Search NASA⌕ Search

SEARCH · Search NASA

Results for “sparse data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Application of VISSR Atmospheric Sounder (VAS) data in weather analysis

A technique which analyzes irregularly spaced satellite data is described. An experiment with rawinsonde and VISSR Atmospheric Sounder (VAS) radiance measurements collected on March 6-7, 1982 is conducted to reveal the applicability of the technique. The rawinsonde data are analyzed on a 16 x 12 grid using the two pass analysis scheme of Barnes (1973). A scheme similar to the Barnes (1973) procedure is employed to produce gridded analysis of VAS data over a 200 x 15000 km region in central part of the U.S. The use of a correction pass on the initial gridded field is described; the technique is extremely effective on uniformly spaced observations. The incorporation of the limited fine mesh model to the scheme to analyze data in sparse and cloudy regions is examined. A comparison of rawinsonde data with VAS data is provided. The technique proves effective for studying cloudy and sparse areas with VAS data and produces a four-dimensional data set with significant mesoscale structure.

Jedlovec, G. J.↗
NASA NTRS1988

Data traffic reduction schemes for sparse Cholesky factorizations

Load distribution schemes are presented which minimize the total data traffic in the Cholesky factorization of dense and sparse, symmetric, positive definite matrices on multiprocessor systems with local and shared memory. The total data traffic in factoring an n x n sparse, symmetric, positive definite matrix representing an n-vertex regular 2-D grid graph using n (sup alpha), alpha is equal to or less than 1, processors are shown to be O(n(sup 1 + alpha/2)). It is O(n(sup 3/2)), when n (sup alpha), alpha is equal to or greater than 1, processors are used. Under the conditions of uniform load distribution, these results are shown to be asymptotically optimal. The schemes allow efficient use of up to O(n) processors before the total data traffic reaches the maximum value of O(n(sup 3/2)). The partitioning employed within the scheme, allows a better utilization of the data accessed from shared memory than those of previously published methods.

Naik, Vijay K.↗
NASA NTRS1982

Identification of a precambrian rift through Missouri by digital image processing of geophysical and geological data

A newly discovered feature in the midcontinent - a gravity low that begins at a break in the midcontinent gravity high in SE Nebraska, extends across Missouri in a NW-SE direction, and intersects the Mississippi Valley graben to form the Pascola arch - is discussed. The anomaly varies from 120 to 160 km in width, extends approximately 700 km, and is best expressed in southern Missouri, where it has a Bouguer amplitude of about -34 mGal. It is noted that the magnitude of the anomaly cannot be explained on the basis of a thickened section of Paleozoic sedimentary rock. The gravity data and the sparse seismic refraction data for the region are found to be consistent with an increased crustal thickness beneath the gravity low. It is thought that the gravity anomaly is probably the present expression of a failed arm of a rifting event, perhaps one associated with the spreading that led to or preceded formation of the granite and rhyolite terrain of southern Missouri.

Guinness, E. A.↗
NASA NTRS1972

Assessment of and standardization for quantitative nondestructive test

Present capabilities and limitations of nondestructive testing (NDT) as applied to aerospace structures during design, development, production, and operational phases are assessed. It will help determine what useful structural quantitative and qualitative data may be provided from raw materials to vehicle refurbishment. This assessment considers metal alloys systems and bonded composites presently applied in active NASA programs or strong contenders for future use. Quantitative and qualitative data has been summarized from recent literature, and in-house information, and presented along with a description of those structures or standards where the information was obtained. Examples, in tabular form, of NDT technique capabilities and limitations have been provided. NDT techniques discussed and assessed were radiography, ultrasonics, penetrants, thermal, acoustic, and electromagnetic. Quantitative data is sparse; therefore, obtaining statistically reliable flaw detection data must be strongly emphasized. The new requirements for reusable space vehicles have resulted in highly efficient design concepts operating in severe environments. This increases the need for quantitative NDT evaluation of selected structural components, the end item structure, and during refurbishment operations.

Neuschaefer, R. W.↗
NASA NTRS2019

Poisson vs. Gaussian statistics for sparse X-ray data: Application to the soft X-ray spectrometer

Reliable results when fitting X-ray data require proper consideration of the statistics involved. We probe the impact of Gaussian versus Poisson statistics at low count levels using both the standard χ^(2) method and maximum likelihood based on Poisson (C) statistics. The difference is studied and quantified through simulated spectra with known properties. We then test the results through analysis of Mn Kα calibration data taken with the flight spare microcalorimeter for the Hitomi soft X-ray spectrometer. Through comparison with simulations, our results show that the χ^(2) method tends to give overly optimistic estimates of the detector energy resolution, in particular when there are few counts. Given an energy resolution of ∼5 eV and a line with about 100 photons, the line width becomes ∼10% lower in the χ^(2) method than in Poisson statistics. This is a consequence of the uncertainties being dominated by counting statistics, and therefore highlights the need to choose the appropriate fit statistic.

Shinya Yamada↗
NASA NTRS2014

NASA Tech Briefs, March 2014

Topics include: Data Fusion for Global Estimation of Forest Characteristics From Sparse Lidar Data; Debris and Ice Mapping Analysis Tool - Database; Data Acquisition and Processing Software - DAPS; Metal-Assisted Fabrication of Biodegradable Porous Silicon Nanostructures; Post-Growth, In Situ Adhesion of Carbon Nanotubes to a Substrate for Robust CNT Cathodes; Integrated PEMFC Flow Field Design for Gravity-Independent Passive Water Removal; Thermal Mechanical Preparation of Glass Spheres; Mechanistic-Based Multiaxial-Stochastic-Strength Model for Transversely-Isotropic Brittle Materials; Methods for Mitigating Space Radiation Effects, Fault Detection and Correction, and Processing Sensor Data; Compact Ka-Band Antenna Feed with Double Circularly Polarized Capability; Dual-Leadframe Transient Liquid Phase Bonded Power Semiconductor Module Assembly and Bonding Process; Quad First Stage Processor: A Four-Channel Digitizer and Digital Beam-Forming Processor; Protective Sleeve for a Pyrotechnic Reefing Line Cutter; Metabolic Heat Regenerated Temperature Swing Adsorption; CubeSat Deployable Log Periodic Dipole Array; Re-entry Vehicle Shape for Enhanced Performance; NanoRacks-Scale MEMS Gas Chromatograph System; Variable Camber Aerodynamic Control Surfaces and Active Wing Shaping Control; Spacecraft Line-of-Sight Stabilization Using LWIR Earth Signature; Technique for Finding Retro-Reflectors in Flash LIDAR Imagery; Novel Hemispherical Dynamic Camera for EVAs; 360 deg Visual Detection and Object Tracking on an Autonomous Surface Vehicle; Simulation of Charge Carrier Mobility in Conducting Polymers; Observational Data Formatter Using CMOR for CMIP5; Propellant Loading Physics Model for Fault Detection Isolation and Recovery; Probabilistic Guidance for Swarms of Autonomous Agents; Reducing Drift in Stereo Visual Odometry; Future Air-Traffic Management Concepts Evaluation Tool; Examination and A Priori Analysis of a Direct Numerical Simulation Database for High-Pressure Turbulent Flows; and Resource-Constrained Application of Support Vector Machines to Imagery.

Source record↗
NASA NTRSDate not supplied

TPSAS-NF1676L-35322-DND

This talk discusses emerging methods that seek to fuse and integrate physics-based modeling with machine learning. With the recent rise of machine learning and artificial intelligence, there has been a huge surge in data-driven approaches to solve computational science and engineering problems. However, neglecting a priori knowledge of established physical laws and relying solely on data-driven methods can yield unreliable, less interpretable, and/or non-physical results, especially when data is sparse or predictions are required outside of the training data domain. This two part talk presents two distinct approaches for accelerating predictions with machine learning that are grounded and constrained by relevant physics and their application to problems at NASA.

Julian Cuevas Paniagua↗
NASA NTRS1992

Gravity field improvement using global positioning system data from TOPEX/Poseidon - A covariance analysis

The TOPEX/Poseidon satellite data can be used to improve the knowledge of the earth's gravitational field. The GPS data are especially useful for improving the gravity field over the world's oceans, where the current tracking data are sparse. Using realistic scenario for processing 10 days of GPS data, a covariance analysis is performed to obtain the expected improvement to the GEM-T2 gravity field. The large amount of GPS data and the large number of parameters (1979 parameters for the gravity field, plus carrier-phase biases, etc.) required special filtering techniques for efficient solution. The gravity-bin technique is used to compute the covariance matrix associated with the spherical harmonic gravity field. The covariance analysis shows that the GPS data from one 10-day arc of TOPEX/Poseidon with no a priori constraints can resolve medium degree and order (3-26) parameters with sigmas (standard deviations) that are an order of magnitude smaller than the corresponding sigmas of GEM-T2. When the information from GEM-T2 is combined with the TOPEX/Poseidon GPS measurements, an order-of-magnitude improvement is observed in low- and medium-degree terms with significant improvements spread over a wide range of degree and order.

Bertiger, Willy I.↗
NASA NTRS2007

Solar Occultation Satellite Data and Derived Meteorological Products: Sampling Issues and Comparisons with Aura MLS

Derived Meteorological Products (DMPs, including potential temperature (theta), potential vorticity, equivalent latitude (EqL), horizontal winds and tropopause locations) have been produced for the locations and times of measurements by several solar occultation (SO) instruments and the Aura Microwave Limb Sounder (MLS). DMPs are calculated from several meteorological analyses for the Atmospheric Chemistry Experiment-Fourier Transform Spectrometer, Stratospheric Aerosol and Gas Experiment II and III, Halogen Occultation Experiment, and Polar Ozone and Aerosol Measurement II and III SO instruments and MLS. Time-series comparisons of MLS version 1.5 and SO data using DMPs show good qualitative agreement in time evolution of O3, N2O, H20, CO, HNO3, HCl and temperature; quantitative agreement is good in most cases. EqL-coordinate comparisons of MLS version 2.2 and SO data show good quantitative agreement throughout the stratosphere for most of these species, with significant biases for a few species in localized regions. Comparisons in EqL coordinates of MLS and SO data, and of SO data with geographically coincident MLS data provide insight into where and how sampling effects are important in interpretation of the sparse SO data, thus assisting in fully utilizing the SO data in scientific studies and comparisons with other sparse datasets. The DMPs are valuable for scientific studies and to facilitate validation of non-coincident measurements.

Manney, Gloria↗
NASA NTRS2014

Reevaluation of Stratospheric Ozone Trends From SAGE II Data Using a Simultaneous Temporal and Spatial Analysis

This paper details a new method of regression for sparsely sampled data sets for use with time-series analysis, in particular the Stratospheric Aerosol and Gas Experiment (SAGE) II ozone data set. Non-uniform spatial, temporal, and diurnal sampling present in the data set result in biased values for the long-term trend if not accounted for. This new method is performed close to the native resolution of measurements and is a simultaneous temporal and spatial analysis that accounts for potential diurnal ozone variation. Results show biases, introduced by the way data is prepared for use with traditional methods, can be as high as 10%. Derived long-term changes show declines in ozone similar to other studies but very different trends in the presumed recovery period, with differences up to 2% per decade. The regression model allows for a variable turnaround time and reveals a hemispheric asymmetry in derived trends in the middle to upper stratosphere. Similar methodology is also applied to SAGE II aerosol optical depth data to create a new volcanic proxy that covers the SAGE II mission period. Ultimately this technique may be extensible towards the inclusion of multiple data sets without the need for homogenization.

Damadeo, R. P.↗
NASA NTRS1973

Global detailed gravimetric geoid

A global detailed gravimetric geoid has been computed by combining the Goddard Space Flight Center GEM-4 gravity model derived from satellite and surface gravity data and surface 1 deg-by-1 deg mean free air gravity anomaly data. The accuracy of the geoid is + or - 2 meters on continents, 5 to 7 meters in areas where surface gravity data are sparse, and 10 to 15 meters in areas where no surface gravity data are available. Comparisons have been made with the astrogeodetic data provided by Rice (United States), Bomford (Europe), and Mather (Australia). Comparisons have also been carried out with geoid heights derived from satellite solutions for geocentric station coordinates in North America, the Caribbean, Europe, and Australia.

Vincent, S.↗
NASA NTRS1974

Global detailed gravimetric geoid

A global detailed gravimetric geoid has been computed by combining the Goddard Space Flight Center GEM-4 gravity model derived from satellite and surface gravity data and surface 1 x 1-deg mean free-air gravity anomaly data. The accuracy of the geoid is plus or minus 2 meters on continents, 5 to 7 meters in areas where surface gravity data are sparse, and 10 to 15 meters in areas where no surface gravity data are available. Comparisons have been made with the astrogeodetic data provided by Rice (United States), Bomford (Europe), and Mather (Australia). Comparisons have also been carried out with geoid heights derived from satellite solutions for geocentric station coordinates in North America, the Caribbean, Europe and Australia.

Vincent, S.↗
NASA NTRS1992

Requirements for facilities and measurement techniques to support CFD development for hypersonic aircraft

The design of a hypersonic aircraft poses unique challenges to the engineering community. Problems with duplicating flight conditions in ground based facilities have made performance predictions risky. Computational fluid dynamics (CFD) has been proposed as an additional means of providing design data. At the present time, CFD codes are being validated based on sparse experimental data and then used to predict performance at flight conditions with generally unknown levels of uncertainty. This paper will discuss the facility and measurement techniques that are required to support CFD development for the design of hypersonic aircraft. Illustrations are given of recent success in combining experimental and direct numerical simulation in CFD model development and validation for hypersonic perfect gas flows.

Sellers, William L., III↗
NASA NTRS2005

A Global Map of Mars' Crustal Magnetic Field Based on Electron Reflectometry

One of the great surprises of the Mars Global Surveyor mission was the discovery of intensely magnetized crust. Magnetic sources on Mars are at least ten times stronger than their terrestrial counterparts, probably requiring large volumes of coherently magnetized material, very strong remanence, or both. Although much of the attention so far has been placed on the strong crustal fields in the southern highlands, magnetic sources do exist in the younger low-lying plains. The strength and morphology of these sources could yield clues to the thermal and magnetic history of the northern plains. Low altitude (approx. 100 km) Magnetometer (MAG) data obtained during aerobraking have the greatest spatial resolution and sensitivity for identifying crustal magnetic sources from orbit, but those data are sparse and therefore limit the ability to discern morphology. Fully sampled MAG data obtained in the 400-km altitude mapping orbit have been differenced with respect to latitude (Br/Lat) to minimize the influence of induced fields from the solar wind interaction and thus enhance the sensitivity to weak crustal sources. Here we describe independent results from the Electron Reflectometer (ER), which remotely measures the magnetic field intensity at approx. 170 km altitude, and is roughly seven times more sensitive to crustal magnetic sources than measurements of Br from the mapping orbit.

Mitchell, D. L.↗
NASA NTRSDate not supplied

Utilizing Earth Observations to Understand Landscape Patterns and Assist in Wildlife Management in Iona National Park, Angola

Following the end of the Angolan Civil War (1975-2002), human habitation in Iona National Park has grown exponentially, as has the livestock population. An ongoing drought beginning in 2017 has brought people, livestock, and wildlife into increasing competition for resources within the park. This study used Earth observation data, primarily Landsat and Sentinel imagery, to examine landscape trends to improve wildlife preservation approaches in Iona National Park, Angola. In collaboration with the NGO African Parks, we developed a robust land use and land cover (LULC) classification model using remote sensing data to augment sparse ground-based data in this arid land region. We used Google Earth Engine and a random forest classifier to map vegetation types, water bodies, and potential wildlife habitats. This analysis resulted in a high spatial resolution LULC time-series between 1984-2023, highlighting critical periods of socioecological change over the past 40 years. These results increased the partner’s ability to make scientifically grounded decisions about resource allocation and conservation priorities. This analysis supports the feasibility of applying remote sensing techniques coupled with machine learning models in dry regions, where standard survey methods are frequently limited by accessibility and resource availability. However, we identified limitations in ground-truth data and the difficulty of recognizing certain vegetation types in arid areas. Despite these limitations, the study demonstrated Earth observations' ability to transform wildlife management techniques in distant and data-scarce locations, providing a reproducible foundation for similar ecosystems around the world.

Emmanuel Aklie↗
NASA NTRS1985

Iterative solution of large, sparse linear systems on a static data flow architecture - Performance studies

The applicability of static data flow architectures to the iterative solution of sparse linear systems of equations is investigated. An analytic performance model of a static data flow computation is developed. This model includes both spatial parallelism, concurrent execution in multiple PE's, and pipelining, the streaming of data from array memories through the PE's. The performance model is used to analyze a row partitioned iterative algorithm for solving sparse linear systems of algebraic equations. Based on this analysis, design parameters for the static data flow architecture as a function of matrix sparsity and dimension are proposed.

Reed, D. A.↗
NASA NTRS1999

Constructing Synoptic Maps of Stratospheric Column Ozone from HALOE, SAGE and Balloonsonde Data Using Potential Vorticity Isentropic Coordinate Transformations

In this study we utilize potential vorticity - isentropic (PVI) coordinate transformations as a means of combining ozone data from different sources to construct daily, synthetic three-dimensional ozone fields. This methodology has been used successfully to reconstruct ozone maps in particular regions from aircraft data over the period of the aircraft campaign. We expand this method to create high-resolution daily global maps of profile ozone data, particularly in the lower stratosphere, where high-resolution ozone data are sparse. Ozone climatologies in PVI-space are constructed from satellite-based SAGE II and UARS/HALOE data, both of which-use solar occultation techniques to make high vertical resolution ozone profile measurements, but with low spatial resolution. A climatology from ground-based balloonsonde data is also created. The climatologies are used to establish the relationship between ozone and dynamical variability, which is defined by the potential vorticity (in the form of equivalent latitude) and potential temperature fields. Once a PVI climatology has been created from data taken by one or more instruments, high-resolution daily profile ozone field estimates are constructed based solely on the PVI fields, which are available on a daily basis from NCEP analysis. These profile ozone maps could be used for a variety of applications, including use in conjunction with total ozone maps to create a daily tropospheric ozone product, as input to forecast models, or as a tool for validating independent ozone measurements when correlative data are not available. This technique is limited to regions where the ozone is a long-term tracer and the flow is adiabatic. We evaluate the internal consistency of the technique by transforming the ozone back to physical space and comparing to the original profiles. Biases in the long-term average of the differences are used to identify regions where the technique is consistently introducing errors. Initial results show the technique is useful in the lower stratosphere at most latitudes throughout the year,and in the winter hemisphere in the middle stratosphere. The results are problematic in the summer hemisphere middle stratosphere due to increased ozone photochemistry and weak PV gradients. Alternate techniques in these regions will be discussed. An additional limitation is the quality and resolution of the meteorological data.

Hollandsworth, Stacey M.↗
NASA NTRS1991

Heart-Lung Interactions in Aerospace Medicine

Few of the heart-lung interactions that are discussed have been studied in any detail in the aerospace environment, but is seems that many such interactions must occur in the setting of altered accelerative loadings and pressure breathing. That few investigations are in progress suggests that clinical and academic laboratory investigators and aerospace organizations are further apart than during the pioneering work on pressure breathing and acceleration tolerance in the 1940s. The purpose is to reintroduce some of the perennial problems of aviation physiology as well as some newer aerospace concerns that may be of interest. Many possible heart-lung interactions are pondered, by necessity often drawing on data from within the aviation field, collected before the modern understanding of these interactions developed, or on recent laboratory data that may not be strictly applicable. In the field of zero-gravity effects, speculation inevitably outruns the sparse available data.

Guy, Harold J. B.↗