ionosphere of Io - Ion chemistry, atmospheric escape, and models corresponding to the Pioneer 10 radio occultation measurements

Some numerical models of the SO2 atmosphere and ionosphere of Io at the time of the Pioneer 10 fly-by are calculated. It is shown that the formation of the observed ionosphere in the downstream direction may have required the precipitation of electrons, and that solar EUV radiation alone cannot account for it. In a comparison with Pioneer 10 radio occultation measurements, an electron impact in the range 500-800 eV was found to agree with Pioneer 10 radio occultation data for a SO2 atmosphere with a surface density of 4 x 10 to the 10th per cu cm. The relatively narrow energy range and flux required for incident electrons suggests that a fraction of a torus plasma compresses the ionosphere. It is pointed out on the basis of the model calculations that a weak magnetic field may be associated with Io.

Kumar, S.↗